arXiv subjects

Akimitsu Narita

Publications and source records attributed to Akimitsu Narita.

At least 19 recordsLinked to original sources

arXiv2026

One-dimensional carbon nanostructures with periodic graphitic nitrogen substitution

Heteroatom substitution is a powerful route to tune the chemical and electronic properties of carbon nanomaterials. In particular, replacement of an sp2 hybridized carbon atom in the graphene lattice with a nitrogen atom (denoted as graphitic nitrogen) induces substantial changes in the electronic properties. These include changes in the band structure that can influence electronic transport, and magnetism. A key requirement for applications is both the periodic and precise incorporation of the heteroatoms in extended carbon lattices. Here, we report the on-surface synthesis and characterization of two one dimensional carbon nanostructures, a polymer and a graphene nanoribbon, consisting of periodically incorporated graphitic nitrogen atoms. The on-surface reactions toward formation of the nanostructures were monitored by scanning tunneling microscopy. The bond-resolved chemical structures of the reaction intermediates and products were investigated by atomic force microscopy, which enabled atomic-scale visualization of the graphitic nitrogen sites. The electronic properties of the nanostructures were studied by scanning tunneling spectroscopy and density functional theory calculations. Our analyses revealed the presence of localized nitrogen-centered electronic states. In the gas phase where the nanostructures are in a neutral charge state, these states undergo spin polarization leading to an open-shell ground state. Upon adsorption on Au(111), the nanostructures exhibit electron transfer to the surface, which resulted in a closed-shell ground state. Our results demonstrate a straightforward and generally applicable route to synthesize graphitic nitrogen-substituted carbon nanomaterials with potential applications in spintronics, catalysis and energy storage.

cond-mat.mes-hall↗

arXiv2025

Optimized Synthesis and Device Integration of Long 17-Atom-Wide Armchair Graphene Nanoribbons

Seventeen-carbon-atom-wide armchair graphene nanoribbons (17-AGNRs) are promising candidates for high-performance electronic devices due to their narrow electronic bandgap. Atomic precision in edge structure and width control is achieved through a bottom-up on-surface synthesis (OSS) approach from tailored molecular precursors in ultra-high vacuum (UHV). This synthetic protocol must be optimized to meet the structural requirements for device integration, with ribbon length being the most critical parameter. Here, we report optimized OSS conditions that produce 17-AGNRs with an average length of approximately 17 nm. This length enhancement is achieved through a gradual temperature ramping during an extended annealing period, combined with a template-like effect driven by monomer assembly at high surface coverage. The resulting 17-AGNRs are comprehensively characterized in UHV using scanning probe techniques and Raman spectroscopy. Raman measurements following substrate transfer enabled the characterization of the length distribution of GNRs on the device substrate and confirmed their stability under ambient conditions and harsh chemical environments, including acid vapors and etchants. The increased length and ambient stability of the 17-AGNRs lead to their reliable integration into device architectures. As a proof of concept, we integrate 17-AGNRs into field-effect transistors (FET) with graphene electrodes and confirm that electronic transport occurs through the GNRs. This work demonstrates the feasibility of integrating narrow-bandgap GNRs into functional devices and contributes to advancing the development of carbon-based nanoelectronics.

cond-mat.mes-hall↗

arXiv2025

Magnetic ground state discrimination of a Polyradical Nanog-raphene using Nickelocene-Functionalized Tips

Molecular magnets are a promising class of materials with exciting properties and applications. However, a profound understanding and application of such materials depends on the accurate detection of their electronic and magnetic properties. Despite the availability of experimental techniques that can sense the magnetic signal, the exact determination of the spin ground states and spatial distribution of exchange interaction of strongly correlated single-molecule magnets remains challenging. Here, we demonstrate that scanning probe microscopy with a nickelocene-functionalized probe can distinguish between nearly degenerate multireference ground states of single-molecule π-magnets and map their spatial distribution of the exchange interaction. This method expands the already outstanding imaging capabilities of scanning probe microscopy for characterizing the chemical and electronic structures of individual molecules, paving the way for the study of strongly correlated molecular magnets with unprecedented spatial resolution.

cond-mat.mtrl-sci↗

arXiv2024

Disruptive Forces in Metamaterial Tweezers for Trapping 20 nm Nanoparticles Based on Molecular Graphene Quantum Dots

