arXiv subjects

Aashia Rahman

Publications and source records attributed to Aashia Rahman.

6 recordsLinked to original sources

arXiv2026

Comparative analysis of fiber Bragg grating filter losses inscribed by continuous wave UV and femtosecond-IR lasers for astrophotonics

Fiber Bragg grating (FBG) filters have been demonstrated as promising components in astrophotonic instrumentation for near-infrared ground-based observations. Given the photon-starved nature of astronomical applications, it is critical to minimize insertion losses across astrophotonic components. In addition to the insertion loss (IL) introduced by specialty fibers and inscription techniques, FBGs exhibit cladding mode (CM) losses. In this work, we studied the loss characteristics of five filter lines in three photosensitive fibers, i.e., a low-numerical-aperture (NA) fiber, a high-NA bend-insensitive fiber, and a cladding-mode-suppressed (CMS) fiber, and in a non-photosensitive fiber, SMF-28. The filters were inscribed using two phase mask-based illumination methods: a continuous wave ultraviolet (UV) laser with a complex phase mask allowing for multi-channel filters, and a femtosecond infrared (fs-IR) laser with phase mask integrated shaping apertures for spectral profile control. Our results show that UV-inscribed gratings in high-NA bend-insensitive fiber yield the lowest CM losses ($\approx$ 0.5 dB) among photosensitive fibers, but exhibit the highest IL (4.6 dB), and FBGs in non-photosensitive SMF-28 fiber, inscribed with fs-IR, achieve the lowest IL (< 0.05 dB) with a comparatively higher CM loss (0.93 dB). To reduce the high IL in high-NA fiber, we explored tapering and bridging methods and report that bridging reduces IL by $\sim$ 3 dB. We show that both filter platforms remain viable for integration into an astrophotonic system, with IL below 1 dB. Finally, we propose a compact bridge-fiber scheme with the potential to further reduce IL to below 0.5 dB while reducing the number of bridging fibers and, consequently, the number of splice junctions by 50%.

astro-ph.IM↗

arXiv2026

Qualification pathways for Photonic Integrated Circuits in Astrophotonic Space Missions

Photonic integrated circuits (PICs) promise order-of-magnitude reductions in the size, weight and power (SWaP) of optical subsystems for astronomy, planetary and Earth-observation missions, yet no PIC-specific space-qualification standard exists. This paper consolidates the principal NASA and ESA qualification documents that apply, or can be tailored, to astrophotonic PICs --- arrayed waveguide gratings, photonic lanterns, fibre Bragg gratings, and integrated beam combiners (ABCD, discrete beam combiners, nullers) for spectrographs and stellar interferometers. A master qualification table lists 19 standard test steps with applicable standards and EU/USA test facilities. Two reference mission profiles --- a LEO smallsat demonstrator and an HWO-class Lagrange-2 flagship --- yield a tailoring matrix, while a TRL-versus-test-coverage roadmap maps each activity onto the NASA/ESA readiness levels and review gates. A survey of UV/visible/near-infrared platforms relates spectral coverage, maturity and flight heritage, and a radiation-effects summary shows passive silica, Si3N4 and laser-written cores are essentially radiation-tolerant while active III--V and Ge devices carry the hardness burden. The central outcome is a seven-phase qualification template (PIC-SQT) with explicit TRL gates, exact test procedures and mission-class tailoring; we further identify qualification processes relevant to PICs that current standards do not cover, and document 40+ years of optical-fibre flight heritage.

astro-ph.IM↗

arXiv2025

Temperature-compensating package for OH line filters for astronomy: II. manufacture, assembly, and performance study

Multi-channel aperiodic fiber Bragg grating (FBG) based hydroxyl (OH) line filters have attracted significant interest in ground-based near-infrared (NIR) astronomical observations. In this paper, we present the performance of a new self-compensating enclosure for the filters, that can be used in non-temperature-controlled environments. Our prototype encloses a 110 mm long single-mode photosensitive optical fiber with three 10 mm filter gratings. A fourth grating was used as a reference outside the package to measure the uncompensated wavelength shift. The prototype was tested over three thermal cycles, and showed a maximum wavelength deviation of 12 pm, a wavelength drift of only 0.37 pm/$^{\circ}$C, over the temperature range of -17$^{\circ}$C to 15$^{\circ}$C. The athermalization factor, i.e., the ratio of the maximum wavelength shift of the compensated grating to the uncompensated reference filter grating was $\frac{1}{22}$. The results demonstrate the capability of the prototype for stabilizing multi-channel long-length FBGs or chirped FBGs, particularly for astronomical applications that require sub-picometer stability.

