arXiv subjects

Aiguo Xu

Publications and source records attributed to Aiguo Xu.

At least 37 records · Page 2Linked to original sources

arXiv2022

Discrete Boltzmann modeling of Rayleigh-Taylor instability: effects of interfacial tension, viscosity and heat conductivity

The Rayleigh-Taylor Instability (RTI) in compressible flow with inter-molecular interactions is probed via the Discrete Boltzmann Method (DBM). The effects of interfacial tension, viscosity and heat conduction are investigated. It is found that the influences of interfacial tension on the perturbation amplitude, bubble velocity, and two kinds of entropy production rates all show differences at different stages of RTI evolution. It inhibits the RTI evolution at the bubble acceleration stage, while at the asymptotic velocity stage, it first promotes and then inhibits the RTI evolution. Viscosity and heat conduction inhibit the RTI evolution. Viscosity shows a suppressive effect on entropy generation rate related to heat flow at the early stage but a first promotive and then suppressive effect on entropy generation rate related to heat flow at a later stage. Heat conduction shows a promotive effect on entropy generation rate related to heat flow at an early stage. Still, it offers a first promotive and then suppressive effect on entropy generation rate related to heat flow at a later stage. By introducing the morphological boundary length, we found that the stage of exponential growth of interface length with time corresponds to the bubble acceleration stage. The first maximum point of interface length change rate and the first maximum point of the change rate of entropy generation rate related to viscous stress can be used as a new criterion for RTI to enter the asymptotic velocity stage.

physics.flu-dyn↗

arXiv2022

Rayleigh-Taylor instability under multi-mode perturbation: discrete Boltzmann modeling with tracers

The Rayleigh-Taylor Instability (RTI) under multi-mode perturbation in compressible flow is probed via the Discrete Boltzmann Modeling (DBM) with tracers. The distribution of tracers provides clear boundaries between light and heavy fluids in the position space. Besides, the position-velocity phase space offers a new perspective for understanding the flow behavior of RTI with intuitive geometrical correspondence. The effects of viscosity, acceleration, compressibility, and Atwood number on the mixing of material and momentum and the mean non-equilibrium strength at the interfaces are investigated separately based on both the mixedness defined by the tracers and the non-equilibrium strength defined by the DBM. The mixedness increases with viscosity during early stage but decreases with viscosity at the later stage. Acceleration, compressibility, and Atwood number show enhancement effects on mixing based on different mechanisms. After the system relaxes from the initial state, the mean non-equilibrium strength at the interfaces presents an initially increasing and then declining trend, which is jointly determined by the interface length and the macroscopic physical quantity gradient. We conclude that the four factors investigated all significantly affect early evolution behavior of RTI system, such as the competition between interface length and macroscopic physical quantity gradient. The results contribute to the understanding of the multi-mode RTI evolutionary mechanism and the accompanied kinetic effects.

physics.flu-dyn↗

arXiv2022

Thermodynamic non-equilibrium effects in bubble coalescence: A discrete Boltzmann study

The Thermodynamic Non-Equilibrium (TNE) effects in the coalescing process of two initially static bubbles under thermal conditions are investigated by a Discrete Boltzmann Model (DBM). The spatial distributions of the typical none-quilibrium quantity, i.e., the Non-Organized Momentum Fluxes (NOMF) during evolutions are investigated in detail. The density-weighted statistical method is used to highlight the relationship between the TNE effects and the morphological or kinetics characteristics of bubble coalescence. It is found that the $xx$-component and $yy$-component of NOMF are anti-symmetrical; the $xy$-component changes from an anti-symmetric internal and external double quadrupole structure to an outer octupole structure during the coalescing process. More importantly, the evolution of the averaged $xx$-component of NOMF provides two characteristic instants, which divide the non-equilibrium process into three stages. The first instant corresponds to the moment when the mean coalescing speed gets the maximum and at this time the ratio of minor and major axes is about $1/2$. The second instant corresponds to the moment when the ratio of minor and major axes gets $1$ for the first time. It is interesting to find that the three quantities, TNE intensity, acceleration of coalescence and negative slope of boundary length, show a high degree of correlation and attain their maxima simultaneously. Surface tension and heat conduction accelerate the process of bubble coalescence while viscosity delays it. Both surface tension and viscosity enhance the global non-equilibrium intensity, whereas heat conduction restrains it. These TNE features and findings present some new insights into the kinetics of bubble coalescence.

