arXiv subjects

Aashish A. Clerk

Publications and source records attributed to Aashish A. Clerk.

At least 91 records · Page 5Linked to original sources

arXiv2018

Non-Hermitian Quantum Sensing: Fundamental Limits and Non-Reciprocal Approaches

Unconventional properties of non-Hermitian systems, such as the existence of exceptional points, have recently been suggested as a resource for sensing. The impact of noise and utility in quantum regimes however remains unclear. In this work, we analyze the parametric-sensing properties of linear coupled-mode systems that are described by effective non-Hermitian Hamiltonians. Our analysis fully accounts for noise effects in both classical and quantum regimes, and also fully treats a realistic and optimal measurement protocol based on coherent driving and homodyne detection. Focusing on two-mode devices, we derive fundamental bounds on the signal power and signal-to-noise ratio for any such sensor. We use these to demonstrate that enhanced signal power requires gain, but not necessarily any proximity to an exceptional point. Further, when noise is included, we show that non-reciprocity is a powerful resource for sensing: it allows one to exceed the fundamental bounds constraining any conventional, reciprocal sensor. We analyze simple two-mode non-reciprocal sensors that allow this parametrically-enhanced sensing, but which do not involve exceptional point physics.

quant-ph↗

arXiv2017

Stroboscopic qubit measurement with squeezed illumination

Microwave squeezing represents the ultimate sensitivity frontier for superconducting qubit measurement. However, observation of enhancement has remained elusive, in part because integration with conventional dispersive readout pollutes the signal channel with antisqueezed vacuum. Here we induce a stroboscopic light-matter coupling with superior squeezing compatibility, and observe an increase in the room-temperature signal-to-noise ratio of 24%. Squeezing the orthogonal phase controls measurement backaction, slowing dephasing by a factor of 1.8. This protocol enables the practical use of microwave squeezing for qubit state measurement.

quant-ph↗

arXiv2017

Quantitative tomography for continuous variable quantum systems

We present a continuous variable tomography scheme that reconstructs the Husimi Q-function (Wigner function) by Lagrange interpolation, using measurements of the Q-function (Wigner function) at the Padua points, the optimal sampling points for two dimensional reconstruction. Our approach drastically reduces the number of measurements required compared to using equidistant points on a regular grid, although reanalysis of such experiments is possible. The reconstruction algorithm produces a reconstructed function with exponentially decreasing error and quasi-linear runtime in the number of Padua points. Moreover, using the interpolating polynomial of the Q-function, we present a technique to directly estimate the density matrix elements of the continuous variable state, with only linear propagation of input measurement error. Furthermore, we derive a state-independent analytical bound on this error, such that our estimate of the density matrix is accompanied by a measure of its uncertainty.

quant-ph↗

arXiv2017

Enhanced qubit readout using locally-generated squeezing and inbuilt Purcell-decay suppression

We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high- fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally-generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.

quant-ph↗

arXiv2017

Shortcuts to adiabaticity in the presence of a continuum: applications to itinerant quantum state transfer

We present a method for accelerating adiabatic protocols for systems involving a coupling to a continuum, one that cancels both non-adiabatic errors as well as errors due to dissipation. We focus on applications to a generic quantum state transfer problem, where the goal is to transfer a state between a single level or mode, and a propagating temporal mode in a waveguide or transmission line. Our approach enables perfect adiabatic transfer protocols in this setup, despite a finite protocol speed and a finite waveguide coupling. Our approach even works in highly constrained settings, where there is only a single time-dependent control field available.

quant-ph↗

arXiv2017

Shelving-style QND phonon-number detection in quantum optomechanics

We propose a new method for optomechanical quantum non-demolition (QND) detection of phonon number, based on a "shelving" style measurement. The scheme uses a two-mode optomechanical system where the frequency splitting of the two photonic modes is near-resonant with the mechanical frequency. The combination of a strong optical drive and the underlying nonlinear optomechanical interaction gives rise to spin-like dynamics which facilitate the measurement. This approach allows phonon number measurement to be accomplished parametrically faster than in other schemes which are restricted to weak driving. The ultimate power of the scheme is controlled by the size of the single photon optomechanical cooperativity.

quant-ph↗

arXiv2016

Systematic Magnus-based approach for suppressing leakage and non-adiabatic errors in quantum dynamics

We present a systematic, perturbative method for correcting quantum gates to suppress errors that take the target system out of a chosen subspace. It addresses the generic problem of non-adiabatic errors in adiabatic evolution and state preparation, as well as general leakage errors due to spurious couplings to undesirable states. The method is based on the Magnus expansion: by correcting control pulses, we modify the Magnus expansion of an initially-given, imperfect unitary in such a way that the desired evolution is obtained. Applications to adiabatic quantum state transfer, superconducting qubits and generalized Landau-Zener problems are discussed.

