arXiv subjects

Alain Delgado

Publications and source records attributed to Alain Delgado.

At least 19 recordsLinked to original sources

arXiv2026

Quantum algorithm for simulating resonant inelastic X-ray scattering in battery materials

Resonant inelastic X-ray scattering (RIXS) is the workhorse experimental technique for probing the structural degradation of higher-capacity cathode materials. However, the interpretation of experimental spectra is challenging due to the lack of accurate simulations. In this work, we propose a quantum algorithm for simulating the RIXS spectrum of molecular clusters hypothesized to form in Li-excess cathodes. The algorithm uses quantum phase estimation to sample the spectrum from a state encoding the scattering transition amplitudes of the cluster valence excitations. We prepare this state in the quantum computer using a block-encoding of the dipole operator and quantum signal processing to implement the Green's function propagator over intermediate core-excited states. To showcase the algorithm, we use a model cluster proposed in recent experimental works consisting of an oxygen dimer bonded to a manganese atom. Using the PennyLane software platform, we report resource estimation for simulating RIXS spectra for chemically motivated active spaces of increasing sizes. For a classically challenging active space with 20 orbitals, the algorithm requires $2.0 \times 10^{10}$ Toffoli gates and $414$ logical qubits.

quant-ph↗

arXiv2025

Quantum algorithms to detect ODMR-active defects for quantum sensing applications

Spin defects in two-dimensional materials are a promising platform for quantum sensing. Simulating the defect's optical response and optically detected magnetic resonance (ODMR) contrast is key to identifying suitable candidates. However, existing simulation methods are typically unable to supply the required accuracy. Here, we propose two quantum algorithms to detect an imbalance in the triplet-to-singlet intersystem crossing (ISC) rates between excited states with the same and different spin projections -- a necessary condition for nonzero ODMR response. The lowest-cost approach evaluates whether the evolution of an $S=0$ state under the spin-orbit coupling induces ISC to $S=1$, and also whether there is an imbalance in its intensity depending on the final state spin projection. The second approach works by comparing the emission spectrum of a spin defect with and without the spin-orbit coupling operator, inferring ISC intensity for different spin transition channels from spectrum intensity changes. Additionally, we present an improved scheme to evaluate the defect's optical response, building upon previous work. We study these quantum algorithms in the context of the negatively charged boron vacancy in hexagonal boron nitride. We generate an embedded active space of 18 spatial orbitals using quantum defect embedding theory (QDET) and show that the ISC rate imbalance can be detected with as few as 105 logical qubits and $4.41 \times 10^8$ Toffoli gates. By avoiding direct and costly rate calculations, our methods enable faster screening of candidate defects for ODMR activity, advancing the prospect of using quantum simulations to aid the development of high-performing sensing devices.

quant-ph↗

arXiv2025

Simulating near-infrared spectroscopy on a quantum computer for enhanced chemical detection

Near-infrared (NIR) spectroscopy is a non-invasive, low-cost, reagent-less, and rapid technique to measure chemical concentrations in a wide variety of sample types. However, extracting concentration information from the NIR spectrum requires training a statistical model on a large collection of measurements, which can be impractical, expensive, or dangerous. In this work, we propose a method for simulating NIR spectra on a quantum computer, as part of a larger workflow to improve NIR-based chemical detection. The quantum algorithm is highly optimized, exhibiting a cost reduction of many orders of magnitude relative to prior approaches. The main optimizations include the localization of vibrational modes, an efficient real-space-based representation of the Hamiltonian with a quantum arithmetic-based implementation of the time-evolution, optimal Trotter step size determination, and specific targeting of the NIR region. Overall, our algorithm achieves a O(M^2) scaling, compared with the O(M^12) coming from equivalent high-accuracy classical methods. As a concrete application, we show that simulating the spectrum of azidoacetylene (HC2N3), a highly explosive molecule with strong anharmonicities consisting of M = 12 vibrational modes, requires circuits with a maximum 8.47 x 10^8 T gates and 173 logical qubits. By enhancing the training datasets of detection models, the full potential of vibrational spectroscopy for chemical detection could be unlocked across a range of applications, including pharmaceuticals, agriculture, environmental monitoring, and medical sensing.

