arXiv subjects

Ahmed Zoha

Publications and source records attributed to Ahmed Zoha.

14 recordsLinked to original sources

arXiv2026

RIS-Assisted Proactive Handover for Reliable mmWave Wireless Networks

Millimeter-wave (mmWave) networks are highly susceptible to line-of-sight (LoS) blockages. Vision-aided wireless communications (VAWC) enable proactive handovers (PHO) to mitigate such blockages; however, PHO becomes challenging when no nearby base station (BS) is available. In such cases, reconfigurable intelligent surfaces (RIS) can be used to restore connectivity. To ensure timely PHO, the RIS configuration time must be taken into account, as the large number of RIS elements can limit responsiveness in time-sensitive scenarios. This work proposes a novel RIS-assisted PHO approach that optimizes the number of allocated RIS elements to balance signal processing complexity and link quality under handover timing constraints, making the RIS-assisted link more energy-efficient. An optimization problem based on particle swarm optimization (PSO) is formulated to determine the optimal end-to-end RIS link setup that runs offline to bypass latency constraints. Results show that reducing the number of RIS elements by 12\% leads to a 10\% decrease in dissipated energy without compromising the signal-to-noise ratio (SNR). Moreover, the RIS-assisted link achieves a 15--30 dB improvement in blocked regions while maintaining accurate PHO timing.

cs.CV↗

arXiv2025

Enhancing PLS of Indoor IRS-VLC Systems for Colluding and Non-Colluding Eavesdroppers

Most intelligent reflecting surface (IRS)-aided indoor visible light communication (VLC) studies ignore the time delays introduced by reflected paths, even though these delays are inherent in practical wideband systems. In this work, we adopt a realistic assumption of IRS-induced time delay for physical layer security (PLS) enhancement. We consider an indoor VLC system where an IRS is used to shape the channel so that the reflected signals add constructively at the legitimate user and create intersymbol interference at eavesdroppers located inside the coverage area. The resulting secrecy capacity maximisation over the IRS element allocation is formulated as a complex combinatorial optimisation problem and is solved using deep reinforcement learning with proximal policy optimisation (PPO). The approach is evaluated for both colluding eavesdroppers, which combine their received signals, and non-colluding eavesdroppers, which act independently. Simulation results are shown for various simulation setups, which demonstrate significant secrecy capacity gains. In a worst-case scenario, where the eavesdroppers have stronger channels than the legitimate user, the proposed PPO-based IRS allocation improves secrecy capacity by 107\% and 235\% in the colluding and non-colluding cases, respectively, compared with allocating all IRS elements to the legitimate user. These results demonstrate that time-delay-based IRS control can provide a strong secrecy advantage in practical indoor VLC scenarios.

cs.IT↗

arXiv2024

Automated Classification of Phonetic Segments in Child Speech Using Raw Ultrasound Imaging

Speech sound disorder (SSD) is defined as a persistent impairment in speech sound production leading to reduced speech intelligibility and hindered verbal communication. Early recognition and intervention of children with SSD and timely referral to speech and language therapists (SLTs) for treatment are crucial. Automated detection of speech impairment is regarded as an efficient method for examining and screening large populations. This study focuses on advancing the automatic diagnosis of SSD in early childhood by proposing a technical solution that integrates ultrasound tongue imaging (UTI) with deep-learning models. The introduced FusionNet model combines UTI data with the extracted texture features to classify UTI. The overarching aim is to elevate the accuracy and efficiency of UTI analysis, particularly for classifying speech sounds associated with SSD. This study compared the FusionNet approach with standard deep-learning methodologies, highlighting the excellent improvement results of the FusionNet model in UTI classification and the potential of multi-learning in improving UTI classification in speech therapy clinics.

cs.SD↗

arXiv2024

Blockchain-Empowered Immutable and Reliable Delivery Service (BIRDS) Using UAV Networks