quant-ph↗

arXiv2016

Generalized nonreciprocity in an optomechanical circuit via synthetic magnetism and reservoir engineering

Synthetic magnetism has been used to control charge neutral excitations for applications ranging from classical beam steering to quantum simulation. In optomechanics, radiation-pressure-induced parametric coupling between optical (photon) and mechanical (phonon) excitations may be used to break time-reversal symmetry, providing the prerequisite for synthetic magnetism. Here we design and fabricate a silicon optomechanical circuit with both optical and mechanical connectivity between two optomechanical cavities. Driving the two cavities with phase-correlated laser light results in a synthetic magnetic flux, which in combination with dissipative coupling to the mechanical bath, leads to nonreciprocal transport of photons with 35dB of isolation. Additionally, optical pumping with blue-detuned light manifests as a particle non-conserving interaction between photons and phonons, resulting in directional optical amplification of 12dB in the isolator through direction. These results indicate the feasibility of utilizing optomechanical circuits to create a more general class of nonreciprocal optical devices, and further, to enable novel topological phases for both light and sound on a microchip.

physics.optics↗

arXiv2016

Accelerated quantum control using superadiabatic dynamics in a solid-state lambda system

Adiabatic evolutions find widespread utility in applications to quantum state engineering, geometric quantum computation, and quantum simulation. Although offering robustness to experimental imperfections, adiabatic processes are susceptible to decoherence due to their long evolution time. A general strategy termed "shortcuts to adiabaticity" (STA) aims to remedy this vulnerability by designing fast dynamics to reproduce the results of slow, adiabatic evolutions. Here, we implement a novel STA technique known as "superadiabatic transitionless driving" (SATD) to speed up stimulated Raman adiabatic passage (STIRAP) in a solid-state lambda (Λ) system. Utilizing optical transitions to a dissipative excited state in the nitrogen-vacancy (NV) center in diamond, we demonstrate the accelerated performance of different shortcut trajectories for population transfer and for the initialization and transfer of coherent superpositions. We reveal that SATD protocols exhibit robustness to dissipation and experimental uncertainty, and can be optimized when these effects are present. These results motivate STA as a promising tool for controlling open quantum systems comprising individual or hybrid nanomechanical, superconducting, and photonic elements in the solid state.

cond-mat.mes-hall↗

arXiv2016

Topological quantum fluctuations and travelling wave amplifiers

It is now well-established that photonic systems can exhibit topological energy bands; similar to their electronic counterparts, this leads to the formation of chiral edge modes which can be used to transmit light in a manner that is protected against back-scattering. While it is understood how classical signals can propagate under these conditions, it is an outstanding important question how the quantum vacuum fluctuations of the electromagnetic field get modified in the presence of a topological band structure. We address this challenge by exploring a setting where a non-zero topological invariant guarantees the presence of a parametrically-unstable chiral edge mode in a system with boundaries, even though there are no bulk-mode instabilities. We show that one can exploit this to realize a topologically protected, quantum-limited travelling-wave parametric amplifier. The device is naturally protected both against internal losses and back-scattering; the latter feature is in stark contrast to standard travelling wave amplifiers. This adds a new example to the list of potential quantum devices that profit from topological transport.

cond-mat.mes-hall↗

arXiv2016

Quantum backaction and noise interference in asymmetric two-cavity optomechanical systems

We study the effect of cavity damping asymmetries on backaction in a "membrane-in-the-middle" optomechanical system, where a mechanical mode modulates the coupling between two photonic modes. We show that in the adiabatic limit, this system generically realizes a dissipative optomechanical coupling, with an effective position-dependent photonic damping rate. The resulting quantum noise interference can be used to ground-state cool a mechanical resonator in the unresolved sideband regime. We explicitly demonstrate how quantum noise interference controls linear backaction effects, and show that this interference persists even outside the adiabatic limit. For a one-port cavity in the extreme bad-cavity limit, the interference allows one to cancel all linear backaction effects. This allows continuous measurements of position-squared, with no stringent constraints on the single-photon optomechanical coupling strength. In contrast, such a complete cancellation is not possible in the good cavity limit. This places strict bounds on the optomechanical coupling required for quantum non-demolition measurements of mechanical energy, even in a one-port device.

