arXiv subjects

Abdulgani Annaberdiyev

Publications and source records attributed to Abdulgani Annaberdiyev.

At least 19 recordsLinked to original sources

arXiv2026

Many-body benchmarking of DFT local-registry energetics in bilayer InSe

Density functional theory (DFT) is widely used to model twisted bilayers, but the accuracy of the local stacking energetics underlying such models remains uncertain. Here, we benchmark the local-registry landscape of bilayer InSe using diffusion quantum Monte Carlo (DMC). DFT predicts that AB, AAr, and ABr stackings, which share the same interfacial Se registry, are nearly degenerate within 1.5 meV/f.u. and exhibit nearly indistinguishable DFT charge-density responses. DMC instead separates these stackings by 8(5) and 41(4) meV/f.u., while the energy difference between the most stable and least stable registries reaches 60(7) meV/f.u.. These large energy separations show that the stacking energetics are not determined by the interfacial atomic motif alone but depend on the full registry and its associated many-body electronic response. More broadly, these results show that DFT-based moiré models can substantially underestimate local stacking-energy corrugation, with direct consequences for predicted structural relaxation, domain formation, and electronic reconstruction in twisted layered materials.

cond-mat.mtrl-sci↗

arXiv2025

A many-body characterization of the fundamental gap in monolayer CrI$_3$

The many-body fixed-node and fixed-phase spin-orbit Diffusion Monte Carlo (DMC) methods are applied to accurately predict the fundamental gap of monolayer CrI$_3$ - the first experimentally-realized 2D material with intrinsic magnetism. The fundamental gap obtained, 2.9(1)~eV, agrees well with the highest peak in optical spectroscopy measurements and a previous $GW$ result. We numerically show that as expected in DMC the same value of the fundamental gap is obtained in the thermodynamic limit using both neutral promotions and the standard quasiparticle definition of the gap based on the ionization potential and electron affinity. Additional analysis of the differences between density matrices formed in different bases using configuration interaction calculations explains why a single-reference trial wave function can produce an accurate excitation. We find that accounting for electron correlation is more crucial than accounting for spin-orbit effects in determining the fundamental gap. These results highlight how DMC can be used to benchmark 2D material physics and emphasize the importance of using beyond-DFT methods for studying 2D materials.

cond-mat.mtrl-sci↗

arXiv2024

Enhanced Twist-Averaging Technique for Magnetic Metals: Applications using Quantum Monte Carlo

We propose an improved twist-averaging scheme for quantum Monte Carlo methods that use converged Kohn-Sham or Hartree-Fock orbitals as the reference. This twist-averaging technique is tailored to sample the Brillouin zone of magnetic metals, although it naturally extends to nonmagnetic conducting systems. The proposed scheme aims to reproduce the reference magnetization and achieves charge neutrality by construction, thus avoiding the large energy fluctuations and the postprocessing needed to correct the energies. It shows the most robust convergence of total energy and magnetism to the thermodynamic limit when compared to four other twist-averaging schemes. Diffusion Monte Carlo applications are shown on nonmagnetic Al and ferromagnetic $α$-Fe. The cohesive energy of Al in the thermodynamic limit shows an excellent agreement with the experimental result. Furthermore, the magnetic moments in $α$-Fe exhibit rapid convergence with an increasing number of twists.

physics.comp-ph↗

arXiv2023

The role of electron correlations in the electronic structure of putative Chern magnet TbMn$_6$Sn$_6$