quant-ph↗

arXiv2024

Nonlinear Spectroscopy via Generalized Quantum Phase Estimation

Response theory has a successful history of connecting experimental observations with theoretical predictions. Of particular interest is the optical response of matter, from which spectroscopy experiments can be modelled. However, the calculation of response properties for quantum systems is often prohibitively expensive, especially for nonlinear spectroscopy, as it requires access to either the time evolution of the system or to excited states. In this work, we introduce a generalized quantum phase estimation framework designed for multi-variate phase estimation. This allows the treatment of general correlation functions enabling the recovery of response properties of arbitrary orders. The generalized quantum phase estimation circuit has an intuitive construction that is linked with a physical process of interest, and can directly sample frequencies from the distribution that would be obtained experimentally. In addition, we provide a single-ancilla modification of the new framework for early fault-tolerant quantum computers. Overall, our framework enables the efficient simulation of spectroscopy experiments beyond the linear regime, such as Raman spectroscopy, having that the circuit cost grows linearly with respect to the order of the target nonlinear response. This opens up an exciting new field of applications for quantum computers with potential technological impact.

quant-ph↗

arXiv2024

Simulating optically-active spin defects with a quantum computer

There is a pressing need for more accurate computational simulations of the opto-electronic properties of defects in materials to aid in the development of quantum sensing platforms. In this work, we explore how quantum computers could be effectively utilized for this purpose. Specifically, we develop fault-tolerant quantum algorithms to simulate optically active defect states and their radiative emission rates. We employ quantum defect embedding theory to translate the Hamiltonian of a defect-containing supercell into a smaller, effective Hamiltonian that accounts for dielectric screening effects. Our approach integrates block-encoding of the dipole operator with quantum phase estimation to selectively sample the optically active excited states that exhibit the largest dipole transition amplitudes. We also provide estimates of the quantum resources required to simulate a negatively-charged boron vacancy in a hexagonal boron nitride cluster. We conclude by offering a forward-looking perspective on the potential of quantum computers to enhance quantum sensor capabilities and identify specific scenarios where quantum computing can resolve problems traditionally challenging for classical computers.

quant-ph↗

arXiv2024

Simulating X-ray absorption spectroscopy of battery materials on a quantum computer

X-ray absorption spectroscopy is a crucial experimental technique for elucidating the mechanisms of structural degradation in battery materials. However, extracting information from the measured spectrum is challenging without high-quality simulations. In this work, we propose simulating near-edge X-ray absorption spectra as a promising application for quantum computing. It is attractive due to the ultralocal nature of X-ray absorption that significantly reduces the sizes of problems to be simulated, and because of the classical hardness of simulating spectra. We describe three quantum algorithms to compute the X-ray absorption spectrum and provide their asymptotic cost. One of these is a Monte-Carlo based time-domain algorithm, which is cost-friendly to early fault-tolerant quantum computers. We then apply the framework to an industrially relevant example, a CAS(22e,18o) active space for an O-Mn cluster in a Li-excess battery cathode, showing that practically useful simulations could be obtained with much fewer qubits and gates than ground-state energy estimation of the same material.

quant-ph↗

arXiv2023

Initial state preparation for quantum chemistry on quantum computers

Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we address the initial state preparation problem with an end-to-end algorithm that prepares and quantifies the quality of initial states, accomplishing the latter with a new metric -- the energy distribution. To be able to prepare more complicated initial states, we introduce an implementation technique for states in the form of a sum of Slater determinants that exhibits significantly better scaling than all prior approaches. We also propose low-precision quantum phase estimation (QPE) for further state quality refinement. The complete algorithm is capable of generating high-quality states for energy estimation, and is shown in select cases to lower the overall estimation cost by several orders of magnitude when compared with the best single product state ansatz. More broadly, the energy distribution picture suggests that the goal of QPE should be reinterpreted as generating improvements compared to the energy of the initial state and other classical estimates, which can still be achieved even if QPE does not project directly onto the ground state. Finally, we show how the energy distribution can help in identifying potential quantum advantage.