quant-ph↗

arXiv2016

Quantum heat engine based on photon-assisted Cooper pair tunneling

We propose and analyze a simple mesoscopic quantum heat engine that exhibits both high-power and high-efficiency. The system consists of a biased Josephson junction coupled to two microwave cavities, with each cavity coupled to a thermal bath. Resonant Cooper pair tunneling occurs with the exchange of photons between cavities, and a temperature difference between the baths can naturally lead to a current against the voltage, and hence work. As a consequence of the unique properties of Cooper-pair tunneling, the heat current is completely separated from the charge current. This combined with the strong energy-selectivity of the process leads to an extremely high efficiency.

cond-mat.mes-hall↗

arXiv2016

Negative Full Counting Statistics Arise From Interference Effects

The Keldysh-ordered full counting statistics is a quasi-probability distribution describing the fluctuations of a time-integrated quantum observable. While it is well known that this distribution can fail to be positive, the interpretation and origin of this negativity has been somewhat unclear. Here, we show how the full counting statistics can be tied to trajectories through Hilbert space, and how this directly connects negative quasi-probabilities to an unusual interference effect. Our findings are illustrated with the example of energy fluctuations in a driven bosonic resonator; we discuss how negative quasi-probability here could be detected experimentally using superconducting microwave circuits.

cond-mat.mes-hall↗

arXiv2015

Speeding up adiabatic quantum state transfer by using dressed states

We develop new pulse schemes to significantly speed up adiabatic state transfer protocols. Our general strategy involves adding corrections to an initial control Hamiltonian which harness non-adiabatic transitions. These corrections define a set of dressed states that the system follows exactly during the state transfer. We apply this approach to STIRAP protocols and show that a suitable choice of dressed states allows one to design fast protocols that do not require additional couplings, while simultaneously minimizing the occupancy of the "intermediate" level.

cond-mat.mes-hall↗

arXiv2015

Enhanced nonlinear interactions in quantum optomechanics via mechanical amplification

We present an approach for exponentially enhancing the single-photon coupling strength in an optomechanical system using only additional linear resources. It allows one to reach the quantum nonlinear regime of optomechanics, where nonlinear effects are observed at the single photon level, even if the bare coupling strength is much smaller than the mechanical frequency and cavity damping rate. Our method is based on using a large amplitude, strongly detuned mechanical parametric drive to amplify mechanical zero-point fluctuations and hence enhance the radiation pressure interaction. It has the further benefit of allowing time-dependent control, enabling pulsed schemes. For a two-cavity optomechanical setup, we show that our scheme generates photon blockade for experimentally accessible parameters, and even makes the production of photonic states with negative Wigner functions possible. We discuss how our method is an example of a more general strategy for enhancing boson-mediated two-particle interactions and nonlinearities.

quant-ph↗

arXiv2015

Heisenberg-limited qubit readout with two-mode squeezed light

We show how to use two-mode squeezed light to exponentially enhance cavity-based dispersive qubit measurement. Our scheme enables true Heisenberg-limited scaling of the measurement, and crucially, is not restricted to small dispersive couplings or unrealistically long measurement times. It involves coupling a qubit dispersively to two cavities, and making use of a symmetry in the dynamics of joint cavity quadratures (a so-called quantum-mechanics-free subsystem). We discuss the basic scaling of the scheme and its robustness against imperfections, as well as a realistic implementation in circuit quantum electrodynamics.

quant-ph↗

arXiv2015

Topological phase transitions and chiral inelastic transport induced by the squeezing of light

We show how the squeezing of light can lead to the formation of topological states. Such states are characterized by non-trivial Chern numbers, and exhibit protected edge modes which give rise to chiral elastic and inelastic photon transport. These topological bosonic states are not equivalent to their fermionic (topological superconductor) counterparts and cannot be mapped by a local transformation onto topological states found in particle-conserving models. They thus represent a new type of topological system. We study this physics in detail in the case of a Kagome lattice model, and discuss possible realizations using nonlinear photonic crystals or superconducting circuits.

cond-mat.mes-hall↗

arXiv2015

Real photons from vacuum fluctuations in optomechanics: the role of polariton interactions

We study nonlinear interactions in a strongly driven optomechanical cavity, in regimes where the interactions give rise to resonant scattering between optomechanical polaritons and are thus strongly enhanced. We use a Keldysh formulation and self-consistent perturbation theory, allowing us to include self energy diagrams at all orders in the interaction. Our main focus is understanding how non-equilibrium effects are modified by the polariton interactions, in particular the generation of non-zero effective polariton temperatures from vacuum fluctuations (both in the incident cavity drive and in the mechanical dissipation). We discuss how these effects could be observed in the output spectrum of the cavity. Our work also provides a technical toolkit that will be useful for studies of more complex optomechanical systems.

quant-ph↗