Exploiting unmanned aerial vehicles (UAVs) for delivery services is expected to reduce delivery time and human resource costs. However, the proximity of these UAVs to the ground can make them an ideal target for opportunistic criminals. Consequently, UAVs may be hacked, diverted from their destinations, or used for malicious purposes. Furthermore, as a decentralized (peer-to-peer) technology, the blockchain has immense potential to enable secure, decentralized, and cooperative communication among UAVs. With this goal in mind, we propose the Blockchain-Empowered, Immutable, and Reliable Delivery Service (BIRDS) framework to address data security challenges. BIRDS deploys communication hubs across a scalable network. Following the registration phase of BIRDS, UAV node selection is carried out based on a specific consensus proof-of-competence (PoC), where UAVs are evaluated solely on their credibility. The chosen finalist is awarded a certificate for the BIRDS global order fulfillment system. The simulation results demonstrate that BIRDS requires fewer UAVs compared to conventional solutions, resulting in reduced costs and emissions. The proposed BIRDS framework caters to the requirements of numerous users while necessitating less network traffic and consuming low energy.

cs.NI↗

arXiv2024

Proactive Blockage Prediction for UAV assisted Handover in Future Wireless Network

The future wireless communication applications demand seamless connectivity, higher throughput, and low latency, for which the millimeter-wave (mmWave) band is considered a potential technology. Nevertheless, line-of-sight (LoS) is often mandatory for mmWave band communication, and it renders these waves sensitive to sudden changes in the environment. Therefore, it is necessary to maintain the LoS link for a reliable connection. One such technique to maintain LoS is using proactive handover (HO). However, proactive HO is challenging, requiring continuous information about the surrounding wireless network to anticipate potential blockage. This paper presents a proactive blockage prediction mechanism where an unmanned aerial vehicle (UAV) is used as the base station for HO. The proposed scheme uses computer vision (CV) to obtain potential blocking objects, user speed, and location. To assess the effectiveness of the proposed scheme, the system is evaluated using a publicly available dataset for blockage prediction. The study integrates scenarios from Vision-based Wireless (ViWi) and UAV channel modeling, generating wireless data samples relevant to UAVs. The antenna modeling on the UAV end incorporates a polarization-matched scenario to optimize signal reception. The results demonstrate that UAV-assisted Handover not only ensures seamless connectivity but also enhances overall network performance by 20%. This research contributes to the advancement of proactive blockage mitigation strategies in wireless networks, showcasing the potential of UAVs as dynamic and adaptable base stations.

eess.SP↗

arXiv2024

Leveraging IRS Induced Time Delay for Enhanced Physical Layer Security in VLC Systems

Indoor visible light communication (VLC) is considered secure against attackers outside the confined area where the light propagates, but it is still susceptible to interception from inside the coverage area. A new technology, intelligent reflecting surfaces (IRS), has been recently introduced, offering a way to enhance physical layer security (PLS). Most research on IRS-assisted VLC assumes the same time of arrival from all reflecting elements and overlooks the effect of time delay and the associated intersymbol interference. This paper tackles, for the first time, the effect of time delay on the secrecy rate in VLC systems. Our results show that, at a fixed light-emitting diode (LED) power of 3W, the secrecy rate can be enhanced by up to 253\% at random positions for the legitimate user when the eavesdropper is located within a 1-meter radius of the LED. Our results also show that careful allocation of the IRS elements can lead to enhanced PLS even when the eavesdropper has a more favourable position and, thus, a better channel gain than the legitimate user.

cs.IT↗

arXiv2023

Achieving 45% efficiency of CIGS/CdS Solar Cell by adding GaAs using optimization techniques

This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide (CdS). On the contrary, CIGS-based devices are more efficient, considering their device performance, environmentally benign nature, and reduced cost. Therefore, our paper proposes a numerical analysis of the homojunction PPN-junction GaAs solar cell structure along with n-ZnO front contact that was simulated using the Solar Cells Capacitance Simulator (SCAPS-1D) software. Moreover, we investigated optimization techniques for evaluating the effect of the thickness and the carrier density on the performance of the PPN layer on solar cell architecture. Subsequently, the paper discusses the electronic characteristics of adding GaAs material on the top of the conventional (PN) junction, further leading to improved values of the parameters, such as the power conversion efficiency (PCE), open-circuit voltage (VOC), fill factor (FF) and short-circuit current density (JSC) of the solar cell. The most promising results of our study show that adding the GaAs layer using the optimised values of thickness as 5 (μm) and carrier density as 1*1020 (1/cm) will result in the maximum PCE, VOC, FF, and JSC of 45.7%, 1.16V, 89.52% and 43.88 (mA/m2), respectively, for the proposed solar cell architecture.

eess.SY↗

arXiv2023

Enhancing Reliability in Federated mmWave Networks: A Practical and Scalable Solution using Radar-Aided Dynamic Blockage Recognition