A member of the RMn$_6$Sn$_6$ rare-earth family materials, TbMn$_6$Sn$_6$, recently showed experimental signatures of the realization of a quantum-limit Chern magnet. In this work, we use quantum Monte Carlo (QMC) and density functional theory with Hubbard $U$ (DFT$+U$) calculations to examine the electronic structure of TbMn$_6$Sn$_6$. To do so, we optimize accurate, correlation-consistent pseudopotentials for Tb and Sn using coupled-cluster and configuration-interaction (CI) methods. We find that DFT$+U$ and single-reference QMC calculations suffer from the same overestimation of the magnetic moments as meta-GGA and hybrid density functional approximations. Our findings point to the need for improved orbitals/wavefunctions for this class of materials, such as natural orbitals from CI, or for the inclusion of multi-reference effects that capture the static correlations for an accurate prediction of magnetic properties. DFT$+U$ with Mn magnetic moments adjusted to experiment predict the Dirac crossing in bulk to be close to the Fermi level, within $\sim 120$ meV, in agreement with the experiments. Our non-stoichiometric slab calculations show that the Dirac crossing approaches even closer to the Fermi level, suggesting the possible realization of Chern magnetism in this limit.

cond-mat.str-el↗

arXiv2023

A new generation of effective core potentials: selected Lanthanides and heavy elements

We construct correlation-consistent effective core potentials (ccECPs) for a selected set of heavy atoms and f-elements that are of significant current interest in materials and chemical applications, including Y, Zr, Nb, Rh, Ta, Re, Pt, Gd, and Tb. As customary, ccECPs consist of spin-orbit averaged relativistic effective potential (AREP) and effective spin-orbit (SO) terms. For the AREP part, our constructions are carried out within a relativistic coupled-cluster framework while also taking into objective function one-particle characteristics for improved convergence in optimizations. The transferability is adjusted using binding curves of hydride and oxide molecules. We address the difficulties encountered with f-elements, such as the presence of large cores and multiple near-degeneracies of excited levels. For these elements, we construct ccECPs with core-valence partitioning that includes 4f-subshell in the valence space. The developed ccECPs achieve an excellent balance between accuracy, size of the valence space, and transferability and are also suitable to be used in plane wave codes with reasonable energy cutoffs.

cond-mat.mtrl-sci↗

arXiv2023

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics.

cond-mat.mtrl-sci↗

arXiv2022

Electronic structure of $\boldsymbolα$-RuCl$_3$ by fixed-node and fixed-phase diffusion Monte Carlo methods

Layered material $α$-RuCl$_3$ has caught wide attention due to its possible realization of Kitaev's spin liquid and its electronic structure that involves the interplay of electron-electron correlations and spin-orbit effects. Several DFT$+U$ studies have suggested that both electron-electron correlations and spin-orbit effects are crucial for accurately describing the band gap. This work studies the importance of these two effects using fixed-node and fixed-phase diffusion Monte Carlo calculations both in spin-averaged and explicit spin-orbit formalisms. In the latter, the Slater-Jastrow trial function is constructed from two-component spin-orbitals using our recent quantum Monte Carlo (QMC) developments and thoroughly tested effective core potentials. Our results show that the gap in the ideal crystal is already accurately described by the spin-averaged case, with the dominant role being played by the magnetic ground state with significant exchange and electron correlation effects. We find qualitative agreement between hybrid DFT, DFT+$U$, and QMC. In addition, QMC results agree very well with available experiments, and we identify the values of exact Fock exchange mixing that provide comparable gaps. Explicit spin-orbit QMC calculations reveal that the effect of spin-orbit coupling on the gap is minor, of the order of 0.2 eV, which corresponds to the strength of the spin-orbit of the Ru atom.

cond-mat.str-el↗

arXiv2022

Assessing the accuracy of compound formation energies with quantum Monte Carlo

Accurately predicting the formation energy of a compound, which describes its thermodynamic stability, is a key challenge in materials physics. Here, we employ many-body quantum Monte Carlo (QMC) with single-reference trial functions to compute the formation energy of two electronically disparate compounds, the intermetallic VPt$_2$ and the semiconductor CuI, for which standard density functional theory (DFT) predictions using both the Perdew-Burke Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) density functional approximations deviate markedly from available experimental values. For VPt$_2$, we find an agreement between QMC, SCAN, and PBE0 estimates, which therefore remain in disagreement with the much less exothermic experimental value. For CuI, the QMC result agrees with neither SCAN nor PBE pointing towards DFT exchange-correlation biases, likely related to the localized Cu $3d$ electrons. Compared to the behavior of some density functional approximations within DFT, spin-averaged QMC exhibits a smaller but still appreciable deviation when compared to experiment. The QMC result is slightly improved by incorporating spin-orbit corrections for CuI and solid I$_2$, so that experiment and theory are brought into imperfect but reasonable agreement within about 120~meV/atom.

