SearcharxivSearch

arXiv subjects

Aitor Villar

Publications and source records attributed to Aitor Villar.

8 recordsLinked to original sources

Terrestrial readiness campaign for space-to-ground quantum communications with a space-qualified entangled photon-pair system

Realizing a global quantum internet relies on the deployment of robust satellite-based entanglement distribution links. While pioneering demonstrations have established the feasibility of such links, the transition to operational infrastructure demands the validation of robust, integrated space-to-ground architectures. Here, we report on a free-space Quantum Key Distribution experiment conducted over a 1.8 km free-space link using an engineering model of the quantum payload onboard the SpeQtre satellite and the Abu Dhabi Quantum Optical Ground Station. By implementing a BBM92 protocol with polarization-entangled photons, a secret key rate of approximately 7.56 kbps with a mean quantum bit error rate of 4.78%+-0.24% was produced. The deployed system featured spectral and spatial filtering approaches identical to those in the space segment, thus validating the link budget and background rejection capabilities under realistic atmospheric conditions. These results confirm the operational compatibility between the ground and space segments, establishing a critical performance baseline for the SpeQtre mission and future space-based, large-scale quantum networks.

quant-ph

Entanglement demonstration on board a nano-satellite

Global quantum networks for secure communication can be realised using large fleets of satellites distributing entangled photon-pairs between ground-based nodes. Because the cost of a satellite depends on its size, the smallest satellites will be most cost-effective. This paper describes a miniaturised, polarization entangled, photon-pair source operating on board a nano-satellite. The source violates Bell's inequality with a CHSH parameter of 2.6 $\pm$ 0.06. This source can be combined with optical link technologies to enable future quantum communication nano-satellite missions.

quant-ph

Thermo-mechanical design for a miniaturized quantum light source on board the SpooQy-1 CubeSat

This paper presents the thermo-mechanical design of the quantum light source on board SpooQy-1, a 3U CubeSat that was deployed from the International Space Station on 17th June 2019. SpooQy-1 is a technology demonstrator for space-based quantum networks. The on-board light source generates and detects polarization-entangled photon pairs to validate its in-orbit performance. Entangled photons are generated using spontaneous parametric down-conversion (SPDC) necessitating stringent dimensional stability and temperature requirements. Under laboratory conditions these requirements are routinely met using off-the-shelf laboratory mounts and alignment mechanisms. However, when facing harsh environments such as the vibration during rocket launch or temperature changes due to fluctuating illumination conditions, custom thermo-mechanical solutions are required. In this work, the development and in-orbit demonstration of an isostatic payload mount is discussed. This mounting approach enables future space missions with quantum instruments on resource-constrained CubeSat platforms with limited thermal control capabilities.

physics.app-ph

Broadband pumped polarization entangled photon-pair source in a linear beam displacement interferometer

We experimentally demonstrate a source of polarization entangled photon-pairs based on a single periodically-poled potassium titanyl phosphate (PPKTP) crystal pumped with a broadband, free running laser diode.The crystal is placed within a linear beam-displacement interferometer, and emits photon-pairs based ontype-0 spontaneous parametric downconversion (SPDC). We observe pair rates of 0.56 Mpairs/s/mW in a single spatial mode with a polarization visibility of 97.7% over a spectral range of 100 nm. This experiment demonstrates a pathway towards observing Gigacount rates of polarization entangled photon pairs by using high-power free-running laser diodes with fast multiplexed detectors.

quant-ph

Enhancing SPDC brightness using elliptical pump shapes

We report on the use of elliptical pump spatial modes to increase the observed brightness of spontaneous parametric downconversion in critically phase matched crystals. Simulations qualitatively predict this improvement which depends on the eccentricity and orientation of the pump ellipse. We experimentally confirm a factor of two improvement in brightness when compared to the traditional circular-symmetric pump spatial modes. These results support previous theoretical work that proposes the use of elliptical pump modes to enhance the performance of parametric processes in anisotropic materials.

physics.optics

High fidelity field stop collection for polarization-entangled photon pair sources

We present an experimental demonstration of a bright and high fidelity polarization entangled photon pair source. The source is constructed using two critically phase matched $β$-Barium Borate crystals with parallel optical axes and photon pairs are collected after filtering with a circular field-stop. Near unity fidelities are obtained with detected pair rates exceeding \SI{100000}{pairs/\s/\mW} approaching the brightness of practical quasi-phase matched entangled photon sources. We find that the brightness scales linearly with the crystal length. We present models supporting the experimental data and propose strategies for further improvement. The source design is a promising candidate for emerging quantum applications outside of laboratory environments.

quant-ph

Generating entangled photon pairs in a parallel crystal geometry

We present recent findings towards developing brighter entangled photon sources in critically phase matched (CPM) nonlinear crystals. Specifically, we use type-I collinear phase matching at non-degenerate wavelengths in parallel \b{eta}-Barium Borate (BBO) crystals to generate pairs of polarization entangled photons for free-space quantum key distribution (QKD). We first review the entangled source configuration and then discuss ways to further improve the source brightness by means of tailoring the pump and collection modes. We present preliminary results that may lead to brighter entangled photon sources that are intrinsically robust to changes in their environment.

quant-ph

Experimental entangled photon pair generation using crystals with parallel optical axes

We present an optical design where polarization-entangled photon pairs are generated within two $β$-Barium Borate crystals whose optical axes are parallel. This design increases the spatial mode overlap of the emitted photon pairs enhancing single mode collection without the need for additional spatial walk-off compensators. The observed photon pair rate is at least 65000 pairs/s/mW with a quantum state fidelity of 99.53$\pm$0.22% when pumped with an elliptical spatial profile.

quant-ph