physics.flu-dyn↗

arXiv2021

Discrete Boltzmann Modeling of Plasma Shock Wave

Plasma shock waves widely exist and play an important role in high-energy-density environment, especially in the inertial confinement fusion. Due to the large gradient of macroscopic physical quantities and the coupled thermal, electrical, magnetic and optical phenomena, there exist not only hydrodynamic non-equilibrium (HNE) effects, but also strong thermodynamic non-equilibrium (TNE) effects around the wavefront. In this work, a two-dimensional single-fluid discrete Boltzmann model is proposed to investigate the physical structure of ion shock. The electron is assumed inertialess and always in thermodynamic equilibrium. The Rankine-Hugoniot relations for single fluid theory of plasma shock wave is derived. It is found that the physical structure of shock wave in plasma is significantly different from that in normal fluid and somewhat similar to that of detonation wave from the sense that a peak appears in the front. The non-equilibrium effects around the shock front become stronger with increasing Mach number. The charge of electricity deviates oppositely from neutrality in upstream and downstream of the shock wave. The large inertia of the ions causes them to lag behind, so the wave front charge is negative and the wave rear charge is positive. The variations of HNE and TNE with Mach number are numerically investigated. The characteristics of TNE can be used to distinguish plasma shock wave from detonation wave.

physics.plasm-ph↗

arXiv2021

Effects of the initial perturbations on the Rayleigh-Taylor-Kelvin-Helmholtz instability system

In the paper, the effects of initial perturbations on the Rayleigh-Taylor instability (RTI), Kelvin-Helmholtz instability (KHI), and the coupled Rayleigh-Taylor-Kelvin-Helmholtz instability (RTKHI) systems are investigated using a multiple-relaxation-time discrete Boltzmann model. Six different perturbation interfaces are designed to study the effects of the initial perturbations on the instability systems. Based on the mean heat flux strength $D_{3,1}$, the effects of initial interfaces on the coupled RTKHI are examined in detail. The research is focused on two aspects: (i) the main mechanism in the early stage of the RTKHI, (ii) the transition point from KHI-like to RTI-like for the case where the KHI dominates at earlier time and the RTI dominates at later time. It is found that the early main mechanism is related to the shape of the initial interface, which is represented by both the bilateral contact angle $θ_{1}$ and the middle contact angle $θ_{2}$. The influence of inverted parabolic and inverted ellipse perturbations ($θ_{1}<90$) on the transition point of the RTKHI system is greater than that of other interfaces.

physics.flu-dyn↗

arXiv2021

Delineation of the flow and mixing induced by Rayleigh-Taylor instability through tracers

Rayleigh-Taylor-instability(RTI) induced flow and mixing are of great importance in both nature and engineering scenarios. To capture the underpinning physics, tracers are introduced to make a supplement to discrete Boltzmann simulation of RTI in compressible flows. Via marking two types of tracers with different colors, the tracer distribution provides a clear boundary of two fluids during the RTI evolution. Fine structures of the flow and thermodynamic nonequilibrium behavior around the interface in a miscible two-fluid system are delineated. Distribution of tracers in its velocity phase space makes a charming pattern showing quite dense information on the flow behavior, which opens a new perspective for analyzing and accessing significantly deep insights into the flow system. RTI mixing is further investigated via tracer defined local mixedness. The appearance of Kelvin-Helmholtz instability is quantitatively captured by mixedness averaged align the direction of the pressure gradient. The role of compressibility and viscosity on mixing are investigated separately, both of which show two-stage effect. The underlying mechanism of the two-stage effect is interpreted as the development of large structures at the initial stage and the generation of small structures at the late stage. At the late stage, for a fixed time, a saturation phenomenon of viscosity is found that further increase of viscosity cannot see an evident decline in mixedness. The mixing statues of heavy and light fluids are not synchronous and the mixing of a RTI system is heterogenous. The results are helpful for understanding the mechanism of flow and mixing induced by RTI.

physics.flu-dyn↗

arXiv2020

Morphological and non-equilibrium analysis of coupled Rayleigh-Taylor-Kelvin-Helmholtz instability

