arXiv subjects

Ahmed Eltawil

Publications and source records attributed to Ahmed Eltawil.

12 recordsLinked to original sources

arXiv2026

EdgeCIM: A Hardware-Software Co-Design for CIM-Based Acceleration of Small Language Models

The growing demand for deploying Small Language Models (SLMs) on edge devices, including laptops, smartphones, and embedded platforms, has exposed fundamental inefficiencies in existing accelerators. While GPUs handle prefill workloads efficiently, the autoregressive decoding phase is dominated by GEMV operations that are inherently memory-bound, resulting in poor utilization and prohibitive energy costs at the edge. In this work, we present EdgeCIM, a hardware-software co-design framework that rethinks accelerator design for end-to-end decoder-only inference. At its core is a CIM macro, implemented in 65nm, coupled with a tile-based mapping strategy that balances pipeline stages, maximizing parallelism while alleviating DRAM bandwidth bottlenecks. Our simulator enables design space exploration of SLMs up to 4B parameters, identifying Pareto-optimal configurations in terms of latency and energy. Compared to an NVIDIA Orin Nano, EdgeCIM achieves up to 7.3x higher throughput and 49.59x better energy efficiency on LLaMA3.2-1B, and delivers 9.95x higher throughput than Qualcomm SA8255P on LLaMA3.2-3B. Extensive benchmarks on TinyLLaMA-1.1B, LLaMA3.2 (1B, 3B), Phi-3.5-mini-3.8B, Qwen2.5 (0.5B, 1.5B, 3B), SmolLM2-1.7B, SmolLM3-3B, and Qwen3 (0.6B, 1.7B, 4B) reveal that our accelerator, under INT4 precision, achieves on average 336.42 tokens/s and 173.02 tokens/J. These results establish EdgeCIM as a compelling solution towards real-time, energy-efficient edge-scale SLM inference.

cs.AR↗

arXiv2026

Joint Hardware-Workload Co-Optimization for In-Memory Computing Accelerators

Software-hardware co-design is essential for optimizing in-memory computing (IMC) hardware accelerators for neural networks. However, most existing optimization frameworks target a single workload, leading to highly specialized hardware designs that do not generalize well across models and applications. In contrast, practical deployment scenarios require a single IMC platform that can efficiently support multiple neural network workloads. This work presents a joint hardware-workload co-optimization framework based on an optimized evolutionary algorithm for designing generalized IMC accelerator architectures. By explicitly capturing cross-workload trade-offs rather than optimizing for a single model, the proposed approach significantly reduces the performance gap between workload-specific and generalized IMC designs. The framework is evaluated on both RRAM- and SRAM-based IMC architectures, demonstrating strong robustness and adaptability across diverse design scenarios. Compared to baseline methods, the optimized designs achieve energy-delay-area product (EDAP) reductions of up to 76.2% and 95.5% when optimizing across a small set (4 workloads) and a large set (9 workloads), respectively. The source code of the framework is available at https://github.com/OlgaKrestinskaya/JointHardwareWorkloadOptimizationIMC.

cs.AR↗

arXiv2025

CIMNAS: A Joint Framework for Compute-In-Memory-Aware Neural Architecture Search

To maximize hardware efficiency and performance accuracy in Compute-In-Memory (CIM)-based neural network accelerators for Artificial Intelligence (AI) applications, co-optimizing both software and hardware design parameters is essential. Manual tuning is impractical due to the vast number of parameters and their complex interdependencies. To effectively automate the design and optimization of CIM-based neural network accelerators, hardware-aware neural architecture search (HW-NAS) techniques can be applied. This work introduces CIMNAS, a joint model-quantization-hardware optimization framework for CIM architectures. CIMNAS simultaneously searches across software parameters, quantization policies, and a broad range of hardware parameters, incorporating device-, circuit-, and architecture-level co-optimizations. CIMNAS experiments were conducted over a search space of 9.9x10^85 potential parameter combinations with the MobileNet model as a baseline and RRAM-based CIM architecture. Evaluated on the ImageNet dataset, CIMNAS achieved a reduction in energy-delay-area product (EDAP) ranging from 90.1x to 104.5x, an improvement in TOPS/W between 4.68x and 4.82x, and an enhancement in TOPS/mm^2 from 11.3x to 12.78x relative to various baselines, all while maintaining an accuracy of 73.81%. The adaptability and robustness of CIMNAS are demonstrated by extending the framework to support the SRAM-based ResNet50 architecture, achieving up to an 819.5x reduction in EDAP. Unlike other state-of-the-art methods, CIMNAS achieves EDAP-focused optimization without any accuracy loss, generating diverse software-hardware parameter combinations for high-performance CIM-based neural network designs. The source code of CIMNAS is available at https://github.com/OlgaKrestinskaya/CIMNAS.

