arXiv subjects

Akihisa Tomita

Publications and source records attributed to Akihisa Tomita.

At least 19 recordsLinked to original sources

arXiv2026

Electromagnetic Side-Channel Vulnerability in QKD Equipment

Actual quantum key distribution network nodes may be vulnerable to side-channel attacks such as electromagnetic leakage. In this study, we measured electromagnetic emissions from a prototype quantum key distribution device implementing a time-bin decoy-state BB84 protocol with Y and Z bases. We measured the electromagnetic spectra and waveforms at distances of 0 m and 3 m from the transmitter and receiver inside an anechoic chamber. The results showed that the transmitter was the primary source of electromagnetic leakage, and distinct differences were observed between the quantum states generated at the third harmonic of the 1241.6 MHz clock.

quant-ph↗

arXiv2026

Hong-Ou-Mandel test to verify indistinguishability of the states emitted from a quantum key distribution transmitter implementing decoy Bennett-Brassard 1984 protocol

Quantum Key Distribution (QKD) systems require rigorous verification of device properties to ensure implementation security. A critical requirement is the indistinguishability of transmitted pulses encoded by different modulation patterns, as distinguishability through non-encoded degrees of freedom could enable undetected eavesdropping. We present a practical method for testing pulse indistinguishability in QKD transmitters based on Hong-Ou-Mandel (HOM) interference. We establish the theoretical equivalence between the SWAP test and HOM measurement for characterizing quantum state fidelity, demonstrating that HOM visibility directly relates to the trace of density matrix products for phase-randomized weak coherent pulses. We experimentally validated this approach using a high-speed QKD transmitter implementing the decoy BB84 protocol with time-bin encoding at 1.25 GHz. HOM interference was measured between adjacent pulses prepared in different Bennett-Brassard 1984 states (X0, X1, Y0, Y1) using superconducting nanowire single-photon detectors. The observed HOM visibility was approximately 0.3 across all state combinations, with no statistically significant differences detected. These results confirm that modulation does not compromise pulse indistinguishability in our transmitter. The HOM test provides a practical, quantum-optical method for security certification of QKD systems without requiring assumptions about specific degrees of freedom, using only standard fiber-optic components and single-photon detectors.

quant-ph↗

arXiv2025

Linear optical quantum computing with a hybrid squeezed cat code

In recent years, squeezed cat codes with resilience to specific types of loss have been proposed as a step toward realizing fault-tolerant optical quantum computers. However, error correction for squeezed cat codes requires a strong nonlinearity, which makes its implementation challenging with current technology. We propose a novel hybrid code that combines the squeezed cat code and the polarization qubit. First, we propose a generation method and a universal gate set that can be implemented with a linear optical system. Then, we show the superiority of the hybrid squeezed cat code over the hybrid cat code and the squeezed cat code through numerical simulations. These results demonstrate that the hybrid squeezed cat code is a promising candidate as a new resource for optical quantum information processing.

quant-ph↗

arXiv2024

Disturbance Evaluation Circuit in Quantum Measurement

According to the uncertainty principle, every quantum measurement accompanies disturbance. In particular, accurate sequential measurements need the accurate control of disturbance. However, the correct role of disturbance in the uncertainty principle has been known only recently. Understanding the disturbance is crucial for understanding the fundamentals of physics, and accurately evaluating the disturbance is important for quantum technologies such as quantum information processing and quantum metrology. Therefore, the experimental evaluation of the disturbance is a significant challenge in those fields. In this study, we propose a novel evaluation method for the quantum root-mean-square (QRMS) disturbance and compare its performance with the existing approaches, known as the three-state method (TSM) and the weak measurement method (WMM). Our method establishes a correspondence between the QRMS disturbance of the measurement and the second-order derivative of the decoherence induced in a newly introduced weak probe system with respect to the coupling strength of the weak interaction at its zero-limit. Furthermore, we demonstrate the effectiveness of our method in comparison with the other two through a simulation and experiment using a quantum computer. The results capture the key features of the TSM, WMM, and our method, providing insights into the strengths and limitations of these methods.

