arXiv subjects

Agustin Schiffrin

Publications and source records attributed to Agustin Schiffrin.

13 recordsLinked to original sources

arXiv2025

Atomic-scale control of substrate-spin coupling via vertical manipulation of a 2D metal-organic framework

Two-dimensional (2D) materials with frustrated crystal geometries can host strongly correlated electrons, potentially leading to a range of exotic many-body quantum phases such as Mott insulators, quantum spin-liquids, and Kondo lattices. The ability to control exchange-coupling within these systems is therefore highly desirable. Here, we use an atomically sharp scanning tunneling microscope probe to vertically manipulate a 2D Mott insulating kagome metal-organic framework (MOF) featuring Kondo-screened local magnetic moments on Ag(111). We show that by controlling the adsorption height of the MOF, we can also controllably and reversibly change the strength of Kondo coupling between the MOF's local spins and the substrate's conduction electrons. This mechanical control of Kondo coupling could be extended to other forms of interlayer exchange coupling, potentially allowing for atomic-scale design or control of spintronics technologies.

cond-mat.str-el↗

arXiv2024

Robust Room-Temperature Polariton Condensation and Lasing in Scalable FAPbBr$_3$ Perovskite Microcavities

Exciton-polariton condensation in direct bandgap semiconductors strongly coupled to light enables a broad range of fundamental studies and applications like low-threshold and electrically driven lasing. Yet, materials hosting exciton-polariton condensation in ambient conditions are rare, with fabrication protocols that are often inefficient and non-scalable. Here, room-temperature exciton-polariton condensation and lasing is observed in a microcavity with embedded formamidiniumlead bromide (FAPbBr$_3$) perovskite film. This optically active material is spin-coated onto the microcavity mirror, which makes the whole device scalable up to large lateral sizes. The sub-$μ$m granulation of the polycrystalline FAPbBr$_3$ film allows for observation of polariton lasing in a single quantum-confined mode of a polaritonic 'quantum dot'. Compared to random photon lasing, observed in bare FAPbBr$_3$ films, polariton lasing exhibits a lower threshold, narrower linewidth, and an order of magnitude longer coherence time. Both polariton and random photon lasing are observed under the conditions of pulsed optical pumping, and persist without significant degradation for up to 6 and 17 hours of a continuous experimental run, respectively. This study demonstrates the excellent potential of the FAPbBr$_3$ perovskite as a new material for room-temperature polaritonics, with the added value of efficient and scalable fabrication offered by the solution-based spin-coating process.

cond-mat.mes-hall↗

arXiv2024

Upper Bound Estimate of the Electronic Scattering Potential of a Weakly Interacting Molecular Film on a Metal

Thin organic films and two-dimensional (2D) molecular assemblies on solid surfaces yield the potential for applications in molecular electronics, optoelectronics, catalysis, and sensing. These applications rely on the intrinsic electronic properties of the hybrid organic/inorganic interface. Here, we investigate the energy dispersion of 2D electronic states at the interface between an atomically thin self-assembled molecular film, comprised of flat, noncovalently bonded 9,10-dicyanoanthracene (DCA) molecules, and a Ag(111) surface. Using Fourier-transformed scanning tunnelling spectroscopy (FT-STS), we determined that the 2D electronic wave functions with wavevectors within ~80% of the first Brillouin zone (BZ) area close to the Gamma-point are free-electron-like, suggesting a weak electronic interaction between the 2D molecular film and the metal surface. Via a perturbative second-order correction to the free electron energy dispersion, we further established an upper bound for the amplitude of the scattering potential resulting from the self-assembled molecular film that the interface electrons are subject to, on the order of 1.5 eV. Our approach allows for quantifying electronic interactions at hybrid 2D interfaces and heterostructures.

cond-mat.mtrl-sci↗

arXiv2024

Electric Field Control of Molecular Charge State in a Single-Component 2D Organic Nanoarray

