arXiv subjects

Alain Leger

Publications and source records attributed to Alain Leger.

15 recordsLinked to original sources

arXiv2025

System Analysis for a high-precision high-accuracy Astrometric instrument for HWO

This study presents a comprehensive system analysis for an instrument onboard the Habitable Worlds Observatory (HWO), designed for high-precision, high-accuracy differential astrometry, with the primary scientific goal to determine the mass of Earth-like planets around the nearest Sun-like stars. The analysis integrates the definition of the mission profile, the instrumental concept architecture, and an error budget that breaks down the key contributors to the sub-micro arcses precision required for a single measurement. A portion of this budget addresses photo-center estimation for both the target and calibration stars used in differential astrometry. Other major contributors are related to instrumental control of systematics in the reconstruction of differential angle measurements from pixel data (focal plane calibration) to on sky line of sight (telescope distortion calibration). End-of-mission astrometry requires multiple observations (typically 100) of the same target distributed over the mission lifetime. We assess the mission profile to estimate the fraction of survey time required for astrometric survey to achieve the science objective. The proposed architecture of the instrument concept is derived from error budget and mission constraints based on a large visible detector array composed of an assembly of multiple CMOS sensor chips resulting in an overall gigapixel focal plane. We evaluate the Technology Readiness Level (TRL) and propose a way forward reaching TRL 5 level for key technologies by the Mission Consolidation Review in 2029.

astro-ph.IM↗

arXiv2025

Experimental tests of the calibration of high precision differential astrometry for HWO

Many different scientific applications require sub-micro arcsecond precision astrometry, including researching rocky exoplanets in the vicinity of the Sun and studying dark matter. The Habitable Worlds Observatory (HWO) is a promising candidate to carry an astrometric instrument because it provides a stable, space-based telescope with a large aperture, which allows faint sources and small displacements to be observed. This paper presents the characterization of an appropriate detector for an astrometric instrument: the 46Mpx Gigapyx from Pyxalis. Moreover it explains the implementation of a testbed enabling interferometric characterization of pixel positions. Finally, the paper introduces a method for calibrating the telescope's optical distortion. This method was implemented in simulation and tested thanks to an optical bench developed at IPAG in France.

astro-ph.IM↗

arXiv2024

Experimental tests of the calibration of high precision differential astrometry for exoplanets

High precision differential Astrometry is the branch of astronomy that evaluates the relative position, distance and motion of celestial objects with respect to the stars present in the field of view. A mission called Theia has been submitted in 2022 for ESA's M7 call for missions, using a diffraction-limited telescope about 1m in diameter and with a field of view of 0.5 degrees, capable of achieving sub-micro-arcsecond angular accuracy, corresponding to 1e-5 pixel on the detector. Such precision makes it possible to study the nature of dark matter in our galaxy and to reveal the architecture of exoplanetary systems close to the Sun, down to the mass of the Earth. The aim of the experimental tests presented in this poster is to improve the TRL of 2 specific aspects: the calibration of new CMOS detectors with very large number of pixels and the calibration of the telescope aberrations.First, a key element of such a space telescope is the focal plane, which must be calibrated spatially with an extreme precision down to the 1e-5 pixel level. Previous work has shown that this is possible with small detector matrices (80x80 px) [1]. The goal is now to check the performances and validate this method with the new very large detectors. Pyxalis, a company based near Grenoble, is developing very large detectors (8000x5000 px) that have a low noise level and high sensitivity. The aim is to characterize and validate this type of detectors in a laboratory demonstration (see poster Pancher et al.), to ensure that the performance achieved meets the required specifications. We present the results of these characterization in this contribution.The telescope stability is also a sensitive issue. Recent work [2] has shown that the reference stars in the field of the telescope can be used as actual metrology sources in order to compute the field distortion function. Our simulations allow to model the optical aberrations with bivariate polynoms. The effects on the calibration accuracy of the degrees of the polynoms, the number of reference stars and the tilt perturbation of the M2 mirror are investigated. This poster will present the latest results obtained on a test bed developed to experimentally study the performances of this new field calibration method.

astro-ph.IM↗

arXiv2024

Laboratory characterisation bench for high precision astrometry

High precision differential astrometry assesses the positions, distances, and motions of celestial objects in relation to the stars. The focal plane of such space telescope must be calibrated with a precision down to the level of 1e-5 pixel in order to be able to detect Earth-like planets in the close vicinity of the Sun. The presented characterization bench is designed to improve the technology readiness level for the following key points: calibration of new detectors with a high number of pixels and correcting the field distortion using stars in the field of view. The first aim of the project concentrates on the characterization of a 46 megapixels sensor from PYXALIS, to assess its typical parameters using an integrating sphere. The next objective intends to map the intra and extra pixel quantum yield of the detector with a precision of 1e-5 pixels and investigate the evolution of the pixel geometry in response to environment fluctuations. To conduct these tests, an optical bench is designed with an LCD screen and a doublet, used as a source that allows directing light to specific groups of pixels. Interferometric calibration of the detector pixel centroid position will be achieved using fibers that illuminate the detector with Young's fringes. To characterize the distortion of the detector, a diaphragm will produce adjustable optical aberrations to be corrected and therefore change the source sensor positional relationship. The final step involves the simulation of a star's field, which will be imaged on the detector to assess optical quality.

