arXiv subjects

Abdu Saif

Publications and source records attributed to Abdu Saif.

17 recordsLinked to original sources

arXiv2023

Climate-Resilient UAVs: Enhancing Energy-Efficient B5G Communication in Harsh Environments

This paper explores the crucial role of Unmanned Aerial Vehicles (UAVs) in advancing Beyond Fifth Generation (B5G) communication networks, especially in adverse weather conditions like rain, fog, and snow. The study investigates the synergy between climate-resilient UAVs and energy-efficient B5G communication. Key findings include the impact of weather elements on UAV coverage and communication dynamics. The research demonstrates significant enhancements in energy efficiency, reduced interference, increased data transmission rates, and optimal channel gain under various weather conditions. Overall, this paper emphasizes the potential of climate-resilient UAVs to improve energy-efficient B5G communication and highlights technology's role in mitigating climate change's impact on communication systems, promoting sustainability and resilience.

eess.SP↗

arXiv2023

Comprehensive Investigation and Evaluation of an Indoor 3D System Performance Based on Visible Light Communication

The abstract discusses the significance of Visible Light Communication (VLC) as an efficient and cost-effective solution in the era of green technology. VLC not only provides illumination but also high-speed data transmission through existing infrastructure, making it ideal for indoor positioning systems (IPS) with minimal interference with the Radio Frequency (RF) spectrum and enhanced security. While previous research has mainly focused on positioning accuracy, this paper delves into the performance evaluation of a VLC-based indoor system. The study examines key performance parameters, namely Signal-to-Noise Ratio (SNR) and path loss, in a Line of Sight (LOS) scenario. It employs a single LED and ten different photodiode (PD) locations in a 3D room. MATLAB simulations demonstrate the system's effectiveness, achieving a good SNR with low path loss. Additionally, the research highlights the importance of optimizing the PD's position to maximize signal strength while minimizing noise and losses.

eess.SY↗

arXiv2023

Meta-Analysis and Systematic Review for Anomaly Network Intrusion Detection Systems: Detection Methods, Dataset, Validation Methodology, and Challenges

Intrusion detection systems (IDSs) built on artificial intelligence (AI) are presented as latent mechanisms for actively detecting fresh attacks over a complex network. Although review papers are used the systematic review or simple methods to analyse and criticize the anomaly NIDS works, the current review uses a traditional way as a quantitative description to find current gaps by synthesizing and summarizing the data comparison without considering algorithms performance. This paper presents a systematic and meta-analysis study of AI for network intrusion detection systems (NIDS) focusing on deep learning (DL) and machine learning (ML) approaches in network security. Deep learning algorithms are explained in their structure, and data intrusion network is justified based on an infrastructure of networks and attack types. By conducting a meta-analysis and debating the validation of the DL and ML approach by effectiveness, used dataset, detected attacks, classification task, and time complexity, we offer a thorough benchmarking assessment of the current NIDS-based publications-based systematic approach. The proposed method is considered reviewing works for the anomaly-based network intrusion detection system (anomaly-NIDS) models. Furthermore, the effectiveness of proposed algorithms and selected datasets are discussed for the recent direction and improvements of ML and DL to the NIDS. The future trends for improving an anomaly-IDS for continuing detection in the evolution of cyberattacks are highlighted in several research studies.

cs.CR↗

arXiv2023

Flexible Beamforming in B5G for Improving Tethered UAV Coverage over Smart Environments

Unmanned Aerial Vehicles (UAVs) are being used for wireless communications in smart environments. However, the need for mobility, scalability of data transmission over wide areas, and the required coverage area make UAV beamforming essential for better coverage and user experience. To this end, we propose a flexible beamforming approach to improve tethered UAV coverage quality and maximize the number of users experiencing the minimum required rate in any target environment. Our solution demonstrates a significant achievement in flexible beamforming in smart environments, including urban, suburban, dense, and high-rise urban. Furthermore, the beamforming gain is mainly concentrated in the target to improve the coverage area based on various scenarios. Simulation results show that the proposed approach can achieve a significantly received flexible power beam that focuses the transmitted signal towards the receiver and improves received power by reducing signal power spread. In the case of no beamforming, signal power spreads out as distance increases, reducing the signal strength. Furthermore, our proposed solution is suitable for improving UAV coverage and reliability in smart and harsh environments.

eess.SP↗

arXiv2023

An Efficient Game Theory-Based Power Control Algorithm for D2D Communication in 5G Networks