In recent years, plasmonic optical tweezers have been used to trap nanoparticles and study interactions with their environment. An unavoidable challenge is the plasmonic heating due to resonant excitation and the resulting temperature rise in the surrounding environment. In this work, we demonstrate trapping of custom-synthesized 20 nm nanoparticles based on molecular graphene quantum dots using metamaterial plasmonic tweezers. Superior trap stiffness values as high as 8.8 (fN/nm)/(mW/$μ\mbox{m}^2$) were achieved with optical intensities lower than 1 mW/$μ\mbox{m}^2$. By gradually increasing the laser intensity we identified a critical value beyond which the stiffness values dropped significantly. This value corresponded to a temperature rise of about 16$^o$C, evidently sufficient to create thermal flows and disrupt the trapping performance. We, therefore, identified a safe intensity regime for trapping nanoparticles without unwanted heat. Our platform can be used for efficient nanopositioning of fluorescent particles and quantum emitters in an array configuration, potentially acting as a single-photon source configuration.

physics.optics↗

arXiv2024

Advancing single-atom catalysts: engineered metal-organic platforms on surfaces

Recent advances in nanomaterials have pushed the boundaries of nanoscale fabrication to the limit of single atoms (SAs), particularly in heterogeneous catalysis. Single atom catalysts (SACs), comprising minute amounts of transition metals dispersed on inert substrates, have emerged as prominent materials in this domain. However, overcoming the tendency of these SAs to cluster beyond cryogenic temperatures and precisely arranging them on surfaces pose significant challenges. Employing organic templates for orchestrating and modulating the activity of single atoms holds promise. Here, we introduce a novel single atom platform (SAP) wherein atoms are firmly anchored to specific coordination sites distributed along carbon-based polymers, synthesized via on-surface synthesis (OSS). These SAPs exhibit atomiclevel structural precision and stability, even at elevated temperatures. The asymmetry in the electronic states at the active sites anticipates the enhanced reactivity of these precisely defined reactive centers. Upon exposure to CO and CO2 gases at low temperatures, the SAP demonstrates excellent trapping capabilities. Fine-tuning the structure and properties of the coordination sites offers unparalleled flexibility in tailoring functionalities, thus opening avenues for previously untapped potential in catalytic applications.

cond-mat.mtrl-sci↗

arXiv2024

Thermal spin-crossover and temperature-dependent zero-field splitting in magnetic nanographene chains

Nanographene-based magnetism at interfaces offers an avenue to designer quantum materials towards novel phases of matter and atomic-scale applications. Key to spintronics applications at the nanoscale is bistable spin-crossover which however remains to be demonstrated in nanographenes. Here we show that antiaromatic 1,4-disubstituted pyrazine-embedded nanographene derivatives, which promote magnetism through oxidation to a non-aromatic radical are prototypical models for the study of carbon-based thermal spin-crossover. Scanning tunneling spectroscopy studies reveal symmetric spin excitation signals which evolve at Tc to a zero-energy peak, and are assigned to the transition of a S = 3/2 high-spin to a S = 1/2 low-spin state by density functional theory. At temperatures below and close to the spin-crossover Tc, the high-spin S= 3/2 excitations evidence pronouncedly different temperature-dependent excitation energies corresponding to a zero-field splitting in the Hubbard-Kanamori Hamiltonian. The discovery of thermal spin crossover and temperature-dependent zero-field splitting in carbon nanomaterials promises to accelerate quantum information, spintronics and thermometry at the atomic scale.

physics.chem-ph↗

arXiv2022

Length-independent quantum transport through topological band states of graphene nanoribbons

Atomically precise graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic applications due to their widely tunable energy band gaps resulting from lateral quantum confinement and edge effects. Here we report on the electronic transport characterization of an edge-modified GNR suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate. Differential conductance measurements on this metal-GNR-metal junction reveal loss-less transport properties (inverse decay length $β< 0.001 /\overset{\circ}{\mathrm{A}}$) with high conductance ($\sim 0.1$ G$_0$) at low voltages (50 meV) over long distances ($z > 10$ nm). The transport behavior is sensitive to the coupling between ribbon and electrodes, an effect that is rationalized using tight-binding and density functional theory simulations. From extensive modelling we infer that the length-independent transport is a manifestation of band transport through topological valence states, which originate from the zigzag segments on the GNR edges.

cond-mat.mes-hall↗

arXiv2022

Growth optimization and device integration of narrow-bandgap graphene nanoribbons

The electronic, optical and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, we study the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs), which are expected to have an optimal band gap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultra-high vacuum conditions from Br- and I-substituted precursors. We show that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed us to integrate 5-AGNRs into devices and to realize the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. Our study highlights that optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

cond-mat.mtrl-sci↗

arXiv2022

Scaling and Statistics of Bottom-Up Synthesized Armchair Graphene Nanoribbon Transistors

