arXiv subjects

Aggelos K. Katsaggelos

Publications and source records attributed to Aggelos K. Katsaggelos.

At least 55 records · Page 3Linked to original sources

arXiv2022

A Deep Generative Approach to Oversampling in Ptychography

Ptychography is a well-studied phase imaging method that makes non-invasive imaging possible at a nanometer scale. It has developed into a mainstream technique with various applications across a range of areas such as material science or the defense industry. One major drawback of ptychography is the long data acquisition time due to the high overlap requirement between adjacent illumination areas to achieve a reasonable reconstruction. Traditional approaches with reduced overlap between scanning areas result in reconstructions with artifacts. In this paper, we propose complementing sparsely acquired or undersampled data with data sampled from a deep generative network to satisfy the oversampling requirement in ptychography. Because the deep generative network is pre-trained and its output can be computed as we collect data, the experimental data and the time to acquire the data can be reduced. We validate the method by presenting the reconstruction quality compared to the previously proposed and traditional approaches and comment on the strengths and drawbacks of the proposed approach.

eess.IV↗

arXiv2022

Discriminative Dimensionality Reduction using Deep Neural Networks for Clustering of LIGO Data

In this paper, leveraging the capabilities of neural networks for modeling the non-linearities that exist in the data, we propose several models that can project data into a low dimensional, discriminative, and smooth manifold. The proposed models can transfer knowledge from the domain of known classes to a new domain where the classes are unknown. A clustering algorithm is further applied in the new domain to find potentially new classes from the pool of unlabeled data. The research problem and data for this paper originated from the Gravity Spy project which is a side project of Advanced Laser Interferometer Gravitational-wave Observatory (LIGO). The LIGO project aims at detecting cosmic gravitational waves using huge detectors. However non-cosmic, non-Gaussian disturbances known as "glitches", show up in gravitational-wave data of LIGO. This is undesirable as it creates problems for the gravitational wave detection process. Gravity Spy aids in glitch identification with the purpose of understanding their origin. Since new types of glitches appear over time, one of the objective of Gravity Spy is to create new glitch classes. Towards this task, we offer a methodology in this paper to accomplish this.

astro-ph.IM↗

arXiv2022

Compressive Ptychography using Deep Image and Generative Priors

Ptychography is a well-established coherent diffraction imaging technique that enables non-invasive imaging of samples at a nanometer scale. It has been extensively used in various areas such as the defense industry or materials science. One major limitation of ptychography is the long data acquisition time due to mechanical scanning of the sample; therefore, approaches to reduce the scan points are highly desired. However, reconstructions with less number of scan points lead to imaging artifacts and significant distortions, hindering a quantitative evaluation of the results. To address this bottleneck, we propose a generative model combining deep image priors with deep generative priors. The self-training approach optimizes the deep generative neural network to create a solution for a given dataset. We complement our approach with a prior acquired from a previously trained discriminator network to avoid a possible divergence from the desired output caused by the noise in the measurements. We also suggest using the total variation as a complementary before combat artifacts due to measurement noise. We analyze our approach with numerical experiments through different probe overlap percentages and varying noise levels. We also demonstrate improved reconstruction accuracy compared to the state-of-the-art method and discuss the advantages and disadvantages of our approach.

cs.CV↗

arXiv2022

medXGAN: Visual Explanations for Medical Classifiers through a Generative Latent Space

Despite the surge of deep learning in the past decade, some users are skeptical to deploy these models in practice due to their black-box nature. Specifically, in the medical space where there are severe potential repercussions, we need to develop methods to gain confidence in the models' decisions. To this end, we propose a novel medical imaging generative adversarial framework, medXGAN (medical eXplanation GAN), to visually explain what a medical classifier focuses on in its binary predictions. By encoding domain knowledge of medical images, we are able to disentangle anatomical structure and pathology, leading to fine-grained visualization through latent interpolation. Furthermore, we optimize the latent space such that interpolation explains how the features contribute to the classifier's output. Our method outperforms baselines such as Gradient-Weighted Class Activation Mapping (Grad-CAM) and Integrated Gradients in localization and explanatory ability. Additionally, a combination of the medXGAN with Integrated Gradients can yield explanations more robust to noise. The code is available at: https://avdravid.github.io/medXGAN_page/.

