SearcharxivSearch

arXiv subjects

Akshay Jain

Publications and source records attributed to Akshay Jain.

At least 19 recordsLinked to original sources

Non-Parametric Spatiotemporal Trajectory Prediction via State-Conditioned Transition Sampling

We present a training-free method for multi-modal trajectory prediction that achieves comparable accuracy to a 57M-parameter transformer while requiring no GPU and zero learned parameters. The method builds a transition table of historical state-to-next position pairs and retrieves neighbors using a product kernel over spatial proximity, bearing, speed, and temporal context. Two inference modes operate over this shared representation: diversity-penalized sampling produces trajectories covering distinct plausible routes, while beam search finds the highest-likelihood path. On the TrAISformer benchmark (Danish Maritime AIS), our method achieves competitive accuracy at full data availability and dramatically outperforms the transformer in data-scarce regimes---remaining stable down to 10% of training data where TrAISformer degrades catastrophically. This enables deployment in new geographic regions from an order of magnitude less historical data.

cs.LG

Phase-Only Positioning in Distributed MIMO Under Phase Impairments: AP Selection Using Deep Learning

Carrier phase positioning (CPP) can enable cm-level accuracy in next-generation wireless systems, while recent literature shows that accuracy remains high using phase-only measurements in distributed MIMO (D-MIMO). However, the impact of phase synchronization errors on such systems remains insufficiently explored. To address this gap, we first show that the proposed hyperbola intersection method achieves highly accurate positioning even in the presence of phase synchronization errors, when trained on appropriate data reflecting such impairments. We then introduce a deep learning (DL)-based D-MIMO antenna point (AP) selection framework that ensures high-precision localization under phase synchronization errors. Simulation results show that the proposed framework improves positioning accuracy compared to prior-art methods, while reducing inference complexity by approximately 19.7%.

eess.SP

Failure Tolerant Phase-Only Indoor Positioning via Deep Learning

High-precision localization turns into a crucial added value and asset for next-generation wireless systems. Carrier phase positioning (CPP) enables sub-meter to centimeter-level accuracy and is gaining interest in 5G-Advanced standardization. While CPP typically complements time-of-arrival (ToA) measurements, recent literature has introduced a phase-only positioning approach in a distributed antenna/MIMO system context with minimal bandwidth requirements, using deep learning (DL) when operating under ideal hardware assumptions. In more practical scenarios, however, antenna failures can largely degrade the performance. In this paper, we address the challenging phase-only positioning task, and propose a new DL-based localization approach harnessing the so-called hyperbola intersection principle, clearly outperforming the previous methods. Additionally, we consider and propose a processing and learning mechanism that is robust to antenna element failures. Our results show that the proposed DL model achieves robust and accurate positioning despite antenna impairments, demonstrating the viability of data-driven, impairment-tolerant phase-only positioning mechanisms. Comprehensive set of numerical results demonstrates large improvements in localization accuracy against the prior art methods.

eess.SP

Knowledge Graph-Based approach for Sustainable 6G End-to-End System Design

Previous generations of cellular communication, such as 5G, have been designed with the objective of improving key performance indicators (KPIs) such as throughput, latency, etc. However, to meet the evolving KPI demands and the ambitious sustainability targets for the Information and Communication Technology (ICT) industry, 6G will need to be designed differently. 6G will need to consider both the performance and sustainability targets for the various use cases it will serve. In addition, 6G will have various candidate technological enablers, making the design space of the system even more complex. Furthermore, due to the subjective nature of sustainability indicators, especially social sustainability, the literature still lacks clear methods to link them with technical enablers and 6G system design. Hence, in this article a novel method for 6G end-to-end (E2E) system design based on Knowledge graphs (KG) has been introduced. It considers as its input: the use case KPIs, use case sustainability requirements expressed as Key Values (KV) and KV Indicators (KVIs), the ability of the technological enablers to satisfy these KPIs and KVIs, the 6G system design principles defined in Hexa-X-II project, the maturity of a technological enabler and the dependencies between the various enablers. The KG method also introduces a novel approach for determining the key values addressed by a technological enabler. The effectiveness of the KG method was demonstrated by its application in designing the 6G E2E system for the cooperating mobile robot use case defined in the Hexa-X-II project, where 82 enablers were selected. Lastly, results from proof-of-concept demonstrations for a subset of the selected enablers have also been provided, which reinforce the efficacy of the KG method for designing a sustainable 6G system.

cs.NI

Phase-Only Positioning: Overcoming Integer Ambiguity Challenge through Deep Learning

