arXiv subjects

Adam J. Biacchi

Publications and source records attributed to Adam J. Biacchi.

13 recordsLinked to original sources

arXiv2023

Raman fingerprints of spin-phonon coupling and magnetic transition in an organic molecule intercalated Cr2Ge2Te6

The manipulation of spin-phonon coupling in both formations and explorations of magnetism in two-dimensional van der Waals ferromagnetic semiconductors facilitates unprecedented prospects for spintronics devices. The interlayer engineering tunes spin-phonon coupling significantly and holds the promise for controllable magnetism via organic cation intercalation. Here, we present spectroscopic evidence to reveal the intercalation effect on intrinsic magnetic and electronic transitions in quasi-two-dimensional Cr2Ge2Te6 using tetrabutyl ammonium as the intercalant. The temperature-evolution of Raman modes E_g^3 and A_g^1, along with the magnetization measurements, unambiguously captures the enhancement of the ferromagnetic Curie temperature in the intercalated heterostructure. Moreover, the E_g^4 mode highlighted the increased effect of spin-phonon interaction in magnetic order-induced lattice distortion. Combined with the first-principle calculations, we observed a substantial number of electrons transferred from TBA+ to Cr through the interface. These results provide the interplay between spin-phonon coupling and magnetic ordering in van der Waals magnets where Raman fingerprints would be highly beneficial for further understanding the manipulation of magnetism in layered heterostructures.

cond-mat.mtrl-sci↗

arXiv2023

JARVIS-Leaderboard: A Large Scale Benchmark of Materials Design Methods

Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard

cond-mat.mtrl-sci↗

arXiv2023

Recent progress in the JARVIS infrastructure for next-generation data-driven materials design

The Joint Automated Repository for Various Integrated Simulations (JARVIS) infrastructure at the National Institute of Standards and Technology (NIST) is a large-scale collection of curated datasets and tools with more than 80000 materials and millions of properties. JARVIS uses a combination of electronic structure, artificial intelligence (AI), advanced computation and experimental methods to accelerate materials design. Here we report some of the new features that were recently included in the infrastructure such as: 1) doubling the number of materials in the database since its first release, 2) including more accurate electronic structure methods such as Quantum Monte Carlo, 3) including graph neural network-based materials design, 4) development of unified force-field, 5) development of a universal tight-binding model, 6) addition of computer-vision tools for advanced microscopy applications, 7) development of a natural language processing tool for text-generation and analysis, 8) debuting a large-scale benchmarking endeavor, 9) including quantum computing algorithms for solids, 10) integrating several experimental datasets and 11) staging several community engagement and outreach events. New classes of materials, properties, and workflows added to the database include superconductors, two-dimensional (2D) magnets, magnetic topological materials, metal-organic frameworks, defects, and interface systems. The rich and reliable datasets, tools, documentation, and tutorials make JARVIS a unique platform for modern materials design. JARVIS ensures openness of data and tools to enhance reproducibility and transparency and to promote a healthy and collaborative scientific environment.

cond-mat.mtrl-sci↗

arXiv2023

Optical Signatures of Strain Differences in Epitaxial Graphene Nanoribbons

We demonstrate the preparation of both armchair and zigzag epitaxial graphene nanoribbons (GNRs) on 4H-SiC using a polymer-assisted, sublimation growth method. Historically, the preparation of GNRs depended on the quality, or smoothness, of the surface changes during growth. The physical phenomenon of terrace step formation introduces the risk of GNR deformation along sidewalls, but the risk is heavily mitigated by this polymer-assisted sublimation method. Two widths (100 nm and 50 nm) are examined electrically and optically for both armchair and zigzag GNRs. Our electrical results support the expected behaviors of the GNRs, while the optical signatures of variable strain reveal the subtle differences among all the GNR species measured.

cond-mat.mtrl-sci↗

arXiv2023

Spectroscopy of photoionization from the $^1E$ singlet state in nitrogen$-$vacancy centers in diamond

The $^1E-^1A_1$ singlet manifold of the negatively charged nitrogen vacancy $(NV^-)$ center in diamond plays a central role in the quantum information and quantum sensing applications of the $NV^-$ center. However, the energy of this manifold within the diamond bandgap and with respect to the $^3A_2-^3E$ triplet manifold has not been measured directly. Using field-quenching effects on photoluminescence (PL) spectra, we report on the energy gap between the $^1E-^1A_1$ singlet manifold and the $^3A_2$ and $^3E$ ground and excited triplet states of the $NV^-$ as a function of excitation wavelength and power, temperature, and applied magnetic field in a heavily nitrogen-doped sample. Increased PL and decreased zero-phonon line width from the $NV^0$ were observed in the presence of an applied magnetic field, indicating ionization from the long-lived $^1E$ singlet state. A temperature-dependent ionization threshold between 532 nm and 550 nm was found, locating the singlet states within the diamond band gap.

