arXiv subjects

Akshay A. Murthy

Publications and source records attributed to Akshay A. Murthy.

14 recordsLinked to original sources

arXiv2026

Microstructural Topology as a Prescriptor for Quantum Coherence: Towards A Unified Framework for Decoherence in Superconducting Qubits

In superconducting quantum circuits, decoherence improvements are frequently obtained through process interventions that simultaneously modify surface chemistry, microstructural topology, and device geometry, leaving mechanistic attribution structurally underdetermined. Predictive materials engineering requires measurable structural statistics to be separated from geometry-dependent coupling coefficients into independently testable factors. We introduce the concept of classical and quantum microstructure. In that context, we formulate a channel-wise separable framework for decoherence in superconducting transmon qubits in which each loss channel is described by a reduced prescriptor. Here, a channel-specific microstructural state variable is determined independently of device geometry, and a geometry-dependent coupling functional is computable from field solutions without reference to surface chemistry. We derive this product form from a spatially resolved kernel representation and establish a perturbative separability criterion that defines the regime where independent variation of the variables is valid. The framework specifies five prescriptor classes for dominant loss pathways in transmon-class devices. Falsifiability is operationalized through a pre-committed 2x2 experimental protocol in which the variables must satisfy independent ratio checks within propagated uncertainty. A Minimum-Dataset Specification standardizes reporting for cross-laboratory inference. Part I establishes the conceptual and mathematical architecture; coordinated experimental validation is reserved for Part II.

quant-ph↗

arXiv2026

Oxygen distribution and segregation at grain boundaries in Nb and Ta-encapsulated Nb thin films for superconducting qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom-probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films for superconducting qubits and find that higher oxygen concentration in the interior of Nb grains lead to greater oxygen segregation levels at GBs. This finding emphasizes that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to reduce the level of oxygen segregation at GBs in Nb. The enrichment factor (Cgb/Cgrain) for oxygen segregation at GBs in Nb is 2.7 (error bar: 0.3) for Nb films, and Ta-capped Nb thin films exhibit slightly reduced Nb GB enrichment factors of 2.3 (error bar: 0.3) while GBs in the Ta capping layer itself possess higher enrichment factors of 3.0 (error bar: 0.3). We hypothesize that the Ta capping layer can trap oxygen and thereby affect oxygen in-diffusion and segregation at GBs in the underlying Nb thin films. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism contributing to decoherence in superconducting qubits.

cond-mat.supr-con↗

arXiv2025

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance.

cond-mat.mes-hall↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2024

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS.

cond-mat.mtrl-sci↗

arXiv2024

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.

quant-ph↗

arXiv2023

Discovery of Nb hydride precipitates in superconducting qubits

We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to reveal the existence of the niobium hydride precipitates directly in the Rigetti chip areas. Electron diffraction and high-resolution transmission electron microscopy (HR-TEM) analyses are performed at room and cryogenic temperatures (~106 K) on superconducting qubit niobium film areas, and reveal the formation of three types of Nb hydride domains with different crystalline orientations and atomic structures. There is also variation in their size and morphology from small (~5 nm) irregular shape domains within the Nb grains to large (~10-100 nm) Nb grains fully converted to niobium hydride. As niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperatures, our findings highlight a new previously unknown source of decoherence in superconducting qubits, contributing to both quasiparticle and two-level system (TLS) losses, and offering a potential explanation for qubit performance changes upon cooldowns. A pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications is also discussed.

quant-ph↗

arXiv2022

Developing a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems.

cond-mat.mes-hall↗

arXiv2022

Stress-induced omega phase transition in Nb thin films for superconducting qubits

We report the observation of omega phase formation in Nb thin films deposited by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using transmission electron microscopy (TEM). We hypothesize that this phase transformation to the omega phase with hexagonal structure from bcc phase as well as the formation of {111}<112> mechanical twins is induced by internal stress in the Nb thin films. In terms of lateral dimensions, the size of the omega phase of Nb range from 10 to 100 nm, which is comparable to the coherence length of Nb (~40 nm). In terms of overall volume fraction, ~1 vol.% of the Nb grains exhibit this omega phase. We also find that the omega phase in Nb is not observed in large grain Nb samples, suggesting that the phase transition can be suppressed through reducing the grain boundary density, which may serve as a source of strain and dislocations in this system. The current finding may indicate that the Nb thin film is prone to the omega phase transition due to the internal stress in the Nb thin film. We conclude by discussing effects of the omega phase on the superconducting properties of Nb thin films and discussing pathways to mitigate their formation.