This paper investigates uplink carrier phase positioning (CPP) in cell-free (CF) or distributed antenna system context, assuming a challenging case where only phase measurements are utilized as observations. In general, CPP can achieve sub-meter to centimeter-level accuracy but is challenged by the integer ambiguity problem. In this work, we propose two deep learning approaches for phase-only positioning, overcoming the integer ambiguity challenge. The first one directly uses phase measurements, while the second one first estimates integer ambiguities and then integrates them with phase measurements for improved accuracy. Our numerical results demonstrate that an inference complexity reduction of two to three orders of magnitude is achieved, compared to maximum likelihood baseline solution, depending on the approach and parameter configuration. This emphasizes the potential of the developed deep learning solutions for efficient and precise positioning in future CF 6G systems.

eess.SP

Cross-layer Integrated Sensing and Communication: A Joint Industrial and Academic Perspective

Integrated sensing and communication (ISAC) enables radio systems to simultaneously sense and communicate with their environment. This paper, developed within the Hexa-X-II project funded by the European Union, presents a comprehensive cross-layer vision for ISAC in 6G networks, integrating insights from physical-layer design, hardware architectures, AI-driven intelligence, and protocol-level innovations. We begin by revisiting the foundational principles of ISAC, highlighting synergies and trade-offs between sensing and communication across different integration levels. Enabling technologies (such as multiband operation, massive and distributed MIMO, non-terrestrial networks, reconfigurable intelligent surfaces, and machine learning) are analyzed in conjunction with hardware considerations including waveform design, synchronization, and full-duplex operation. To bridge implementation and system-level evaluation, we introduce a quantitative cross-layer framework linking design parameters to key performance and value indicators. By synthesizing perspectives from both academia and industry, this paper outlines how deeply integrated ISAC can transform 6G into a programmable and context-aware platform supporting applications from reliable wireless access to autonomous mobility and digital twinning.

eess.SP

Non-Uniform Illumination Attack for Fooling Convolutional Neural Networks

Convolutional Neural Networks (CNNs) have made remarkable strides; however, they remain susceptible to vulnerabilities, particularly in the face of minor image perturbations that humans can easily recognize. This weakness, often termed as 'attacks', underscores the limited robustness of CNNs and the need for research into fortifying their resistance against such manipulations. This study introduces a novel Non-Uniform Illumination (NUI) attack technique, where images are subtly altered using varying NUI masks. Extensive experiments are conducted on widely-accepted datasets including CIFAR10, TinyImageNet, and CalTech256, focusing on image classification with 12 different NUI attack models. The resilience of VGG, ResNet, MobilenetV3-small and InceptionV3 models against NUI attacks are evaluated. Our results show a substantial decline in the CNN models' classification accuracy when subjected to NUI attacks, indicating their vulnerability under non-uniform illumination. To mitigate this, a defense strategy is proposed, including NUI-attacked images, generated through the new NUI transformation, into the training set. The results demonstrate a significant enhancement in CNN model performance when confronted with perturbed images affected by NUI attacks. This strategy seeks to bolster CNN models' resilience against NUI attacks.

cs.CV

Downlink Power Control based UE-Sided Initial Access for Tactical 5G NR

Communication technologies play a crucial role in battlefields. They are an inalienable part of any tactical response, whether at the battlefront or inland. Such scenarios require that the communication technologies be versatile, scalable, cost-effective, and stealthy. While multiple studies and past products have tried to address these requirements, none of them have been able to solve all the four challenges simultaneously. Hence, in this paper, we propose a tactical solution that is based on the versatile, scalable, and cost effective 5G NR system. Our focus is on the initial-access phase which is subject to a high probability of detection by an eavesdropper. To address this issue, we propose a novel approach that involves some modifications to the initial access procedure that lowers the probability of detection while not affecting standards compliance and not requiring any modifications to the user equipment chipset implementation. Further, we demonstrate that with a simple downlink power control algorithm, we reduce the probability of detection at an eavesdropper. The result is a 5G NR based initial-access method that improves stealthiness when compared with a vanilla 5G NR implementation.

eess.SP

LPD-Aware Uplink CSI-based 5G NR Downlink Synchronization for Tactical Networks

5G NR is touted to be an attractive candidate for tactical networks owing to its versatility, scalability, and low cost. However, tactical networks need to be stealthy, where an adversary is not able to detect or intercept the tactical communication. In this paper, we investigate the stealthiness of 5G NR by looking at the probability with which an adversary that monitors the downlink synchronization signals can detect the presence of the network. We simulate a single-cell single-eavesdropper scenario and evaluate the probability with which the eavesdropper can detect the synchronization signal block when using either a correlator or an energy detector. We show that this probability is close to $ 100\% $ suggesting that 5G out-of-the-box is not suitable for a tactical network. We then propose utilizing the uplink channel-state-information to beamform the downlink synchronization-signals towards the tactical user-equipment (UE) to lower the eavesdropper detection probability while not compromising the performance of the legitimate tactical UE.

