arXiv subjects

Abraham D. Stroock

Publications and source records attributed to Abraham D. Stroock.

9 recordsLinked to original sources

arXiv2024

Tunable transport in bi-disperse porous materials with vascular structure

We study transport in synthetic, bi-disperse porous structures, with arrays of microchannels interconnected by a nanoporous layer. These structures are inspired by the xylem tissue in vascular plants, in which sap water travels from the roots to the leaves to maintain hydration and carry micronutrients. We experimentally evaluate transport in three conditions: high pressure-driven flow, spontaneous imbibition, and transpiration-driven flow. The latter case resembles the situation in a living plant, where bulk liquid water is transported upwards in a metastable state (negative pressure), driven by evaporation in the leaves; here we report stable, transpiration-driven flows down to $\sim -15$ MPa of driving force. By varying the shape of the microchannels, we show that we can tune the rate of these transport processes in a predictable manner, using a simple analytical (effective medium) approach and numerical simulations of the flow field in the bi-disperse media. We also show that the spontaneous imbibition behavior of a single structure - with fixed geometry - can behave very differently depending on its preparation (filled with air, vs. evacuated), because of a dramatic change in the conductance of vapor in the microchannels; this change offers a second way to tune the rate of transport in bi-disperse, xylem-like structures, by switching between air-filled and evacuated states.

cond-mat.soft↗

arXiv2021

Non-isothermal effects on water potential measurement in a simple geometry

In this paper, we investigate quantitatively the coupling between gradients of temperature and of chemical or water potential under steady state conditions in the vapor phase. This coupling is important for the measurement and modeling of the dynamics of water in unsaturated environments like soils and plants. We focus on a simple non-equilibrium scenario in which a gradient of temperature exists across an air-filled gap that separates two aqueous phases with no net transfer of water. This scenario is relevant for measurements of the water potential in environmental and industrial contexts. We use a new tool, a microtensiometer, to perform these measurements. We observed variations of water potential with difference of temperature across the air gap of $-\SI{7.9(3)}{\mega\pascal\per\kelvin}$, in agreement with previous measurements. Our result is close to a first order theoretical prediction, highlighting that most of the effect comes from the variation of saturation pressure with temperature. We then show that thermodiffusion (Soret effect) coupled to natural convection could occur in our experiment and discuss how these effects could explain the small discrepancy observed between measurements and first order theoretical prediction.

physics.geo-ph↗

arXiv2018

Enhanced oxygen solubility in metastable water under tension

Despite its relevance in numerous natural and industrial processes, the solubility of molecular oxygen has never been directly measured in capillary condensed liquid water. In this article, we measure oxygen solubility in liquid water trapped within nanoporous samples, in metastable equilibrium with a subsaturated vapor. We show that solubility increases two-fold at moderate subsaturations (RH ~ 0.55). This evolution with relative humidity is in good agreement with a simple thermodynamic prediction using properties of bulk water, previously verified experimentally at positive pressure. Our measurement thus verifies the validity of this macroscopic thermodynamic theory to strong confinement and large negative pressures, where ignificant non-idealities are expected. This effect has strong implications for important oxygen-dependent chemistries in natural and technological contexts.

physics.chem-ph↗

arXiv2017

Passive phloem loading and long-distance transport in a synthetic tree-on-a-chip

Vascular plants rely on differences of osmotic pressure to export sugars from regions of synthesis (mature leaves) to sugar sinks (roots, fruits). In this process, known as Münch pressure flow, the loading of sugars from photosynthetic cells to the export conduit (the phloem) is crucial, as it sets the pressure head necessary to power long-distance transport. Whereas most herbaceous plants use active mechanisms to increase phloem concentration above that of the photosynthetic cells, in most tree species, for which transport distances are largest, loading seems to occur via passive symplastic diffusion from the mesophyll to the phloem. Here, we use a synthetic microfluidic model of a passive loader to explore the nonlinear dynamics that arise during export and determine the ability of passive loading to drive long-distance transport. We first demonstrate that in our device, phloem concentration is set by the balance between the resistances to diffusive loading from the source and convective export through the phloem. Convection-limited export corresponds to classical models of Münch transport, where phloem concentration is close to that of the source; in contrast, diffusion-limited export leads to small phloem concentrations and weak scaling of flow rates with the hydraulic resistance. We then show that the effective regime of convection-limited export is predominant in plants with large transport resistances and low xylem pressures. Moreover, hydrostatic pressures developed in our synthetic passive loader can reach botanically relevant values as high as 10 bars. We conclude that passive loading is sufficient to drive long-distance transport in large plants, and that trees are well suited to take full advantage of passive phloem loading strategies.

