arXiv subjects

Abijith Kowligy

Publications and source records attributed to Abijith Kowligy.

15 recordsLinked to original sources

arXiv2020

Fully phase-stabilized 1 GHz turnkey frequency comb at 1.56 $μ$m

Low noise and high repetition rate optical frequency combs are desirable for many applications from timekeeping to precision spectroscopy. For example, gigahertz repetition rate sources greatly increase the acquisition speed of spectra in a dual-comb modality when compared to lower repetition rate sources, while still maintaining sufficient instantaneous resolution to resolve ro-vibrational signatures from molecules in a variety of conditions. In this paper, we present the stabilization and characterization of a turnkey commercial 1~GHz mode-locked laser that operates at telecom wavelengths (1.56 $μ$m). Fiber amplification and spectral broadening result in the high signal-to-noise ratio detection and stabilization of $\textit{f}_{\textit{ceo}}$ with 438 mrad of residual phase noise (integrated from 10$^2$ to 10$^7$ Hz). Simultaneously, we stabilize the beatnote between the nearest comb mode and a cavity stabilized continuous-wave laser at 1.55 $μ$m with 41 mrad of residual phase noise (integrated from 10$^2$ to 10$^7$ Hz). This robust, self-referenced comb system is built with off-the-shelf polarization-maintaining fiber components and will be useful for a wide range of low noise frequency comb applications that benefit from the increased repetition rate.

physics.optics↗

arXiv2020

A six-octave optical frequency comb from a scalable few-cycle erbium fiber laser

A compact and robust coherent laser light source that provides spectral coverage from the ultraviolet to infrared is desirable for numerous applications, including heterodyne super resolution imaging[1], broadband infrared microscopy[2], protein structure determination[3], and standoff atmospheric trace-gas detection[4]. Addressing these demanding measurement problems, laser frequency combs[5] combine user-defined spectral resolution with sub-femtosecond timing and waveform control to enable new modalities of high-resolution, high-speed, and broadband spectroscopy[6-9]. In this Letter we introduce a scalable source of near-single-cycle, 0.56 MW pulses generated from robust and low-noise erbium fiber (Er:fiber) technology, and we use it to generate a frequency comb that spans six octaves from the ultraviolet (350 nm) to mid-infrared (22500 nm). The high peak power allows us to exploit the second-order nonlinearities in infrared-transparent, nonlinear crystals (LiNbO$_3$, GaSe, and CSP) to provide a robust source of phase-stable infrared ultra-short pulses with simultaneous spectral brightness exceeding that of an infrared synchrotron[10]. Additional cascaded second-order nonlinearities in LiNbO$_3$ lead to comb generation with four octaves of simultaneous coverage (0.350 to 5.6 $μ$m). With a comb-tooth linewidth of 10 kHz at 193 THz, we realize a notable spectral resolving power exceeding 10$^{10}$ across 0.86 PHz of bandwidth. We anticipate that this compact and accessible technology will open new opportunities for multi-band precision spectroscopy, coherent microscopy, ultra-high sensitivity nanoscopy, astronomical spectroscopy, and precision carrier-envelope phase (CEP) stable strong field phenomena.

physics.optics↗

arXiv2020

Mid-infrared frequency combs at 10 GHz

We demonstrate mid-infrared (MIR) frequency combs at 10 GHz repetition rate via intra-pulse difference-frequency generation (DFG) in quasi-phase-matched nonlinear media. Few-cycle pump pulses ($\mathbf{\lesssim}$15 fs, 100 pJ) from a near-infrared (NIR) electro-optic frequency comb are provided via nonlinear soliton-like compression in photonic-chip silicon-nitride waveguides. Subsequent intra-pulse DFG in periodically-poled lithium niobate waveguides yields MIR frequency combs in the 3.1--4.1 $μ$m region, while orientation-patterned gallium phosphide provides coverage across 7--11 $μ$m. Cascaded second-order nonlinearities simultaneously provide access to the carrier-envelope-offset frequency of the pump source via in-line f-2f nonlinear interferometry. The high-repetition rate MIR frequency combs introduced here can be used for condensed phase spectroscopy and applications such as laser heterodyne radiometry.

physics.optics↗

arXiv2019

Nonlinear silicon waveguides generating broadband, spectrally engineered frequency combs spanning 2.0-8.5 um

