arXiv subjects

Akarsh Prabhakara

Publications and source records attributed to Akarsh Prabhakara.

9 recordsLinked to original sources

arXiv2026

RadarSim: Simulating Single-Chip Radar via Multimodal Neural Fields

Radars are an ideal complement to cameras: both are inexpensive, solid-state sensors, with cameras offering fine angular resolution, while radars provide metric depth and robustness under adverse weather. However, radar data is more difficult to interpret than camera images and varies significantly between sensors, necessitating increased reliance on simulation for prototyping sensors and processing pipelines. Recent work treating radar reconstruction as a novel view synthesis problem has shown great promise in reconstructing radar-relevant geometry and simulating low-level radar data. However, such methods are constrained by the low spatial resolution of the underlying radar. To address this, we propose a unified differentiable renderer, RadarSim, which leverages the high angular resolution of RGB cameras to generate Doppler radar range images from a camera-initialized neural field. Using a novel data set of calibrated radar camera recordings from a custom hand-held rig, we demonstrate that RadarSim produces sharper geometry and Doppler range frames than radar-only reconstructions.

cs.CV↗

arXiv2026

Ghosts in the Point Clouds: De-glaring LiDAR in the Transient Domain

Modern LiDARs are rapidly transitioning from bulky, mechanically scanned systems to ultra-compact, low-cost, solid-state arrays. This miniaturization-while enabling scalability, affordability, and camera-like data structures-introduces a new and severe failure mode: internal-multipath glare. When light from a bright or retroreflective surface reflects and scatters within the LiDAR, light that should reach a single pixel spreads across the pixel array. The resulting artifacts create phantom objects, obscure real ones, and produce safety-critical "ghosts in the point clouds." This paper introduces a physically grounded sensing model and algorithmic techniques for addressing this effect. We show that internal glare can be represented as a linear, scene-independent operator-the Transient Glare Spread Function (TGSF)-acting on the transient measurements. Building on this model, we develop a training-free approach that operates on low-level LiDAR detections (or echoes) prior to point-cloud formation, leveraging knowledge of the glare spread function to reason about the likelihood of each detection arising from glare. The resulting approach is compatible with existing LiDAR signal-processing pipelines, and deployable on unmodified commercial sensors. Using experiments with real single-photon LiDAR hardware, we demonstrate substantial suppression of severe glare artifacts while preserving true scene structure.

cs.CV↗

arXiv2025

Privacy-Aware Sharing of Raw Spatial Sensor Data for Cooperative Perception

Cooperative perception between vehicles is poised to offer robust and reliable scene understanding. Recently, we are witnessing experimental systems research building testbeds that share raw spatial sensor data for cooperative perception. While there has been a marked improvement in accuracies and is the natural way forward, we take a moment to consider the problems with such an approach for eventual adoption by automakers. In this paper, we first argue that new forms of privacy concerns arise and discourage stakeholders to share raw sensor data. Next, we present SHARP, a research framework to minimize privacy leakage and drive stakeholders towards the ambitious goal of raw data based cooperative perception. Finally, we discuss open questions for networked systems, mobile computing, perception researchers, industry and government in realizing our proposed framework.

cs.NI↗

arXiv2025

Measuring multi-site pulse transit time with an AI-enabled mmWave radar

Pulse Transit Time (PTT) is a measure of arterial stiffness and a physiological marker associated with cardiovascular function, with an inverse relationship to diastolic blood pressure (DBP). We present the first AI-enabled mmWave system for contactless multi-site PTT measurement using a single radar. By leveraging radar beamforming and deep learning algorithms our system simultaneously measures PTT and estimates diastolic blood pressure at multiple sites. The system was evaluated across three physiological pathways - heart-to-radial artery, heart-to-carotid artery, and mastoid area-to-radial artery -- achieving correlation coefficients of 0.73-0.89 compared to contact-based reference sensors for measuring PTT. Furthermore, the system demonstrated correlation coefficients of 0.90-0.92 for estimating DBP, and achieved a mean error of -1.00-0.62 mmHg and standard deviation of 4.97-5.70 mmHg, meeting the FDA's AAMI guidelines for non-invasive blood pressure monitors. These results suggest that our proposed system has the potential to provide a non-invasive measure of cardiovascular health across multiple regions of the body.

physics.med-ph↗

arXiv2025

Millimeter Wave Inverse Pinhole Imaging

Millimeter wave (mmWave) radars are popular for perception in vision-denied contexts due to their compact size. This paper explores emerging use-cases that involve static mount or momentarily-static compact radars, for example, a hovering drone. The key challenge with static compact radars is that their limited form-factor also limits their angular resolution. This paper presents Umbra, a mmWave high resolution imaging system, that introduces the concept of rotating mmWave "inverse pinholes" for angular resolution enhancement. We present the imaging system model, design, and evaluation of mmWave inverse pinholes. The inverse pinhole is attractive for its lightweight nature, which enables low-power rotation, upgrading static-mount radars. We also show how propellers in aerial vehicles act as natural inverse pinholes and can enjoy the benefits of high-resolution imaging even while they are momentarily static, e.g., hovering. Our evaluation shows Umbra resolving up to 2.5$^{\circ}$ with just a single antenna, a 5$\times$ improvement compared to 14$^{\circ}$ from a compact mmWave radar baseline.