quant-ph↗

arXiv2024

A unified view of direct measurement of quantum states, processes, and measurements

The dynamics of a quantum system are characterized by three components: quantum state, quantum process, and quantum measurement. The proper measurement of these components is a crucial issue in quantum information processing. Recently, direct measurement methods have been proposed and demonstrated wherein each complex matrix element of these three components is obtained separately, without the need for quantum tomography of the entire matrix. Since these direct measurement methods have been proposed independently, no theoretical framework has been presented to unify them despite the time symmetry of quantum dynamics. In this study, we propose a theoretical framework to systematically derive direct measurement methods for these three components. Following this framework and further utilizing the basis-shift unitary transformation, we have derived the most efficient direct measurement method using qubit probes. Additionally, we have experimentally demonstrated the feasibility of the direct measurement method of quantum states using optical pulse trains.

quant-ph↗

arXiv2021

Complex counterpart of variance in quantum measurements for pre- and post-selected systems

The variance of an observable in a pre-selected quantum system, which is always real and non-negative, appears as an increase in the probe wave packet width in indirect measurements. Extending this framework to pre- and post-selected systems, we formulate a complex-valued counterpart of the variance called "weak variance." In our formulation, the real and imaginary parts of the weak variance appear as changes in the probe wave packet width in the vertical-horizontal and diagonal-antidiagonal directions, respectively, on the quadrature phase plane. Using an optical system, we experimentally demonstrate these changes in the probe wave packet width caused by the real negative and purely imaginary weak variances. Furthermore, we show that the weak variance can be expressed as the variance of the weak-valued probability distribution in pre- and post-selected systems. These operational and statistical interpretations support the rationality of formulating the weak variance as a complex counterpart of the variance in pre- and post-selected systems.

quant-ph↗

arXiv2021

Direct measurement of ultrafast temporal wavefunctions

The large capacity and robustness of information encoding in the temporal mode of photons is important in quantum information processing, in which characterizing temporal quantum states with high usability and time resolution is essential. We propose and demonstrate a direct measurement method of temporal complex wavefunctions for weak light at a single-photon level with subpicosecond time resolution. Our direct measurement is realized by ultrafast metrology of the interference between the light under test and self-generated monochromatic reference light; no external reference light or complicated post-processing algorithms are required. Hence, this method is versatile and potentially widely applicable for temporal state characterization.

quant-ph↗

arXiv2019

Operational formulation of weak values without probe systems

Weak values are the fundamental values for observables in a pre- and post-selected system. Weak values are typically measured by weak measurement, in which weak values appear in the change of not the pre- and post-selected system but the probe system. This indirect characteristic of weak measurement obscures the meaning of weak values for the pre- and post-selected system, in contrast to conventional physical quantities, which have a clear operational meaning. In this study, we operationally formulate weak values as the sensitivity of post-selection probability amplitude to small transformation in a pre- and post-selected system. This formulation of weak values, which is free from the concept of probe shift assumed in weak measurement, gives a direct interpretation of strange weak values for the pre- and post-selected system. We further explain that this formulation can simplify weak-value measurement experiments because no probe system is required.

quant-ph↗

arXiv2018

A framework for measuring weak values without weak interactions and its diagrammatic representation

Weak values are typically obtained experimentally by performing weak measurements, which involve weak interactions between the measured system and a probe. However, the determination of weak values does not necessarily require weak measurements, and several methods without weak system-probe interactions have been developed previously. In this work, a framework for measuring weak values is proposed to describe the relationship between various weak measurement techniques in a unified manner. This framework, which uses a probe-controlled system transformation instead of the weak system-probe interaction, improves the understanding of the currently used weak value measurement methods. Furthermore, a diagrammatic representation of the proposed framework is introduced to intuitively identify the complex values obtained in each measurement system. By using this diagram, a new method for measuring weak values with a desired function can be systematically derived. As an example, a scan-free and more efficient direct measurement method of wavefunctions than the conventional techniques using weak measurements is developed.