cs.CV↗

arXiv2022

Discrete, recurrent, and scalable patterns in human judgement underlie affective picture ratings

Operant keypress tasks, where each action has a consequence, have been analogized to the construct of "wanting" and produce lawful relationships in humans that quantify preferences for approach and avoidance behavior. It is unknown if rating tasks without an operant framework, which can be analogized to "liking", show similar lawful relationships. We studied three independent cohorts of participants (N = 501, 506, and 4,019 participants) collected by two distinct organizations, using the same 7-point Likert scale to rate negative to positive preferences for pictures from the International Affective Picture Set. Picture ratings without an operant framework produced similar value functions, limit functions, and trade-off functions to those reported in the literature for operant keypress tasks, all with goodness of fits above 0.75. These value, limit, and trade-off functions were discrete in their mathematical formulation, recurrent across all three independent cohorts, and demonstrated scaling between individual and group curves. In all three experiments, the computation of loss aversion showed 95% confidence intervals below the value of 2, arguing against a strong overweighting of losses relative to gains, as has previously been reported for keypress tasks or games of chance with calibrated uncertainty. Graphed features from the three cohorts were similar and argue that preference assessments meet three of four criteria for lawfulness, providing a simple, short, and low-cost method for the quantitative assessment of preference without forced choice decisions, games of chance, or operant keypressing. This approach can easily be implemented on any digital device with a screen (e.g., cellphones).

cs.HC↗

arXiv2022

Investigating the Potential of Auxiliary-Classifier GANs for Image Classification in Low Data Regimes

Generative Adversarial Networks (GANs) have shown promise in augmenting datasets and boosting convolutional neural networks' (CNN) performance on image classification tasks. But they introduce more hyperparameters to tune as well as the need for additional time and computational power to train supplementary to the CNN. In this work, we examine the potential for Auxiliary-Classifier GANs (AC-GANs) as a 'one-stop-shop' architecture for image classification, particularly in low data regimes. Additionally, we explore modifications to the typical AC-GAN framework, changing the generator's latent space sampling scheme and employing a Wasserstein loss with gradient penalty to stabilize the simultaneous training of image synthesis and classification. Through experiments on images of varying resolutions and complexity, we demonstrate that AC-GANs show promise in image classification, achieving competitive performance with standard CNNs. These methods can be employed as an 'all-in-one' framework with particular utility in the absence of large amounts of training data.

cs.CV↗

arXiv2021

Visual Explanations for Convolutional Neural Networks via Latent Traversal of Generative Adversarial Networks

Lack of explainability in artificial intelligence, specifically deep neural networks, remains a bottleneck for implementing models in practice. Popular techniques such as Gradient-weighted Class Activation Mapping (Grad-CAM) provide a coarse map of salient features in an image, which rarely tells the whole story of what a convolutional neural network (CNN) learned. Using COVID-19 chest X-rays, we present a method for interpreting what a CNN has learned by utilizing Generative Adversarial Networks (GANs). Our GAN framework disentangles lung structure from COVID-19 features. Using this GAN, we can visualize the transition of a pair of COVID negative lungs in a chest radiograph to a COVID positive pair by interpolating in the latent space of the GAN, which provides fine-grained visualization of how the CNN responds to varying features within the lungs.

cs.CV↗

arXiv2021

Removing Blocking Artifacts in Video Streams Using Event Cameras

In this paper, we propose EveRestNet, a convolutional neural network designed to remove blocking artifacts in videostreams using events from neuromorphic sensors. We first degrade the video frame using a quadtree structure to produce the blocking artifacts to simulate transmitting a video under a heavily constrained bandwidth. Events from the neuromorphic sensor are also simulated, but are transmitted in full. Using the distorted frames and the event stream, EveRestNet is able to improve the image quality.

