arXiv subjects

Aditya Bandopadhyay

Publications and source records attributed to Aditya Bandopadhyay.

At least 19 recordsLinked to original sources

arXiv2025

Techno economic feasibility study of solar ORC in India

Solar energy has enormous potential because there is a worldwide need to meet energy demands. Depleting non-renewable energy resources, increasing carbon emissions, and other environmental effects concern the scientific community to develop an alternative approach to electricity production. In this article, we present the study of a solar-powered Organic Rankine cycle considering Indian climatic conditions. Initially, we scrutinized seven working fluids and assessed their performance in the ORC at an evaporator pressure range of 9-30 bar and a mass flow rate range of 0.2 kg/s to 4.5 kg/s. For a fixed sink temperature of 298 K, we evaluate the system using four different power ratings of 2, 20, 50, and 100 kW based on four different source temperatures of 423 K, 403 K, 383 K, and 363 K. We estimate the system cost for each working fluid in each scenario separately. Our findings suggest that R 1233zd(E) is the optimum performing working fluid based on cost, cost-effectiveness, and environmental friendliness. We also notice that the estimated system scale cost is very competitive and could be a great alternative to the technologies already on the Indian market.

physics.soc-ph↗

arXiv2023

Decoupling the Roles of Defects/Impurities and Wrinkles in Thermal Conductivity of Wafer-scale hBN Films

We demonstrate a non-monotonic evolution of thermal conductivity of large-area hexagonal boron nitride films with thickness. Wrinkles and defects/impurities are present in these films. Raman spectroscopy, an optothermal non-contact technique, is employed to probe the temperature and laser power dependence property of the Raman active E2ghigh phonon mode, which in turn is used to estimate the rise in the temperature of the films under different laser powers. As the conventional Fourier law of heat diffusion cannot be directly employed analytically to evaluate the thermal conductivity of these films with defects and wrinkles, finite element modeling is used instead. In the model, average heat resistance is used to incorporate an overall defect structure, and Voronoi cells with contact resistance at the cell boundaries are constructed to mimic the wrinkled domains. The effective thermal conductivity is estimated to be 87, 55, and 117 W/m.K for the 2, 10, and 30 nm-thick films, respectively. We also present a quantitative estimation of the thermal resistance by defects and wrinkles individually to the heat flow. Our study reveals that the defects/impurities render a much higher resistance to heat transfer in the films than wrinkles.

cond-mat.mtrl-sci↗

arXiv2022

Design of an All-Purpose Terrace Farming Robot

Automation in farming processes is a growing field of research in both academia and industries. A considerable amount of work has been put into this field to develop systems robust enough for farming. Terrace farming, in particular, provides a varying set of challenges, including robust stair climbing methods and stable navigation in unstructured terrains. We propose the design of a novel autonomous terrace farming robot, Aarohi, that can effectively climb steep terraces of considerable heights and execute several farming operations. The design optimisation strategy for the overall mechanical structure is elucidated. Further, the embedded and software architecture along with fail-safe strategies are presented for a working prototype. Algorithms for autonomous traversal over the terrace steps using the scissor lift mechanism and performing various farming operations have also been discussed. The adaptability of the design to specific operational requirements and modular farm tools allow Aarohi to be customised for a wide variety of use cases.

cs.RO↗

arXiv2022

Experimental investigations on geometry modulated solute mixing in viscoelastic media

In this study, geometrically modified microchannels fabricated using stereolithography technique are employed to analyze micromixing of polymeric solutions. Experimental and numerical analyses were conducted to evaluate the qualitative and quantitative validity of the Newtonian fluid flow inside the geometrically modified channels. An in-house image processing code developed in MATLAB was used to analyze the dye concentration distributions resulting from complex fluid transport and mixing within the modified channels. Our analysis illustrates the existence of inertio-elastic instability in the geometrically modified microchannels for the transport of viscoelastic fluids. In addition, the presence of inertio-elastic instability significantly enhances mixing efficiency as a result of the interaction between viscoelasticity and modified channel geometry. This analysis provides important physical insights into the cost-effective design and operation of microfluidic devices that handle viscoelastic fluids and could be useful in designing and analyzing a passive micromixers that transport bio/polymeric fluids inside microchannels.