Nanophotonic waveguides with sub-wavelength mode confinement and engineered dispersion profiles are an excellent platform for application-tailored nonlinear optical interactions at low pulse energies. Here, we present fully air clad suspended-silicon waveguides for infrared frequency comb generation with optical bandwidth limited only by the silicon transparency. The achieved spectra are lithographically tailored to span 2.1 octaves in the mid-infrared (2.0-8.5 um or 1170--5000 cm-1) when pumped at 3.10 um with 100 pJ pulses. Novel fork-shaped couplers provide efficient input coupling with only 1.5 dB loss. The coherence, brightness, and the stability of the generated light are highlighted in a dual frequency comb setup in which individual comb-lines are resolved with 30 dB extinction ratio and 100 MHz spacing in the wavelength range of 4.8-8.5 um (2100-1170 cm-1). These sources are used for broadband gas- and liquid-phase dual-comb spectroscopy with 100 MHz comb-line resolution. We achieve a peak spectral signal-to-noise ratio of 10 Hz^0.5 across a simultaneous bandwidth containing 112,200 comb-lines. These results provide a pathway to further integration with the developing high repetition rate frequency comb lasers for compact sensors with applications in chip-based chemical analysis and spectroscopy.

physics.optics↗

arXiv2019

Multi-functional integrated photonics in the mid-infrared with suspended AlGaAs on silicon

The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal confinement, and physical robustness. In this work, we demonstrate a new platform, suspended AlGaAs waveguides integrated on silicon, providing excellent performance in all of these metrics. We demonstrate low propagation losses within a span of nearly two octaves (1.26 to 4.6 $μ$m) with exemplary performance of 0.45 dB/cm at $λ= 2.4$ $μ$m. We exploit the high nonlinearity of this platform to demonstrate 1560 nm-pumped second-harmonic generation and octave-spanning supercontinuum reaching out to 2.3 $μ$m with 3.4 pJ pump pulse energy. With mid-IR pumping, we generate supercontinuum spanning from 2.3 to 6.5 $μ$m. Finally, we demonstrate the versatility of the platform with mid-infrared passive devices such as low-loss 10 $μ$m-radius bends, compact power splitters with 96 $\pm$ 1% efficiency and edge couplers with 3.0 $\pm$ 0.1 dB loss. This platform has strong potential for multi-functional integrated photonic systems in the mid-IR.

physics.app-ph↗

arXiv2018

$χ^{(2)}$ mid-infrared frequency comb generation and stabilization with few-cycle pulses

Mid-infrared laser frequency combs are compelling sources for precise and sensitive metrology with applications in molecular spectroscopy and spectro-imaging. The infrared atmospheric window between 3-5.5 $μ$m in particular provides vital information regarding molecular composition. Using a robust, fiber-optic source of few-cycle pulses in the near-infrared, we experimentally demonstrate ultra-broad bandwidth nonlinear phenomena including harmonic and difference frequency generation in a single pass through periodically poled lithium niobate (PPLN). These $χ^{(2)}$ nonlinear optical processes result in the generation of frequency combs across the mid-infrared atmospheric window which we employ for dual-comb spectroscopy of acetone and carbonyl sulfide with resolution as high as 0.003 cm$^{-1}$. Moreover, cascaded $χ^{(2)}$ nonlinearities in the same PPLN directly provide the carrier-envelope offset frequency of the near-infrared driving pulse train in a compact geometry.

physics.optics↗

arXiv2018

Tunable mid-infrared generation via wide-band four wave mixing in silicon nitride waveguides

We experimentally demonstrate wide-band (>100 THz) frequency down-conversion of near-infrared (NIR) femtosecond-scale pulses from an Er:fiber laser to the mid-infrared (MIR) using four-wave-mixing (FWM) in photonic-chip silicon-nitride waveguides. The engineered dispersion in the nanophotonic geometry, along with the wide transparency range of silicon nitride, enables large-detuning FWM phase-matching and results in tunable MIR from 2.6-3.6 um on a single chip with 100-pJ-scale pump-pulse energies. Additionally, we observe > 20 dB broadband parametric gain for the NIR pulses when the FWM process is operated in a frequency up-conversion configuration. Our results demonstrate how integrated photonic circuits could realize multiple nonlinear optical phenomena on the same chip and lead to engineered synthesis of broadband, tunable, and coherent light across the NIR and MIR wavelength bands from fiber-based pumps.

physics.app-ph↗

arXiv2018

Self-organized nonlinear gratings for ultrafast nanophotonics

Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond pulses propagating through nanophotonic waveguides, providing simultaneous group-velocity matching and quasi-phase-matching for second harmonic generation. We record the first direct microscopy images of photo-induced nonlinear gratings, and demonstrate how these waveguides enable simultaneous $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes, which we utilize to stabilize a laser frequency comb. Finally, we derive the equations that govern self-organized grating formation for femtosecond pulses and explain the crucial role of group-velocity matching. In the future, such nanophotonic waveguides could enable scalable, reconfigurable nonlinear optical systems.

physics.optics↗

arXiv2018

Heterogeneously integrated GaAs waveguides on insulator for efficient frequency conversion

