arXiv subjects

Ahmed Lawey

Publications and source records attributed to Ahmed Lawey.

7 recordsLinked to original sources

arXiv2026

Analytical bounds for decoy-state quantum key distribution with discrete phase randomization

We analyze the performance of quantum key distribution (QKD) protocols that rely on discrete phase randomization (DPR). For many QKD protocols that rely on weak coherent pulses (WCPs), continuous phase randomization is assumed, which simplifies the security proofs for such protocols. However, it is challenging to achieve such a perfect phase randomization in practice. As an alternative, we can select a discrete set of global phase values for WCPs, but we need to redo the security analysis for such a source. While security proofs incorporating DPR have been established for several QKD protocols, they often rely on computationally intensive numerical optimizations. To address this issue, in this study, we derive analytical bounds on the secret key generation rate of BB84 and measurement-device-independent QKD protocols in the DPR setting. Our analytical bounds closely match the results obtained from more cumbersome numerical methods in the regions of interest.

quant-ph↗

arXiv2026

Combatting noise in near-term quantum data centres

We analyse the performance of different error handling methods in the quantum data centre paradigm of distributed quantum computing. We compare the impact of quantum error detection, using the three-qubit repetition code and the [[4, 1, 2]] Leung-Nielsen-Chuang-Yamamoto code, on remote gates with that of conventional entanglement distillation techniques. Detailed classical simulation is used to obtain results for realistic near-term hardware.

quant-ph↗

arXiv2023

Continuous Variable Quantum Key Distribution in Multiple-Input Multiple-Output Settings

We investigate quantum key distribution (QKD) in optical multiple-input-multiple-output (MIMO) settings. Such settings can prove useful in dealing with harsh channel conditions as in, e.g., satellite-based QKD. We study a $2\times2$ setting for continuous variable (CV) QKD with Gaussian encoding and heterodyne detection and reverse reconciliation. We present our key rate analysis for this system and compare it with single-mode and multiplexed CV QKD scenarios. We show that we can achieve multiplexing gain using multiple transmitters and receivers even if there is some crosstalk between the two channels. In certain cases, when there is nonzero correlated excess noise in the two received signals, we can even surpass the multiplexing gain.

quant-ph↗

arXiv2022

Latency Reduction for Mobile Edge Computing in HetNets by Uplink and Downlink Decoupled Access

Achieving an end-to-end low-latency for computations offloading, in Mobile Edge Computing (MEC) systems, is still a critical design problem. This is because the offloading of computational tasks via the MEC servers entails the use of uplink (UL) and downlink (DL) radio links that are usually assumed to be coupled to a single base station (BS). However, for heterogeneous networks, a new architectural paradigm whereby UL and DL are not associated with the same BS is proposed and seen to provide gains in network throughput due to the improved UL performance. Motivated by such gains, and by using typical results from stochastic geometry, we formulate the offloading latency for the MEC-based scheme with decoupled UL/DL association, or decoupled access, and compare its performance to the conventional coupled access scheme. Despite the backhaul delay necessary for the communication between the two serving BSs in UL and DL, the offloading scheme with decoupled access is still capable of providing a fairly lower offloading latency compared to the conventional offloading scheme with coupled access.

cs.NI↗

arXiv2019

Resilient Service Embedding In IoT Networks

The Internet of Things (IoT) has been applied to a large number of heterogeneous devices and is used in the deployment of a variety of applications on the basis of its distributed open architecture. The majority of these IoT devices are battery-powered and are interconnected via a wireless network. IoT devices may be used to carry out critical tasks. Thus, the IoT network requires a resilient architecture that supports semantic search, failure discovery, data recovery, and dynamic and autonomous network maintenance. In this paper, we present a new resilience scheme for IoT networks. We evaluate the proposed scheme in terms of its power consumption and data delivery time, and then compare the results with those of recent resilience schemes such as schemes based on redundancy and replication. The proposed framework was optimized using mixed integer linear programming and real-time heuristics were developed, thus embedding a virtual layer into a physical layer based on a service-oriented architecture (SOA). The proposed framework offers different combinations of packet resilience in terms of recovering the lost data by using end- to-end mechanisms. We further analyzed these schemes by investigating the power consumption, data delivery time, and network overhead of these techniques. The results showed that the proposed splitting technique enhanced the network performance by reducing the power consumption and the data delivery time of service embedding by selecting energy-efficient nodes and routes in IoT networks.

cs.NI↗

arXiv2019

Service Embedding in IoT Networks

The Internet of Things is anticipated to participate in the execution of a variety of complex tasks in the near future. IoT objects capable of handling multiple sensing and actuating functions are the cornerstone of smart applications such as smart buildings, smart factories, home automation, and healthcare automation. These smart applications express their demands in terms of high-level requests. These requests are characterised by the different requirements of sensing actuating functions, processing and memory needs, activation zones, latency, etc. In service-oriented architecture-based IoT, application requests are translated into a business process BP workflow. In this study, we model such a BP as a virtual network containing a set of virtual nodes and links connected in a specific topology. These virtual nodes represent the requested processing and location where sensing or actuation are needed. The virtual links capture the requested communication requirements between nodes. In this paper, we introduce a framework, optimised using mixed integer linear programming MILP, that embeds the BPs from the virtual layer into a lower-level implementation at the IoT physical layer. The proposed framework results in a physical plan that optimally allocates the processing needed and provisions the sensing and actuation at the required locations requirements to an appropriate set of IoT nodes. The optimisation goal is to minimise the IoT layer total power consumption and optimise the traffic distribution in a manner that minimises the traffic latency of each IoT node. Our results show that the proposed framework enhances the network performance by reducing the power consumption and latency.

cs.NI↗

arXiv2019

Using Machine Learning and Big Data Analytics to Prioritize Outpatients in HetNets

In this paper, we introduce machine learning approaches that are used to prioritize outpatients (OP) according to their current health state, resulting in self-optimizing heterogeneous networks (HetNet) that intelligently adapt according to users' needs. We use a naïve Bayesian classifier to analyze data acquired from OPs' medical records, alongside data from medical Internet of Things (IoT) sensors that provide the current state of the OP. We use this machine learning algorithm to calculate the likelihood of a life-threatening medical condition, in this case an imminent stroke. An OP is assigned high-powered resource blocks (RBs) according to the seriousness of their current health state, enabling them to remain connected and send their critical data to the designated medical facility with minimal delay. Using a mixed integer linear programming formulation (MILP), we present two approaches to optimizing the uplink side of a HetNet in terms of user-RB assignment: a Weighted Sum Rate Maximization (WSRMax) approach and a Proportional Fairness (PF) approach. Using these approaches, we illustrate the utility of the proposed system in terms of providing reliable connectivity to medical IoT sensors, enabling the OPs to maintain the quality and speed of their connection. Moreover, we demonstrate how system response can change according to alterations in the OPs' medical conditions.

cs.CY↗