physics.flu-dyn↗

arXiv2022

Alterations in electroosmotic slip velocity: combined effect of viscoelasticity and surface potential undulation

In computational models of microchannel flows, the Helmholtz-Smoluchowski slip velocity boundary condition is often used because it approximates the motion of the electric double layer without resolving the charge density profiles close to the walls while drastically reducing the computational effort needed for the flow model to be solved. Despite working well for straight channel flow of Newtonian fluids, the approximation does not work well for flow involving complex fluids and spatially varying surface potential distribution. To treat these effects using the slip velocity boundary condition, it is necessary to understand how the surface potential and fluid properties affect the slip velocity. The present analysis shows the existence of a modified electroosmotic slip velocity for viscoelastic fluids, which is strongly dependent upon Deborah number and viscosity ratio, and this modification differs significantly from the slip velocity of Newtonian fluids. An augmentation of fluid elasticity results in an asymmetric distribution of slip velocity. Nonintuitively, the modulation wavelength of the imposed surface potential contributes to changing the slip velocity magnitude and adding periodicity to the solution. The proposed electroosmotic slip velocity for viscoelastic fluid can be used in computational models of microchannel flows to approximate the motion of the electric double layer without resolving the charge density profiles close to the walls.

physics.flu-dyn↗

arXiv2022

Controlling the electrostatic Faraday instability using superposed electric fields

When the interface between a dielectric and a conducting liquid is excited by an oscillatory electric field, electrostatic Faraday waves can be induced. Here, we study the response of the interface to an AC electric field, which is superposed by either a second AC field of different frequency, or by a DC field. An algorithm based on light refraction at the fluidic interface is used to obtain the spatio-temporal response of the Faraday waves, and the critical voltage corresponding to onset of instability, the interfacial oscillation frequency and the dominant wavelengths are determined. The influence of the mixing ratio, which denotes the relative amplitudes of the different components of the driving signal, is analyzed, and the experimental results are compared with theoretical predictions. For AC/AC driving, gradual variations of the mixing ratio can induce a jump of the pattern wavelength, which is a result of the transition from harmonic to a subharmonic oscillation. For AC/DC driving, the interface oscillates either harmonically or subharmonically, and the response wavelength can be tuned continuously by adjusting the admixture of the DC component. For both driving modes, the experiments show good agreement with theory.

physics.flu-dyn↗

arXiv2021

Collaborative Mapping of Archaeological Sites using multiple UAVs

UAVs have found an important application in archaeological mapping. Majority of the existing methods employ an offline method to process the data collected from an archaeological site. They are time-consuming and computationally expensive. In this paper, we present a multi-UAV approach for faster mapping of archaeological sites. Employing a team of UAVs not only reduces the mapping time by distribution of coverage area, but also improves the map accuracy by exchange of information. Through extensive experiments in a realistic simulation (AirSim), we demonstrate the advantages of using a collaborative mapping approach. We then create the first 3D map of the Sadra Fort, a 15th Century Fort located in Gujarat, India using our proposed method. Additionally, we present two novel archaeological datasets recorded in both simulation and real-world to facilitate research on collaborative archaeological mapping. For the benefit of the community, we make the AirSim simulation environment, as well as the datasets publicly available.

cs.RO↗

arXiv2020

Steering a thermally activated micromotor with a nearby isothermal wall

Selective heating of a microparticle surface had been observed to cause its autonomous movement in a fluid medium due to self-generated temperature gradients. In this work, we theoretically investigate the response of such an auto-thermophoretic particle near a planar wall which is held isothermal. We derive an exact solution of the energy equation and employ the Reynolds reciprocal theorem to obtain the translational and rotational swimming velocities in the creeping flow limit. Subsequently, we analyse the trajectories of the micromotor for different thermo-physical and configurational parameters. Results show that the micromotor trajectories can be switched either from wall-bound sliding or stationary state to escape from the near-wall zone by suitably choosing the particle and the surrounding fluid pair having selective thermal conductivity contrasts. Further, we discuss the dependency of this swimming-state transition on the launching orientation and the coverage of the metallic cap. Our results reveal that the scenario addressed here holds several exclusive distinguishing features from the otherwise extensively studied self-diffusiophoresis phenomenon near an inert wall, despite obvious analogies in the respective constitutive laws relating the fluxes with the gradients of the concerned forcing parameters. The most contrasting locomotion behaviour here turns out to be the ability of a self-thermophoretic micromotor to migrate towards the wall with large heated cap even if it is initially directed away from the wall. Besides, during the stationary state of swimming, the cold portion on the micromotor surface faces away from the wall, under all conditions. Such unique aspects of locomotion hold the potential of being harnessed in practice towards achieving intricate control over autonomous motion of microparticles in thermally-regulated fluidic environments.

