arXiv subjects

Aarno Pärssinen

Publications and source records attributed to Aarno Pärssinen.

6 recordsLinked to original sources

arXiv2026

Far-Field Absolute Gain Antenna Measurements at Sub-THz Frequencies: A New Interpretation

The evolution of large aperture antennas and arrays at the sub-THz band (100-300 GHz) results in traditional far-field (FF) gain measurements to require large distances due to the high frequency nature making them impractical in many laboratory environments. In the presented work, absolute antenna gain measurements are performed in localized distance clusters for commercial horn antennas in the sub-THz range of 145-170 GHz using the three-antenna method, leveraging a theoretically derived modified FF equation along with the Friis transmission equation to enable a compact measurement setup. By applying the proposed modified FF formulation, the approach aims to redefine the FF distance by considering the combined effects of both the transmitting and receiving antennas, accounting for their aperture sizes and radiation characteristics. This allows precise gain characterization within a compact measurement footprint. The proposed theoretical model was validated through radiated measurements and simulations, demonstrating its effectiveness in this case study. Also, measurements were performed using dissimilar antenna pair combinations due to inventory constraints, a common challenge both in research and in industry. Despite the mismatches, the presented work demonstrates that reliable and sufficiently accurate measurement results can still be achieved. This highlights the practical feasibility of the compact cluster measurement technique without compromising measurement integrity. The compact setup ensures efficiency in the measurement time and cost, making it a robust solution for both research and industrial needs in sub-THz antenna characterization for applications including 6G, high frequency sensing, and imaging systems.

eess.SY↗

arXiv2025

Cross-layer Integrated Sensing and Communication: A Joint Industrial and Academic Perspective

Integrated sensing and communication (ISAC) enables radio systems to simultaneously sense and communicate with their environment. This paper, developed within the Hexa-X-II project funded by the European Union, presents a comprehensive cross-layer vision for ISAC in 6G networks, integrating insights from physical-layer design, hardware architectures, AI-driven intelligence, and protocol-level innovations. We begin by revisiting the foundational principles of ISAC, highlighting synergies and trade-offs between sensing and communication across different integration levels. Enabling technologies (such as multiband operation, massive and distributed MIMO, non-terrestrial networks, reconfigurable intelligent surfaces, and machine learning) are analyzed in conjunction with hardware considerations including waveform design, synchronization, and full-duplex operation. To bridge implementation and system-level evaluation, we introduce a quantitative cross-layer framework linking design parameters to key performance and value indicators. By synthesizing perspectives from both academia and industry, this paper outlines how deeply integrated ISAC can transform 6G into a programmable and context-aware platform supporting applications from reliable wireless access to autonomous mobility and digital twinning.

eess.SP↗

arXiv2023

Integration of Second-Order Bandstop Filter Into a Dual-Polarized 5G Millimeter-Wave Magneto-Electric Dipole Antenna

This communication proposes a dual-wideband differentially fed dual-polarized magnetoelectric (ME) dipole with second-order bandstop filtering for millimeter-wave (mm-Wave) applications at 24.25-29.5 GHz and 37-43.5 GHz. Without disturbing the complementary antenna operation, two resonator types (hairpin and coupled λ/4 open-/short-circuited stub resonators), are embedded into the wideband ME dipole to create two transmission poles and two zeros for sharp band-edge selectivity. This allows independent manipulation of the transmission poles and zeros and a compact ME dipole size. Across the operating band, the symmetric filtering antenna design has more than 31.6 dB of port-to-port isolation. Measured results show symmetrical E- and H-plane radiation patterns and cross-polarization levels lower than -25.1 dB. The measured gains of the single element and a 2x2 array are 8.3 dBi and 12.5 dBi, respectively. Also, the band rejection reaches 23.7 dB and 21.8 dB for single element and array, respectively.

eess.SY↗

arXiv2023

Waveforms for sub-THz 6G: Design Guidelines

The projected sub-THz (100 - 300 GHz) part of the upcoming 6G standard will require a careful design of the waveform and choice of slot structure. Not only that the design of the physical layer for 6G will be driven by ambitious system performance requirements, but also hardware limitations, specific to sub-THz frequencies, pose a fundamental design constraint for the waveform. In this contribution, general guidelines for the waveform design are given, together with a non-exhaustive list of exemplary waveforms that can be used to meet the design requirements.

eess.SP↗

arXiv2022

6G Radio Requirements to Support Integrated Communication, Localization, and Sensing

6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware architectures, and on deployments. Based on this, system solutions can be identified that can support several use cases simultaneously. Since there are several ways to meet the KPIs, there is no unique solution and preferable configurations will be discussed.

eess.SP↗

arXiv2017

Where, When, and How mmWave is Used in 5G and Beyon

Wireless engineers and business planners commonly raise the question on where, when, and how millimeter-wave (mmWave) will be used in 5G and beyond. Since the next generation network is not just a new radio access standard, but instead an integration of networks for vertical markets with diverse applications, answers to the question depend on scenarios and use cases to be deployed. This paper gives four 5G mmWave deployment examples and describes in chronological order the scenarios and use cases of their probable deployment, including expected system architectures and hardware prototypes. The paper starts with 28 GHz outdoor backhauling for fixed wireless access and moving hotspots, which will be demonstrated at the PyeongChang winter Olympic games in 2018. The second deployment example is a 60 GHz unlicensed indoor access system at the Tokyo-Narita airport, which is combined with Mobile Edge Computing (MEC) to enable ultra-high speed content download with low latency. The third example is mmWave mesh network to be used as a micro Radio Access Network (μ-RAN), for cost-effective backhauling of small-cell Base Stations (BSs) in dense urban scenarios. The last example is mmWave based Vehicular-to-Vehicular (V2V) and Vehicular-to-Everything (V2X) communications system, which enables automated driving by exchanging High Definition (HD) dynamic map information between cars and Roadside Units (RSUs). For 5G and beyond, mmWave and MEC will play important roles for a diverse set of applications that require both ultra-high data rate and low latency communications.

cs.NI↗