arXiv subjects

Ailun Yi

Publications and source records attributed to Ailun Yi.

12 recordsLinked to original sources

arXiv2026

High-Efficiency Acousto-Optic Modulation on Non-Suspended Thin-Film Lithium Tantalate

Acousto-optic (AO) interactions provide a powerful interface between the microwave and optical domains, enabling functionalities such as optical switching, non-reciprocal propagation and efficient microwave-to-optical transduction. Integrated demonstrations to date have largely relied on thin-film lithium niobate (TFLN), which offers strong piezoelectric response and low optical loss performance. Here, we establish lithium tantalate on insulator (LTOI) as a scalable platform for integrated acousto-optics. LTOI combines intrinsically low birefringence, high optical damage threshold, strong electro-optic and Kerr nonlinearities, and superior acoustic quality factors with a mature high-volume manufacturing base. We demonstrate for the first time acousto-optic modulation on the LTOI platform. By exploiting the anisotropy of surface acoustic waves, we reveal a direct correlation between acousto-optic modulation efficiency and the electromechanical coupling coefficient of lithium tantalate. In particular, acoustic excitation along the crystal Z-axis enhances the higher-order R1 mode, yielding the highest modulation efficiency. Our Mach-Zehnder interferometers achieve a modulation efficiency of 0.68 $\mathrm{\mathbf{V \cdot cm}}$, while racetrack resonators reach 0.022 $\mathrm{\mathbf{V \cdot cm}}$ -representing, to the best of our knowledge, the lowest $\mathrm{V_\pi L}$ demonstrated in non-suspended ferroelectric platforms. This record performance directly enables microwave-to-optical conversion without suspended structures, establishing LTOI as a robust and scalable platform for integrated acousto-optics with broad applications in communications, signal processing, and quantum information technologies.

physics.optics↗

arXiv2026

Monolithic integration of diverse crystalline thin films on diamond for near-junction thermal management

The pursuit of extreme miniaturization and high power in 6G RF front-ends has cast thermal dissipation as the central challenge. Here, we have demonstrated the monolithic integration of functionally distinct single-crystal thin films, including \b{eta}-Ga2O3, Si, GaN, and LiTaO3, onto a single diamond substrate using a multi-step transfer printing technique. Focusing on the critical \b{eta}-Ga2O3/diamond interface, we achieve an exceptional interfacial thermal conductance (ITC) of 149 MW m-2 K-1 through ultra-high vacuum (UHV) annealing, creating an atomically sharp interface featuring covalent bonding. Vibrational electron energy-loss spectroscopy (EELS) analysis combining with molecular dynamics (MD) simulations reveal that distinctive interfacial phonon modes at the \b{eta}-Ga2O3/diamond heterointerface dominate ultrahigh ITC. We experimentally demonstrate that by improving the ITC, the thermal resistance (Rth) of a diamond-based \b{eta}-Ga2O3 MOSFET is driven to a record-low value of 1.58 K mm W-1, underscoring the critical role of interface engineering in near-junction thermal management for diamond-integrated devices. This work demonstrates a scalable, diamond-based monolithic integration platform designed to solve the near-junction thermal challenges in high-power RF front-ends.

cond-mat.mtrl-sci↗

arXiv2025

Octave-spanning, deterministic single soliton generation in 4H-silicon carbide-on-insulator microring resonators

The miniaturization of self-referencing frequency comb systems enables emerging applications in metrology and spectroscopy. One major challenge in realizing the chip-scale self-referencing function is to generate octave-spanning soliton microcombs with low operation power. Accessing soliton states is also not trivial due to the thermal effect. Though an auxiliary laser was utilized to compensate for the thermal effect, deterministic single soliton generation is still elusive, especially for broadband operation. In this work, dispersion management is performed for a 4H-silicon carbide-on-insulator (SiCOI) multi-mode microring resonator, benefiting from the submicron-confinement waveguide layout. The fundamental transverse electric (TE) mode is engineered to anomalous dispersion for two dispersive waves generation over an octave span. While a higher order TE mode is engineered to normal dispersion to accommodate the auxiliary light for thermal compensation. The normal dispersion prevents modulation-instability Kerr comb generation, allowing for a large soliton existence range. We achieve microring resonators with Q up to 5.8 million and sub-milli-watt-threshold Kerr comb generation. Combining the dispersion-managed design and high Q device, we demonstrate the deterministic generation of a single soliton comb spanning beyond an octave with a low on-chip power of 60 mW. Our demonstration paves the way to realize chip-scale, turn-key, self-referenced frequency combs.