physics.flu-dyn↗

arXiv2020

Signature of coalescence during scalar mixing in a Rankine vortex

We analyze the dynamics of solute mixing in a vortex flow. The transport of a passive tracer is considered in a Rankine vortex. The action of a shear flow, in general, is to achieve stretching of fluid elements. A vortex flow exhibits stretching and folding of fluid elements in a way which brings adjacent fluid elements closer every turn. A strong stretching along the direction of rotation is accompanied by a concomitant thinning in the radial direction leading to a strong diffusive flux which may cause material from neighbouring regions of the mixing interface to aggregate. Through a Lagrangian concentration evolution technique, the diffusive strip method, we obtain the concentration field and pinpoint the signature of coalescence of two neighbouring concentration regions by analyzing the concentration distribution profiles. We link coalescence with reactivity for mixing-limited reactive flows. The analysis is useful to understand scalar dispersion in vortical flow structures.

physics.flu-dyn↗

arXiv2019

Universality in coalescence of polymeric fluid drops

Coalescence of liquid droplets involves an interplay between capillary forces, viscous forces and inertial forces. Here, we unveil a universal temporal evolution of the neck radius during the coalescence of two polymeric drops. Through high speed imaging we demonstrate that drops of polyacrylamide (PAM), poly-vinyl alcohol (PVA), polyethylene oxide (PEO), polyethylene glycol (PEG) and xanthan gum (XG) depict a universal behavior $R/\sqrt(ν_0λ) \sim (t/λ)^{0.36}(C/C^{*})^{-0.83}$ over a dilute, semi-dilute and non-dilute range of concentrations. A linear Phan-Thein-Tanner viscoelastic model captures the temporal aspect of universality.

physics.flu-dyn↗

arXiv2019

Near-wall hydrodynamic slip triggers swimming state transition of microorganisms

Interaction of motile microrganisms with a nearby solid substrate is a well studied phenomenon. However, the effects of hydrodynamic slippage on the substrate have received a little attention. In the present study, within the framework of the squirmer model, we impose a tangential velocity at the swimmer surface as a representation of the ciliatory propulsion and subsequently obtain exact solution of the Stokes equation based on a combined analytical-numerical approach. We illustrate how the near-wall swimming velocities are non-trivially altered by the interaction of wall slip and hydrodynamic forces. We report a characteristic transition of swimming trajectories for both puller and pusher type microswimmers by hydrodynamic slippage if the wall-slip length crosses a critical value. In case of puller microswimmers that are propelled by a breast-stroke like action of their swimming apparatus ahead of their cell body, the wall slip can cause wall-bound trapping swimming states, either as periodic or damped periodic oscillations which would otherwise escape from a no slip wall. The associated critical slip length has a non-monotonic dependence on the initial orientation of the swimmer which is represented by novel phase diagrams. Pushers, which get their propulsive thrust from posterior flagellar action, also show similar swimming state transitions but in this case the wall slip mediated reorientation dynamics and the swimming modes compete in a different fashion to that of the pullers. The present results pave the way for understanding the motion characteristic of biological microswimmers near confinements with hydrophobic walls or strategize the design of microfluidic devices used for sorting and motion rectification of artificial swimmers by tailoring their surface wettability.