quant-ph↗

arXiv2023

Quantum simulation of battery materials using ionic pseudopotentials

Ionic pseudopotentials are widely used in classical simulations of materials to model the effective potential due to the nucleus and the core electrons. Modeling fewer electrons explicitly results in a reduction in the number of plane waves needed to accurately represent the states of a system. In this work, we introduce a quantum algorithm that uses pseudopotentials to reduce the cost of simulating periodic materials on a quantum computer. We use a qubitization-based quantum phase estimation algorithm that employs a first-quantization representation of the Hamiltonian in a plane-wave basis. We address the challenge of incorporating the complexity of pseudopotentials into quantum simulations by developing highly-optimized compilation strategies for the qubitization of the Hamiltonian. This includes a linear combination of unitaries decomposition that leverages the form of separable pseudopotentials. Our strategies make use of quantum read-only memory subroutines as a more efficient alternative to quantum arithmetic. We estimate the computational cost of applying our algorithm to simulating lithium-excess cathode materials for batteries, where more accurate simulations are needed to inform strategies for gaining reversible access to the excess capacity they offer. We estimate the number of qubits and Toffoli gates required to perform sufficiently accurate simulations with our algorithm for three materials: lithium manganese oxide, lithium nickel-manganese oxide, and lithium manganese oxyfluoride. Our optimized compilation strategies result in a pseudopotential-based quantum algorithm with a total Toffoli cost four orders of magnitude lower than the previous state of the art for a fixed target accuracy.

quant-ph↗

arXiv2022

Tailgating quantum circuits for high-order energy derivatives

To understand the chemical properties of molecules, it is often important to study derivatives of energies with respect to nuclear coordinates or external fields. Quantum algorithms for computing energy derivatives have been proposed, but only limited work has been done to address the specific challenges that arise in this context, where calculations are more complicated and involve more stringent requirements on accuracy compared to single-point energy calculations. In this work, we introduce a technique to improve the performance of variational quantum circuits calculating energy derivatives. The method, which we refer to as tailgating, is an adaptive procedure that selects gates based on their gradient with respect to the expectation value of Hamiltonian derivatives. These gates are then added at the end of a quantum circuit originally designed to calculate ground- or excited-state energies. A distinguishing feature of this approach is that the appended gates do not need to be optimized: their parameters can be set to zero and varied only for the purpose of computing energy derivatives, via calculating derivatives with respect to circuit parameters. We support the validity of this method by establishing sufficient conditions for a circuit to compute accurate energy gradients. This is achieved through a connection between energy derivatives and eigenstates of Taylor approximations of the Hamiltonian. We illustrate the advantages of the tailgating approach by performing simulations calculating the vibrational modes of beryllium hydride and water: quantities that depend on second-order energy derivatives.

quant-ph↗

arXiv2022

Simulating key properties of lithium-ion batteries with a fault-tolerant quantum computer

There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work has been done to outline how they may impact battery simulations. In this work, we provide a detailed answer to the following question: how can a quantum computer be used to simulate key properties of a lithium-ion battery? Based on recently-introduced first-quantization techniques, we lay out an end-to-end quantum algorithm for calculating equilibrium cell voltages, ionic mobility, and thermal stability. These can be obtained from ground-state energies of materials, which is the core calculation executed by the quantum computer using qubitization-based quantum phase estimation. The algorithm includes explicit methods for preparing approximate ground states of periodic materials in first quantization. We bring these insights together to perform the first estimation of the resources required to implement a quantum algorithm for simulating a realistic cathode material, dilithium iron silicate.

