arXiv subjects

Ahmad Adnan Qidan

Publications and source records attributed to Ahmad Adnan Qidan.

33 records · Page 2Linked to original sources

arXiv2023

Rate Splitting for 6G Optical Wireless Networks

This paper evaluates the performance of rate splitting (RS), a robust interference management scheme, in an optical wireless communication (OWC) network that uses infrared lasers referred to as vertical-cavity surface-emitting lasers (VCSELs) as optical transmitters. In 6G OWC, providing high spectral and energy efficiency requires advanced multiple access schemes that can serve multiple users simultaneously in a non-orthogonal fashion. In this context, RS has the potential to manage multi-user interference at high data rates compared to orthogonal transmission schemes. Simulation results show the high performance of RS compared to baseline approaches.

eess.SP↗

arXiv2023

Resource Allocation in IRS-aided Optical Wireless Communication Systems

One of the main challenges facing optical wireless communication (OWC) systems is service disconnection in high blockage probability scenarios where users might lose the line of sight (LoS) connection with their corresponding access points (APs). In this work, we study the deployment of passive reflecting surfaces referred to as Intelligent Reflecting Surfaces (IRSs) in indoor visible light communication (VLC) to boost users signal to noise ratio (SNR) and ensure service continuity. We formulate an optimization problem to allocate APs and the mirrors of IRSs to users such that the sum rate is increased. The results show a 35% increase in the sum rate of the IRS-aided OWC system compared to the sum rate achieved by only considering the LoS channel components. The results also shows that the deployment of IRSs improves the sum rate under LoS blockage.

eess.SY↗

arXiv2023

Cooperative Artificial Neural Networks for Rate-Maximization in Optical Wireless Networks

Recently, Optical wireless communication (OWC) have been considered as a key element in the next generation of wireless communications due to its potential in supporting unprecedented communication speeds. In this paper, infrared lasers referred to as vertical-cavity surface-emitting lasers (VCSELs) are used as transmitters sending information to multiple users. In OWC, rate-maximization optimization problems are usually complex due to the high number of optical access points (APs) needed to ensure coverage. Therefore, practical solutions with low computational time are essential to cope with frequent updates in user-requirements that might occur. In this context, we formulate an optimization problem to determine the optimal user association and resource allocation in the network, while the serving time is partitioned into a series of time periods. Therefore, cooperative ANN models are designed to estimate and predict the association and resource allocation variables for each user such that sub-optimal solutions can be obtained within a certain period of time prior to its actual starting, which makes the solutions valid and in accordance with the demands of the users at a given time. The results show the effectiveness of the proposed model in maximizing the sum rate of the network compared with counterpart models. Moreover, ANN-based solutions are close to the optimal ones with low computational time.

eess.SY↗

arXiv2022

Multi-User Rate Splitting in Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. Laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require clusters of optical transmitters to provide uniform coverage for multiple users. In this context, multi-user interference (MUI) is a crucial issue that must be managed efficiently to provide high spectral efficiency. Rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously by splitting the message of a given user into common and private messages, and then, each user decodes the desired message following a certain procedure. In radio frequency (RF) networks, RS provides higher spectral efficiency compared with orthogonal and non-orthogonal transmission schemes. Considering the high density of OWC networks, the performance of RS is limited by the cost of providing channel state information (CSI) at transmitters and by the noise resulting from interference cancellation. In this work, a user-grouping algorithm is proposed and used to form multiple groups, each group contains users spatially clustered. Then, an outer precoder is designed to manage inter-group interference following the methodology of blind interference alignment (BIA), which reduces the requirements of CSI at RF or optical transmitters. For intra-group interference, RS is applied within each group where the users belonging to a given group receive a unique common message on which their private messages are superimposed. Furthermore, an optimization problem is formulated to allocate the power among the private messages intended to all users such that the sum rate of the network is maximized.