quant-ph↗

arXiv2022

High-Throughput DFT-Based Discovery of Next Generation Two-Dimensional (2D) Superconductors

High-throughput density functional theory (DFT) calculations allow for a systematic search for conventional superconductors. With the recent interest in two-dimensional (2D) superconductors, we used a high-throughput workflow to screen over 1,000 2D materials in the JARVIS-DFT database and performed electron-phonon coupling calculations, using the McMillan-Allen-Dynes formula to calculate the superconducting transition temperature ($T_c$) for 165 of them. Of these 165 materials, we identify 34 dynamically stable structures with transition temperatures above 5 K, including materials such as W$_2$N$_3$, NbO$_2$, ZrBrO, TiClO, NaSn$_2$S$_4$, Mg$_2$B$_4$C$_2$ and the previously unreported Mg$_2$B$_4$N$_2$ ($T_c$ = 21.8 K). Finally, we performed experiments to determine the $T_c$ of selected layered superconductors (2H-NbSe$_2$, 2H-NbS$_2$, ZrSiS, FeSe) and discuss the measured results within the context of our DFT results. We aim that the outcome of this workflow can guide future computational and experimental studies of new and emerging 2D superconductors by providing a roadmap of high-throughput DFT data.

cond-mat.supr-con↗

arXiv2022

Specifics of the Elemental Excitations in "True One-Dimensional" MoI$_3$ van der Waals Nanowires

We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate that MoI$_3$ is an easy-plane antiferromagnet with alternating spins along the dimerized chains and with inter-chain helical spin ordering. The calculated frequencies of the phonons and magnons are consistent with the interpretation of the experimental Raman data. The obtained results shed light on the specifics of the phononic and magnonic states in MoI$_3$ and provide a strong motivation for future study of this unique material with potential for spintronic device applications.

cond-mat.mes-hall↗

arXiv2022

Spectroscopic assessment of short-term nitric acid doping of epitaxial graphene

This work reports information on the transience of hole doping in epitaxial graphene devices when nitric acid is used as an adsorbent. Under vacuum conditions, desorption processes are monitored by electrical and spectroscopic means to extract the relevant timescales from the corresponding data. It is of vital importance to understand the reversible nature of hole doping because such device processing can be a suitable alternative to large-scale, metallic gating. Most measurements are performed post-exposure at room temperature, and, for some electrical transport measurements, at 1.5 K. Vacuum conditions are applied to many measurements to replicate the laboratory conditions under which devices using this doping method would be measured. The relevant timescales from transport measurements are compared with results from X-ray photoelecton spectroscopy and Fourier transform infrared spectroscopy measurements, with the latter performed at ambient conditions and accompanied by calculations of the spectra in the Reststrahlen band.

cond-mat.mes-hall↗

arXiv2022

A Comprehensive Study on the Spectroscopic Characterization and Molecular Dynamics Simulation of Pristine and Functionalized Graphene Nanoplatelets for Gas Sensing Applications

Graphene nanoplatelets (GnPs) are promising candidates for gas sensing applications because they have a high surface area to volume ratio, high conductivity, and a high temperature stability. Also, they cost less to synthesize, and they are lightweight, making them even more attractive than other 2D carbon-based materials. In this paper, the surface and structural properties of pristine and functionalized GnPs, specifically with carboxyl, ammonia, carboxyl, nitrogen, oxygen, fluorocarbon, and argon, were examined with Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction (XRD) to determine the functional groups present and effects of those groups on the structural and vibrational properties. We attribute certain features in the observed Raman spectra to the variations in concentration of the functionalized GnPs. XRD results show smaller crystallite sizes for functionalized GnPs samples that agree with images acquired with scanning electron microscopy. Lastly, a molecular dynamics simulation is employed to gain a better understanding of the Raman and adsorption properties of pristine GnPs.

physics.chem-ph↗

arXiv2020

The Joint Automated Repository for Various Integrated Simulations (JARVIS) for data-driven materials design