This article introduces a new method to improve the dependability of millimeter-wave (mmWave) and terahertz (THz) network services in dynamic outdoor environments. In these settings, line-of-sight (LoS) connections are easily interrupted by moving obstacles like humans and vehicles. The proposed approach, coined as Radar-aided Dynamic blockage Recognition (RaDaR), leverages radar measurements and federated learning (FL) to train a dual-output neural network (NN) model capable of simultaneously predicting blockage status and time. This enables determining the optimal point for proactive handover (PHO) or beam switching, thereby reducing the latency introduced by 5G new radio procedures and ensuring high quality of experience (QoE). The framework employs radar sensors to monitor and track objects movement, generating range-angle and range-velocity maps that are useful for scene analysis and predictions. Moreover, FL provides additional benefits such as privacy protection, scalability, and knowledge sharing. The framework is assessed using an extensive real-world dataset comprising mmWave channel information and radar data. The evaluation results show that RaDaR substantially enhances network reliability, achieving an average success rate of 94% for PHO compared to existing reactive HO procedures that lack proactive blockage prediction. Additionally, RaDaR maintains a superior QoE by ensuring sustained high throughput levels and minimising PHO latency.

cs.NI↗

arXiv2023

Edge-Native Intelligence for 6G Communications Driven by Federated Learning: A Survey of Trends and Challenges

New technological advancements in wireless networks have enlarged the number of connected devices. The unprecedented surge of data volume in wireless systems empowered by artificial intelligence (AI) opens up new horizons for providing ubiquitous data-driven intelligent services. Traditional cloudcentric machine learning (ML)-based services are implemented by centrally collecting datasets and training models. However, this conventional training technique encompasses two challenges: (i) high communication and energy cost and (ii) threatened data privacy. In this article, we introduce a comprehensive survey of the fundamentals and enabling technologies of federated learning (FL), a newly emerging technique coined to bring ML to the edge of wireless networks. Moreover, an extensive study is presented detailing various applications of FL in wireless networks and highlighting their challenges and limitations. The efficacy of FL is further explored with emerging prospective beyond fifth-generation (B5G) and sixth-generation (6G) communication systems. This survey aims to provide an overview of the state-ofthe-art FL applications in key wireless technologies that will serve as a foundation to establish a firm understanding of the topic. Lastly, we offer a road forward for future research directions.

cs.NI↗

arXiv2022

Machine learning for accelerating the discovery of high performance low-cost solar cells: a systematic review

Solar photovoltaic (PV) technology has merged as an efficient and versatile method for converting the Sun's vast energy into electricity. Innovation in developing new materials and solar cell architectures is required to ensure lightweight, portable, and flexible miniaturized electronic devices operate for long periods with reduced battery demand. Recent advances in biomedical implantable and wearable devices have coincided with a growing interest in efficient energy-harvesting solutions. Such devices primarily rely on rechargeable batteries to satisfy their energy needs. Moreover, Artificial Intelligence (AI) and Machine Learning (ML) techniques are touted as game changers in energy harvesting, especially in solar energy materials. In this article, we systematically review a range of ML techniques for optimizing the performance of low-cost solar cells for miniaturized electronic devices. Our systematic review reveals that these ML techniques can expedite the discovery of new solar cell materials and architectures. In particular, this review covers a broad range of ML techniques targeted at producing low-cost solar cells. Moreover, we present a new method of classifying the literature according to data synthesis, ML algorithms, optimization, and fabrication process. In addition, our review reveals that the Gaussian Process Regression (GPR) ML technique with Bayesian Optimization (BO) enables the design of the most promising low-solar cell architecture. Therefore, our review is a critical evaluation of existing ML techniques and is presented to guide researchers in discovering the next generation of low-cost solar cells using ML techniques.

eess.SP↗

arXiv2022

FedTrees: A Novel Computation-Communication Efficient Federated Learning Framework Investigated in Smart Grids