quant-ph↗

arXiv2018

Tracking Quantum Error Correction

To implement fault-tolerant quantum computation with continuous variables, the Gottesman--Kitaev--Preskill (GKP) qubit has been recognized as an important technological element. We have proposed a method to reduce the required squeezing level to realize large scale quantum computation with the GKP qubit [Phys. Rev. X. {\bf 8}, 021054 (2018)], harnessing the virtue of analog information in the GKP qubits. In the present work, to reduce the number of qubits required for large scale quantum computation, we propose the tracking quantum error correction, where the logical-qubit level quantum error correction is partially substituted by the single-qubit level quantum error correction. In the proposed method, the analog quantum error correction is utilized to make the performances of the single-qubit level quantum error correction almost identical to those of the logical-qubit level quantum error correction in a practical noise level. The numerical results show that the proposed tracking quantum error correction reduces the number of qubits during a quantum error correction process by the reduction rate $\left\{{2(n-1)\times4^{l-1}-n+1}\right\}/({2n \times 4^{l-1}})$ for $n$-cycles of the quantum error correction process using the Knill's $C_{4}/C_{6}$ code with the concatenation level $l$. Hence, the proposed tracking quantum error correction has great advantage in reducing the required number of physical qubits, and will open a new way to bring up advantage of the GKP qubits in practical quantum computation.

quant-ph↗

arXiv2018

High-threshold fault-tolerant quantum computation with analog quantum error correction

To implement fault-tolerant quantum computation with continuous variables, the Gottesman-Kitaev-Preskill (GKP) qubit has been recognized as an important technological element. However,it is still challenging to experimentally generate the GKP qubit with the required squeezing level, 14.8 dB, of the existing fault-tolerant quantum computation. To reduce this requirement, we propose a high-threshold fault-tolerant quantum computation with GKP qubits using topologically protected measurement-based quantum computation with the surface code. By harnessing analog information contained in the GKP qubits, we apply analog quantum error correction to the surface code.Furthermore, we develop a method to prevent the squeezing level from decreasing during the construction of the large scale cluster states for the topologically protected measurement based quantum computation. We numerically show that the required squeezing level can be relaxed to less than 10 dB, which is within the reach of the current experimental technology. Hence, this work can considerably alleviate this experimental requirement and take a step closer to the realization of large scale quantum computation.

quant-ph↗

arXiv2018

Quantum key distribution with an efficient countermeasure against correlated intensity fluctuations in optical pulses

Quantum key distribution (QKD) allows two distant parties to share secret keys with the proven security even in the presence of an eavesdropper with unbounded computational power. Recently, GHz-clock decoy QKD systems have been realized by employing ultrafast optical communication devices. However, security loopholes of high-speed systems have not been fully explored yet. Here we point out a security loophole at the transmitter of the GHz-clock QKD, which is a common problem in high-speed QKD systems using practical band-width limited devices. We experimentally observe the inter-pulse intensity correlation and modulation-pattern dependent intensity deviation in a practical high-speed QKD system. Such correlation violates the assumption of most security theories. We also provide its countermeasure which does not require significant changes of hardware and can generate keys secure over 100 km fiber transmission. Our countermeasure is simple, effective and applicable to wide range of high-speed QKD systems, and thus paves the way to realize ultrafast and security-certified commercial QKD systems.

quant-ph↗

arXiv2017

Analog quantum error correction with encoding a qubit into an oscillator

To implement fault-tolerant quantum computation with continuous variables, Gottesman-Kitaev-Preskill (GKP) qubits have been recognized as an important technological element. However, the analog outcome of GKP qubits, which includes beneficial information to improve the error tolerance, has been wasted, because the GKP qubits have been treated as only discrete variables. In this paper, we propose a hybrid quantum error correction approach that combines digital information with the analog information of the GKP qubits using the maximum-likelihood method. As an example, we demonstrate that the three-qubit bit-flip code can correct double errors, whereas the conventional method based on majority voting on the binary measurement outcome can correct only a single error. As another example, a concatenated code known as Knill's C4/C6 code can achieve the hashing bound for the quantum capacity of the Gaussian quantum channel. To the best of our knowledge, this approach is the first attempt to draw both digital and analog information from a single quantum state to improve quantum error correction performance.

