arXiv subjects

Adriana E. Lita

Publications and source records attributed to Adriana E. Lita.

26 records · Page 2Linked to original sources

arXiv2015

Tomography of photon-number resolving continuous-output detectors

We report a comprehensive approach to analysing continuous-output photon detectors. We employ principal component analysis to maximise the information extracted, followed by a novel noise-tolerant parameterised approach to the tomography of PNRDs. We further propose a measure for rigorously quantifying a detector's photon-number-resolving capability. Our approach applies to all detectors with continuous-output signals. We illustrate our methods by applying them to experimental data obtained from a transition-edge sensor (TES) detector.

quant-ph↗

arXiv2013

High quantum-efficiency photon-number-resolving detector for photonic on-chip information processing

The integrated optical circuit is a promising architecture for the realization of complex quantum optical states and information networks. One element that is required for many of these applications is a high-efficiency photon detector capable of photon-number discrimination. We present an integrated photonic system in the telecom band at 1550 nm based on UV-written silica-on-silicon waveguides and modified transition-edge sensors capable of number resolution and over 40% efficiency. Exploiting the mode transmission failure of these devices, we multiplex three detectors in series to demonstrate a combined 79% +/- 2% detection efficiency with a single pass, and 88% +/- 3% at the operating wavelength of an on-chip terminal reflection grating. Furthermore, our optical measurements clearly demonstrate no significant unexplained loss in this system due to scattering or reflections. This waveguide and detector design therefore allows the placement of number-resolving single-photon detectors of predictable efficiency at arbitrary locations within a photonic circuit - a capability that offers great potential for many quantum optical applications.

quant-ph↗

arXiv2012

Nanosecond-scale timing jitter in transition edge sensors at telecom and visible wavelengths

Transition edge sensors (TES) have the highest reported efficiencies (>98%) for detection of single photons in the visible and near infrared. Experiments in quantum information and foundations of physics that rely critically on this efficiency have started incorporating these detectors into con- ventional quantum optics setups. However, their range of applicability has been hindered by slow operation both in recovery time and timing jitter. We show here how a conventional tungsten-TES can be operated with jitter times of < 4 ns, well within the timing resolution necessary for MHz clocking of experiments, and providing an important practical simplification for experiments that rely on the simultaneous closing of both efficiency and locality loopholes.

quant-ph↗

arXiv2011

On-chip, photon-number-resolving, telecom-band detectors for scalable photonic information processing

Integration is currently the only feasible route towards scalable photonic quantum processing devices that are sufficiently complex to be genuinely useful in computing, metrology, and simulation. Embedded on-chip detection will be critical to such devices. We demonstrate an integrated photon-number resolving detector, operating in the telecom band at 1550 nm, employing an evanescently coupled design that allows it to be placed at arbitrary locations within a planar circuit. Up to 5 photons are resolved in the guided optical mode via absorption from the evanescent field into a tungsten transition-edge sensor. The detection efficiency is 7.2 \pm 0.5 %. The polarization sensitivity of the detector is also demonstrated. Detailed modeling of device designs shows a clear and feasible route to reaching high detection efficiencies.

quant-ph↗

arXiv2011

Generation of Optical Coherent State Superpositions by Number-Resolved Photon Subtraction from Squeezed Vacuum

We have created heralded coherent state superpositions (CSS), by subtracting up to three photons from a pulse of squeezed vacuum light. To produce such CSSs at a sufficient rate, we used our high-efficiency photon-number-resolving transition edge sensor to detect the subtracted photons. This is the first experiment enabled by and utilizing the full photon-number-resolving capabilities of this detector. The CSS produced by three-photon subtraction had a mean photon number of 2.75 -0.24/+0.06 and a fidelity of 0.59 -0.14/+0.04 with an ideal CSS. This confirms that subtracting more photons results in higher-amplitude CSSs.

quant-ph↗

arXiv2007

Long distance decoy state quantum key distribution in optical fiber

The theoretical existence of photon-number-splitting attacks creates a security loophole for most quantum key distribution (QKD) demonstrations that use a highly attenuated laser source. Using ultra-low-noise, high-efficiency transition-edge sensor photodetectors, we have implemented the first version of a decoy-state protocol that incorporates finite statistics without the use of Gaussian approximations in a one-way QKD system, enabling the creation of secure keys immune to photon-number-splitting attacks and highly resistant to Trojan horse attacks over 107 km of optical fiber.

quant-ph↗

arXiv2005

Quantum key distribution at telecom wavelengths with noise-free detectors

The length of a secure link over which a quantum key can be distributed depends on the efficiency and dark-count rate of the detectors used at the receiver. We report on the first demonstration of quantum key distribution using transition-edge sensors with high efficiency and negligible dark-count rates. Using two methods of synchronization, a bright optical pulse scheme and an electrical signal scheme, we have successfully distributed key material at 1,550 nm over 50 km of optical fiber. We discuss how use of these detectors in a quantum key distribution system can result in dramatic increases in range and performance.

quant-ph↗

arXiv2005

Noise-free high-efficiency photon-number-resolving detectors

High-efficiency optical detectors that can determine the number of photons in a pulse of monochromatic light have applications in a variety of physics studies, including post-selection-based entanglement protocols for linear optics quantum computing and experiments that simultaneously close the detection and communication loopholes of Bell's inequalities. Here we report on our demonstration of fiber-coupled, noise-free, photon-number-resolving transition-edge sensors with 88% efficiency at 1550 nm. The efficiency of these sensors could be made even higher at any wavelength in the visible and near-infrared spectrum without resulting in a higher dark-count rate or degraded photon-number resolution.

quant-ph↗