eess.SP

Heterogeneous Rank Beamforming for Industrial Communications

This paper proposes a novel hardware beamforming architecture, which is capable of utilizing a different number of Radio Frequency (RF) chains in different parts of the bandwidth. It also shows that a proportional fairness scheduler will effectively utilize the high rank part of the bandwidth in a multi-user setting, thus operating more efficiently and effectively than classical beamforming schemes.

cs.IT

On the Enabling of Multi-receiver Communications with Reconfigurable Intelligent Surfaces

The reconfigurable intelligent surface is a promising technology for the manipulation and control of wireless electromagnetic signals. In particular, it has the potential to provide significant performance improvements for wireless networks. However, to do so, a proper reconfiguration of the reflection coefficients of unit cells is required, which often leads to complex and expensive devices. To amortize the cost, one may share the system resources among multiple transmitters and receivers. In this paper, we propose an efficient reconfiguration technique providing control over multiple beams independently. Compared to time-consuming optimization techniques, the proposed strategy utilizes an analytical method to configure the surface for multi-beam radiation. This method is easy to implement, effective and efficient since it only requires phase reconfiguration. We analyze the performance for indoor and outdoor scenarios, given the broadcast mode of operation. The aforesaid scenarios encompass some of the most challenging scenarios that wireless networks encounter. We show that our proposed technique provisions sufficient improvements in the observed channel capacity when the receivers are close to the surface in the indoor office environment scenario. Further, we report a considerable increase in the system throughput given the outdoor environment.

eess.SP

Hardware Software Co-design of Statistical and Deep Learning Frameworks for Wideband Sensing on Zynq System on Chip

With the introduction of spectrum sharing and heterogeneous services in next-generation networks, the base stations need to sense the wideband spectrum and identify the spectrum resources to meet the quality-of-service, bandwidth, and latency constraints. Sub-Nyquist sampling (SNS) enables digitization for sparse wideband spectrum without needing Nyquist speed analog-to-digital converters. However, SNS demands additional signal processing algorithms for spectrum reconstruction, such as the well-known orthogonal matching pursuit (OMP) algorithm. OMP is also widely used in other compressed sensing applications. The first contribution of this work is efficiently mapping the OMP algorithm on the Zynq system-on-chip (ZSoC) consisting of an ARM processor and FPGA. Experimental analysis shows a significant degradation in OMP performance for sparse spectrum. Also, OMP needs prior knowledge of spectrum sparsity. We address these challenges via deep-learning-based architectures and efficiently map them on the ZSoC platform as second contribution. Via hardware-software co-design, different versions of the proposed architecture obtained by partitioning between software (ARM processor) and hardware (FPGA) are considered. The resource, power, and execution time comparisons for given memory constraints and a wide range of word lengths are presented for these architectures.

eess.SP

Understanding the Design-Space of Sparse/Dense Multiphase GNN dataflows on Spatial Accelerators

Graph Neural Networks (GNNs) have garnered a lot of recent interest because of their success in learning representations from graph-structured data across several critical applications in cloud and HPC. Owing to their unique compute and memory characteristics that come from an interplay between dense and sparse phases of computations, the emergence of reconfigurable dataflow (aka spatial) accelerators offers promise for acceleration by mapping optimized dataflows (i.e., computation order and parallelism) for both phases. The goal of this work is to characterize and understand the design-space of dataflow choices for running GNNs on spatial accelerators in order for mappers or design-space exploration tools to optimize the dataflow based on the workload. Specifically, we propose a taxonomy to describe all possible choices for mapping the dense and sparse phases of GNN inference, spatially and temporally over a spatial accelerator, capturing both the intra-phase dataflow and the inter-phase (pipelined) dataflow. Using this taxonomy, we do deep-dives into the cost and benefits of several dataflows and perform case studies on implications of hardware parameters for dataflows and value of flexibility to support pipelined execution.