quant-ph↗

arXiv2017

Classical reconstruction of interference patterns of position-wavevector-entangled photon pairs by time-reversal method

The quantum interference of entangled photons forms a key phenomenon underlying various quantum-optical technologies. It is known that the quantum interference patterns of entangled photon pairs can be reconstructed classically by the time-reversal method; however, the time-reversal method has been applied only to time-frequency-entangled two-photon systems in previous experiments. Here, for the first time, we apply the time-reversal method to the position-wavevector-entangled two-photon systems: the two-photon Young interferometer and the two-photon beam focusing system. We experimentally demonstrate that the time-reversed systems classically reconstruct the same interference patterns as the position-wavevector-entangled two-photon systems.

quant-ph↗

arXiv2017

Generation of phase-squeezed optical pulses with large coherent amplitudes by post-selection of single photon and weak cross-Kerr non-linearity

Phase-squeezed light can enhance the precision of optical phase estimation. The larger the photon numbers are and the stronger the squeezing is, the better the precision will be. We propose an experimental scheme for generating phase-squeezed light pulses with large coherent amplitudes. In our scheme, one arm of a single-photon Mach-Zehnder interferometer interacts with coherent light via a non-linear optical Kerr medium to generate a coherent superposition state. Post-selecting the single photon by properly tuning a variable beam splitter in the interferometer yields a phase-squeezed output.

quant-ph↗

arXiv2015

Entanglement Generation by Communication using Phase-Squeezed Light with Photon Loss

In order to implement fault-tolerant quantum computation, entanglement generation with low error probability and high success probability is required. We have proposed the use of squeezed coherent light as a probe to generate entanglement between two atoms by communication, and shown that the error probability is reduced well below the threshold of fault-tolerant quantum computation [Phys. Rev. A. {\bf 88}, 022313 (2013)]. Here, we investigate the effect of photon loss mainly due to finite coupling efficiency to the cavity. The error probability with the photon loss is calculated by the beam-splitter model for homodyne measurement on probe light. Optimum condition on the amplitude of probe light to minimize the error probability is examined. It is shown that the phase-squeezed probe light yields lower error probability than coherent-light probe. A fault-tolerant quantum computation algorithm can be implemented under 0.59 dB loss by concatenating five-qubit error correction code.

quant-ph↗

arXiv2015

Modified E91 protocol demonstration with hybrid entanglement photon source

We report on an experimental demonstration of the modified Ekert 91 protocol of quantum key distribution using a hybrid entanglement source with two different degrees of freedoms, a 1550 nm time-bin qubit and 810 nm polarization qubit. The violation of the Clauser-Horne-Shimony-Holt inequality could be demonstrated for the entanglement between the polarization qubit in free space and the time-bin qubit through 20 km fiber transmission. The secure key rate in our system is estimated 70-150 bps.

quant-ph↗

arXiv2014

Evaluation of the phase randomness of the light source in quantum key distribution systems with an attenuated laser

The phase randomized light is one of the key assumptions in the security proof of Bennett-Brassard 1984 (BB84) quantum key distribution (QKD) protocol implemented with an attenuated laser. Though the assumption has been believed to be satisfied for conventional systems, it should be reexamined for current high speed QKD systems. The phase correlation may be induced by the overlap of the optical pulses, the interval of which decreases as the clock frequency. The phase randomness was investigated experimentally by measuring the visibility of interference. An asymmetric Mach-Zehnder interferometer was used to observe the interference between adjacent pulses from a gain-switched distributed feedback laser diode driven at 10 GHz. Low visibility was observed when the minimum drive current was set far below the threshold, while the interference emerged when the minimum drive current was close to the threshold. Theoretical evaluation on the impact of the imperfect phase randomization provides target values for the visibility to guarantee the phase randomness. The experimental and theoretical results show that secure implementation of decoy BB84 protocol is achievable even for the 10-GHz clock frequency, by using the laser diode under proper operating conditions.

quant-ph↗