In this paper, the coupled Rayleigh-Taylor-Kelvin-Helmholtz instability(RTI, KHI and RTKHI, respectively) system is investigated using a multiple-relaxation-time discrete Boltzmann model. Both the morphological boundary length and thermodynamic nonequilibrium (TNE) strength are introduced to probe the complex configurations and kinetic processes. In the simulations, RTI always plays a major role in the later stage, while the main mechanism in the early stage depends on the comparison of buoyancy and shear strength. It is found that, both the total boundary length $L$ of the condensed temperature field and the mean heat flux strength $D_{3,1}$ can be used to measure the ratio of buoyancy to shear strength, and to quantitatively judge the main mechanism in the early stage of the RTKHI system. Specifically, when KHI (RTI) dominates, $L^{KHI} > L^{RTI}$ ($L^{KHI} < L^{RTI}$), $D_{3,1}^{KHI} > D_{3,1}^{RTI}$ ($D_{3,1}^{KHI} < D_{3,1}^{RTI}$); when KHI and RTI are balanced, $L^{KHI} = L^{RTI}$, $D_{3,1}^{KHI} = D_{3,1}^{RTI}$. A second sets of findings are as below: For the case where the KHI dominates at earlier time and the RTI dominates at later time, the evolution process can be roughly divided into two stages. Before the transition point of the two stages, $L^{RTKHI}$ initially increases exponentially, and then increases linearly. Hence, the ending point of linear increasing $L^{RTKHI}$ can work as a geometric criterion for discriminating the two stages. The TNE quantity, heat flux strength $D_{3,1}^{RTKHI}$, shows similar behavior. Therefore, the ending point of linear increasing $D_{3,1}^{RTKHI}$ can work as a physical criterion for discriminating the two stages.

physics.flu-dyn↗

arXiv2020

Kinetic modeling of multiphase flow based on simplified Enskog equation

A new kinetic model for multiphase flow was presented under the framework of the discrete Boltzmann method (DBM). Significantly different from the previous DBM, a bottom-up approach was adopted in this model. The effects of molecular size and repulsion potential were described by the Enskog collision model; the attraction potential was obtained through the mean-field approximation method. The molecular interactions, which result in the non-ideal equation of state and surface tension, were directly introduced as an external force term. Several typical benchmark problems, including Couette flow, two-phase coexistence curve, the Laplace law, phase separation, and the collision of two droplets, were simulated to verify the model. Especially, for two types of droplet collisions, the strengths of two non-equilibrium effects, $\bar{D}_2^*$ and $\bar{D}_3^*$, defined through the second and third order non-conserved kinetic moments of $(f - f ^{eq})$, are comparatively investigated, where $f$ ($f^{eq}$) is the (equilibrium) distribution function. It is interesting to find that during the collision process, $\bar{D}_2^*$ is always significantly larger than $\bar{D}_3^*$, $\bar{D}_2^*$ can be used to identify the different stages of the collision process and to distinguish different types of collisions. The modeling method can be directly extended to a higher-order model for the case where the non-equilibrium effect is strong, and the linear constitutive law of viscous stress is no longer valid.

physics.comp-ph↗

arXiv2020

Multiple-relaxation-time discrete Boltzmann modeling of multicomponent mixture with nonequilibrium effects

A multiple-relaxation-time discrete Boltzmann model (DBM) is proposed for multicomponent mixtures, where compressible, hydrodynamic, and thermodynamic nonequilibrium effects are taken into account. It allows the specific heat ratio and the Prandtl number to be adjustable, and is suitable for both low and high speed fluid flows. From the physical side, besides being consistent with the multicomponent Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit, the DBM provides more kinetic information about the nonequilibrium effects. The physical capability of DBM to describe the nonequilibrium flows, beyond the Navier-Stokes representation, enables the study of the entropy production mechanism in complex flows, especially in multicomponent mixtures. Moreover, the current kinetic model is employed to investigate nonequilibrium behaviors of the compressible Kelvin-Helmholtz instability (KHI). It is found that, in the dynamic KHI process, the mixing degree and fluid flow are similar for cases with various thermal conductivity and initial temperature configurations. Physically, both heat conduction and temperature exert slight influences on the formation and evolution of the KHI.

physics.flu-dyn↗

arXiv2019

Nonequilibrium and morphological characterizations of Kelvin-Helmholtz instability in compressible flows

We investigate the effects of viscosity and heat conduction on the onset and growth of Kelvin-Helmholtz instability (KHI) via an efficient discrete Boltzmann model. Technically, two effective approaches are presented to quantitatively analyze and understand the configurations and kinetic processes. One is to determine the thickness of mixing layers through tracking the distributions and evolutions of the thermodynamic nonequilibrium (TNE) measures; the other is to evaluate the growth rate of KHI from the slopes of morphological functionals. Physically, it is found that the time histories of width of mixing layer, TNE intensity, and boundary length show high correlation and attain their maxima simultaneously. The viscosity effects are twofold, stabilize the KHI, and enhance both the local and global TNE intensities. Contrary to the monotonically inhibiting effects of viscosity, the heat conduction effects firstly refrain then enhance the evolution afterwards. The physical reasons are analyzed and presented.