Smart energy performance monitoring and optimisation at the supplier and consumer levels is essential to realising smart cities. In order to implement a more sustainable energy management plan, it is crucial to conduct a better energy forecast. The next-generation smart meters can also be used to measure, record, and report energy consumption data, which can be used to train machine learning (ML) models for predicting energy needs. However, sharing fine-grained energy data and performing centralised learning may compromise users' privacy and leave them vulnerable to several attacks. This study addresses this issue by utilising federated learning (FL), an emerging technique that performs ML model training at the user level, where data resides. We introduce FedTrees, a new, lightweight FL framework that benefits from the outstanding features of ensemble learning. Furthermore, we developed a delta-based early stopping algorithm to monitor FL training and stop it when it does not need to continue. The simulation results demonstrate that FedTrees outperforms the most popular federated averaging (FedAvg) framework and the baseline Persistence model for providing accurate energy forecasting patterns while taking only 2% of the computation time and 13% of the communication rounds compared to FedAvg, saving considerable amounts of computation and communication resources.

cs.LG↗

arXiv2022

Intelligent Blockage Prediction and Proactive Handover for Seamless Connectivity in Vision-Aided 5G/6G UDNs

The upsurge in wireless devices and real-time service demands force the move to a higher frequency spectrum. Millimetre-wave (mmWave) and terahertz (THz) bands combined with the beamforming technology offer significant performance enhancements for ultra-dense networks (UDNs). Unfortunately, shrinking cell coverage and severe penetration loss experienced at higher spectrum render mobility management a critical issue in UDNs, especially optimizing beam blockages and frequent handover (HO). Mobility management challenges have become prevalent in city centres and urban areas. To address this, we propose a novel mechanism driven by exploiting wireless signals and on-road surveillance systems to intelligently predict possible blockages in advance and perform timely HO. This paper employs computer vision (CV) to determine obstacles and users' location and speed. In addition, this study introduces a new HO event, called block event {BLK}, defined by the presence of a blocking object and a user moving towards the blocked area. Moreover, the multivariate regression technique predicts the remaining time until the user reaches the blocked area, hence determining best HO decision. Compared to typical wireless networks without blockage prediction, simulation results show that our BLK detection and PHO algorithm achieves 40\% improvement in maintaining user connectivity and the required quality of experience (QoE).

cs.NI↗

arXiv2021

An Outlook on the Interplay of Machine Learning and Reconfigurable Intelligent Surfaces: An Overview of Opportunities and Limitations

Recent advances in programmable metasurfaces, also dubbed as reconfigurable intelligent surfaces (RISs), are envisioned to offer a paradigm shift from uncontrollable to fully tunable and customizable wireless propagation environments, enabling a plethora of new applications and technological trends. Therefore, in view of this cutting edge technological concept, we first review the architecture and electromagnetic waves manipulation functionalities of RISs. We then detail some of the recent advancements that have been made towards realizing these programmable functionalities in wireless communication applications. Furthermore, we elaborate on how machine learning (ML) can address various constraints introduced by the real-time deployment of RISs, particularly in terms of latency, storage, energy efficiency, and computation. A review of the state-of-the-art research on the integration of ML with RISs is presented, highlighting their potentials as well as challenges. Finally, the paper concludes by offering a look ahead towards unexplored possibilities of ML mechanisms in the context of RISs.

cs.NI↗

arXiv2020

Revolutionizing Future Healthcare using Wireless on the Walls (WoW)

Following the standardization and deployment of fifth generation (5G) network, researchers have shifted their focus to beyond 5G communication. Existing technologies have brought forth a plethora of applications that could not have been imagined in the past years. Beyond 5G will enable us to rethink the capability, it will offer in various sectors including agriculture, search and rescue and more specifically in the delivery of health care services. Unobtrusive and non-invasive measurements using radio frequency (RF) sensing, monitoring and control of wearable medical devices are the areas that would potentially benefit from beyond 5G. Applications such as RF sensing, device charging and remote patient monitoring will be a key challenge using millimetre (mmWave) communication. The mmWaves experience multi-path induced fading, where the rate of attenuation is larger as compared to the microwaves. Eventually, mmWave communication systems would require range extenders and guided surfaces. A proposed solution is the use of intelligent reflective surfaces, which will have the ability to manipulate electromagnetic (EM) signals. These intelligent surfaces mounted and/or coated on walls aka - Intelligent Walls are planar and active surfaces, which will be a key element in beyond 5G and 6G communication. These intelligent walls equipped with machine learning algorithm and computation power would have the ability to manipulate EM waves and act as gateways in the heterogeneous network environment. The article presents the application and vision of intelligent walls for next-generation healthcare in the era of beyond 5G.

eess.SP↗