eess.SP↗

arXiv2022

Terabit Indoor Laser-Based Wireless Communications: LiFi 2.0 for 6G

This paper provides a summary of available technologies required for implementing indoor laser-based wireless networks capable of achieving aggregate data-rates of terabits per second as widely accepted as a sixth generation (6G) key performance indicator. The main focus of this paper is on the technologies supporting the near infrared region of the optical spectrum. The main challenges in the design of the transmitter and receiver systems and communication/networking schemes are identified and new insights are provided. This paper also covers the previous and recent standards as well as industrial applications for optical wireless communications (OWC) and LiFi.

cs.IT↗

arXiv2022

On the energy efficiency of Laser-based Optical Wireless Networks

Optical wireless Communication (OWC) is a strong candidate in the next generation (6G) of cellular networks. In this paper, a laser-based optical wireless network is deployed in an indoor environment using Vertical Cavity Surface Emitting Lasers (VCSELS) as transmitters serving multiple users. Specifically, a commercially available low-cost VCSEL operating at 850nm wavelength is used. Considering the confined coverage area of each VCSEL, an array of VCSELs is designed to transmit data to multiple users through narrow beams taking into account eye safety regulations. To manage multi-user interference (MUI), Zero Forcing (ZF) is implemented to maximize the multiplexing gain of the network. The energy efficiency of the network is studied under different laser beam waists to find the effective laser beam size that results in throughput enhancement. The results show that the energy efficiency increases with the laser beam waist. Moreover, using micro lenses placed in front of the VCSELs leads to significant increase in the energy efficiency.

eess.SP↗

arXiv2022

Random Linear Network Coding in NOMA Optical Wireless Networks

Optical wireless communication (OWC) has the potential to provide high communication speeds that support the massive use of the Internet that is expected in the near future. In OWC, optical access points (APs) are deployed on the celling to serve multiple users. In this context, efficient multiple access schemes are required to share the resources among the users and align multi-user interference. Recently, non-orthogonal multiple access (NOMA) has been studied to serve multiple users simultaneously using the same resources, while a different power level is allocated to each user. Despite the acceptable performance of NOMA, users might experience a high packet loss due to high noise, which results from the use of successive interference cancelation (SIC). In this work, random linear network coding (RLNC) is proposed to enhance the performance of NOMA in an optical wireless network where users are divided into multicast groups, and each group contains users that slightly differ in their channel gains. Moreover, a fixed power allocation (FPA) strategy is considered among these groups to avoid complexity. The performance of the proposed scheme is evaluated in terms of total packet success probability. The results show that the proposed scheme is more suitable for the network considered compared to other benchmark schemes such as traditional NOMA and orthogonal transmission schemes. Moreover, the total packet success probability is highly affected by the level of power allocated to each group in all the scenarios.

cs.IT↗

arXiv2021

Towards Terabit LiFi Networking

Light Fidelity (Li-Fi) is a networked version of optical wireless communication (OWC), which is a strong candidate to fulfill the unprecedented increase in user-traffic expected in the near future. In OWC, a high number of optical access points (APs) is usually deployed on the ceiling of an indoor environment to serve multiple users with different demands. Despite the high data rates of OWC networks, due to the use of the optical band for data transmission, they cannot replace current radio frequency (RF) wireless networks where OWC has several issues including the small converge area of an optical AP, the lack of uplink transmission and high blockage probabilities. However, OWC has the potential to support the requirements in the next generation (6G) of wireless communications. In this context, heterogeneous optical/RF networks can be considered to overcome the limitations of OWC and RF systems, while providing a high quality of service in terms of achievable data rates and coverage. In this work, infrared lasers, vertical-cavity surface-emitting(VCSEL) lasers, are used as the key elements of optical APs for serving multiple users. Then, transmission schemes such as zero forcing (ZF) and blind interference alignment (BIA) are introduced to manage multi-user interference and maximize the sum rate of users. Moreover, a WiFi system is considered to provide uplink transmission and serve users that experience a low signal to noise ratio (SNR) from the optical system. To use the resources of the heterogeneous optical/RF network efficiently, we derive a utility-based objective function that aims to maximize the overall sum rate of the network.