Device-to-Device (D2D) communication is one of the enabling technologies for 5G networks that support proximity-based service (ProSe) for wireless network communications. This paper proposes a power control algorithm based on the Nash equilibrium and game theory to eliminate the interference between the cellular user device and D2D links. This leads to reliable connectivity with minimal power consumption in wireless communication. The power control in D2D is modeled as a non-cooperative game. Each device is allowed to independently select and transmit its power to maximize (or minimize) user utility. The aim is to guide user devices to converge with the Nash equilibrium by establishing connectivity with network resources. The proposed algorithm with pricing factors is used for power consumption and reduces overall interference of D2Ds communication. The proposed algorithm is evaluated in terms of the energy efficiency of the average power consumption, the number of D2D communication, and the number of iterations. Besides, the algorithm has a relatively fast convergence with the Nash Equilibrium rate. It guarantees that the user devices can achieve their required Quality of Service (QoS) by adjusting the residual cost coefficient and residual energy factor. Simulation results show that the power control shows a significant reduction in power consumption that has been achieved by approximately 20% compared with algorithms in [11].

eess.SY↗

arXiv2023

A review of Smart Contract Blockchain Based on Multi-Criteria Analysis: Challenges and Motivations

A smart contract is a digital program of transaction protocol (rules of contract) based on the consensus architecture of blockchain. Smart contracts with Blockchain are modern technologies that have gained enormous attention in scientific and practical applications. A smart contract is the central aspect of a blockchain that facilitates blockchain as a platform outside the cryptocurrency spectrum. The development of blockchain technology, with a focus on smart contracts, has advanced significantly in recent years. However research on the smart contract idea has weaknesses in the implementation sectors based on a decentralized network that shares an identical state. This paper extensively reviews smart contracts based on multi criteria analysis challenges and motivations. Therefore, implementing blockchain in multi-criteria research is required to increase the efficiency of interaction between users via supporting information exchange with high trust. Implementing blockchain in the multi-criteria analysis is necessary to increase the efficiency of interaction between users via supporting information exchange and with high confidence, detecting malfunctioning, helping users with performance issues, reaching a consensus, deploying distributed solutions and allocating plans, tasks and joint missions. The smart contract with decision-making performance, planning and execution improves the implementation based on efficiency, sustainability and management. Furthermore the uncertainty and supply chain performance lead to improved users confidence in offering new solutions in exchange for problems in smart contacts. Evaluation includes code analysis and performance while development performance can be under development.

cs.DC↗

arXiv2022

D2D Multi-hop Energy Efficiency Toward EMS in B5G

Beyond fifth generation (B5G), communication has attracted much attention from academia, industry, and mobile network operators due to network densification, ultra-low latency communication, and enhanced energy and spectrum efficiency. However, a post-disaster emergency management system (EMS), which increasingly relies heavily on wireless communication infrastructure, is falling far behind in innovation and funding. Because the B5G concept represents a telecommunications industry revolution, EMS provisioning is intended to be dispersed, autonomous, and robust to network weaknesses caused by human and natural calamities. When the network is congested, partially functioning, or entirely isolated, we provide multi-device-to-device (D2D) communication to extend the communication coverage area with improved energy efficiency. Furthermore, we examine D2D multi-hop energy efficiency performance in the proposed network. The results demonstrate that the improved D2D multi-hop energy efficiency can improve the EMS effectively and efficiently in extending the coverage area and enhancing energy efficiency. Moreover, the proposed approach has been proven to increase energy efficiency, which acts as a suitable network design to recover from natural disasters and potentially save many lives

eess.SP↗

arXiv2022

An Efficient 3D Indoor Positioning System Based on Visible Light Communication

In this communication revolution era, visible light communication (VLC) is the optimum efficacious answer to the increased request for high-speed data transmission with reduced cost, besides the illumination. This technology is considered the best promising candidate for indoor positioning due to its ability to attain higher positioning accuracy than other technologies, alongside its distinct advantages. However, the existing techniques that had been applied in an indoor positioning system (IPS) based on VLC focused on the aspect of accuracy but neglected the aspects of cost and complexity. This paper proposes a new technique for positioning, namely complementary and supplementary angles based on received signal strength (CSA-RSS). The positioning error performance of the system is examined based on the single light-emitting diode (LED) and different positions of the photodiode (PD). The results demonstrate the improved accuracy and prove the effectiveness of the newly proposed technique where the average error is 3.2 cm in 80% of the examined positions and the maximum average positioning error is 4.2 cm. Moreover, the proposed approach has been proven to increase system efficiency which acts as a suitable VLC design for indoor positioning performance, avoiding weak signals