eess.IV↗

arXiv2025

Towards Foundational Models for Single-Chip Radar

mmWave radars are compact, inexpensive, and durable sensors that are robust to occlusions and work regardless of environmental conditions, such as weather and darkness. However, this comes at the cost of poor angular resolution, especially for inexpensive single-chip radars, which are typically used in automotive and indoor sensing applications. Although many have proposed learning-based methods to mitigate this weakness, no standardized foundational models or large datasets for the mmWave radar have emerged, and practitioners have largely trained task-specific models from scratch using relatively small datasets. In this paper, we collect (to our knowledge) the largest available raw radar dataset with 1M samples (29 hours) and train a foundational model for 4D single-chip radar, which can predict 3D occupancy and semantic segmentation with quality that is typically only possible with much higher resolution sensors. We demonstrate that our Generalizable Radar Transformer (GRT) generalizes across diverse settings, can be fine-tuned for different tasks, and shows logarithmic data scaling of 20\% per $10\times$ data. We also run extensive ablations on common design decisions, and find that using raw radar data significantly outperforms widely-used lossy representations, equivalent to a $10\times$ increase in training data. Finally, we roughly estimate that $\approx$100M samples (3000 hours) of data are required to fully exploit the potential of GRT.

cs.CV↗

arXiv2024

DART: Implicit Doppler Tomography for Radar Novel View Synthesis

Simulation is an invaluable tool for radio-frequency system designers that enables rapid prototyping of various algorithms for imaging, target detection, classification, and tracking. However, simulating realistic radar scans is a challenging task that requires an accurate model of the scene, radio frequency material properties, and a corresponding radar synthesis function. Rather than specifying these models explicitly, we propose DART - Doppler Aided Radar Tomography, a Neural Radiance Field-inspired method which uses radar-specific physics to create a reflectance and transmittance-based rendering pipeline for range-Doppler images. We then evaluate DART by constructing a custom data collection platform and collecting a novel radar dataset together with accurate position and instantaneous velocity measurements from lidar-based localization. In comparison to state-of-the-art baselines, DART synthesizes superior radar range-Doppler images from novel views across all datasets and additionally can be used to generate high quality tomographic images.

cs.CV↗

arXiv2023

High Resolution Point Clouds from mmWave Radar

This paper explores a machine learning approach for generating high resolution point clouds from a single-chip mmWave radar. Unlike lidar and vision-based systems, mmWave radar can operate in harsh environments and see through occlusions like smoke, fog, and dust. Unfortunately, current mmWave processing techniques offer poor spatial resolution compared to lidar point clouds. This paper presents RadarHD, an end-to-end neural network that constructs lidar-like point clouds from low resolution radar input. Enhancing radar images is challenging due to the presence of specular and spurious reflections. Radar data also doesn't map well to traditional image processing techniques due to the signal's sinc-like spreading pattern. We overcome these challenges by training RadarHD on a large volume of raw I/Q radar data paired with lidar point clouds across diverse indoor settings. Our experiments show the ability to generate rich point clouds even in scenes unobserved during training and in the presence of heavy smoke occlusion. Further, RadarHD's point clouds are high-quality enough to work with existing lidar odometry and mapping workflows.

cs.RO↗

arXiv2022

A Hybrid mmWave and Camera System for Long-Range Depth Imaging

mmWave radars offer excellent depth resolution even at very long ranges owing to their high bandwidth. But their angular resolution is at least an order-of-magnitude worse than camera and lidar systems. Hence, mmWave radar is not a capable 3-D imaging solution in isolation. We propose Metamoran, a system that combines the complimentary strengths of radar and camera to obtain accurate, high resolution depth images over long ranges even in high clutter environments, all from a single fixed vantage point. Metamoran enables rich long-range depth imaging with applications in security and surveillance, roadside safety infrastructure and wide-area mapping. Our approach leverages the high angular resolution from cameras using computer vision techniques, including image segmentation and monocular depth estimation, to obtain object shape. Our core contribution is a method to convert this object shape into an RF I/Q equivalent, which we use in a novel radar processing pipeline to help declutter the scene and capture extremely weak reflections from objects at long distances. We perform a detailed evaluation of Metamoran's depth imaging capabilities in 400 diverse scenes. Our evaluation shows that Metamoran estimates the depth of static objects up to 90 m and moving objects up to 305 m and with a median error of 28 cm, an improvement of 13$\times$ compared to a naive radar+camera baseline and 23$\times$ compared to monocular depth estimation.

cs.CV↗