Tremendous scientific progress has been achieved through the development of nonlinear integrated photonics. Prominent examples are Kerr-frequency-comb generation in micro-resonators, and supercontinuum generation and frequency conversion in nonlinear photonic waveguides. High conversion efficiency is enabling for applications of nonlinear optics, including such broad directions as high-speed optical signal processing, metrology, and quantum communication and computation. In this work, we demonstrate a gallium-arsenide-on-insulator (GaAs) platform for nonlinear photonics. GaAs has among the highest second- and third-order nonlinear optical coefficients, and use of a silica cladding results in waveguides with a large refractive index contrast and low propagation loss for expanded design of nonlinear processes. By harnessing these properties and developing nanofabrication with GaAs, we report a record normalized second-harmonic efficiency of 13,000% W-1cm-2 at a fundamental wavelength of 2 um. This work paves the way for high performance nonlinear photonic integrated circuits (PICs), which not only can transition advanced functionalities outside the lab through fundamentally reduced power consumption and footprint, but also enables future optical sources and detectors.

physics.optics↗

arXiv2017

Dual frequency comb spectroscopy in the molecular fingerprint region

Spectroscopy in the molecular fingerprint spectral region (6.5-20 $μ$m) yields critical information on material structure for physical, chemical and biological sciences. Despite decades of interest and effort, this portion of the electromagnetic spectrum remains challenging to cover with conventional laser technologies. In this report, we present a simple and robust method for generating super-octave, optical frequency combs in the fingerprint region through intra-pulse difference frequency generation in an orientation-patterned gallium phosphide crystal. We demonstrate the utility of this unique coherent light source for high-precision, dual-comb spectroscopy in methanol and ethanol vapor. These results highlight the potential of laser frequency combs for a wide range of molecular sensing applications, from basic molecular spectroscopy to nanoscopic imaging.

physics.optics↗

arXiv2017

Quasi-phase-matched supercontinuum-generation in photonic waveguides

Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally demonstrate quasi-phase-matched supercontinuum to the TE20 and TE00 waveguide modes, which enhances the intensity of the SCG in specific spectral regions by as much as 20 dB. We utilize higher-order quasi-phase-matching (up to the 16th order) to enhance the intensity in numerous locations across the spectrum. Quasi-phase-matching adds a unique dimension to the design-space for SCG waveguides, allowing the spectrum to be engineered for specific applications.

physics.optics↗

arXiv2017

High-harmonic generation in periodically poled waveguides

Optical waveguides made from periodically poled materials provide high confinement of light and enable the generation of new wavelengths via quasi-phase-matching, making them a key platform for nonlinear optics and photonics. However, such devices are not typically employed for high-harmonic generation. Here, using 200-fs, 10-nJ-level pulses of 4100 nm light at 1 MHz, we generate high harmonics up to the 13th harmonic (315 nm) in a chirped, periodically poled lithium niobate (PPLN) waveguide. Total conversion efficiencies into the visible--ultraviolet region are as high as 10 percent. We find that the output spectrum depends on the waveguide poling period, indicating that quasi-phase-matching plays a significant role. In the future, such periodically poled waveguides may enable compact sources of ultrashort pulses at high repetition rates and provide new methods of probing the electronic structure of solid-state materials.

physics.optics↗

arXiv2017

Versatile silicon-waveguide supercontinuum for coherent mid-infrared spectroscopy

Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric chemistry, trace and hazardous gas detection, and biological microscopy. Driven by such applications, the development of low-noise, coherent laser sources with broad, tunable coverage is a topic of great interest. Laser frequency combs possess a unique combination of precisely defined spectral lines and broad bandwidth that can enable the above-mentioned applications. Here, we leverage robust fabrication and geometrical dispersion engineering of silicon nanophotonic waveguides for coherent frequency comb generation spanning 70 THz in the mid-infrared (2.5 um to 6.2 um). Precise waveguide fabrication provides significant spectral broadening and engineered spectra targeted at specific mid-infrared bands. We use this coherent light source for dual-comb spectroscopy at 5 um.

physics.optics↗

arXiv2017

Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities

Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercontinuum generation, difference-frequency generation, second-harmonic generation, and third-harmonic generation. As one application of integrating multiple nonlinear processes, we measure and stabilize the carrier-envelope-offset frequency of a laser comb by direct photodetection of the output light. Additionally, we generate ~0.3 mW in the 3000 nm to 4000 nm region, which is potentially useful for molecular spectroscopy. The combination of broadband light generation from the visible through the mid-infrared, combined with simplified self-referencing, provides a path towards robust comb systems for spectroscopy and metrology in the field.

physics.optics↗

arXiv2013

Experimental demonstration of interaction-free all-optical switching via the quantum Zeno effect

We experimentally demonstrate all-optical interaction-free switching using the quantum Zeno effect, achieving a high contrast of 35:1. The experimental data matches a zero-parameter theoretical model for several different regimes of operation, indicating a good understanding of the switch's characteristics. We also discuss extensions of this work that will allow for significantly improved performance, and the integration of this technology onto chip-scale devices.

quant-ph↗