Quantum dots (QD) with electric-field-controlled charge state are promising for electronics applications, e.g., digital information storage, single-electron transistors and quantum computing. Inorganic QDs consisting of semiconductor nanostructures or heterostructures often offer limited control on size and composition distribution, as well as low potential for scalability and/or nanoscale miniaturization. Owing to their tunability and self-assembly capability, using organic molecules as building nano-units can allow for bottom-up synthesis of two-dimensional (2D) nanoarrays of QDs. However, 2D molecular self-assembly protocols are often applicable on metals surfaces, where electronic hybridization and Fermi level pinning can hinder electric-field control of the QD charge state. Here, we demonstrate the synthesis of a single-component self-assembled 2D array of molecules [9, 10-dicyanoanthracene (DCA)] that exhibit electric-field-controlled spatially periodic charging on a noble metal surface, Ag(111). The charge state of DCA can be altered (between neutral and negative), depending on its adsorption site, by the local electric field induced by a scanning tunneling microscope tip. Limited metal-molecule interactions result in an effective tunneling barrier between DCA and Ag(111) that enables electric-field-induced electron population of the lowest unoccupied molecular orbital (LUMO) and hence charging of the molecule. Subtle site-dependent variation of the molecular adsorption height translates into a significant spatial modulation of the molecular polarizability, dielectric constant and LUMO energy level alignment, giving rise to a spatially dependent effective molecule-surface tunneling barrier and likelihood of charging. This work offers potential for high-density 2D self-assembled nanoarrays of identical QDs whose charge states can be addressed individually with an electric field.

cond-mat.mtrl-sci↗

arXiv2024

Local gate control of Mott metal-insulator transition in a 2D metal-organic framework

Electron-electron interactions in materials lead to exotic many-body quantum phenomena including Mott metal-insulator transitions (MITs), magnetism, quantum spin liquids, and superconductivity. These phases depend on electronic band occupation and can be controlled via the chemical potential. Flat bands in two-dimensional (2D) and layered materials with a kagome lattice enhance electronic correlations. Although theoretically predicted, correlated-electron Mott insulating phases in monolayer 2D metal-organic frameworks (MOFs) with a kagome structure have not yet been realised experimentally. Here, we synthesise a 2D kagome MOF on a 2D insulator. Scanning tunnelling microscopy (STM) and spectroscopy reveal a MOF electronic energy gap of ~200 meV, consistent with dynamical mean field theory predictions of a Mott insulator. Combining template-induced (via work function variations of the substrate) and STM probe-induced gating, we locally tune the electron population of the MOF kagome bands and induce Mott MITs. These findings enable technologies based on electrostatic control of many-body quantum phases in 2D MOFs.

cond-mat.str-el↗

arXiv2023

Non-Drude THz conductivity of graphene due to structural distortions

The remarkable electrical, optical and mechanical properties of graphene make it a desirable material for electronics, optoelectronics and quantum applications. A fundamental understanding of the electrical conductivity of graphene across a wide frequency range is required for the development of such technologies. In this study, we use terahertz (THz) time-domain spectroscopy to measure the complex dynamic conductivity of electrostatically gated graphene, in a broad $\sim$0.1 - 7 THz frequency range. The conductivity of doped graphene follows the conventional Drude model, and is predominantly governed by intraband processes. In contrast, undoped charge-neutral graphene exhibits a THz conductivity that significantly deviates from Drude-type models. Via quantum kinetic equations and density matrix theory, we show that this discrepancy can be explained by additional interband processes, that can be exacerbated by electron backscattering. We propose a mechanism where such backscattering -- which involves flipping of the electron pseudo-spin -- is mediated by the substantial vector scattering potentials that are associated with structural deformations of graphene. Our findings highlight the significant impact that structural distortions and resulting electrostatic vector scattering potentials can have on the THz conductivity of charge-neutral graphene. Our results emphasise the importance of the planar morphology of graphene for its broadband THz electronic response.

cond-mat.mtrl-sci↗

arXiv2023

Selective Activation of Aromatic C-H Bonds Catalyzed by Single Gold Atoms at Room Temperature

