Searcharxiv⌕ Search

arXiv subjects

Abbas Moradi Bilondi

Publications and source records attributed to Abbas Moradi Bilondi.

2 recordsLinked to original sources

Linear stability analysis of particle-laden Couette-Poiseuille flows: effect of porous walls

The current study presents a three-dimensional linear stability analysis of particle-laden Couette-Poiseuille flow suspended in a Newtonian fluid between two parallel plates, with the lower plate coated by a porous medium. The influence of suspended particles is examined using a two-domain formulation in which particles are confined to the fluid layer and do not penetrate the porous substrate. The particle-laden suspension is modeled using the dusty-gas framework, while the flow within the porous layer is described by the volume-averaged Navier-Stokes (VANS) equations. In particle-laden flows over impermeable walls, particle inertia may either stabilize or destabilize the flow depending on the governing parameters. In contrast, the presence of a porous layer introduces an additional permeability-dependent destabilizing mechanism that fundamentally modifies these classical trends. Consequently, particle loading can reduce the critical Reynolds number at sufficiently high permeability, even in parameter regimes where particles stabilize the corresponding rigid-wall flow. The coupled formulation also introduces additional disturbance branches associated with fluid-particle coupling near the permeable interface. Although these modes remain stable across the parameter space investigated, they modify the eigenspectrum and influence the dominant instability by altering coupling pathways. Furthermore, unlike impermeable-wall Couette-Poiseuille flow, where increasing the Couette component generally stabilizes the flow, the porous-wall configuration exhibits a monotonic decrease in the critical Reynolds number over the range examined. These results demonstrate that porous boundaries can fundamentally alter established stability behavior in particle-laden shear flows through permeability-dependent coupling between the suspension and the porous substrate.

physics.flu-dyn↗

Turbulent convection in emulsions: the Rayleigh-Bénard configuration

This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The Rayleigh, Prandtl, Weber, and Froude numbers are held constant at $10^8$, $4$, $6000$, and $1$, respectively. Initially, when both fluids share the same properties, a 10\% Nusselt number increase is observed at the highest volume fractions. In this case, despite a reduction in turbulent kinetic energy, droplets enhance energy transfer to smaller scales, smaller than those of single-phase flow, promoting local mixing. By varying viscosity ratios, while maintaining a constant Rayleigh number based on the average mixture properties, the global heat transfer rises by approximately 25\% at $\Upphi=0.2$ and $λ_μ=10$. This is attributed to increased small-scale mixing and turbulence in the less viscous carrier phase. In addition, a dispersed phase with higher thermal diffusivity results in a 50\% reduction in the Nusselt number compared to the single-phase counterpart, owing to faster heat conduction and reduced droplet presence near walls. The study also addresses droplet-size distributions, confirming two distinct ranges dominated by coalescence and breakup with different scaling laws.

physics.flu-dyn↗