Bottom-up assembled nanomaterials and nanostructures allow for the studies of rich and unprecedented quantum-related and mesoscopic transport phenomena. However, it can be difficult to quantify the correlations between the geometrical or structural parameters obtained from advanced microscopy and measured electrical characteristics when they are made into macroscopic devices. Here, we propose a strategy to connect the nanomaterial morphologies and the device performance through a Monte Carlo device model and apply it to understand the scaling trends of bottom-up synthesized armchair graphene nanoribbon (GNR) transistors. A new nanofabrication process is developed for GNR transistors with channel length down to 7 nm. The impacts of the GNR spatial distributions and the device geometries on the device performance are investigated systematically through comparison of experimental data with the model. Through this study, challenges and opportunities of transistor technologies based on bottom-up synthesized GNRs are pinpointed, paving the way to the further improvement of the GNR device performance for future transistor technology nodes.

cond-mat.mes-hall↗

arXiv2020

Coupled spin states in armchair graphene nanoribbons with asymmetric zigzag edge extensions

Carbon-based magnetic structures promise significantly longer coherence times than traditional magnetic materials, which is of fundamental importance for spintronic applications. An elegant way of achieving carbon-based magnetic moments is the design of graphene nanostructures with an imbalanced occupation of the two sublattices forming the carbon honeycomb lattice. According to Lieb's theorem, this induces local magnetic moments that are proportional to the sublattice imbalance. Exact positioning of sublattice imbalanced nanostructures in graphene nanomaterials hence offers a route to control interactions between induced local magnetic moments and to obtain graphene nanomaterials with magnetically non-trivial ground states. Here, we show that such sublattice imbalanced nanostructures can be incorporated along a large band gap armchair graphene nanoribbon on the basis of asymmetric zigzag edge extensions, which is achieved by incorporating specifically designed precursor monomers during the bottom-up fabrication of the graphene nanoribbons. Scanning tunneling spectroscopy of an isolated and electronically decoupled zigzag edge extension reveals Hubbard-split states in accordance with theoretical predictions. Investigation of pairs of such zigzag edge extensions reveals ferromagnetic, antiferromagnetic or quenching of the magnetic interactions depending on the relative alignment of the asymmetric edge extensions. Moreover, a ferromagnetic spin chain is demonstrated for a periodic pattern of zigzag edge extensions along the nanoribbon axis. This work opens a route towards the design and fabrication of graphene nanoribbon-based spin chains with complex magnetic ground states.

cond-mat.mes-hall↗

arXiv2020

Giant magnetic exchange coupling in rhombus-shaped nanographenes with zigzag periphery

Nanographenes with zigzag edges are predicted to manifest non-trivial pi-magnetism resulting from the interplay of hybridization of localized frontier states and Coulomb repulsion between valence electrons. This provides a chemically tunable platform to explore quantum magnetism at the nanoscale and opens avenues toward organic spintronics. The magnetic stability in nanographenes is thus far limited by the weak magnetic exchange coupling which remains below the room temperature thermal energy. Here, we report the synthesis of large rhombus-shaped nanographenes with zigzag periphery on gold and copper surfaces. Single-molecule scanning probe measurements unveil an emergent magnetic spin-singlet ground state with increasing nanographene size. The magnetic exchange coupling in the largest nanographene, determined by inelastic electron tunneling spectroscopy, exceeds 100 meV or 1160 K, which outclasses most inorganic nanomaterials and remarkably survives on a metal electrode.

cond-mat.mes-hall↗

arXiv2019

Controlled quantum dot formation in atomically engineered graphene nanoribbons field-effect transistors

Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($<$50 nm), as well as the preservation of their physical properties upon device integration. In this combined experimental and theoretical study, we report on the quantum dot (QD) behavior of atomically precise GNRs integrated in a device geometry. The devices consist of a film of aligned 5-atoms wide GNRs (5-AGNRs) transferred onto graphene electrodes with a sub 5-nm nanogap. We demonstrate that the narrow-bandgap 5-AGNRs exhibit metal-like behavior resulting in linear IV curves for low bias voltages at room temperature and single-electron transistor behavior for temperatures below 150~K. By performing spectroscopy of the molecular levels at 13~K, we obtain addition energies in the range of 200-300 meV. DFT calculations predict comparable addition energies and reveal the presence of two electronic states within the bandgap of infinite ribbons when the finite length of the 5-AGNRs is accounted for. By demonstrating the preservation of the 5-AGNRs electronic properties upon device integration, as demonstrated by transport spectroscopy, our study provides a critical step forward in the realisation of more exotic GNR-based nano-electronic devices.

