arXiv subjects

Agastya Kapur

Publications and source records attributed to Agastya Kapur.

16 recordsLinked to original sources

arXiv2026

Discovery of Two Consecutive Profile Change Events in the Millisecond Pulsar PSR J0437-4715

The closest and brightest millisecond pulsar (MSP), PSR J0437-4715, is a high-priority pulsar for precision timing experiments, including the Parkes Pulsar Timing Array (PPTA) project, where it is used for both pulsar timing and for polarization calibration. Using approximately seven years of observations obtained with the Ultra-Wideband Low-Frequency receiver on Murriyang, CSIRO's Parkes radio telescope, we investigate the long-term spectro-polarimetric variability of PSR J0437-4715. We report the discovery of two consecutive discrete profile change events exhibiting the same phase-localised morphological variations, the first such behaviour reported in any MSP. Both events affect three phase-localised regions of the pulse profile that exhibit coupled and anti-correlated temporal evolution. We also identified, and corrected for, systematic profile variability induced by polarization calibration errors arising from long-term drift of the polarimetric properties of the receiver. The profile change exhibits frequency-dependent evolution in total intensity, together with variations in linear polarization, position angle and fractional linear polarization. These results confirm a magnetospheric origin for the events rather than propagation effects caused by the interstellar medium, and provide potential new constraints on MSP emission models.

astro-ph.HE↗

arXiv2026

Targeted search for eccentric supermassive binary black holes in OJ 287 and nearby galaxy clusters with PPTA DR3

We perform Bayesian targeted searches for continuous gravitational waves from eccentric supermassive binary black holes (SMBBHs) using the Parkes Pulsar Timing Array third data release (PPTA DR3). Six electromagnetically motivated sky directions are analyzed, including the blazar OJ~287 and five nearby galaxy clusters (Virgo, Fornax, Norma, Hercules, and Coma). No significant signals are found. For OJ 287, by explicitly incorporating orbital eccentricity (up to $e_0 = 0.8$) to robustly capture signal power spread across multiple harmonics, we constrain the total binary mass to $M_{\rm tot} < 5.25 \times 10^{10} M_{\odot}$ (95\% credible level). We also place upper limits on the chirp mass of potential SMBBHs residing in galaxy clusters. By combining these limits with independent black hole mass estimates, we place novel constraints on the allowed binary mass ratios for potential hosts such as M87 and NGC~4889. Specifically, our results exclude binaries with mass ratios $q \gtrsim 10^{-2}$ at around 10 nHz for these massive systems, effectively ruling out equal-mass black hole mergers in the sampled parameter space. These findings demonstrate the growing power of pulsar timing arrays to probe SMBBH populations.

astro-ph.GA↗

arXiv2026

A Multimessenger Search for the Supermassive Black Hole Binary in 3C 66B with the Parkes Pulsar Timing Array

A subparsec supermassive black hole binary (SMBHB) at the center of the galaxy 3C 66B is a promising candidate for continuous gravitational-wave searches with pulsar timing arrays (PTAs). In this work, we search for such a signal in the third data release of the Parkes Pulsar Timing Array. Matching our priors to estimates of binary parameters from electromagnetic observations, we find a log Bayes factor $\ln B = - 0.0027(7)$, highlighting that the source can be neither confirmed nor ruled out. We place upper limits at $95\%$ credibility on the chirp mass $M < 6.90 \times 10^{8}\ M_{\odot}$, and on the characteristic strain amplitude $\textrm{log}_{10}(h_0)< -14.44$. This partially rules out the parameter space suggested by electromagnetic (EM) observations of 3C 66B. We also independently reproduce the calculation of the chirp mass with the 3 mm flux monitor data from the unresolved core of 3C 66B. Based on this, we outline a new methodology for constructing a joint likelihood of EM and gravitational-wave data from SMBHBs. Finally, we suggest that targeted searches may allow firmly established SMBHB candidates to be treated as standard sirens, for complementary constraints on the Universe expansion rate.

astro-ph.HE↗

arXiv2026

Frequency- and phase-resolved polarimetry of millisecond pulsars and its application to timing