cond-mat.soft↗

arXiv2019

Entropy production in thermal phase separation: a kinetic-theory approach

Entropy production during the process of thermal phase-separation of multiphase flows is investigated by means of a discrete Boltzmann kinetic model. The entropy production rate is found to increase during the spinodal decomposition stage and to decrease during the domain growth stage, attaining its maximum at the crossover between the two. Such behaviour provides a natural criterion to identify and discriminate between the two regimes. Furthermore, the effects of heat conductivity, viscosity and surface tension on the entropy production rate are investigated by systematically probing the interplay between non-equilibrium energy and momentum fluxes. It is found that the entropy production rate due to energy fluxes is an increasing function of the Prandtl number, while the momentum fluxes exhibit an opposite trend. On the other hand, both contributions show an increasing trend with surface tension. The present analysis inscribes within the general framework of non-equilibrium thermodynamics and consequently it is expected to be relevant to a broad class of soft-flowing systems far from mechanical and thermal equilibrium.

cond-mat.stat-mech↗

arXiv2018

A One-Dimensional Discrete Boltzmann Model for Detonation and an Abnormal Detonation Phenomenon

A one-dimensional discrete Boltzmann model for detonation simulation is presented. Instead of numerical solving Navier-Stokes equations, this model obtains the information of flow field through numerical solving specially discretized Boltzmann equation. Several classical benchmarks including Sod shock wave tube, Colella explosion problem, and one-dimensional self-sustainable stable detonation are simulated to validate the new model. Based on the new model, the influence of negative temperature coefficient of reaction rate on detonation is further investigated. It is found that an abnormal detonation with two wave heads periodically appears under negative temperature coefficient condition. The causes of the abnormal detonation are analyzed. One typical cycle of the periodic abnormal detonation and its development process are discussed.

physics.flu-dyn↗

arXiv2018

Comparative Study on Several Criteria for Non-equilibrium Phase Separation

Several different kinds of criteria for non-equilibrium phase separation to discriminate the two stages, the spinnodal decompostion (SD) and domain growth (DG), are compared and further investigated. The characteristic domain size and morphological function present two geometric criteria. Both of them can only provide rough estimations for the crossover from SD to DG. The reason for domain size is that the crossover in this description covers a process, instead of a specific time. The reason for the morphological function is that the result may rely on chosen threshold value. However, both the non-equilibrium strength and the entropy production rate are physical criteria and are more convenient to provide critical times. In fact, not only the non-equilibrium strength defined in the moment space opened by all the independent components of the used non-equilibrium quantities but also those defined in its subspaces can be used as criteria. Each of those criteria characterizes the phase separation process from its own perspective. Consequently, the obtained critical times may show slight differences. It should be pointed out that these slight differences are not contradictive, but consistent with each other and complementary in describing the complex phenomena.

physics.flu-dyn↗

arXiv2018

Discrete Boltzmann trans-scale modeling of high-speed compressible flows

We present a general framework for constructing trans-scale \emph{discrete Boltzmann models} (DBMs) for high-speed compressible flows ranging from continuum to transition regime. This is achieved by designing a higher-order discrete equilibrium distribution function which satisfies additional nonhydrodynamic kinetic moments. In order to characterize the \emph{% thermodynamic non-equilibrium} (TNE) effects and estimate the condition under which the DBMs at various levels should be used, two novel measures are presented: (i) the relative TNE strength, describing the relative strength of the ($N+1$)-th order TNE effects to the $N$-th order one; (ii) the TNE discrepancy between DBM simulation and relevant theoretical analysis. Whether or not the higher-order TNE effects should be taken into account in the modeling and which level of DBM should be adopted, is best described by the relative TNE intensity and/or the discrepancy, rather than by the value of the Knudsen number. As a model example, a two-dimensional DBM with $26$ discrete velocities at Burnett level is formulated, verified, and validated.

