arXiv subjects

Achintya Paradkar

Publications and source records attributed to Achintya Paradkar.

4 recordsLinked to original sources

arXiv2025

Efficient flip-chip and on-chip-based modulation of flux-tunable superconducting resonators

We demonstrate the efficient modulation of flux-tunable superconducting resonators (FTRs) using flip-chip or on-chip-based input coils. The FTRs we use are aluminum-based quarter-wave coplanar waveguide resonators terminated with 100um or 200um-wide square loop dc superconducting quantum interference devices (SQUIDs) employing 1um-sized Josephson junctions. We employ SQUIDs with a geometric loop inductance of up to 0.7nH to increase the flux transfer efficiency. The geometric inductance of the SQUID results in a non-zero screening parameter $β_L$, whose branch switching effect is mitigated by using asymmetric junctions. We achieve flux modulation of the FTRs by more than one GHz and flux responsivities of up to tens of GHz/$Φ_0$ with uA-scale on-chip currents. We compare flip-chip with on-chip input-coil-based flux modulation, where the former is realized through galvanically connected and closely spaced chips, while the latter is achieved through superconducting air-bridge connections. We achieve a flux-transfer efficiency from the input coil to the SQUID loop of up to 20%. Our work paves the way for efficient low current flux modulation of FTRs and sensitive measurement of flux signals.

quant-ph↗

arXiv2025

Superconducting flip-chip devices using indium microspheres on Au-passivated Nb or NbN as under-bump metallization layer

Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip device using commercially available indium microspheres and an in-house-built transfer stage for bonding two chips patterned with superconducting thin films. We use a gold-passivated niobium or niobium nitride layer as an under-bump metallization (UBM) layer between an aluminum-based superconducting wiring layer and the indium interconnect. At millikelvin temperatures, our flip-chip assembly can transport a supercurrent with tens of milliamperes, limited by the smallest geometric feature size and critical current density of the UBM layer and not by the indium interconnect. We show that the pressed indium interconnect itself can carry a supercurrent exceeding 1A due to its large size of about 500 micrometer diameter. Our flip-chip assembly does not require electroplating nor patterning of indium. The assembly process does not need a flip-chip bonder and can be realized with a transfer stage using a top chip with transparency or through-vias for alignment. These flip-chip devices can be utilized in applications that require few superconducting interconnects carrying large currents at millikelvin temperatures.

cond-mat.supr-con↗

arXiv2023

Superconducting microsphere magnetically levitated in an anharmonic potential with integrated magnetic readout

Magnetically levitated superconducting microparticles offer a promising path to quantum experiments with picogram to microgram objects. In this work, we levitate a 700ng $\sim 10^{17}$amu superconducting microsphere in a magnetic chip trap in which detection is integrated. We measure the particle's center-of-mass motion using a DC-SQUID magnetometer. The trap frequencies are continuously tunable between 30 and 160 Hz and the particle remains stably trapped over days in a dilution refrigerator environment. We characterize motional-amplitude-dependent frequency shifts, which arise from trap anharmonicities, namely Duffing nonlinearities and mode couplings. We explain this nonlinear behavior using finite element modelling of the chip-based trap potential. This work constitutes a first step towards quantum experiments and ultrasensitive inertial sensors with magnetically levitated superconducting microparticles.

quant-ph↗

arXiv2022

A chip-based superconducting magnetic trap for levitating superconducting microparticles

Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting particles with diameters from 0.5$\,μ$m to 200$\,μ$m. The trap consists of two stacked silicon chips, each patterned with a planar multi-winding superconducting coil made of niobium. The two coils generate a magnetic field resembling a quadrupole near the trap center, in which we demonstrate trapping of a spherical 50\,$μ$m diameter SnPb microparticle at temperatures of 4\,K and 40\,mK.

cond-mat.supr-con↗