eess.SP↗

arXiv2021

Artificial Neural Network for Resource Allocation in Laser-based Optical wireless Networks

Optical wireless communication offers unprecedented communication speeds that can support the massive use of the Internet on a daily basis. In indoor environments, optical wireless networks are usually multi-user multiple-input multiple-output (MU-MIMO) systems, where a high number of optical access points (APs) is required to ensure coverage. In this work, a laser-based optical wireless network is considered for serving multiple users. Moreover, blind inference alignment (BIA) is implemented to achieve a high degree of freedom (DoF) without the need for channel state information (CSI) at transmitters, which is difficult to provide in such wireless networks. Then, an objective function is defined to allocate the resources of the network taking into consideration the requirements of users and the available resources. This optimization problem can be solved through exhaustive search or distributed algorithms. However, a practical algorithm that provides immediate solutions in real time scenarios is required. In this context, an artificial neural network (ANN) model is derived in order to obtain a sub-optimal solution with low computational time. The implementation of the ANN model involves three important steps, dataset generation, offline training, and real time application. The results show that the trained ANN model provides a significant solution close to the optimal one.

eess.SP↗

arXiv2021

Resource Allocation in Laser-based Optical Wireless Cellular Networks

Optical wireless communication provides data transmission at high speeds which can satisfy the increasing demands for connecting a massive number of devices to the Internet. In this paper, vertical-cavity surface-emitting(VCSEL) lasers are used as transmitters due to their high modulation speed and energy efficiency. However, a high number of VCSEL lasers is required to ensure coverage where each laser source illuminates a confined area. Therefore, multiple users are classified into different sets according to their connectivity. Given this point, a transmission scheme that uses blind interference alignment (BIA) is implemented to manage the interference in the laser-based network. In addition, an optimization problem is formulated to maximize the utility sum rate taking into consideration the classification of the users. To solve this problem, a decentralized algorithm is proposed where the main problem is divided into sub-problems, each can be solved independently avoiding complexity. The results demonstrate the optimality of the decentralized algorithm where a sub-optimal solution is provided. Finally, it is shown that BIA can provide high performance in laser-based networks compared with zero forcing (ZF) transmit precoding scheme.

eess.SP↗

arXiv2021

On Optimizing Rate Splitting in Laser-based Optical Wireless Networks

Optical wireless communication (OWC) is a promising technology that has the potential to provide Tb/s aggregate rates. In this paper, interference management is studied in a Laser-based optical wireless network where vertical-cavity surface-emitting (VCSEL) lasers are used for data transmission. In particular, rate splitting (RS) and hierarchical rate splitting (HRS) are proposed to align multi-user interference, while maximizing the multiplexing gain of the network. Basically, RS serves multiple users simultaneously by splitting a message of a user into common and private messages, each message with a certain level of power, while on the other side users decode their messages following a specific methodology. The performance of the conventional RS scheme is limited in high density wireless networks. Therefore, the HRS scheme is developed aiming to achieve high rates where users are divided into multiple groups, and a new message called outer common message is used for managing inter-group interference. We formulate an optimization problem that addresses power allocation among the messages of the HRS scheme to further enhance the performance of the network. The results show that the proposed approach provides high achievable rates compared with the conventional RS and HRS schemes in different scenarios.