Selective activation and controlled functionalization of C-H bonds in organic molecules is one of the most desirable processes in synthetic chemistry. Despite progress in heterogeneous catalysis using metal surfaces, this goal remains challenging due to the stability of C-H bonds and their ubiquity in precursor molecules, hampering regioselectivity. Here, we examine the interaction between 9,10-dicyanoanthracene (DCA) molecules and Au adatoms on a Ag(111) surface at room temperature (RT). Characterization via low-temperature scanning tunneling microscopy, spectroscopy, and noncontact atomic force microscopy, supported by theoretical calculations, revealed the formation of organometallic DCA-Au-DCA dimers, where C atoms at the ends of the anthracene moieties are bonded covalently to single Au atoms. The formation of this organometallic compound is initiated by a regioselective cleaving of C-H bonds at RT. Hybrid quantum mechanics/molecular mechanics calculations show that this regioselective C-H bond cleaving is enabled by an intermediate metal-organic complex which significantly reduces the dissociation barrier of a specific C-H bond. Harnessing the catalytic activity of single metal atoms, this regioselective on-surface C-H activation reaction at RT offers promising routes for future synthesis of functional organic and organometallic materials.

physics.chem-ph↗

arXiv2023

Designing optoelectronic properties by on-surface synthesis: formation and electronic structure of an iron-terpyridine macromolecular complex

Supramolecular chemistry protocols applied on surfaces offer compelling avenues for atomic scale control over organic-inorganic interface structures. In this approach, adsorbate-surface interactions and two-dimensional confinement can lead to morphologies and properties that differ dramatically from those achieved via conventional synthetic approaches. Here, we describe the bottom-up, on-surface synthesis of one-dimensional coordination nanostructures based on an iron (Fe)-terpyridine (tpy) interaction borrowed from functional metal-organic complexes used in photovoltaic and catalytic applications. Thermally activated diffusion of sequentially deposited ligands and metal atoms, and intra-ligand conformational changes, lead to Fe-tpy coordination and formation of these nanochains. Low-temperature Scanning Tunneling Microscopy and Density Functional Theory were used to elucidate the atomic-scale morphology of the system, providing evidence of a linear tri-Fe linkage between facing, coplanar tpy groups. Scanning Tunneling Spectroscopy reveals highest occupied orbitals with dominant contributions from states located at the Fe node, and ligand states that mostly contribute to the lowest unoccupied orbitals. This electronic structure yields potential for hosting photo-induced metal-to-ligand charge transfer in the visible/near-infrared. The formation of this unusual tpy/tri-Fe/tpy coordination motif has not been observed for wet chemistry synthesis methods, and is mediated by the bottom-up on-surface approach used here.

cond-mat.mtrl-sci↗

arXiv2022

Correlation-induced magnetism in substrate-supported 2D metal-organic frameworks

Two-dimensional (2D) metal-organic frameworks (MOFs) in a kagome lattice can exhibit strong electron-electron interactions, which can lead to tunable quantum phases including many exotic magnetic phases. While technological developments of 2D MOFs typically take advantage of substrates for growth, support, and electrical contacts, investigations often ignore substrates and their dramatic influence on electronic properties of MOFs. Here, we show how substrates alter the correlated magnetic phases in kagome MOFs using systematic density functional theory and mean-field Hubbard calculations. We demonstrate that MOF-substrate coupling, MOF-substrate charge transfer, strain, and external electric fields are key variables, activating and deactivating magnetic phases in these materials. While we consider the example of kagome-arranged 9,10-dicyanoanthracene molecules coordinated with copper atoms, our findings should generalise to any kagome lattice. This work offers useful predictions for tunable interaction-induced magnetism in surface-supported 2D organic materials, opening the door to solid-state electronic and spintronic technologies based on such systems.

cond-mat.str-el↗

arXiv2021

Manifestation of strongly correlated electrons in a 2D kagome metal-organic framework