cs.AI↗

arXiv2025

Towards Efficient IMC Accelerator Design Through Joint Hardware-Workload Co-optimization

Designing generalized in-memory computing (IMC) hardware that efficiently supports a variety of workloads requires extensive design space exploration, which is infeasible to perform manually. Optimizing hardware individually for each workload or solely for the largest workload often fails to yield the most efficient generalized solutions. To address this, we propose a joint hardware-workload optimization framework that identifies optimised IMC chip architecture parameters, enabling more efficient, workload-flexible hardware. We show that joint optimization achieves 36%, 36%, 20%, and 69% better energy-latency-area scores for VGG16, ResNet18, AlexNet, and MobileNetV3, respectively, compared to the separate architecture parameters search optimizing for a single largest workload. Additionally, we quantify the performance trade-offs and losses of the resulting generalized IMC hardware compared to workload-specific IMC designs.

cs.AR↗

arXiv2024

SoftmAP: Software-Hardware Co-design for Integer-Only Softmax on Associative Processors

Recent research efforts focus on reducing the computational and memory overheads of Large Language Models (LLMs) to make them feasible on resource-constrained devices. Despite advancements in compression techniques, non-linear operators like Softmax and Layernorm remain bottlenecks due to their sensitivity to quantization. We propose SoftmAP, a software-hardware co-design methodology that implements an integer-only low-precision Softmax using In-Memory Compute (IMC) hardware. Our method achieves up to three orders of magnitude improvement in the energy-delay product compared to A100 and RTX3090 GPUs, making LLMs more deployable without compromising performance.

cs.AR↗

arXiv2023

Low Precision Quantization-aware Training in Spiking Neural Networks with Differentiable Quantization Function

Deep neural networks have been proven to be highly effective tools in various domains, yet their computational and memory costs restrict them from being widely deployed on portable devices. The recent rapid increase of edge computing devices has led to an active search for techniques to address the above-mentioned limitations of machine learning frameworks. The quantization of artificial neural networks (ANNs), which converts the full-precision synaptic weights into low-bit versions, emerged as one of the solutions. At the same time, spiking neural networks (SNNs) have become an attractive alternative to conventional ANNs due to their temporal information processing capability, energy efficiency, and high biological plausibility. Despite being driven by the same motivation, the simultaneous utilization of both concepts has yet to be thoroughly studied. Therefore, this work aims to bridge the gap between recent progress in quantized neural networks and SNNs. It presents an extensive study on the performance of the quantization function, represented as a linear combination of sigmoid functions, exploited in low-bit weight quantization in SNNs. The presented quantization function demonstrates the state-of-the-art performance on four popular benchmarks, CIFAR10-DVS, DVS128 Gesture, N-Caltech101, and N-MNIST, for binary networks (64.05\%, 95.45\%, 68.71\%, and 99.43\% respectively) with small accuracy drops and up to 31$\times$ memory savings, which outperforms existing methods.

cs.NE↗

arXiv2023

Thermal Heating in ReRAM Crossbar Arrays: Challenges and Solutions

The higher speed, scalability and parallelism offered by ReRAM crossbar arrays foster development of ReRAM-based next generation AI accelerators. At the same time, sensitivity of ReRAM to temperature variations decreases R_on/Roff ratio and negatively affects the achieved accuracy and reliability of the hardware. Various works on temperature-aware optimization and remapping in ReRAM crossbar arrays reported up to 58\% improvement in accuracy and 2.39$\times$ ReRAM lifetime enhancement. This paper classifies the challenges caused by thermal heat, starting from constraints in ReRAM cells' dimensions and characteristics to their placement in the architecture. In addition, it reviews available solutions designed to mitigate the impact of these challenges, including emerging temperature-resilient DNN training methods. Our work also provides a summary of the techniques and their advantages and limitations.