cond-mat.soft↗

arXiv2019

Electrokinetic Power Harvesting from Wet Textile

Developing low-weight, frugal and sustainable power sources for resource-limited settings appears to be a challenging proposition for the advancement of next-generation sensing devices and beyond. Here, we report the use of centimeter-sized simple wet fabric pieces for electrical power generation, by deploying the interplay of a spontaneously induced ionic motion across fabric channels due to capillary action and simultaneous water evaporation by drawing thermal energy from the ambient. Unlike other reported devices with similar functionalities, our arrangement does not necessitate any input mechanical energy or complex topographical structures to be embedded in the substrate. A single device is capable of generating a sustainable open circuit potential up to 700 mV. This suffices establishing an inherent capability of functionalizing self-power electronic devices, and also to be potentially harnessed for enhanced power generation with feasible up-scaling.

physics.app-ph↗

arXiv2019

Electrorheology of a dilute emulsion of surfactant-covered drops

The effects of surfactant coating on a deformable viscous drop under the combined action of a shear flow and a uniform electric field, are investigated by solving the coupled equations of electrostatics, fluid flow and surfactant transport. Employing a comprehensive three-dimensional solution technique, the non-Newtonian shearing response of the bulk emulsion is analyzed in the dilute suspension regime. The present results reveal that the surfactant non-uniformity creates significant alterations in the flow disturbance around the drop, thereby influencing the viscous dissipation from the flowing emulsion. This, in effect, triggers changes in the bulk shear viscosity. It is striking to observe that the balance between electrical and hydrodynamic stresses is affected in such a way that surface tension gradient on the drop surface vanishes for some specific shear rates and the corresponding effective change in the bulk viscosity becomes negligible too. This critical condition hugely depends on the electrical permittivity and conductivity ratios of the two fluids and orientation of the applied electric field. Also the physical mechanisms of charge convection of surface deformation play their role in determining this critical shear rate. The charge convection instigated shear thinning or shear thickening behavior of the emulsion gets reversed due to a coupled interaction of the charge convection and Marangoni stress. In addition, the electrically created anisotropic normal stresses in the bulk rheology, get reduced due to the presence of surfactants, especially when the drop viscosity is much lesser than the continuous fluid. A thorough description of the drop-level flow physics and its connection to the bulk rheology of a dilute emulsion, may provide a fundamental understanding of a more complex emulsion system.

physics.flu-dyn↗

arXiv2018

Auto-electrophoresis in non-Newtonian media: interaction of rheology and electrocatalytic parameters

Recent findings of possible applications of bio-friendly synthetic self-phoretic swimmers, have motivated the researchers in investigating the various motion-generating mechanisms to optimize the operating characteristics of the same. In this paper we model the auto-electrophoretic motion of a bimetallic (Au-Pt) spherical swimmer in a non-Newtonian medium. In view of the fact that many bio-fluids closely follow the generalized Newtonian rheology, the rheology of the surrounding swimming medium is considered to follow the Carreau-Yasuda viscosity model. Further to capture the experimentally observed effects of peroxide concentration and feedback of generated proton concentration on the surface cation flux, we incorporate a Michaelis-Menten like surface reaction kinetics. The electrocatalytic efficiency defined as a ratio between the cost of swimming of an equivalent passively dragged particle and the input chemical energy via surface reaction, is utilized to assess the influence of the rheological parameters on the swimmer performance. The results indicate that the shear thinning and shear thickening nature of the surrounding fluid causes an enhancement and reduction in swimmer velocity, respectively. However, an increase in the shear thinning effect does not always guarantee an efficient operation of the microswimmer. A competition between the particle velocity and reduction in the drag force on the particle, decides whether the propulsion efficiency will have a relative augmentation or attenuation with varying power law index. We further report the existence of maximum efficiency points for some specific range of Weissenberg number and optimum power law indices. Moreover the behaviour of such optimum operating conditions strongly depends on the non-trivial and highly coupled interplay among the rheology and electrocatalytic parameters.

physics.flu-dyn↗

arXiv2018

Electrohydrodynamic migration of a surfactant-coated deformable drop in Poiseuielle flow