The kagome lattice, whose electronic valence band (VB) structure includes two Dirac bands and one flat band, offers a rich space to realise tuneable topological and strongly correlated electronic phases in two-dimensional (2D) and layered materials. While strong electron correlations have been observed in inorganic kagome crystals, they remain elusive in organic systems. The latter offer versatile synthesis protocols via molecular self-assembly and metal-ligand coordination. Here, we report the synthesis of a 2D metal-organic framework (MOF) where di-cyano-anthracene (DCA) molecules form a kagome arrangement via coordination with copper (Cu) atoms on a silver surface [Ag(111)]. Low-temperature scanning tunnelling spectroscopy revealed Kondo screening--by the Ag(111) conduction electrons--of magnetic moments localised at Cu and DCA sites of the MOF. Density functional theory and mean-field Hubbard modelling show that these local moments emerge from strong interactions between kagome MOF electrons, enabling organic 2D materials as viable platforms for strongly correlated nanoelectronics and spintronics.

cond-mat.str-el↗

arXiv2020

Long-Range Surface-Assisted Molecule-Molecule Hybridization

Metalated phthalocyanines (Pc's) are robust and versatile molecular complexes, whose properties can be tuned by changing their functional groups and central metal atom. The electronic structure of magnesium Pc (MgPc) - structurally and electronically similar to chlorophyll - adsorbed on the Ag(100) surface is investigated by low-temperature scanning tunneling microscopy (STM) and spectroscopy (STS), non-contact atomic force microscopy (ncAFM) and density functional theory (DFT). Single, isolated MgPc's exhibit a flat, four-fold rotationally symmetric morphology, with doubly degenerate, partially populated (due to surface-to-molecule electron transfer) lowest unoccupied molecular orbitals (LUMOs). In contrast, MgPc's with neighbouring molecules in proximity undergo a lift of LUMOs degeneracy, with a near-Fermi local density of states with reduced two-fold rotational symmetry, indicative of a long-range attractive intermolecular interaction. The latter is assigned to a surface-mediated two-step electronic hybridization process. First, LUMOs interact with Ag(100) conduction electrons, forming hybrid molecule-surface orbitals with enhanced spatial extension. Then, these delocalized molecule-surface states further hybridize with those of neighbouring molecules. This work highlights how the electronic structure of molecular adsorbates - including orbital degeneracies and symmetries - can be significantly altered via surface-mediated intermolecular hybridization, over extended distances (beyond 3 nm), having important implications for prospects of molecule-based solid-state technologies.

cond-mat.mtrl-sci↗

arXiv2018

Iron-based trinuclear metal-organic nanostructures on a surface with local charge accumulation

Coordination chemistry relies on harnessing active metal sites within organic matrices. Polynuclear complexes - consisting of organic ligands binding to clusters of several metal atoms are of particular interest, owing to their electronic/magnetic properties and potential for functional reactivity pathways. However, their synthesis remains challenging; only a limited number of geometries and configurations have been achieved. Here, we synthesise - via supramolecular chemistry on a noble metal surface - one-dimensional metal-organic nanostructures composed of terpyridine (tpy)-based molecules coordinated with well-defined polynuclear iron clusters. By a combination of low-temperature scanning probe microscopy techniques and density functional theory, we demonstrate that the coordination motif consists of coplanar tpy's linked via a linear tri-iron node in a mixed (positive) valence, metal-metal bond configuration. This unusual linkage is stabilized by a local accumulation of electrons at the interface between cations, ligand and surface. The latter, enabled by the bottom-up on-surface synthesis, hints at a chemically active metal centre, and opens the door to the engineering of nanomaterials with novel catalytic and magnetic functionalities.

cond-mat.mes-hall↗

arXiv2016

Sub-cycle optical control of current in a semiconductor: from the multiphoton to the tunneling regime

Nonlinear interactions between ultrashort optical waveforms and solids can be used to induce and steer electric current on a femtosecond (fs) timescale, holding promise for electronic signal processing at PHz frequencies [Nature 493, 70 (2013)]. So far, this approach has been limited to insulators, requiring extremely strong peak electric fields and intensities. Here, we show all-optical generation and control of directly measurable electric current in a semiconductor relevant for high-speed and high-power (opto)electronics, gallium nitride (GaN), within an optical cycle and on a timescale shorter than 2 fs, at intensities at least an order of magnitude lower than those required for dielectrics. Our approach opens the door to PHz electronics and metrology, applicable to low-power (non-amplified) laser pulses, and may lead to future applications in semiconductor and photonic integrated circuit technologies.

cond-mat.mes-hall↗