cs.IT↗

arXiv2021

Blind Interference Alignment in 6G Optical Wireless Communications

In recent years, the demand for high speed wireless networking has increased considerably due to the enormous number of devices connected to the Internet. In this context, optical wireless communication (OWC) has received tremendous interest in the context of next generation wireless networks where OWC offers a huge unlicensed bandwidth using optical bands. OWC systems are directional and can naturally provide multiple-input and multiple-output (MIMO) configurations serving multiple users using a high number of transmitters in the indoor environment to ensure coverage. Therefore, multiuser interference must be managed efficiently to enhance the performance of OWC networks considering different metrics. A transmission scheme referred to as blind interference alignment (BIA) is proposed for OWC systems to maximize the multiplexing gain without the need for channel state information (CSI) at the transmitters, which is difficult to achieve in MIMO scenarios. However, standard BIA avoids the need for CSI at the cost of requiring channel coherence time large enough for transmitting the whole transmission block. Moreover, the methodology of BIA results in increased noise with increase in the number of transmitters and users. Therefore, various network topologies such as network centric (NC) and user centric (UC) designs are proposed to relax the limitations of BIA where these topologies divide the receiving area into multiple clusters. The results show a significant enhancement in the performance of topological BIA compared with standard BIA.

cs.IT↗

arXiv2021

Reinforcement Learning for Resource Allocation in Steerable Laser-based Optical Wireless Systems

Vertical Cavity Surface Emitting Lasers (VCSELs) have demonstrated suitability for data transmission in indoor optical wireless communication (OWC) systems due to the high modulation bandwidth and low manufacturing cost of these sources. Specifically, resource allocation is one of the major challenges that can affect the performance of multi-user optical wireless systems. In this paper, an optimisation problem is formulated to optimally assign each user to an optical access point (AP) composed of multiple VCSELs within a VCSEL array at a certain time to maximise the signal to interference plus noise ratio (SINR). In this context, a mixed-integer linear programming (MILP) model is introduced to solve this optimisation problem. Despite the optimality of the MILP model, it is considered impractical due to its high complexity, high memory and full system information requirements. Therefore, reinforcement Learning (RL) is considered, which recently has been widely investigated as a practical solution for various optimization problems in cellular networks due to its ability to interact with environments with no previous experience. In particular, a Q-learning (QL) algorithm is investigated to perform resource management in a steerable VCSEL-based OWC systems. The results demonstrate the ability of the QL algorithm to achieve optimal solutions close to the MILP model. Moreover, the adoption of beam steering, using holograms implemented by exploiting liquid crystal devices, results in further enhancement in the performance of the network considered.

eess.SP↗

arXiv2021

Rate Splitting in VCSEL-based Optical Wireless Networks

Optical wireless communication is an effective potential solution for enabling high speed next generation cellular networks. In this paper, laser sources, in particular, vertical-cavity surface-emitting (VCSEL) lasers are used for data transmission due to their high modulation speed compared with light emitting diode (LED) sources. To manage multi-user interference, rate splitting (RS) is implemented where the message of a user is split into common and private parts. However, the performance of RS is limited in high density networks. Therefore, hierarchical rate splitting (HRS) particularly suited in high density networks is considered. The results demonstrate the high data rate achieved by using VCSELs. Moreover, HRS is more suitable for achieving high performance in optical networks compared with RS.

eess.SP↗

arXiv2021

Q-learning algorithm for resource allocation in WDMA-based optical wireless communication networks

Visible Light Communication (VLC) has been widely investigated during the last decade due to its ability to provide high data rates with low power consumption. In general, resource management is an important issue in cellular networks that can highly effect their performance. In this paper, an optimisation problem is formulated to assign each user to an optimal access point and a wavelength at a given time. This problem can be solved using mixed integer linear programming (MILP). However, using MILP is not considered a practical solution due to its complexity and memory requirements. In addition, accurate information must be provided to perform the resource allocation. Therefore, the optimisation problem is reformulated using reinforcement learning (RL), which has recently received tremendous interest due to its ability to interact with any environment without prior knowledge. In this paper, we investigate solving the resource allocation optimisation problem in VLC systems using the basic Q-learning algorithm. Two scenarios are simulated to compare the results with the previously proposed MILP model. The results demonstrate the ability of the Q-learning algorithm to provide optimal solutions close to the MILP model without prior knowledge of the system.

cs.NI↗