cond-mat.supr-con↗

arXiv2021

TOF-SIMS Analysis of Decoherence Sources in Nb Superconducting Resonators

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of $μ$s, material quality and interfacial structures continue to curb device performance. When niobium is deployed as the superconducting material, two-level system defects in the thin film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry (TOF-SIMS) to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated by Rigetti Computing and at the National Institute of Standards and Technology through slight variations in the processing and vacuum conditions. We find that when Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species such as niobium hydrides and carbides are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impact the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

physics.app-ph↗

arXiv2021

Spatial Mapping of Electrostatics and Dynamics across 2D Heterostructures

In situ electron microscopy is a key tool for understanding the mechanisms driving novel phenomena in 2D structures. Unfortunately, due to various practical challenges, technologically relevant 2D heterostructures prove challenging to address with electron microscopy. Here, we use the differential phase contrast imaging technique to build a methodology for probing local electrostatic fields during electrical operation with nanoscale precision in such materials. We find that by combining a traditional DPC setup with a high pass filter, we can largely eliminate electric fluctuations emanating from short-range atomic potentials. With this method, a priori electric field expectations can be directly compared with experimentally derived values to readily identify inhomogeneities and potentially problematic regions. We use this platform to analyze the electric field and charge density distribution across layers of hBN and MoS2.

cond-mat.mtrl-sci↗

arXiv2020

Lithography-free IR polarization converters via orthogonal in-plane phonons in a-MoO3 flakes

Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, a-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optical characteristics of cavities formed using a-MoO3 to extend the degrees of freedom in the design of IR photonic components exploiting the in-plane anisotropy of this material. Polarization-dependent absorption over 80% in a multilayer Fabry-Perot structure with a-MoO3 is reported without the need for nanoscale fabrication on the a-MoO3. We observe coupling between the a-MoO3 optical phonons and the Fabry-Perot cavity resonances. Using cross-polarized reflectance spectroscopy we show that the strong birefringence results in 15% of the total power converted into the orthogonal polarization with respect to incident wave. These findings can open new avenues in the quest for polarization filters and low-loss, integrated planar IR photonics and in dictating polarization control.

physics.optics↗

arXiv2020

Direct Visualization of Electric Field induced Structural Dynamics in Monolayer Transition Metal Dichalcogenides

Layered transition metal dichalcogenides (TMDs) offer many attractive features for next-generation low-dimensional device geometries. Due to the practical and fabrication challenges related to in situ methods, the atomistic dynamics that give rise to realizable macroscopic device properties are often unclear. In this study, in situ transmission electron microscopy techniques are utilized in order to understand the structural dynamics at play, especially at interfaces and defects, in the prototypical film of monolayer MoS2 under electrical bias. Through our sample fabrication process, we clearly identify the presence of mass transport in the presence of a lateral electric field. In particular, we observe that the voids present at grain boundaries combine to induce structural deformation. The electric field mediates a net vacancy flux from the grain boundary interior to the exposed surface edge sites that leaves molybdenum clusters in its wake. Following the initial biasing cycles, however, the mass flow is largely diminished, and the resultant structure remains stable over repeated biasing. We believe insights from this work can help explain observations of non-uniform heating and preferential oxidation at grain boundary sites in these materials.

cond-mat.mtrl-sci↗

arXiv2019

Au@MoS2@WS2 Core-Shell Architectures: A Solution to Versatile Colloidal Suspensions of 2D Heterostructures

For years, solution processing has provided a versatile platform to extend the applications of transition metal dichalcogenides (TMDs) beyond those achievable with traditional preparation methods. However, existing solution-based synthesis and exfoliation approaches are not compatible with complex geometries, particularly when interfacial control is desired. As a result, promising TMD structures, including MoS2/WS2 heterostructures, are barred from the rich assembly and modification opportunities possible with solution preparation. Here, we introduce a strategy that combines traditional vapor phase deposition and solution chemistry to build TMD core-shell heterostructures housed in aqueous media. We report the first synthesized TMD core-shell heterostructure, Au@MoS2@WS2, with an Au nanoparticle core and MoS2 and WS2 shells, and provide a means of suspending the structure in solution to allow for higher order patterning and ligand-based functionalization. High-resolution electron microscopy and Raman spectroscopy provide detailed analysis of the structure and interfaces of the core-shell heterostructures. UV-vis, dynamic light scattering, and zeta potential measurements exhibit the outstanding natural stability and monodispersity of Au@MoS2@WS2 in solution. As a proof of concept, the aqueous environment is utilized to both functionalize the core-shell heterostructures with electrostatic ligands and pattern them into desired configurations on a target substrate. This work harnesses the advantages of vapor phase preparation of nanomaterials and the functionality possible with aqueous suspension to expand future engineering and application opportunities of TMD heterostructures.

physics.app-ph↗