The Joint Automated Repository for Various Integrated Simulations (JARVIS) is an integrated infrastructure to accelerate materials discovery and design using density functional theory (DFT), classical force-fields (FF), and machine learning (ML) techniques. JARVIS is motivated by the Materials Genome Initiative (MGI) principles of developing open-access databases and tools to reduce the cost and development time of materials discovery, optimization, and deployment. The major features of JARVIS are: JARVIS-DFT, JARVIS-FF, JARVIS-ML, and JARVIS-Tools. To date, JARVIS consists of 40,000 materials and 1 million calculated properties in JARVIS-DFT, 1,500 materials and 110 force-fields in JARVIS-FF, and 25 ML models for material-property predictions in JARVIS-ML, all of which are continuously expanding. JARVIS-Tools provides scripts and workflows for running and analyzing various simulations. We compare our computational data to experiments or high-fidelity computational methods wherever applicable to evaluate error/uncertainty in predictions. In addition to the existing workflows, the infrastructure can support a wide variety of other technologically important applications as part of the data-driven materials design paradigm. The JARVIS datasets and tools are publicly available at the website: https://jarvis.nist.gov .

cond-mat.mtrl-sci↗

arXiv2019

High-throughput Density Functional Perturbation Theory and Machine Learning Predictions of Infrared, Piezoelectric and Dielectric Responses

Many technological applications depend on the response of materials to electric fields, but available databases of such responses are limited. Here, we explore the infrared, piezoelectric and dielectric properties of inorganic materials by combining high-throughput density functional perturbation theory and machine learning approaches. We compute {\Gamma}-point phonons, infrared intensities, Born-effective charges, piezoelectric, and dielectric tensors for 5015 non-metallic materials in the JARVIS-DFT database. We find 3230 and 1943 materials with at least one far and mid-infrared mode, respectively. We identify 577 high-piezoelectric materials, using a threshold of 0.5 C/m2. Using a threshold of 20, we find 593 potential high-dielectric materials. Importantly, we analyze the chemistry, symmetry, dimensionality, and geometry of the materials to find features that help explain variations in our datasets. Finally, we develop high-accuracy regression models for the highest infrared frequency and maximum Born-effective charges, and classification models for maximum piezoelectric and average dielectric tensors to accelerate discovery.

cond-mat.mtrl-sci↗

arXiv2019

Global alignment of solution-based single-wall carbon nanotube films via machine-vision controlled filtration

Over the past decade, substantial progress has been made in the chemical processing (chiral enrichment, length sorting, handedness selectivity, and filling substance) of single-wall carbon nanotubes (SWCNTs). Recently, it was shown that large, horizontally-aligned films can be created out of post-processed SWCNT solutions. Here, we use machine-vision automation and parallelization to simultaneously produce globally-aligned SWCNT films using pressure-driven filtration. Feedback control enables filtration to occur with a constant flow rate that not only improves the nematic ordering of the SWCNT films, but also provides the ability to align a wide range of SWCNT types and on a variety of nanoporous membranes using the same filtration parameters. Using polarized optical spectroscopic techniques, we show that meniscus combing produces a two-dimensional radial SWCNT alignment on one side of the film. After we flatten the meniscus through silanation, spatially-resolved nematicity maps on both sides of the SWCNT film reveal global alignment across the entire structure. From experiments changing ionic strength and membrane tribocharging, we provide evidence that the SWCNT alignment mechanism stems from an interplay of intertube interactions and ordered membrane charging. This work opens up the possibility of creating globally-aligned SWCNT film structures for a new-generation of nanotube electronics and optical control elements.

cond-mat.mes-hall↗

arXiv2018

High-throughput assessment of vacancy formation and surface energies of materials using classical force-fields

In this work, we present an open access database for surface and vacancy-formation energies using classical force-fields (FFs). These quantities are essential in understanding diffusion behavior, nanoparticle formation and catalytic activities. FFs are often designed for a specific application, hence, this database allows the user to understand whether a FF is suitable for investigating particular defect and surface-related material properties. The FF results are compared to density functional theory and experimental data whenever applicable for validation. At present, we have 17,506 surface energies and 1,000 vacancy formation energies calculation in our database and the database is still growing. All the data generated, and the computational tools used, are shared publicly at the following websites https://www.ctcms.nist.gov/~knc6/periodic.html, https://jarvis.nist.gov and https://github.com/usnistgov/jarvis . Approximations used during the high-throughput calculations are clearly mentioned. Using some of the example cases, we show how our data can be used to directly compare different FFs for a material and to interpret experimental findings such as using Wulff construction for predicting equilibrium shape of nanoparticles. Similarly, the vacancy formation energies data can be useful in understanding diffusion related properties.

cond-mat.mtrl-sci↗