astro-ph.IM↗

arXiv2024

Athermal package for OH suppression filters in astronomy part 1: design

We present the design of an athermal package for fiber Bragg grating (FBG)filters fabricated at our Institute for use in ground-based near-infrared (NIR) telescopes. Aperiodic multichannel FBG filters combined with photonic lanterns can effectively filter out extremely bright atmospheric hydroxyl (OH) emission lines that severely hinder ground-based NIR observations. While FBGs have the capability of filtering specific wavelengths with high precision, due to their sensitivity to temperature variations, the success in their performance as OH suppression filters depends on a suitable athermal package that can maintain the deviations of the FBG wavelengths from that of the OH emission lines within sub-picometer accuracy over a temperature range of about 40 K. (i.e. 263 K to 303 K). We aim to develop an athermal package over the aforementioned temperature range for an optical fiber consisting of multichannel FBGs for a maximum filter length of 110 mm. In this work, we demonstrate the complete design methodology of such a package. First, we developed a custom-built test rig to study a wide range of critical physical properties of the fiber, such as strain and temperature sensitivities, elastic modulus, optimum fiber pre-tension, and adhesion performance.Next, we used these data to confirm the athermal response of an FBG bonded on the test rig from room temperature to 313 K. Based on this study, we developed a computer-aided design (CAD) model of the package and analyzed its athermal characteristics with a suitable selection of materials and their nominal dimensions using finite element analysis (FEA). We finally discuss the novel aspects of the design to achieve high-precision thermal stabilization of these filters in the temperature range of interest.

astro-ph.IM↗

arXiv2023

Astrophotonics: photonic integrated circuits for astronomical instrumentation

Photonic Integrated Circuits (PIC) are best known for their important role in the telecommunication sector, e.g. high speed communication devices in data centers. However, PIC also hold the promise for innovation in sectors like life science, medicine, sensing, automotive etc. The past two decades have seen efforts of utilizing PIC to enhance the performance of instrumentation for astronomical telescopes, perhaps the most spectacular example being the integrated optics beam combiner for the interferometer GRAVITY at the ESO Very Large Telescope. This instrument has enabled observations of the supermassive black hole in the center of the Milky Way at unprecedented angular resolution, eventually leading to the Nobel Price for Physics in 2020. Several groups worldwide are actively engaged in the emerging field of astrophotonics research, amongst them the innoFSPEC Center in Potsdam, Germany. We present results for a number of applications developed at innoFSPEC, notably PIC for integrated photonic spectrographs on the basis of arrayed waveguide gratings and the PAWS demonstrator (Potsdam Arrayed Waveguide Spectrograph), PIC-based ring resonators in astronomical frequency combs for precision wavelength calibration, discrete beam combiners (DBC) for large astronomical interferometers, as well as aperiodic fiber Bragg gratings for complex astronomical filters and their possible derivatives in PIC.

astro-ph.IM↗

arXiv2020

Complex phase masks for fabricating OH-suppression filters for astronomy

The design of a complex phase mask (CPM) for inscribing aperiodic filters in fibers is presented. The complex structure of the mask surface relief consists of discrete aperiodic phase-steps at periodic intervals. We show that the diffraction of the inscribing laser beam from the phase-step locations of the CPM produces periodically located half phase-steps along the fiber. The accumulated phase, along with controlled index modulation, generates the desired aperiodic reflection spectrum. Compared to a complex 'running-light' interferometry based inscription method, CPM offers the well known convenience and reproducibility of the standard phase mask inscription technique. The complexity of an aperiodic grating is encoded into the structure of the CPM. Complex filters fabricated with CPM can be used for suppressing the near infrared (NIR) OH- emission lines generated in the upper atmosphere, improving the performance of ground based telescopes.

astro-ph.IM↗