eess.SP↗

arXiv2021

A Compact Size 5G Hairpin Bandpass Filter with Multilayer Coupled Line

The multilayer structure is a promising technique used to minimize the size of planar microstrip filters. In the flexible design and incorporation of other microwave components, multilayer band-pass filter results in better and enhanced dimensions. This paper introduces a microstrip fifth-generation (5G) low-frequency band of 2.52-2.65 GHz using a parallel-coupled line (PCL) Bandpass filter and multilayer (ML) hairpin bandpass filter. The targeted four-pole resonator has a center frequency of 2.58 GHz with a bandwidth of 130 MHz. The filters are designed with a 0.1 dB passband ripple with a Chebyshev response. The hairpin-line offers compact filter design structures. Theoretically, they can be obtained by bending half-wavelength resonator resonators with parallel couplings into a "U" shape. The proposed configuration of the parallel-coupled line resonator is used to design the ML band-pass filter. The FR4 substrate with a dielectric constant (εr) of 4.3 and 1.6 mm thickness was used. A comparative analysis between the simulated insertion loss and the reflection coefficient of substrates RO3003 and FR4 was performed to validate the efficiency of the proposed filter design. Simulation of PCL filter is accomplished using computer simulation technology (CST) and an advanced design system (ADS) software. The PCL Bandpass filter was experimentally validated and a total tally between simulation results and measured results were achieved demonstrating a well-measured reflection coefficient. The simulated results obtained by the hairpin ML bandpass filter show that the circuit performs well in terms of Scattering(S) parameters and the filter size is significantly reduced.

eess.SP↗

arXiv2021

Energy-Efficient Tethered UAV Deployment in B5G for Smart Environments and Disaster Recovery

Due to Unmanned aerial vehicles (UAVs) limitations in processing power and battery lifetime. The tethered UAV (TUAV) offers an attractive approach to answer these shortcomings. Since a tethered connected to UAV is one potential energy solution to provide a stable power supply that connects to the ground would achieve impressive performances in smart environments and disaster recovery. The proposed solution is intended to provide stable energy and increase the coverage area of TUAV for smart environments and disaster recovery. This paper proposed that the tethered connected to UAV will provide the continuous supply and exchange the data with ground terminals. Besides the adjustable tether length, elevation angels act to increase the hovering region, leading to the scalability of coverage in many applications. Moreover, the power consumption and transmission the distance while achieving a trade-off between the hovering and coverage probabilities. The simulation results demonstrate efficient performance in terms of line-of-sight probability, path loss, and coverage probability for scalability coverage smart environments and disaster recovery scenarios. Furthermore, maximum coverage probability is achieved versus increased tethered length because of the gain and fly over a region of maximum tethered.

eess.SP↗

arXiv2021

An Optimization of Fractal Microstrip Patch Antenna with Partial Ground using Genetic Algorithm Method

Ultra-wideband is increasingly advancing as a high data rate wireless technology after the Federal Communication Commission announced the bandwidth of 7.5 GHz (from 3.1 GHz to 10.6 GHz) for ultra-wideband applications. Furthermore, designing a UWB antenna faces more difficulties than designing a narrow band antenna. A suitable UWB antenna should be able to work over the Federal Communication Commission of ultra-wide bandwidth allocation. Furthermore, good radiation properties across the entire frequency spectrum are needed. This paper outlines an optimization of fractal square microstrip patch antenna with the partial ground using a genetic algorithm at 3.5 GHz and 6 GHz. The optimized antenna design shows improved results compared to the non-optimized design. This design is optimized using a genetic algorithm and simulated using CST simulation software. The size of the optimized design is reduced by cutting the edges and the center of the patch. The optimized results reported, and concentrated on the rerun loss, VSWR and gain. The results indicate a significant enhancement as is illustrated in Table II. Thus, the optimized design is suitable for S-band and C-band applications.

cs.NI↗

arXiv2021

Pilot Contamination Elimination for Channel Estimation with Complete Knowledge of Large-Scale Fading in Downlink Massive MIMO Systems

Massive multiple-input multiple-output is a very important technology for future fifth-generation systems. However, massive massive multiple input multiple output systems are still limited because of pilot contamination, impacting the data rate due to the non-orthogonality of pilot sequences transmitted by users in the same cell to the neighboring cells. We propose a channel estimation with complete knowledge of large-scale fading by using an orthogonal pilot reuse sequence to eliminate PC in edge users with poor channel quality based on the estimation of large-scale fading and performance analysis of maximum ratio transmission and zero forcing precoding methods. We derived the lower bounds on the achievable downlink DR and signal-to-interference noise ratio based on assigning PRS to a user grouping that mitigated this problem when the number of antenna elements approaches infinity The simulation results showed that a high DR can be achieved due to better channel estimation and reduced performance loss