cond-mat.mes-hall↗

arXiv2019

A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons

Graphene nanoribbons (GNRs) have attracted considerable interest as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characterization. In contrast, Raman spectroscopy is a sensitive method for the characterization of GNRs, in particular for investigating their width and structure. Here, we report on a length-dependent, Raman active low-energy vibrational mode that is present in atomically precise, bottom-up synthesized armchair graphene nanoribbons (AGNRs). Our Raman study demonstrates that this mode is present in all families of AGNRs and provides information on their length. Our spectroscopic findings are corroborated by scanning tunneling microscopy images and supported by first-principles calculations that allow us to attribute this mode to a longitudinal acoustic phonon. Finally, we show that this mode is a sensitive probe for the overall structural integrity of the ribbons and their interaction with technologically relevant substrates.

cond-mat.mes-hall↗

arXiv2019

On-surface synthesis of polyazulene with 2,6-connectivity

Azulene, the smallest neutral nonalternant aromatic hydrocarbon, serves as not only a prototype for fundamental studies but also a versatile building block for functional materials because of its unique opto(electronic) properties. Here, we report the on-surface synthesis and characterization of the homopolymer of azulene connected exclusively at the 2,6-positions using 2,6-diiodoazulene as the monomer precursor. As an intermediate to the formation of polyazulene, a gold-(2,6-azulenylene) chain is observed.

cond-mat.mtrl-sci↗

arXiv2019

On-surface synthesis of antiaromatic and open-shell indeno[2,1-b]fluorene polymers and their lateral fusion into porous ribbons

Polycyclic hydrocarbons have received great attention due to their potential role in organic electronics and, for open-shell systems with unpaired electron densities, in spintronics and da-ta storage. However, the intrinsic instability of polyradical hydrocarbons severely limits de-tailed investigations of their electronic structure. Here, we report the on-surface synthesis of conjugated polymers consisting of indeno[2,1-b]fluorene units, which are antiaromatic and open-shell biradicaloids. The observed reaction products, which also include a non-benzenoid porous ribbon arising from lateral fusion of unprotected indeno[2,1-b]fluorene chains, have been characterized via low temperature scanning tunneling microscopy/spectroscopy and non-contact atomic force microscopy, complemented by density-functional theory calculations. These polymers present a low band gap when adsorbed on Au(111). Moreover, their pro-nounced antiaromaticity and radical character, elucidated by ab initio calculations, make them promising candidates for applications in electronics and spintronics. Further, they provide a rich playground to explore magnetism in low-dimensional organic nanomaterials.

cond-mat.mtrl-sci↗

arXiv2019

Optimized substrates and measurement approaches for Raman spectroscopy of graphene nanoribbons

The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this contribution, we use Raman spectroscopy to characterize different types of GNRs on their growth substrate and to track their quality upon substrate transfer. We present a Raman-optimized (RO) device substrate and an optimized mapping approach that allows for acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO2/Si substrates. We show that this approach is well-suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, we track the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7- and 9-atom wide armchair GNRs (AGNRs) and compare their frequencies with first-principles calculations.

cond-mat.mtrl-sci↗

arXiv2019

Multi-wavelength Raman Spectroscopy of Ultra-narrow Nanoribbons Made by Solution-mediated Bottom-up Approach

Here we present a combined experimental and theoretical study of graphene nanoribbons (GNRs), where detailed multi-wavelength Raman measurements are integrated by accurate ab initio simulations. Our study covers several ultra-narrow GNRs, obtained by means of solution-based bottom-up synthetic approach, allowing to rationalize the effect of edge morphology, position and type of functional groups as well as the length on the GNR Raman spectrum. We show that the low-energy region, especially in presence of bulky functional groups is populated by several modes, and a single radial breathing-like mode cannot be identified. In the Raman optical region, we find that, except for the fully-brominated case, all GNRs functionalized at the edges with different side groups show a characteristic dispersion of the D peak (8-22 cm-1/eV). This has been attributed to the internal degrees of freedom of these functional groups, which act as dispersion-activating defects. The G peak shows small to negligible dispersion in most of the cases, with larger values only in presence of poor control of the edges functionalization, exceeding the values reported for highly defected graphene. In conclusion, we have shown that the characteristic dispersion of the G and D peaks offer further insight on the GNR structure and functionalization, by making Raman spectroscopy an important tool for the characterization of GNRs.

cond-mat.mtrl-sci↗

arXiv2019

Graphene Nanoribbons on Hexagonal Boron Nitride: Deposition and Transport Characterization

Chemically synthesized "cove"-type graphene nanoribbons (cGNRs) of different widths were brought into dispersion and drop-cast onto exfoliated hexagonal boron nitride (hBN) on a Si/SiO2 chip. With AFM we observed that the cGNRs form ordered domains aligned along the crystallographic axes of the hBN. Using electron beam lithography and metallization, we contacted the cGNRs with NiCr/Au, or Pd contacts and measured their I-V-characteristics. The transport through the ribbons was dominated by the Schottky behavior of the contacts between the metal and the ribbon.

cond-mat.mes-hall↗