physics.optics↗

arXiv2025

Deterministic and Scalable Coupling of Single 4H-SiC Spin Defects into Bullseye Cavities

Silicon carbide (SiC) has attracted significant attention as a promising quantum material due to its ability to host long-lived, optically addressable color centers with solid-state photonic interfaces. The CMOS compatibility of 4H-SiCOI (silicon-carbide-on-insulator) makes it an ideal platform for integrated quantum photonic devices and circuits. However, the deterministic integration of single spin defects into high-performance photonic cavities on this platform has remained a key challenge. In this work, we demonstrate the deterministic and scalable coupling of both ensemble (PL4) and single PL6 spin defects into monolithic bullseye cavities on the 4H-SiCOI platform. By tuning the cavity resonance, we achieve a 40-fold enhancement of the zero-phonon line (ZPL) intensity from ensemble PL4 defects, corresponding to a Purcell factor of approximately 5.0. For deterministically coupled single PL6 defects, we observe a threefold increase in the saturated photon count rate, confirm single-photon emission, and demonstrate coherent control of the spin state through optically detected magnetic resonance (ODMR), resonant excitation, and Rabi oscillations. These advancements establish a viable pathway for developing scalable, high-performance SiC-based quantum photonic circuits.

quant-ph↗

arXiv2025

Strain Enhanced Spin Readout Contrast in Silicon Carbide Membranes

Quantum defects in solids have emerged as a transformative platform for advancing quantum technologies. A key requirement for these applications is achieving high-fidelity single-spin readout, particularly at room temperature for quantum biosensing. Here, we demonstrate through ab initio simulations of a primary quantum defect in 4H silicon carbide that strain is an effective control parameter for significantly enhancing readout contrast. We validate this principle experimentally by inducing local strain in silicon carbide-on-insulator membranes, achieving a readout contrast exceeding 60% while preserving the favorable coherence properties of single spins. Our findings establish strain engineering as a powerful and versatile strategy for optimizing coherent spin-photon interfaces in solid-state quantum systems.

quant-ph↗

arXiv2025

Stable Soliton Microcomb Generation in X-cut Lithium Tantalate via Thermal-Assisted Photorefractive Suppression

Chip-based soliton frequency microcombs combine compact size, broad bandwidth, and high coherence, presenting a promising solution for integrated optical telecommunications, precision sensing, and spectroscopy. Recent progress in ferroelectric thin films, particularly thin-film Lithium niobate (LN) and thin-film Lithium tantalate (LT), has significantly advanced electro-optic (EO) modulation and soliton microcombs generation, leveraging their strong third-order nonlinearity and high Pockels coefficients. However, achieving soliton frequency combs in X-cut ferroelectric materials remains challenging due to the competing effects of thermo-optic and photorefractive phenomena. These issues hinder the simultaneous realization of soliton generation and high-speed EO modulation. Here, following the thermal-regulated carrier behaviour and auxiliary-laser-assisted approach, we propose a convenient mechanism to suppress both photorefractive and thermal dragging effect at once, and implement a facile method for soliton formation and its long-term stabilization in integrated X-cut LT microresonators for the first time. The resulting mode-locked states exhibit robust stability against perturbations, enabling new pathways for fully integrated photonic circuits that combine Kerr nonlinearity with high-speed EO functionality.

physics.optics↗

arXiv2024

Room-Temperature entangled quantum processor on integrated semiconductor photonics platform

The rise of the 4H-silicon-carbide-on-insulator (SiCOI) platform marks a promising pathway towards the realization of monolithic quantum photonic networks. However, the challenge of establishing room-temperature entangled registers on these integrated photonics platforms remains unresolved. Herein, we demonstrate the first entangled processor on the SiCOI platform. We show that both deterministic generation of single divacancy electron spins and near-unity spin initialization of a single $^{13}$C nuclear spin can be achieved on SiCOI at room temperature. Besides coherently manipulating the single nuclear spin, a maximally entangled state with a fidelity of 0.89 has been prepared on this CMOS-compatible semiconductor-integrated photonics system. This work establishes the foundation for compact and on-chip solutions within existing defect-based computing and sensing protocols, positioning the SiCOI platform as the most promising candidate for integrated monolithic quantum photonic networks.

quant-ph↗

arXiv2024

A hybrid single quantum dot coupled cavity on a CMOS-compatible SiC photonic chip for Purcell-enhanced deterministic single-photon emission