Pulsar timing is used for a variety of applications including tests of fundamental physics, probing the structure of neutron stars, and detecting nanohertz gravitational waves. Development of robust methods and generation of high-quality timing data is therefore of utmost importance. In this paper, we present a new technique for creating high-fidelity templates that can be used to measure the pulse times of arrival with significantly increased precision compared to existing methods. Our framework makes use of all available polarimetric information to generate frequency-dependent models of pulse-shape evolution of all four Stokes parameters. We apply this method to millisecond pulsars observed by the Parkes Pulsar Timing Array and show that it results in timing measurement uncertainties reduced up to $\sim$20-30%. We also present, for the first time, phase- and frequency-resolved polarimetric measurements of millisecond pulsars observed with the Parkes Murriyang ultra-widebandwith-low receiver. The data, plots and the code underlying this analysis are made publicly available.

astro-ph.HE↗

arXiv2026

Searching for Anisotropy in the Gravitational Wave Background Using the Parkes Pulsar Timing Array

In recent years, several pulsar timing array collaborations have reported evidence for a nanohertz gravitational wave background (GWB). Such a background signal could be produced by supermassive binary black holes, early-Universe processes such as inflation and phase transitions, or a mixture of both. One way to disentangle different contributions to the GWB is to search for anisotropic signatures. In this work, we search for anisotropy in the GWB using the third data release of the Parkes Pulsar Timing Array. Our analysis employs both the radiometer method and the spherical harmonic basis to characterize the distribution of GWB power across the sky. We calculate the angular power in the lowest five frequency bins and compare it with detection thresholds determined under the null hypothesis of isotropy. In the 5.26 nHz frequency bin, we identify a hotspot in the reconstructed sky map with a $p$-value of $0.016$ (the lowest in our analysis), which we attribute to noise fluctuations. While our search reveals no statistically significant anisotropy, we expect that the precise measurement of angular power spectrum of the GWB will become instrumental in determining the origin of the nanohertz GWB signal.

astro-ph.HE↗

arXiv2026

Pulsar Polarization Array Limits on Ultralight Axion-like Dark Matter

We conduct the first-ever Pulsar Polarization Array (PPA) analysis to detect the ultralight Axion-Like Dark Matter (ALDM) using the polarization data of 22 millisecond pulsars from the third data release of Parkes Pulsar Timing Array. As one of the major dark matter candidates, the ultralight ALDM exhibits a pronounced wave nature on astronomical scales and offers a promising solution to small-scale structure issues within local galaxies. While the linearly polarized pulsar light travels through the ALDM galactic halo, its position angle (PA) can be subject to an oscillation induced by the ALDM Chern-Simons coupling with electromagnetic field. The PPA is thus especially suited for detecting the ultralight ALDM by correlating polarization data across the arrayed pulsars. To accomplish this task, we develop an advanced Bayesian analysis framework that allows us to construct pulsar PA residual time series, model noise contributions properly and search for pulsar cross-correlations. We find that for an ALDM density of $ρ_0=0.4\,\textrm{GeV}/\textrm{cm}^3$, the Parkes PPA offers the best global limits on the ALDM Chern-Simons coupling, namely $\lesssim 10^{-13.5}-10^{-12.2}~{\rm GeV}^{-1}$, for the mass range of $10^{-22} - 10^{-21}~{\rm eV}$. The crucial role of pulsar cross-correlation in recognizing the nature of the derived limits is also highlighted.

astro-ph.HE↗

arXiv2025

Searching for continuous gravitational waves in the Parkes Pulsar Timing Array Data Release 3

We present results from an all-sky search for continuous gravitational waves from individual supermassive binary black holes using the third data release (DR3) of the Parkes Pulsar Timing Array (PPTA). Even though we recover a common-spectrum stochastic process, potentially induced by a nanohertz gravitational wave background, we find no evidence of continuous waves. Therefore, we place upper limits on the gravitational-wave strain amplitude: in the most sensitive frequency range around 10 nHz, we obtain a sky-averaged 95\% credibility upper limit of $\approx 7 \times 10^{-15}$. Our search is sensitive to supermassive binary black holes with a chirp mass of $\geq 10^9M_{\odot}$ up to a luminosity distance of 50 Mpc for our least sensitive sky direction and 200 Mpc for the most sensitive direction. This work provides at least 4 times better sensitivity in the 1-200 nHz frequency band than our last search based on the PPTA's first data release. We expect that PPTA will continue to play a key role in detecting continuous gravitational waves in the exciting era of nanohertz gravitational wave astronomy.