cs.AR↗

arXiv2021

Resistive Neural Hardware Accelerators

Deep Neural Networks (DNNs), as a subset of Machine Learning (ML) techniques, entail that real-world data can be learned and that decisions can be made in real-time. However, their wide adoption is hindered by a number of software and hardware limitations. The existing general-purpose hardware platforms used to accelerate DNNs are facing new challenges associated with the growing amount of data and are exponentially increasing the complexity of computations. An emerging non-volatile memory (NVM) devices and processing-in-memory (PIM) paradigm is creating a new hardware architecture generation with increased computing and storage capabilities. In particular, the shift towards ReRAM-based in-memory computing has great potential in the implementation of area and power efficient inference and in training large-scale neural network architectures. These can accelerate the process of the IoT-enabled AI technologies entering our daily life. In this survey, we review the state-of-the-art ReRAM-based DNN many-core accelerators, and their superiority compared to CMOS counterparts was shown. The review covers different aspects of hardware and software realization of DNN accelerators, their present limitations, and future prospectives. In particular, comparison of the accelerators shows the need for the introduction of new performance metrics and benchmarking standards. In addition, the major concerns regarding the efficient design of accelerators include a lack of accuracy in simulation tools for software and hardware co-design.

cs.AR↗

arXiv2020

Application of ICA on Self-Interference Cancellation of In-band Full Duplex Systems

In this letter, we propose a modified version of Fast Independent Component Analysis (FICA) algorithm to solve the self-interference cancellation (SIC) problem in In-band Full Duplex (IBFD) communication systems. The complex mixing problem is mathematically formulated to suit the real-valued blind source separation (BSS) algorithms. In addition, we propose a method to estimate the ambiguity factors associated with ICA lumped together with the channels and residual separation error. Experiments were performed on an FD platform where FICA-based BSS was applied for SIC in the frequency domain. Experimental results show superior performance compared to least squares SIC by up to 6 dB gain in the SNR.

eess.SP↗

arXiv2019

Error-triggered Three-Factor Learning Dynamics for Crossbar Arrays

Recent breakthroughs suggest that local, approximate gradient descent learning is compatible with Spiking Neural Networks (SNNs). Although SNNs can be scalably implemented using neuromorphic VLSI, an architecture that can learn in-situ as accurately as conventional processors is still missing. Here, we propose a subthreshold circuit architecture designed through insights obtained from machine learning and computational neuroscience that could achieve such accuracy. Using a surrogate gradient learning framework, we derive local, error-triggered learning dynamics compatible with crossbar arrays and the temporal dynamics of SNNs. The derivation reveals that circuits used for inference and training dynamics can be shared, which simplifies the circuit and suppresses the effects of fabrication mismatch. We present SPICE simulations on XFAB 180nm process, as well as large-scale simulations of the spiking neural networks on event-based benchmarks, including a gesture recognition task. Our results show that the number of updates can be reduced hundred-fold compared to the standard rule while achieving performances that are on par with the state-of-the-art.

cs.ET↗

arXiv2018

Effect of Sensor Error on the Assessment of Seismic Building Damage

Natural disasters affect structural health of buildings, thus directly impacting public safety. Continuous structural monitoring can be achieved by deploying an internet of things (IoT) network of distributed sensors in buildings to capture floor movement. These sensors can be used to compute the displacements of each floor, which can then be employed to assess building damage after a seismic event. The peak relative floor displacement is computed, which is directly related to damage level according to government standards. With this information, the building inventory can be classified into immediate occupancy (IO), life safety (LS) or collapse prevention (CP) categories. In this work, we propose a zero velocity update (ZUPT) technique to minimize displacement estimation error. Theoretical derivation and experimental validation are presented. In addition, we investigate modeling sensor error and interstory drift ratio (IDR) distribution. Moreover, we discuss the impact of sensor error on the achieved building classification accuracy.

eess.SP↗

arXiv2014

Rate Gain Region and Design Tradeoffs for Full-Duplex Wireless Communications

In this paper, we analytically study the regime in which practical full-duplex systems can achieve larger rates than an equivalent half-duplex systems. The key challenge in practical full-duplex systems is uncancelled self-interference signal, which is caused by a combination of hardware and implementation imperfections. Thus, we first present a signal model which captures the effect of significant impairments such as oscillator phase noise, low-noise amplifier noise figure, mixer noise, and analog-to-digital converter quantization noise. Using the detailed signal model, we study the rate gain region, which is defined as the region of received signal-of-interest strength where full-duplex systems outperform half-duplex systems in terms of achievable rate. The rate gain region is derived as a piece-wise linear approximation in log-domain, and numerical results show that the approximation closely matches the exact region. Our analysis shows that when phase noise dominates mixer and quantization noise, full-duplex systems can use either active analog cancellation or base-band digital cancellation to achieve near-identical rate gain regions. Finally, as a design example, we numerically investigate the full-duplex system performance and rate gain region in typical indoor environments for practical wireless applications.

cs.IT↗