physics.flu-dyn↗

arXiv2018

Comparative study of discrete Boltzmann model and Navier-Stokes

Discrete Boltzmann model (DBM) is a type of coarse-grained mesoscale kinetic model derived from the Boltzmann equation. Physically, it is roughly equivalent to a hydrodynamic model supplemented by a coarse-grained model for the relevant thermodynamic non-equilibrium (TNE) behaviours. The Navier-Stokes (NS) model is a traditional macroscopic hydrodynamic model based on continuity hypothesis and conservation laws. In this study, the two models are compared from two aspects, physical capability and computational cost, by simulating two kinds of flow problems including the thermal Couette flow and a Mach 3 step problem. In the cases where the TNE effects are weak, both the two models give accurate results for the hydrodynamic behaviour. Besides, DBM can provide more detailed non-equilibrium information, while the NS is more efficient if concern only the density, momentum, energy and their derived quantities. It is concluded that, if the TNE effects are strong or are to be investigated, the NS is insufficient while DBM is a good choice. While in the cases where the TNE effects are weak and only the macro flow fields are to be studied, the NS is more preferable.

physics.flu-dyn↗

arXiv2018

Discrete Boltzmann method for non-equilibrium flows: based on Shakhov model

A general framework for constructing discrete Boltzmann model for non-equilibrium flows based on the Shakhov model is presented. The Hermite polynomial expansion and a set of discrete velocity with isotropy are adopted to solve the kinetic moments of discrete equilibrium distribution function. Such a model possesses both an adjustable specific heat ratio and Prandtl number, and can be applied to a wide range of flow regimes including continuous, slip, and transition flows. To recover results for actual situations, the nondimensionalization process is demonstrated. To verify and validate the new model, several typical non-equilibrium flows including the Couette flow, Fourier flow, unsteady boundary heating problem, cavity flow, and Kelvin-Helmholtz instability are simulated. Comparisons are made between the results of discrete Boltzmann model and those of previous models including analytic solution in slip flow, Lattice ES-BGK, and DSMC based on both BGK and hard-sphere models. The results show that the new model can accurately capture the velocity slip and temperature jump near the wall, and show excellent performance in predicting the non-equilibrium flow even in transition flow regime. In addition, the measurement of non-equilibrium effects is further developed and the non-equilibrium strength $D^*_n$ in the n-th order moment space is defined. The nonequilibrium characteristics and the advantage of using $D^*_n$ in Kelvin-Helmholtz instability are discussed. It concludes that the non-equilibrium strength $D^*_n$ is more appropriate to describe the interfaces than the individual components of $Delta^*_n$. Besides, the $D^*_3$ and $D^*_{3,1}$ can provide higher resolution interfaces in the simulation of Kelvin-Helmholtz instability.

physics.flu-dyn↗

arXiv2018

Collaboration and Competition Between Richtmyer-Meshkov instability and Rayleigh-Taylor instability

The two-dimensional Richtmyer-Meshkov Instability(RMI) system and the coexisting system combined with Rayleigh-Taylor Instability(RTI) are simulated with a multiple-relaxation time discrete Boltzmann model. It is found that, for the RMI system, the correlation between globally averaged non-organized energy flux and nonuniformity of temperature is nearly 1; the correlation between globally averaged non-organized momentum flux and nonuniformity of velocity and that between globally averaged thermodynamic non-equilibrium strength and nonuniformity of density are also high. In the coexisting system combined with RTI, the collaboration and competition mechanisms of the two instabilities are investigated. In the case where RMI dominates, an interesting interface inversion process is observed. The parameter regions for RMI dominates and RTI dominates are given. The effects of gravity acceleration and Mach number on nonequilibrium are carefully studied, via which the effects of RTI and RMI strengths on the extent of material mixing are better probed.

cond-mat.soft↗

arXiv2018

Discrete ellipsoidal statistical BGK model and Burnett equations

To simulate non-equilibrium compressible flows, a new discrete Boltzmann model, discrete Ellipsoidal Statistical(ES)-BGK model, is proposed. Compared with the original discrete BGK model, the discrete ES-BGK has a flexible Prandtl number. For the discrete ES-BGK model in Burnett level, two kinds of discrete velocity model are introduced; the relations between non-equilibrium quantities and the viscous stress and heat flux in Burnett level are established. The model is verified via four benchmark tests. In addition, a new idea is introduced to recover the actual distribution function through the macroscopic quantities and their space derivatives. The recovery scheme works not only for discrete Boltzmann simulation but also for hydrodynamic ones, for example, based on the Navier-Stokes, the Burnett equations, etc.

physics.flu-dyn↗