cond-mat.mtrl-sci↗

arXiv2022

A new generation of effective core potentials from correlated and spin-orbit calculations: selected heavy elements

We introduce new correlation consistent effective core potentials (ccECPs) for the elements I, Te, Bi, Ag, Au, Pd, Ir, Mo, and W with $4d$, $5d$, $6s$ and $6p$ valence spaces. These ccECPs are given as a sum of spin-orbit averaged relativistic effective potential (AREP) and effective spin-orbit (SO) terms. The construction involves several steps with increasing refinements from more simple to fully correlated methods. The optimizations are carried out with objective functions that include weighted many-body atomic spectra, norm-conservation criteria, and spin-orbit splittings. Transferability tests involve molecular binding curves of corresponding hydride and oxide dimers. The constructed ccECPs are systematically better and in a few cases on par with previous effective core potential (ECP) tables on all tested criteria and provide a significant increase in accuracy for valence-only calculations with these elements. Our study confirms the importance of the AREP part in determining the overall quality of the ECP even in the presence of sizable spin-orbit effects. The subsequent quantum Monte Carlo (QMC) calculations point out the importance of accurate trial wave functions which in some cases (mid series transition elements) require treatment well beyond single-reference.

cond-mat.mtrl-sci↗

arXiv2021

A quantum Monte Carlo study of systems with effective core potentials and node nonlinearities

We study beryllium dihydride (BeH$_2$) and acetylene (C$_2$H$_2$) molecules using real-space diffusion Monte Carlo (DMC) method. The molecules serve as perhaps the simplest prototypes that illustrate the difficulties with biases in the fixed-node DMC calculations that might appear with the use of effective core potentials (ECPs) or other nonlocal operators. This is especially relevant for the recently introduced correlation consistent ECPs (ccECPs) for $2s2p$ elements. Corresponding ccECPs exhibit deeper potential functions due to higher fidelity to all-electron counterparts, which could lead to larger local energy fluctuations. We point out that the difficulties stem from issues that are straightforward to address by upgrades of basis sets, use of T-moves for nonlocal terms, inclusion of a few configurations into the trial function and similar. The resulting accuracy corresponds to the ccECP target (chemical accuracy) and it is in consistent agreement with independent correlated calculations. Further possibilities for upgrading the reliability of the DMC algorithm and considerations for better adapted and more robust Jastrow factors are discussed as well.

physics.comp-ph↗

arXiv2021

Weighted nodal domain averages of eigenstates for quantum Monte Carlo and beyond

We study the nodal properties of many-body eigenstates of stationary Schrödinger equation that affect the accuracy of real-space quantum Monte Carlo calculations. In particular, we introduce weighted nodal domain averages that provide a new probe of nodal surfaces beyond the usual expectations. Particular choices for the weight function reveal, for example, that the difference between two arbitrary fermionic eigenvalues is given by the nodal hypersurface integrals normalized by overlaps with the bosonic ground state of the given Hamiltonian. Noninteracting and fully interacting Be atom with corresponding almost exact and approximate wave functions are used to illustrate several aspects of these concepts. Variational formulations that employ different weights are proposed for prospective improvement of nodes in variational and fixed-node diffusion Monte Carlo calculations.

physics.comp-ph↗

arXiv2021

Cohesion and excitations of diamond-structure silicon by quantum Monte Carlo: Benchmarks and control of systematic biases