The ability to control nonclassical light emission from a single quantum emitter by an integrated cavity may unleash new perspectives for integrated photonic quantum applications. However, coupling a single quantum emitter to cavity within photonic circuitry towards creation of the Purcell-enhanced single-photon emission is elusive due to the complexity of integrating active devices in low-loss photonic circuits. Here we demonstrate a hybrid micro-ring resonator (HMRR) coupled with self-assembled quantum dots (QDs) for cavity-enhanced deterministic single-photon emission. The HMRR cavity supports whispering-gallery modes with quality factors up to 7800. By further introducing a micro-heater, we show that the photon emission of QDs can be locally and dynamically tuned over one free spectral ranges of the HMRR (~4 nm). This allows precise tuning of individual QDs in resonance with the cavity modes, thereby enhancing single-photon emission with a Purcell factor of about 4.9. Our results on the hybrid integrated cavities coupled with two-level quantum emitters emerge as promising devices for chip-based scalable photonic quantum applications.

quant-ph↗

arXiv2022

Silicon carbide for integrated photonics

The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index, and CMOS-compatible device fabrication process. Here, we provide an overview of SiC-based integrated photonics, presenting the latest progress on investigating its basic optical and optoelectronic properties, as well as the recent developments in the fabrication of several typical approaches for light confinement structures that form the basic building blocks for low-loss, high functional and industry-compatible integrated photonic platform. Moreover, recent works employing SiC as optically-readable spin hosts for quantum information applications are also summarized and discussed. As a still-developing integrated photonic platform, the prospects and challenges of SiC material platform in the field of integrated photonics are also discussed, followed by potential solutions.

physics.optics↗

arXiv2022

Hybrid integration of deterministic quantum dots-based single-photon sources with CMOS-compatible silicon carbide photonics

Thin film 4H-silicon carbide (4H-SiC) is emerging as a contender for realizing large-scale optical quantum circuits due to its high CMOS technology compatibility and large optical nonlinearities. Though, challenges remain in producing wafer-scale 4H-SiC thin film on insulator (4H-SiCOI) for dense integration of photonic circuits, and in efficient coupling of deterministic quantum emitters that are essential for scalable quantum photonics. Here we demonstrate hybrid integration of self-assembled InGaAs quantum dots (QDs) based single-photon sources (SPSs) with wafer-scale 4H-SiC photonic chips prepared by ion slicing technique. By designing a bilayer vertical coupler, we realize generation and highly efficient routing of single-photon emission in the hybrid quantum photonic chip. Furthermore, we realize a chip-integrated beamsplitter operation for triggered single photons through fabricating a 1x2 multi-mode interferometer (MMI) with a symmetric power splitting ratio of 50:50. The successful demonstration of heterogeneously integrating QDs-based SPSs on 4H-SiC photonic chip prepared by ion slicing technique constitutes an important step toward CMOS-compatible, fast reconfigurable quantum photonic circuits with deterministic SPSs.

physics.optics↗

arXiv2021

An Ultrahigh-Q Microresonator on 4H-silicon-carbide-on-insulator Platform for Multiple Harmonics, Cascaded Raman Lasing and Kerr Comb Generations

The realization of ultrahigh quality (Q) resonators regardless of the underpinning material platforms has been a ceaseless pursuit, because the high Q resonators provide an extreme environment of storage of light to enable observations of many unconventional nonlinear optical phenomenon with high efficiencies. Here, we demonstrate an ultra-high Q factor (7.1*10^6) microresonator on the 4H-silicon-carbide-on-insulator (4H-SiCOI) platform in which both \c{hi}^(2) and \c{hi}^(3) nonlinear processes of high efficiencies have been generated. Broadband frequency conversions, including second-, third-, fourth-harmonic generation were observed. Cascaded Raman lasing was demonstrated in the SiC microresonator for the first time to the best of our knowledge. Broadband Kerr frequency combs covering from 1300 to 1700 nm were achieved using a dispersion-engineered SiC microresonator. Our demonstration is a significant milestone in the development of SiC photonic integrated devices.

physics.optics↗

arXiv2021

Visible and Near-infrared Microdisk Resonators on a 4H-Silicon-Carbide-on-Insulator Platform

Wavelength-sized microdisk resonators were fabricated on a single crystalline 4H-silicon-carbide-oninsulator platform (4H-SiCOI). By carrying out microphotoluminescence measurements at room temperature, we show that the microdisk resonators support whispering-gallery modes (WGMs) with quality factors up to $5.25 \times 10^3$ and mode volumes down to $2.69 \times(λ/n)^3$ at the visible and near-infrared wavelengths. Moreover, the demonstrated wavelength-sized microdisk resonators exhibit WGMs whose resonant wavelengths compatible with the zero-phonon lines of spin defects in 4H-SiCOI, making them a promising candidate for applications in cavity quantum electrodynamics and integrated quantum photonic circuits.

physics.optics↗