eess.IV↗

arXiv2021

Snapshot Compressive Imaging: Principle, Implementation, Theory, Algorithms and Applications

Capturing high-dimensional (HD) data is a long-term challenge in signal processing and related fields. Snapshot compressive imaging (SCI) uses a two-dimensional (2D) detector to capture HD ($\ge3$D) data in a {\em snapshot} measurement. Via novel optical designs, the 2D detector samples the HD data in a {\em compressive} manner; following this, algorithms are employed to reconstruct the desired HD data-cube. SCI has been used in hyperspectral imaging, video, holography, tomography, focal depth imaging, polarization imaging, microscopy, \etc.~Though the hardware has been investigated for more than a decade, the theoretical guarantees have only recently been derived. Inspired by deep learning, various deep neural networks have also been developed to reconstruct the HD data-cube in spectral SCI and video SCI. This article reviews recent advances in SCI hardware, theory and algorithms, including both optimization-based and deep-learning-based algorithms. Diverse applications and the outlook of SCI are also discussed.

eess.IV↗

arXiv2021

SkinScan: Low-Cost 3D-Scanning for Dermatologic Diagnosis and Documentation

The utilization of computational photography becomes increasingly essential in the medical field. Today, imaging techniques for dermatology range from two-dimensional (2D) color imagery with a mobile device to professional clinical imaging systems measuring additional detailed three-dimensional (3D) data. The latter are commonly expensive and not accessible to a broad audience. In this work, we propose a novel system and software framework that relies only on low-cost (and even mobile) commodity devices present in every household to measure detailed 3D information of the human skin with a 3D-gradient-illumination-based method. We believe that our system has great potential for early-stage diagnosis and monitoring of skin diseases, especially in vastly populated or underdeveloped areas.

eess.IV↗

arXiv2020

E3D: Event-Based 3D Shape Reconstruction

3D shape reconstruction is a primary component of augmented/virtual reality. Despite being highly advanced, existing solutions based on RGB, RGB-D and Lidar sensors are power and data intensive, which introduces challenges for deployment in edge devices. We approach 3D reconstruction with an event camera, a sensor with significantly lower power, latency and data expense while enabling high dynamic range. While previous event-based 3D reconstruction methods are primarily based on stereo vision, we cast the problem as multi-view shape from silhouette using a monocular event camera. The output from a moving event camera is a sparse point set of space-time gradients, largely sketching scene/object edges and contours. We first introduce an event-to-silhouette (E2S) neural network module to transform a stack of event frames to the corresponding silhouettes, with additional neural branches for camera pose regression. Second, we introduce E3D, which employs a 3D differentiable renderer (PyTorch3D) to enforce cross-view 3D mesh consistency and fine-tune the E2S and pose network. Lastly, we introduce a 3D-to-events simulation pipeline and apply it to publicly available object datasets and generate synthetic event/silhouette training pairs for supervised learning.

cs.CV↗

arXiv2020

2-Step Sparse-View CT Reconstruction with a Domain-Specific Perceptual Network

Computed tomography is widely used to examine internal structures in a non-destructive manner. To obtain high-quality reconstructions, one typically has to acquire a densely sampled trajectory to avoid angular undersampling. However, many scenarios require a sparse-view measurement leading to streak-artifacts if unaccounted for. Current methods do not make full use of the domain-specific information, and hence fail to provide reliable reconstructions for highly undersampled data. We present a novel framework for sparse-view tomography by decoupling the reconstruction into two steps: First, we overcome its ill-posedness using a super-resolution network, SIN, trained on the sparse projections. The intermediate result allows for a closed-form tomographic reconstruction with preserved details and highly reduced streak-artifacts. Second, a refinement network, PRN, trained on the reconstructions reduces any remaining artifacts. We further propose a light-weight variant of the perceptual-loss that enhances domain-specific information, boosting restoration accuracy. Our experiments demonstrate an improvement over current solutions by 4 dB.