physics.bio-ph↗

arXiv2016

Phloem loading through plasmodesmata: a biophysical analysis

In many species, sucrose en route out of the leaf migrates from photosynthetically active mesophyll cells into the phloem down its concentration gradient via plasmodesmata, i.e., symplastically. In some of these plants the process is entirely passive, but in others phloem sucrose is actively converted into larger sugars, raffinose and stachyose, and segregated (trapped), thus raising total phloem sugar concentration to a level higher than in the mesophyll. Questions remain regarding the mechanisms and selective advantages conferred by both of these symplastic loading processes. Here we present an integrated model - including local and global transport and the kinetics of oligomerization - for passive and active symplastic loading. We also propose a physical model of transport through the plasmodesmata. With these models, we predict that: 1) relative to passive loading, oligomerization of sucrose in the phloem, even in the absence of segregation, lowers the sugar content in the leaf required to achieve a given export rate and accelerates export for a given concentration of sucrose in the mesophyll; and 2) segregation of oligomers and the inverted gradient of total sugar content can be achieved for physiologically reasonable parameter values, but even higher export rates can be accessed in scenarios in which polymers are allowed to diffuse back into the mesophyll. We discuss these predictions in relation to further studies aimed at the clarification of loading mechanisms, fitness of active and passive symplastic loading, and potential targets for engineering improved rates of export.

physics.bio-ph↗

arXiv2015

Capillarity-Driven Flows at the Continuum Limit

We experimentally investigate the dynamics of capillary-driven flows at the nanoscale, using an original platform that combines nanoscale pores and microfluidic features. Our results show a coherent picture across multiple experiments including imbibition, poroelastic transient flows, and a drying-based method that we introduce. In particular, we exploit extreme drying stresses - up to 100 MPa of tension - to drive nanoflows and provide quantitative tests of continuum theories of fluid mechanics and thermodynamics (e.g. Kelvin-Laplace equation) across an unprecedented range. We isolate the breakdown of continuum as a negative slip length of molecular dimension.

cond-mat.soft↗

arXiv2014

Drying by Cavitation and Poroelastic Relaxations in Porous Media with Macroscopic Pores Connected by Nanoscale Throats

We investigate the drying dynamics of porous media with two pore diameters separated by several orders of magnitude. Nanometer-sized pores at the edge of our samples prevent air entry, while drying proceeds by heterogeneous nucleation of vapor bubbles (cavitation) in the liquid in micrometer-sized voids within the sample. We show that the dynamics of cavitation and drying are set by the interplay of the deterministic poroelastic mass transport in the porous medium and the stochastic nucleation process. Spatio-temporal patterns emerge in this unusual reaction-diffusion system, with temporal oscillations in the drying rate and variable roughness of the drying front.

cond-mat.soft↗

arXiv2014

How a "pinch of salt" can tune chaotic mixing of colloidal suspensions

Efficient mixing of colloids, particles or molecules is a central issue in many processes. It results from the complex interplay between flow deformations and molecular diffusion, which is generally assumed to control the homogenization processes. In this work we demonstrate on the contrary that despite fixed flow and self-diffusion conditions, the chaotic mixing of colloidal suspensions can be either boosted or inhibited by the sole addition of trace amount of salt as a co-mixing species. Indeed, this shows that local saline gradients can trigger a chemically-driven transport phenomenon, diffusiophoresis, which controls the rate and direction of molecular transport far more efficiently than usual Brownian diffusion. A simple model combining the elementary ingredients of chaotic mixing with diffusiophoretic transport of the colloids allows to rationalize our observations and highlights how small-scale out-of-equilibrium transport bridges to mixing at much larger scales in a very effective way. Considering chaotic mixing as a prototypal building block for turbulent mixing, this suggests that these phenomena, occurring whenever the chemical environment is inhomogeneous, might bring interesting perspective from micro-systems up to large-scale situations, with examples ranging from ecosystems to industrial contexts.

physics.flu-dyn↗

arXiv2003

Three-dimensional flows in slowly-varying planar geometries

We consider laminar flow in channels constrained geometrically to remain between two parallel planes; this geometry is typical of microchannels obtained with a single step by current microfabrication techniques. For pressure-driven Stokes flow in this geometry and assuming that the channel dimensions change slowly in the streamwise direction, we show that the velocity component perpendicular to the constraint plane cannot be zero unless the channel has both constant curvature and constant cross-sectional width. This result implies that it is, in principle, possible to design "planar mixers", i.e. passive mixers for channels that are constrained to lie in a flat layer using only streamwise variations of their in-plane dimensions. Numerical results are presented for the case of a channel with sinusoidally varying width.

cond-mat.soft↗