cs.DC

Multi-Connectivity in Mobile Networks: Challenges and Benefits

Satisfying the stringent 5G Quality of Service (QoS) requirements necessitates efficient resource utilization by the mobile networks. Consequently, we argue that Multi-Connectivity (MC) is an effective solution to leverage the limited radio resources from multiple base stations (BSs) in order to enhance the user throughput, provide seamless connectivity, or increase the data reliability. For this, we study different MC architectures, where distinct network entities and protocol layers are used to split or aggregate the user traffic. The benefits and challenges of MC are analyzed as well as the open issues that network/device vendors and mobile network operators (MNOs) have to address for its use. Finally, through experimental evaluations, we illustrate the importance of MC design decisions for the overall network performance.

cs.NI

Computing Graph Neural Networks: A Survey from Algorithms to Accelerators

Graph Neural Networks (GNNs) have exploded onto the machine learning scene in recent years owing to their capability to model and learn from graph-structured data. Such an ability has strong implications in a wide variety of fields whose data is inherently relational, for which conventional neural networks do not perform well. Indeed, as recent reviews can attest, research in the area of GNNs has grown rapidly and has lead to the development of a variety of GNN algorithm variants as well as to the exploration of groundbreaking applications in chemistry, neurology, electronics, or communication networks, among others. At the current stage of research, however, the efficient processing of GNNs is still an open challenge for several reasons. Besides of their novelty, GNNs are hard to compute due to their dependence on the input graph, their combination of dense and very sparse operations, or the need to scale to huge graphs in some applications. In this context, this paper aims to make two main contributions. On the one hand, a review of the field of GNNs is presented from the perspective of computing. This includes a brief tutorial on the GNN fundamentals, an overview of the evolution of the field in the last decade, and a summary of operations carried out in the multiple phases of different GNN algorithm variants. On the other hand, an in-depth analysis of current software and hardware acceleration schemes is provided, from which a hardware-software, graph-aware, and communication-centric vision for GNN accelerators is distilled.

cs.LG

Characterizing the Communication Requirements of GNN Accelerators: A Model-Based Approach

Relational data present in real world graph representations demands for tools capable to study it accurately. In this regard Graph Neural Network (GNN) is a powerful tool, wherein various models for it have also been developed over the past decade. Recently, there has been a significant push towards creating accelerators that speed up the inference and training process of GNNs. These accelerators, however, do not delve into the impact of their dataflows on the overall data movement and, hence, on the communication requirements. In this paper, we formulate analytical models that capture the amount of data movement in the most recent GNN accelerator frameworks. Specifically, the proposed models capture the dataflows and hardware setup of these accelerator designs and expose their scalability characteristics for a set of hardware, GNN model and input graph parameters. Additionally, the proposed approach provides means for the comparative analysis of the vastly different GNN accelerators.

cs.AR

Graphene-based Wireless Agile Interconnects for Massive Heterogeneous Multi-chip Processors

The main design principles in computer architecture have recently shifted from a monolithic scaling-driven approach to the development of heterogeneous architectures that tightly co-integrate multiple specialized processor and memory chiplets. In such data-hungry multi-chip architectures, current Networks-in-Package (NiPs) may not be enough to cater to their heterogeneous and fast-changing communication demands. This position paper makes the case for wireless in-package nanonetworking as the enabler of efficient and versatile wired-wireless interconnect fabrics for massive heterogeneous processors. To that end, the use of graphene-based antennas and transceivers with unique frequency-beam reconfigurability in the terahertz band is proposed. The feasibility of such a nanonetworking vision and the main research challenges towards its realization are analyzed from the technological, communications, and computer architecture perspectives.

cs.ET

Radiation pattern prediction for Metasurfaces: A Neural Network based approach

As the current standardization for the 5G networks nears completion, work towards understanding the potential technologies for the 6G wireless networks is already underway. One of these potential technologies for the 6G networks are Reconfigurable Intelligent Surfaces (RISs). They offer unprecedented degrees of freedom towards engineering the wireless channel, i.e., the ability to modify the characteristics of the channel whenever and however required. Nevertheless, such properties demand that the response of the associated metasurface (MSF) is well understood under all possible operational conditions. While an understanding of the radiation pattern characteristics can be obtained through either analytical models or full wave simulations, they suffer from inaccuracy under certain conditions and extremely high computational complexity, respectively. Hence, in this paper we propose a novel neural networks based approach that enables a fast and accurate characterization of the MSF response. We analyze multiple scenarios and demonstrate the capabilities and utility of the proposed methodology. Concretely, we show that this method is able to learn and predict the parameters governing the reflected wave radiation pattern with an accuracy of a full wave simulation (98.8%-99.8%) and the time and computational complexity of an analytical model. The aforementioned result and methodology will be of specific importance for the design, fault tolerance and maintenance of the thousands of RISs that will be deployed in the 6G network environment.

eess.SP