eess.IV↗

arXiv2020

Interpretation of Brain Morphology in Association to Alzheimer's Disease Dementia Classification Using Graph Convolutional Networks on Triangulated Meshes

We propose a mesh-based technique to aid in the classification of Alzheimer's disease dementia (ADD) using mesh representations of the cortex and subcortical structures. Deep learning methods for classification tasks that utilize structural neuroimaging often require extensive learning parameters to optimize. Frequently, these approaches for automated medical diagnosis also lack visual interpretability for areas in the brain involved in making a diagnosis. This work: (a) analyzes brain shape using surface information of the cortex and subcortical structures, (b) proposes a residual learning framework for state-of-the-art graph convolutional networks which offer a significant reduction in learnable parameters, and (c) offers visual interpretability of the network via class-specific gradient information that localizes important regions of interest in our inputs. With our proposed method leveraging the use of cortical and subcortical surface information, we outperform other machine learning methods with a 96.35% testing accuracy for the ADD vs. healthy control problem. We confirm the validity of our model by observing its performance in a 25-trial Monte Carlo cross-validation. The generated visualization maps in our study show correspondences with current knowledge regarding the structural localization of pathological changes in the brain associated to dementia of the Alzheimer's type.

eess.IV↗

arXiv2020

Self-supervised Fine-tuning for Correcting Super-Resolution Convolutional Neural Networks

While Convolutional Neural Networks (CNNs) trained for image and video super-resolution (SR) regularly achieve new state-of-the-art performance, they also suffer from significant drawbacks. One of their limitations is their lack of robustness to unseen image formation models during training. Other limitations include the generation of artifacts and hallucinated content when training Generative Adversarial Networks (GANs) for SR. While the Deep Learning literature focuses on presenting new training schemes and settings to resolve these various issues, we show that one can avoid training and correct for SR results with a fully self-supervised fine-tuning approach. More specifically, at test time, given an image and its known image formation model, we fine-tune the parameters of the trained network and iteratively update them using a data fidelity loss. We apply our fine-tuning algorithm on multiple image and video SR CNNs and show that it can successfully correct for a sub-optimal SR solution by entirely relying on internal learning at test time. We apply our method on the problem of fine-tuning for unseen image formation models and on removal of artifacts introduced by GANs.

eess.IV↗

arXiv2020

Examining the Benefits of Capsule Neural Networks

Capsule networks are a recently developed class of neural networks that potentially address some of the deficiencies with traditional convolutional neural networks. By replacing the standard scalar activations with vectors, and by connecting the artificial neurons in a new way, capsule networks aim to be the next great development for computer vision applications. However, in order to determine whether these networks truly operate differently than traditional networks, one must look at the differences in the capsule features. To this end, we perform several analyses with the purpose of elucidating capsule features and determining whether they perform as described in the initial publication. First, we perform a deep visualization analysis to visually compare capsule features and convolutional neural network features. Then, we look at the ability for capsule features to encode information across the vector components and address what changes in the capsule architecture provides the most benefit. Finally, we look at how well the capsule features are able to encode instantiation parameters of class objects via visual transformations.

cs.LG↗

arXiv2019

Adaptive Image Sampling using Deep Learning and its Application on X-Ray Fluorescence Image Reconstruction