gr-qc↗

arXiv2025

Ultra-Wideband Polarimetry of the April 2021 Profile Change Event in PSR J1713+0747

The millisecond pulsar PSR J1713+0747 is a high-priority target for pulsar timing array experiments due to its long-term timing stability, and bright, narrow pulse profile. In April 2021, PSR~J1713$+$0747 underwent a significant profile change event, observed by several telescopes worldwide. Using the broad-bandwidth and polarimetric fidelity of the Ultra-Wideband Low-frequency receiver on Murriyang, CSIRO's Parkes radio telescope, we investigated the long-term spectro-polarimetric behaviour of this profile change in detail. We highlight the broad-bandwidth nature of the event, which exhibits frequency dependence that is inconsistent with cold-plasma propagation effects. We also find that spectral and temporal variations are stronger in one of the orthogonal polarisation modes than the other, and observe mild variations ($\sim 3$ - $5\,σ$ significance) in circular polarisation above 1400 MHz following the event. However, the linear polarisation position angle remained remarkably stable in the profile leading edge throughout the event. With over three years of data post-event, we find that the profile has not yet recovered back to its original state, indicating a long-term asymptotic recovery, or a potential reconfiguration of the pulsar's magnetic field. These findings favour a magnetospheric origin of the profile change event over a line-of-sight propagation effect in the interstellar medium.

astro-ph.HE↗

arXiv2025

Rapid Construction of Joint Pulsar Timing Array Datasets: The Lite Method

The International Pulsar Timing Array (IPTA)'s second data release (IPTA DR2) combines decades of observations of 65 millisecond pulsars from 7 radio telescopes. IPTA datasets should be the most sensitive datasets to nanohertz gravitational waves (GWs), but take years to assemble, often excluding valuable recent data. To address this, we introduce the IPTA "Lite" analysis, where a Figure of Merit is used to select an optimal PTA dataset to analyze for each pulsar, enabling immediate access to new data and preliminary results prior to full combination. We test the capabilities of the Lite analysis using IPTA DR2, finding that "DR2 Lite" can be used to detect the common red noise process with an amplitude of $A = 4.8^{+1.8}_{-1.8} \times 10^{-15}$ at $γ= 13/3$. This amplitude is slightly large in comparison to the combined analysis, and likely biased high as DR2 Lite is more sensitive to systematic errors from individual pulsars than the full dataset. Furthermore, although there is no strong evidence for Hellings-Downs correlations in IPTA DR2, we still find the full dataset is better at resolving Hellings-Downs correlations than DR2 Lite. Alongside the Lite analysis, we also find that analyzing a subset of pulsars from IPTA DR2, available at a hypothetical "early" stage of combination (EDR2), yields equally competitive results as the full dataset. Looking ahead, the Lite method will enable rapid synthesis of the latest PTA data, offering preliminary GW constraints before the superior full dataset combinations are available.

astro-ph.HE↗

arXiv2025

Searching for gravitational-wave bursts from cosmic string cusps with the Parkes Pulsar Timing Array third data release

Pulsar timing arrays (PTAs) are designed to detect nanohertz-frequency gravitational waves (GWs). Since GWs are anticipated from cosmic strings, PTAs offer a viable approach to testing their existence. We present the results of the first Bayesian search for gravitational-wave bursts from cosmic string cusps (GWCS) using the third PPTA data release for 30 millisecond pulsars. In this data collection, we find no evidence for GWCS signals. We compare a model with a GWCS signal to one with only noise, including a common spatially uncorrelated red noise (CURN), and find that our data is more consistent with the noise-only model.We then establish upper limits on the strain amplitude of GWCS at the pulsar term, based on the analysis of 30 millisecond pulsars, after finding no compelling evidence. We find the addition of a CURN with different spectral indices into the noise model has a negligible impact on the upper limits. And the upper limit range of the amplitude of the pulsar-term GWCS is concentrated between 10^{-12} and 10^{-11}. Finally, we set upper limits on the amplitude of GWCS events, parametrized by width and event epoch, for a single pulsar PSR J1857+0943. Moreover, we derive upper limit on the cosmic string tension as a function of burst width and compare it with previous results.