cs.IT↗

arXiv2021

Trade-off Energy and Spectral Efficiency in 5G Massive MIMO System

A massive multiple input multiple-output system is very important to optimize the trade-off energy efficiency and spectral efficiency in fifth-generation cellular networks. The challenges for the next generation depend on increasing the high data traffic in the wireless communication system for both EE and SE. In this paper, the trade off energy efficiency and spectral efficiency based on the first derivative of transmit antennas and transmit power in a downlink massive MIMO system has been investigated. The trade off EE-SE by using a multiobjective optimization problem to decrease transmit power has been analyzed. The EE and SE based on constraint maximum transmit power allocation and a number of antennas by computing the first derivative of transmit power to maximize the trade-off energy efficiency and spectral efficiency has been improved. From the simulation results, the optimum trade-off between EE and SE can be obtained based on the first derivative by selecting the optimal antennas with a low cost of transmit power. Therefore, based on an optimal optimization problem is flexible to make trade-offs between EE-SE for distinct preferences

cs.IT↗

arXiv2021

Internet of Fly Things For Post-Disaster Recovery Based on Multi-environment

Natural disasters such as floods and earthquakes immensely impact the telecommunication network infrastructure, leading to the malfunctioning and interruption of wireless services. Consequently, the user devices under the disaster zone are unable to access the cellular base stations. Wireless coverage on an unmanned aerial vehicle (UAV) is considered for providing coverage service to ground user devices in disaster events. This work evaluated the efficient performance of wireless coverage services of UAVs to provide the internet to fly things to help recover the communications link in a natural disaster in multi environments. The results demonstrate the line of sight, nonline of sight, path loss, and coverage probability for the radio propagation environment scenario. Therefore, the path loss and coverage probability are affected by the user devices' elevation angle and distance in the multi-environment system. The user position's optimum user device distance and elevation angle are also investigated to improve the coverage probability, which could be especially useful for the UAV deployment design.

eess.SP↗

arXiv2021

Real-time Autonomous Robot for Object Tracking using Vision System

Researchers and robotic development groups have recently started paying special attention to autonomous mobile robot navigation in indoor environments using vision sensors. The required data is provided for robot navigation and object detection using a camera as a sensor. The aim of the project is to construct a mobile robot that has integrated vision system capability used by a webcam to locate, track and follow a moving object. To achieve this task, multiple image processing algorithms are implemented and processed in real-time. A mini-laptop was used for collecting the necessary data to be sent to a PIC microcontroller that turns the processes of data obtained to provide the robot's proper orientation. A vision system can be utilized in object recognition for robot control applications. The results demonstrate that the proposed mobile robot can be successfully operated through a webcam that detects the object and distinguishes a tennis ball based on its color and shape.

cs.DC↗

arXiv2021

Unmanned Aerial Vehicle and Optimal Relay for Extending Coverage in Post-Disaster Scenarios

The malfunction or interruption of wireless coverage services has been shown to increase the mortality rate during natural disasters. Wireless coverage by an unmanned aerial vehicle (UAV) provides network coverage to ground user devices during and post-disaster events. The relay hops receive wireless coverage and can be forwarded to user devices that are out of coverage allowing reliable connectivity for large-scale user devices. This work evaluates the optimal relay hops performance to improve wireless coverage services and establish connectivity in post-disaster scenarios. The results demonstrate the UAV line of sights understanding to select an optimal relay for improving wireless coverage services. The path loss probability and system capacity were all affected by the user device distance and relay densities. The optimal relay hop distance and the UAV positions static are also investigated to improve coverage likelihood which could be especially useful for UAV deployment design. It is found that the dense relays node in UAV systems enhances the capacity coverage area and energy efficiency by decentralized connectivity through a multihop device to device wireless network.

eess.IV↗

arXiv2021

Distributed Clustering for User Devices Under Unmanned Aerial Vehicle Coverage Area during Disaster Recovery

An Unmanned Aerial Vehicle (UAV) is a promising technology for providing wireless coverage to ground user devices. For all the infrastructure communication networks destroyed in disasters, UAVs battery life is challenging during service delivery in a post-disaster scenario. Therefore, selecting cluster heads among user devices plays a vital role in detecting UAV signals and processing data for improving UAV energy efficacy and reliable Connectivity. This paper focuses on the performance evaluation of the clustering approach performance in detecting wireless coverage services with improving energy efficiency. The evaluation performance is a realistic simulation for the ground to air channel Line of Sight (LoS). The results show that the cluster head can effectively link the UAVs and cluster members at minimal energy expenditure. The UAVs altitudes and path loss exponent affected user devices for detecting wireless coverage. Moreover, the bit error rate in the cluster heads is considered for reliable Connectivity in post disaster. Clustering stabilizes the clusters linking the uncovered nodes to the UAV, and its effectiveness in doing so resulted in its ubiquity in emergency communication systems.

eess.SP↗