quant-ph↗

arXiv2021

Quantum simulation of molecules in solution

Quantum chemical calculations on quantum computers have been focused mostly on simulating molecules in gas-phase. Molecules in liquid solution are however most relevant for Chemistry. Continuum solvation models represent a good compromise between computational affordability and accuracy in describing solvation effects within a quantum chemical description of solute molecules. Here we report on the extension of the Variational Quantum Eigensolver to solvated systems, using the Polarizable Continuum Model. We show that accounting for solvation effects does not impact the algorithmic efficiency. Numerical results of noiseless simulations for molecular systems with up to twelve spin-orbitals (qubits) are presented. Furthermore, calculations performed on a simulated quantum hardware (IBM Q Mumbai), thus including noise, yield computed solvation free energies in fair agreement with the classical calculations without the inclusion of any error mitigation protocol.

quant-ph↗

arXiv2021

Differentiable quantum computational chemistry with PennyLane

This work describes the theoretical foundation for all quantum chemistry functionality in PennyLane, a quantum computing software library specializing in quantum differentiable programming. We provide an overview of fundamental concepts in quantum chemistry, including the basic principles of the Hartree-Fock method. A flagship feature in PennyLane is the differentiable Hartree-Fock solver, allowing users to compute exact gradients of molecular Hamiltonians with respect to nuclear coordinates and basis set parameters. PennyLane provides specialized operations for quantum chemistry, including excitation gates as Givens rotations and templates for quantum chemistry circuits. Moreover, built-in simulators exploit sparse matrix techniques for representing molecular Hamiltonians that lead to fast simulation for quantum chemistry applications. In combination with PennyLane's existing methods for constructing, optimizing, and executing circuits, these methods allow users to implement a wide range of quantum algorithms for quantum chemistry. We discuss how PennyLane can be used to implement variational algorithms for calculating ground-state energies, excited-state energies, and energy derivatives, all of which can be differentiated with respect to both circuit and Hamiltonian parameters. We provide an example workflow describing how to jointly optimize circuit parameters, nuclear coordinates, and basis set parameters for quantum chemistry algorithms. We discuss a functionality for reducing the number of qubits by using symmetries and explain how PennyLane can be used to estimate quantum resources needed to implement several quantum algorithms. By combining insights from quantum computing, computational chemistry, and machine learning, PennyLane is the first library for differentiable quantum computational chemistry.

quant-ph↗

arXiv2021

Variational quantum algorithm for molecular geometry optimization

Classical algorithms for predicting the equilibrium geometry of strongly correlated molecules require expensive wave function methods that become impractical already for few-atom systems. In this work, we introduce a variational quantum algorithm for finding the most stable structure of a molecule by explicitly considering the parametric dependence of the electronic Hamiltonian on the nuclear coordinates. The equilibrium geometry of the molecule is obtained by minimizing a more general cost function that depends on both the quantum circuit and the Hamiltonian parameters, which are simultaneously optimized at each step. The algorithm is applied to find the equilibrium geometries of the $\mathrm{H}_2$, $\mathrm{H}_3^+$, $\mathrm{BeH}_2$ and $\mathrm{H}_2\mathrm{O}$ molecules. The quantum circuits used to prepare the electronic ground state for each molecule were designed using an adaptive algorithm where excitation gates in the form of Givens rotations are selected according to the norm of their gradient. All quantum simulations are performed using the PennyLane library for quantum differentiable programming. The optimized geometrical parameters for the simulated molecules show an excellent agreement with their counterparts computed using classical quantum chemistry methods.

