arXiv subjects

Akira Okumura

Publications and source records attributed to Akira Okumura.

25 records · Page 2Linked to original sources

arXiv2015

ROBAST: Development of a Non-Sequential Ray-Tracing Simulation Library and its Applications in the Cherenkov Telescope Array

We have developed a non-sequential ray-tracing simulation library, ROot-BAsed Simulator for ray Tracing (ROBAST), which is aimed for wide use in optical simulations of cosmic-ray (CR) and gamma-ray telescopes. The library is written in C++ and fully utilizes the geometry library of the ROOT analysis framework. Despite the importance of optics simulations in CR experiments, no open-source software for ray-tracing simulations that can be widely used existed. To reduce the unnecessary effort demanded when different research groups develop multiple ray-tracing simulators, we have successfully used ROBAST for many years to perform optics simulations for the Cherenkov Telescope Array (CTA). Among the proposed telescope designs for CTA, ROBAST is currently being used for three telescopes: a Schwarzschild--Couder telescope, one of the Schwarzschild--Couder small-sized telescopes, and a large-sized telescope (LST). ROBAST is also used for the simulations and the development of hexagonal light concentrators that has been proposed for the LST focal plane. By fully utilizing the ROOT geometry library with additional ROBAST classes, building complex optics geometries that are typically used in CR experiments and ground-based gamma-ray telescopes is possible. We introduce ROBAST and show several successful applications for CTA.

astro-ph.IM↗

arXiv2015

Prototyping of Hexagonal Light Concentrators for the Large-Sized Telescopes of the Cherenkov Telescope Array

Reflective light concentrators with hexagonal entrance and exit apertures are frequently used at the focal plane of gamma-ray telescopes in order to reduce the size of the dead area caused by the geometries of the photodetectors, as well as to reduce the amount of stray light entering at large field angles. The focal plane of the large-sized telescopes (LSTs) of the Cherenkov Telescope Array (CTA) will also be covered by hexagonal light concentrators with an entrance diameter of 50 mm (side to side) to maximize the active area and the photon collection efficiency, enabling realization of a very low energy threshold of 20 GeV. We have developed a prototype of this LST light concentrator with an injection-molded plastic cone and a specular multilayer film. The shape of the plastic cone has been optimized with a cubic Bézier curve and a ray-tracing simulation. We have also developed a multilayer film with very high reflectance ($\gtrsim95$\%) along wide wavelength and angle coverage. The current status of the prototyping of these light concentrators is reported here.

astro-ph.IM↗

arXiv2013

Schwarzschild-Couder telescope for the Cherenkov Telescope Array: Development of the Optical System

The CTA (Cherenkov Telescope Array) is the next generation ground-based experiment for very high-energy (VHE) gamma-ray observations. It will integrate several tens of imaging atmospheric Cherenkov telescopes (IACTs) with different apertures into a single astronomical instrument. The US part of the CTA collaboration has proposed and is developing a novel IACT design with a Schwarzschild-Couder (SC) aplanatic two mirror optical system. In comparison with the traditional single mirror Davies-Cotton IACT the SC telescope, by design, can accommodate a wide field-of-view, with significantly improved imaging resolution. In addition, the reduced plate scale of an SC telescope makes it compatible with highly integrated cameras assembled from silicon photo multipliers. In this submission we report on the status of the development of the SC optical system, which is part of the effort to construct a full-scale prototype telescope of this type at the Fred Lawrence Whipple Observatory in southern Arizona.

astro-ph.IM↗

arXiv2012

Optimization of the Collection Efficiency of a Hexagonal Light Collector using Quadratic and Cubic Bézier Curves

Reflective light collectors with hexagonal entrance and exit apertures are frequently used in front of the focal-plane camera of a very-high-energy gamma-ray telescope to increase the collection efficiency of atmospheric Cherenkov photons and reduce the night-sky background entering at large incident angles. The shape of a hexagonal light collector is usually based on Winston's design, which is optimized for only two-dimensional optical systems. However, it is not known whether a hexagonal Winston cone is optimal for the real three-dimensional optical systems of gamma-ray telescopes. For the first time we optimize the shape of a hexagonal light collector using quadratic and cubic Bézier curves. We demonstrate that our optimized designs simultaneously achieve a higher collection efficiency and background reduction rate than traditional designs.

astro-ph.IM↗

arXiv2011

Development of an ASIC for Dual Mirror Telescopes of the Cherenkov Telescope Array

We have developed an application-specific integrated circui (ASIC) for photomultipler tube (PMT) waveform digitization which is well-suited for the Schwarzschild-Couder optical system under development for the Cherenkov Telescope Array (CTA) project. The key feature of the "TARGET" ASIC is the ability to read 16 channels in parallel at a sampling speed of 1 GSa/s or faster. In combination with a focal plane instrumented with 64-channel multi-anode PMTs (MAPMTs), TARGET digitizers will enable CTA to achieve a wider field of view than the current Cherenkov telescopes and significantly reduce the cost per channel of the camera and readout electronics. We have also developed a prototype camera module, consisting of 4 TARGET ASICs and a 64-channel MAPMT. We report results from performance testing of the camera module and of the TARGET ASIC itself.

astro-ph.IM↗

arXiv2011

Development of Non-sequential Ray-tracing Software for Cosmic-ray Telescopes

We have developed non-sequential ray-tracing software which is aimed to be widely used, along with air- shower simulations, in the design of optical systems for cosmic-ray experiments. The code is based on the ROOT geometry library to provide a non-sequential photon tracking system, which is valuable when simulating refraction and multiple reflections. In addition to the basic ROOT classes, we have implemented new geometry ROOT classes so that users can flexibly define various geometries such as aspherical or Winston-cone type surfaces. We demonstrate the capabilities and performance of the software with examples of optical systems used in current and future experiments.

astro-ph.IM↗

arXiv2010

Diffuse Gamma-ray Observations of the Orion Molecular Clouds

We report on a preliminary analysis of the diffuse gamma-ray observations of local giant molecular clouds Orion A and B with the Large Area Telescope onboard the Fermi Gamma-ray Space Telescope. The gamma-ray emission of the clouds is well explained by hadronic and electromagnetic interactions between cosmic rays and nuclei in the clouds. In consequence, we obtain the total masses of the Orion A and B clouds to be (80.6 +/- 7.5 +/- 4.8) x 10^3 Msun and (39.5 +/- 5.2 +/- 2.6) x 10^3 Msun, respectively, for the distance to the clouds of 400 pc and the Galactic CR spectrum predicted by GALPROP on the local observations of CRs. The structure of molecular clouds have been extensively studied by radio telescopes, especially using the line intensity of CO molecules (WCO) and a constant conversion factor from Wco to N (H_2) (= Xco). However, this factor is found to be significantly different for Orion A and B: 1.76 +/- 0.04 +/- 0.02 and 1.27 +/- 0.06 +/- 0.01, respectively.

astro-ph.HE↗