gr-qc↗

arXiv2024

The neutron star mass, distance, and inclination from precision timing of the brilliant millisecond pulsar J0437$-$4715

The observation of neutron stars enables the otherwise impossible study of fundamental physical processes. The timing of binary radio pulsars is particularly powerful, as it enables precise characterization of their (three-dimensional) positions and orbits. PSR~J0437$-$4715 is an important millisecond pulsar for timing array experiments and is also a primary target for the Neutron Star Interior Composition Explorer (NICER). The main aim of the NICER mission is to constrain the neutron star equation of state by inferring the compactness ($M_p/R$) of the star. Direct measurements of the mass $M_p$ from pulsar timing therefore substantially improve constraints on the radius $R$ and the equation of state. Here we use observations spanning 26 years from Murriyang, the 64-m Parkes radio telescope, to improve the timing model for this pulsar. Among the new precise measurements are the pulsar mass $M_p=1.418\pm 0.044$ $M_{\odot}$, distance $D=156.96 \pm 0.11$ pc, and orbital inclination angle $i=137.506 \pm 0.016^\circ$, which can be used to inform the X-ray pulse profile models inferred from NICER observations. We demonstrate that these results are consistent between multiple data sets from the Parkes Pulsar Timing Array (PPTA), each modeled with different noise assumptions. Using the longest available PPTA data set, we measure an apparent second derivative of the pulsar spin frequency and discuss how this can be explained either by kinematic effects due to the proper motion and radial velocity of the pulsar or excess low-frequency noise such as a gravitational-wave background.

astro-ph.HE↗

arXiv2024

Reducing instrumental errors in Parkes Pulsar Timing Array data

This paper demonstrates the impact of state-of-the-art instrumental calibration techniques on the precision of arrival times obtained from 9.6 years of observations of millisecond pulsars using the Murriyang 64-m CSIRO Parkes Radio Telescope. Our study focuses on 21-cm observations of 25 high-priority pulsars that are regularly observed as part of the Parkes Pulsar Timing Array (PPTA) project, including those predicted to be the most susceptible to calibration errors. We employ Measurement Equation Template Matching (METM) for instrumental calibration and Matrix Template Matching (MTM) for arrival time estimation, resulting in significantly improved timing residuals with up to a sixfold reduction in white noise compared to arrival times estimated using Scalar Template Matching and conventional calibration based on the Ideal Feed Assumption. The median relative reduction in white noise is 33 percent, and the maximum absolute reduction is 4.5 microseconds. For PSR J0437-4715, METM and MTM reduce the best-fit power-law amplitude (2.7 sigma) and spectral index (1.7 sigma) of the red noise in the arrival time residuals, which can can be tentatively interpreted as mitigation of 1/f noise due to otherwise unmodeled steps in polarimetric response. These findings demonstrate the potential to directly enhance the sensitivity of pulsar timing array experiments through more accurate methods of instrumental calibration and arrival time estimation.

astro-ph.IM↗

arXiv2023

The Parkes Pulsar Timing Array Third Data Release

We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release.

astro-ph.HE↗

arXiv2023

Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array

Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array.

astro-ph.HE↗

arXiv2023

The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array

The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission.

astro-ph.HE↗

arXiv2022

Wideband timing of the Parkes Pulsar Timing Array UWL data

In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compared to typical narrow-band methods are, firstly, generation of two-dimensional templates accounting for pulse shape evolution with frequency and, secondly, simultaneous measurements of the pulse time-of-arrival (ToA) and dispersion measure (DM). This is the first time that wideband timing has been applied to a uniform data set collected with a single large-fractional bandwidth receiver, for which such techniques were originally developed. As a result of our study, we present a set of profile evolution models and new timing solutions including initial noise analysis. Precision of our ToA and DM measurements is in the range of 0.005 $-$ 2.08 $μ$s and (0.043$-$14.24)$\times10^{-4}$ cm$^{-3}$ pc, respectively, with 94% of the pulsars achieving a median ToA uncertainty of less than 1 $μ$s.

astro-ph.HE↗