We have carried out quantum Monte Carlo (QMC) calculations of silicon crystal focusing on the accuracy and systematic biases that affect the electronic structure characteristics. The results show that 64 and 216 atom supercells provide an excellent consistency for extrapolated energies per atom in the thermodynamic limit for ground, excited, and ionized states. We have calculated the ground state cohesion energy with both $\textit{systematic and statistical errors}$ below $\approx$0.05 eV. The ground state exhibits a fixed-node error of only $1.3(2)\%$ of the correlation energy, suggesting an unusually high accuracy of the corresponding single-reference trial wave function. We obtain a very good agreement between optical and quasiparticle gaps that affirms the marginal impact of excitonic effects. Our most accurate results for band gaps differ from the experiments by about 0.2 eV. This difference is assigned to a combination of residual finite-size and fixed-node errors. We have estimated the crystal Fermi level referenced to vacuum that enabled us to calculate the edges of valence and conduction bands in agreement with experiments.

cond-mat.mtrl-sci↗

arXiv2020

Binding and excitations in Si$_x$H$_y$ molecular systems using quantum Monte Carlo

We present high-accuracy correlated calculations of small Si$_x$H$_y$ molecular systems both in the ground and excited states. We employ quantum Monte Carlo (QMC) together with a variety of many-body wave function approaches based on basis set expansions. The calculations are carried out in a valence-only framework using recently derived correlation consistent effective core potentials. Our primary goal is to understand the fixed-node diffusion QMC errors in both the ground and excited states with single-reference trial wave functions. Using a combination of methods, we demonstrate the very high accuracy of the QMC atomization energies being within $\approx$ 0.07 eV or better when compared with essentially exact results. By employing proper choices for trial wave functions, we have found that the fixed-node QMC biases for total energies are remarkably uniform ranging between $1-3.5$ % with absolute values at most $\approx$ 0.2 eV across the systems and several types of excitations such as singlets and triplets as well as low-lying and Rydberg-like states. Our results further corroborate that Si systems, and presumably also related main group IV and V elements of the periodic table (Ge, Sn, etc), exhibit some of the lowest fixed-node biases found in valence-only electronic structure QMC calculations.

physics.chem-ph↗

arXiv2020

QMCPACK: Advances in the development, efficiency, and application of auxiliary field and real-space variational and diffusion Quantum Monte Carlo

We review recent advances in the capabilities of the open source ab initio Quantum Monte Carlo (QMC) package QMCPACK and the workflow tool Nexus used for greater efficiency and reproducibility. The auxiliary field QMC (AFQMC) implementation has been greatly expanded to include k-point symmetries, tensor-hypercontraction, and accelerated graphical processing unit (GPU) support. These scaling and memory reductions greatly increase the number of orbitals that can practically be included in AFQMC calculations, increasing accuracy. Advances in real space methods include techniques for accurate computation of band gaps and for systematically improving the nodal surface of ground state wavefunctions. Results of these calculations can be used to validate application of more approximate electronic structure methods including GW and density functional based techniques. To provide an improved foundation for these calculations we utilize a new set of correlation-consistent effective core potentials (pseudopotentials) that are more accurate than previous sets; these can also be applied in quantum-chemical and other many-body applications, not only QMC. These advances increase the efficiency, accuracy, and range of properties that can be studied in both molecules and materials with QMC and QMCPACK.

physics.comp-ph↗

arXiv2020

Accurate atomic correlation and total energies for correlation consistent effective core potentials

Very recently, we introduced a set of correlation consistent effective core potentials (ccECPs) constructed within full many-body approaches. By employing significantly more accurate correlated approaches we were able to reach a new level of accuracy for the resulting effective core Hamiltonians. We also strived for simplicity of use and easy transferability into a variety of electronic structure methods in quantum chemistry and condensed matter physics. Here, as a reference for future use, we present exact or nearly-exact total energy calculations for these ccECPs. The calculations cover H-Kr elements and are based on the state-of-the-art configuration interaction (CI), coupled-cluster (CC), and quantum Monte Carlo (QMC) calculations with systematically eliminated/improved errors. In particular, we carry out full CI/CCSD(T)/CCSDT(Q) calculations with cc-pVnZ with up to n=6 basis sets and we estimate the complete basis set limits. Using combinations of these approaches, we achieved an accuracy of $\approx$ 1-10 mHa for K-Zn atoms and $\approx$ 0.1-0.3 mHa for all other elements $-$ within about 1% or better of the ccECP total correlation energies. We also estimate the corresponding kinetic energies within the feasible limit of full CI calculations. In order to provide data for QMC calculations, we include fixed-node diffusion Monte Carlo energies for each element that give quantitative insights into the fixed-node biases for single-reference trial wave functions. The results offer a clear benchmark for future high accuracy calculations in a broad variety of correlated wave function methods such as CI and CC as well is in stochastic approaches such as real space sampling QMC.