quant-ph↗

arXiv2021

Universal quantum circuits for quantum chemistry

Universal gate sets for quantum computing have been known for decades, yet no universal gate set has been proposed for particle-conserving unitaries, which are the operations of interest in quantum chemistry. In this work, we show that controlled single-excitation gates in the form of Givens rotations are universal for particle-conserving unitaries. Single-excitation gates describe an arbitrary $U(2)$ rotation on the two-qubit subspace spanned by the states $|01\rangle, |10\rangle$, while leaving other states unchanged -- a transformation that is analogous to a single-qubit rotation on a dual-rail qubit. The proof is constructive, so our result also provides an explicit method for compiling arbitrary particle-conserving unitaries. Additionally, we describe a method for using controlled single-excitation gates to prepare an arbitrary state of a fixed number of particles. We derive analytical gradient formulas for Givens rotations as well as decompositions into single-qubit and CNOT gates. Our results offer a unifying framework for quantum computational chemistry where every algorithm is a unique recipe built from the same universal ingredients: Givens rotations.

quant-ph↗

arXiv2020

Quantum Algorithm for Simulating Single-Molecule Electron Transport

An accurate description of electron transport at a molecular level requires a precise treatment of quantum effects. These effects play a crucial role in determining the electron transport properties of single molecules, such as current-voltage curves, which can be challenging to simulate classically. Here we introduce a quantum algorithm to efficiently calculate the electronic current through single-molecule junctions in the weak-coupling regime. We show that a quantum computer programmed to simulate vibronic transitions between different charge states of a molecule can be used to compute sequential electron transfer rates and electric current. In the harmonic approximation, the algorithm can be implemented using Gaussian boson sampling devices, which are a near-term platform for photonic quantum computing. We apply the algorithm to simulate the current and conductance of a magnesium porphine molecule. The simulations demonstrate quantum effects that are manifested as discrete steps in the current and conductance, in agreement with experimental and theoretical data.

quant-ph↗

arXiv2020

Quantum Algorithm for Simulating Molecular Vibrational Excitations

The excitation of vibrational modes in molecules affects the outcome of chemical reactions, for example by providing molecules with sufficient energy to overcome activation barriers. In this work, we introduce a quantum algorithm for simulating molecular vibrational excitations during vibronic transitions. We discuss how a special-purpose quantum computer can be programmed with molecular data to optimize a vibronic process such that desired modes get excited during the transition. We investigate the effect of such excitations on selective bond dissociation in pyrrole and butane during photochemical and mechanochemical vibronic transitions. The results are discussed with respect to experimental observations and classical simulations. We also introduce quantum-inspired classical algorithms for simulating molecular vibrational excitations in special cases where only a limited number of modes are of interest.

quant-ph↗

arXiv2020

Nonequilibrium Solvent Polarization Effects in Real-Time Electronic Dynamics of Solute Molecules Subject to Time-Dependent Electric Fields: A New Feature of the Polarizable Continuum Model

We develop an extension of the time-dependent equation-of-motion formulation of the polarizable continuum model (EOM-TDPCM) to introduce nonequilibrium cavity field effects in quantum mechanical calculations of solvated molecules subject to time-dependent electric fields. This method has been implemented in Octopus, a state-of-the-art code for real-space, real-time time-dependent density functional theory (RT-TDDFT) calculations. To show the potential of our methodology, we perform EOM-TDPCM/RT-TDDFT calculations of trans-azobenzene in water and in other model solvents with shorter relaxation times. Our results for the optical absorption spectrum of trans-azobenzene show (i) that cavity field effects have a clear impact in the overall spectral shape and (ii) that an accurate description of the solute shape (as the one provided within PCM) is key to correctly account for cavity field effects.

physics.chem-ph↗

arXiv2019

Octopus, a computational framework for exploring light-driven phenomena and quantum dynamics in extended and finite systems

Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, providing an unique framework allowing to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory framework. The present article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, like the new theoretical framework of quantum electrodynamics density-functional formalism (QEDFT) for the description of novel light-matter hybrid states. Those advances, and other being released soon as part of the Octopus package, will enable the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (QED-materials).

physics.comp-ph↗