In this study we attempt to explore the consequences of surfactant coating on the electrohydrodynamic manipulation of a drop motion in a plane Poiseuielle flow. In addition we consider bulk insoluble surfactants and a linear dependency of the surface tension on the surfactant concentration. Subsequently a double asymptotic perturbation method is used in terms of small electric Reynolds number and capillary number in the limit of a diffusion-dominated surfactant transport mechanism. Also going beyond the widely employed axisymmetric framework, the coupled system of governing differential equations in three dimensions are then solved by adopting the `generalized Lamb solution technique'. The expressions of key variables suggest that the flow curvature of the external flow, the electric field effects and the surfactant effects are coupled in a non-trivial manner, well beyond a linear superposition. A careful investigation shows that surfactant-induced Marangoni stresses interacts with the electrohydrodynamic stresses in a highly coupled fashion. Owing to this, under different combinations of electrical conductivity and permittivity ratios, the Mason number and the applied electric field direction, the surfactants affect differently on the longitudinal as well as cross-stream migration velocity of the drop. The present results may be of utmost importance in providing a deep insight to the underlying complex physical mechanisms. Most importantly the ability of surfactants in selectively controlling the drop motion in different directions, makes them suitable for achieving a new degree of freedom in the electrical actuation of droplets in the microfluidic devices.

physics.flu-dyn↗

arXiv2018

Electric field-induced droplet deflection in microconfined flow

The deflection of liquid droplet driven through a liquid medium under the combined action of transverse electric field and pressure driven flow has been studied in the present analysis. The present experimental and numerical analysis identifies the domain confinement as a key parameter for transverse migration of the droplets in the presence of a transverse electric field. Notably, the droplet migrates at a faster rate in highly confined domain. The present analysis also illustrates that the droplet can migrate toward the wall electrode or centerline depending on the physical and electrical properties of the system. The achieved steady state transverse position is found independent of its initial positions.

physics.flu-dyn↗

arXiv2018

Sedimentation of a surfactant-laden drop under the influence of an electric field

The sedimentation of a surfactant-laden deformable viscous drop acted upon by an electric field is considered theoretically. The convection of surfactants in conjunction with the the combined effect electrohydrodynamic flow and sedimentation leads to a locally varying surface tension, which subsequently alters the drop dynamics via the interplay of Marangoni, Maxwell and hydrodynamic stresses. Assuming small capillary number and small electric Reynolds number, we employ a regular perturbation technique to solve the coupled system of governing equations. It is shown that when a leaky dielectric drop is sedimenting in another leaky dielectric fluid, Marangoni stress can oppose the electrohydrodynamic motion severely, thereby causing corresponding changes in internal flow pattern. Such effects further result in retardation of drop settling velocity, which would have otherwise increased due to the influence of charge convection. For highly mobile surfactants (high Peclet number limit), the drop surface becomes immobilized and the charge convection effect gets completely eliminated. For non-spherical drop shapes, the effect of Marangoni stress is overcome by the 'tip stretching' effect on the flow field. As a result, the drop deformation gets intensified with increment in sensitivity of surface tension to the local surfactant concentration. Consequently, for oblate type of deformation the elevated drag force causes further reduction in velocity. Owing to similar reasons, prolate drops experience lesser drag and settles faster than the surfactant-free case. In addition to this, with increased sensitivity of interfacial tension on the surfactant concentration, the asymmetric deformation about the equator gets suppressed.

physics.flu-dyn↗

arXiv2017

Stability of a horizontal viscous fluid layer in a vertical time periodic electric field

The stability of a horizontal interface between two viscous fluids, one of which is conducting and the other is dielectric, acted upon by a vertical time-periodic electric field is considered. The two fluids are bounded by electrodes separated by a finite distance. By means of Floquet theory, the marginal stability curves are obtained, thereby elucidating the dependency of the critical voltage and wavenumber upon the fluid viscosities. The limit of vanishing viscosities is shown to be in excellent agreement with the marginal stability curves predicted by means of a Mathieu equation. The methodology to obtain the marginal stability curves developed here is applicable to any arbitrary but time periodic-signal, as demonstrated for the case of a signal with two different frequencies. As a special case, the marginal stability curves for an applied ac voltage biased by a dc voltage are depicted. It is shown that the mode coupling caused by the normal stress at the interface due to the electric field leads to appearance of harmonic modes and subharmonic modes. This is in contrast to the application of a voltage with a single frequency which always leads to a harmonic mode. Whether a harmonic or subharmonic mode is the most unstable one depends on details of the excitation signal. It is also shown that the electrode spacing has a distinct effect on the stability bahavior of the system.

physics.flu-dyn↗