cond-mat.mtrl-sci↗

arXiv2019

A new generation of effective core potentials from correlated calculations: 4s and 4p main group elements and first row additions

Recently, we developed a new method for generating effective core potentials (ECPs) using valence energy isospectrality with explicitly correlated all-electron (AE) excitations and norm-conservation criteria. We apply this methodology to the 3$^{rd}$-row main group elements, creating new correlation consistent effective core potentials (ccECPs) and also derive additional ECPs to complete the ccECP table for H-Kr. For K and Ca, we develop Ne-core ECPs and for the $4p$ main group elements, we construct [Ar]$3d^{10}$-core potentials. Scalar relativistic effects are included in their construction. Our ccECPs reproduce AE spectra with significantly better accuracy than many existing pseudopotentials and show better overall consistency across multiple properties. The transferability of ccECPs is tested on monohydride and monoxide molecules over a range of molecular geometries. For the constructed ccECPs we also provide optimized DZ - 6Z valence Gaussian basis sets.

cond-mat.mtrl-sci↗

arXiv2018

New generation of effective core potentials from correlated calculations: 2nd row elements

Very recently, we have introduced correlation consistent effective core potentials (ccECPs) derived from many-body approaches with the main target being its use in explicitly correlated methods but also in mainstream approaches. The ccECPs are based on reproducing excitation energies for a subset of valence states, i.e., achieving a near-isospectrality between the original and pseudo Hamiltonians. In addition, binding curves of dimer molecules have been used for refinement and overall improvement of transferability over a range of bond lengths. Here we apply similar ideas to the second row elements and study several aspects of the constructions in order to find the optimal (or nearly-optimal) solutions within the chosen ECP forms with $3s,3p$ valence space (Ne-core). New constructions exhibit accurate low-lying atomic excitations and equilibrium molecular bonds (on average within $\approx$ $0.03$ eV and $3$ mÅ), however, the errors for Al and Si oxide molecules at short bond lengths are notably larger for both ours and existing ECPs. Assuming this limitation, our ccECPs show a systematic balance between the criteria of atomic spectra accuracy and transferability for molecular bonds. In order to provide another option with much higher uniform accuracy, we also construct He-core ECPs for the whole row with typical discrepancies of $\approx$ 0.01 eV or smaller.

cond-mat.mtrl-sci↗

arXiv2018

New generation of effective core potentials from correlated calculations: 3d transition metal series

Recently, we have introduced a new generation of effective core potentials (ECPs) designed for accurate correlated calculations but equally useful for a broad variety of approaches. The guiding principle has been the isospectrality of all-electron and ECP Hamiltonians for a subset of valence many-body states using correlated, nearly-exact calculations. Here we present such ECPs for the 3d transition series Sc to Zn with Ne-core, i.e, with semi-core 3s and 3p electrons in the valence space. Besides genuine many-body accuracy, the operators are simple, being represented by a few gaussians per symmetry channel with resulting potentials that are bounded everywhere. The transferability is checked on selected molecular systems over a range of geometries. The ECPs show a high overall accuracy with valence spectral discrepancies typically $\approx$ 0.01-0.02 eV or better. They also reproduce binding curves of hydride and oxide molecules typically within 0.02-0.03 eV deviations over the full non-dissociation range of interatomic distances.

cond-mat.mtrl-sci↗