This paper presents an adaptive image sampling algorithm based on Deep Learning (DL). The adaptive sampling mask generation network is jointly trained with an image inpainting network. The sampling rate is controlled in the mask generation network, and a binarization strategy is investigated to make the sampling mask binary. Besides the image sampling and reconstruction application, we show that the proposed adaptive sampling algorithm is able to speed up raster scan processes such as the X-Ray fluorescence (XRF) image scanning process. Recently XRF laboratory-based systems have evolved to lightweight and portable instruments thanks to technological advancements in both X-Ray generation and detection. However, the scanning time of an XRF image is usually long due to the long exposures requires (e.g., $100 μs-1ms$ per point). We propose an XRF image inpainting approach to address the issue of long scanning time, thus speeding up the scanning process while still maintaining the possibility to reconstruct a high quality XRF image. The proposed adaptive image sampling algorithm is applied to the RGB image of the scanning target to generate the sampling mask. The XRF scanner is then driven according to the sampling mask to scan a subset of the total image pixels. Finally, we inpaint the scanned XRF image by fusing the RGB image to reconstruct the full scan XRF image. The experiments show that the proposed adaptive sampling algorithm is able to effectively sample the image and achieve a better reconstruction accuracy than that of the existing methods.

cs.CV↗

arXiv2019

Scalable Variational Gaussian Processes for Crowdsourcing: Glitch Detection in LIGO

In the last years, crowdsourcing is transforming the way classification training sets are obtained. Instead of relying on a single expert annotator, crowdsourcing shares the labelling effort among a large number of collaborators. For instance, this is being applied to the data acquired by the laureate Laser Interferometer Gravitational Waves Observatory (LIGO), in order to detect glitches which might hinder the identification of true gravitational-waves. The crowdsourcing scenario poses new challenging difficulties, as it deals with different opinions from a heterogeneous group of annotators with unknown degrees of expertise. Probabilistic methods, such as Gaussian Processes (GP), have proven successful in modeling this setting. However, GPs do not scale well to large data sets, which hampers their broad adoption in real practice (in particular at LIGO). This has led to the recent introduction of deep learning based crowdsourcing methods, which have become the state-of-the-art. However, the accurate uncertainty quantification of GPs has been partially sacrificed. This is an important aspect for astrophysicists in LIGO, since a glitch detection system should provide very accurate probability distributions of its predictions. In this work, we leverage the most popular sparse GP approximation to develop a novel GP based crowdsourcing method that factorizes into mini-batches. This makes it able to cope with previously-prohibitive data sets. The approach, which we refer to as Scalable Variational Gaussian Processes for Crowdsourcing (SVGPCR), brings back GP-based methods to the state-of-the-art, and excels at uncertainty quantification. SVGPCR is shown to outperform deep learning based methods and previous probabilistic approaches when applied to the LIGO data. Moreover, its behavior and main properties are carefully analyzed in a controlled experiment based on the MNIST data set.

cs.LG↗

arXiv2019

Automated Polysomnography Analysis for Detection of Non-Apneic and Non-Hypopneic Arousals using Feature Engineering and a Bidirectional LSTM Network

Objective: The aim of this study is to develop an automated classification algorithm for polysomnography (PSG) recordings to detect non-apneic and non-hypopneic arousals. Our particular focus is on detecting the respiratory effort-related arousals (RERAs) which are very subtle respiratory events that do not meet the criteria for apnea or hypopnea, and are more challenging to detect. Methods: The proposed algorithm is based on a bidirectional long short-term memory (BiLSTM) classifier and 465 multi-domain features, extracted from multimodal clinical time series. The features consist of a set of physiology-inspired features (n = 75), obtained by multiple steps of feature selection and expert analysis, and a set of physiology-agnostic features (n = 390), derived from scattering transform. Results: The proposed algorithm is validated on the 2018 PhysioNet challenge dataset. The overall performance in terms of the area under the precision-recall curve (AUPRC) is 0.50 on the hidden test dataset. This result is tied for the second-best score during the follow-up and official phases of the 2018 PhysioNet challenge. Conclusions: The results demonstrate that it is possible to automatically detect subtle non-apneic/non-hypopneic arousal events from PSG recordings. Significance: Automatic detection of subtle respiratory events such as RERAs together with other non-apneic/non-hypopneic arousals will allow detailed annotations of large PSG databases. This contributes to a better retrospective analysis of sleep data, which may also improve the quality of treatment.

eess.SP↗