astro-ph.IM↗

arXiv2022

L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans

Hi-5 is the L'-band (3.5-4.0 $\mu$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

astro-ph.IM↗

arXiv2017

Theia: Faint objects in motion or the new astrometry frontier

In the context of the ESA M5 (medium mission) call we proposed a new satellite mission, Theia, based on relative astrometry and extreme precision to study the motion of very faint objects in the Universe. Theia is primarily designed to study the local dark matter properties, the existence of Earth-like exoplanets in our nearest star systems and the physics of compact objects. Furthermore, about 15 $\%$ of the mission time was dedicated to an open observatory for the wider community to propose complementary science cases. With its unique metrology system and "point and stare" strategy, Theia's precision would have reached the sub micro-arcsecond level. This is about 1000 times better than ESA/Gaia's accuracy for the brightest objects and represents a factor 10-30 improvement for the faintest stars (depending on the exact observational program). In the version submitted to ESA, we proposed an optical (350-1000nm) on-axis TMA telescope. Due to ESA Technology readiness level, the camera's focal plane would have been made of CCD detectors but we anticipated an upgrade with CMOS detectors. Photometric measurements would have been performed during slew time and stabilisation phases needed for reaching the required astrometric precision.

astro-ph.IM↗

arXiv2015

Exoplanet Exploration Program Analysis Group (ExoPAG) Report to Paul Hertz Regarding Large Mission Concepts to Study for the 2020 Decadal Survey

This is a joint summary of the reports from the three Astrophysics Program Analysis Groups (PAGs) in response to the "Planning for the 2020 Decadal Survey" charge given by the Astrophysics Division Director Paul Hertz. This joint executive summary contains points of consensus across all three PAGs. Additional findings specific to the individual PAGs are reported separately in the individual reports. The PAGs concur that all four large mission concepts identified in the white paper as candidates for maturation prior to the 2020 Decadal Survey should be studied in detail. These include the Far-IR Surveyor, the Habitable-Exoplanet Imaging Mission, the UV/Optical/IR Surveyor, and the X-ray Surveyor. This finding is predicated upon assumptions outlined in the white paper and subsequent charge, namely that 1) major development of future large flagship missions under consideration are to follow the implementation phases of JWST and WFIRST; 2) NASA will partner with the European Space Agency on its L3 Gravitational Wave Surveyor; 3) the Inflation Probe be classified as a probe-class mission to be developed according to the 2010 Decadal Survey report. If these key assumptions were to change, this PAG finding would need to be re-evaluated. The PAGs find that there is strong community support for the second phase of this activity - maturation of the four proposed mission concepts via Science and Technology Definition Teams (STDTs). The PAGs find that there is strong consensus that all of the STDTs contain broad and interdisciplinary representation of the science community. Finally, the PAGs find that there is community support for a line of Probe-class missions within the Astrophysics mission portfolio (condensed).

astro-ph.EP↗

arXiv2015

Impact of ηearth on the capabilities of affordable space missions to detect biosignatures on extrasolar planets

We present an analytic model to estimate the capabilities of space missions dedicated to the search for biosignatures in the atmosphere of rocky planets located in the habitable zone of nearby stars. Relations between performance and mission parameters such as mirror diameter, distance to targets, and radius of planets, are obtained. Two types of instruments are considered: coronagraphs observing in the visible, and nulling interferometers in the thermal infrared. Missions considered are: single-pupil coronagraphs with a 2.4 m primary mirror, and formation flying interferometers with 4 x 0.75 m collecting mirrors. The numbers of accessible planets are calculated as a function of ηearth. When Kepler gives its final estimation for ηearth, the model will permit a precise assessment of the potential of each instrument. Based on current estimations, ηearth = 10% around FGK stars and 50% around M stars, the coronagraph could study in spectroscopy only ~1.5 relevant planets, and the interferometer ~14.0. These numbers are obtained under the major hypothesis that the exozodiacal light around the target stars is low enough for each instrument. In both cases, a prior detection of planets is assumed and a target list established. For the long-term future, building both types of spectroscopic instruments, and using them on the same targets, will be the optimal solution because they provide complementary information. But as a first affordable space mission, the interferometer looks the more promising in term of biosignature harvest.

astro-ph.IM↗

arXiv2011

On the Mass of CoRoT-7b

The mass of CoRoT-7b, the first transiting superearth exoplanet, is still a subject of debate. A wide range of masses have been reported in the literature ranging from as high as 8 M_Earth to as low as 2.3 M_Earth. Although most mass determinations give a density consistent with a rocky planet, the lower value permits a bulk composition that can be up to 50% water. We present an analysis of the CoRoT-7b radial velocity measurements that uses very few and simple assumptions in treating the activity signal. By only analyzing those radial velocity data for which multiple measurements were made in a given night we remove the activity related radial velocity contribution without any a priori model. We demonstrate that the contribution of activity to the final radial velocity curve is negligible and that the K-amplitude due to the planet is well constrained. This yields a mass of 7.42 +/- 1.21 M_Earth and a mean density of rho = 10.4 +/- 1.8 gm cm^-3. CoRoT-7b is similar in mass and radius to the second rocky planet to be discovered, Kepler-10b, and within the errors they have identical bulk densities - they are virtual twins. These bulk densities lie close to the density - radius relationship for terrestrial planets similar to what is seen for Mercury. CoRoT-7b and Kepler-10b may have an internal structure more like Mercury than the Earth.

astro-ph.EP↗

arXiv2010

The SARS algorithm: detrending CoRoT light curves with Sysrem using simultaneous external parameters

Surveys for exoplanetary transits are usually limited not by photon noise but rather by the amount of red noise in their data. In particular, although the CoRoT spacebased survey data are being carefully scrutinized, significant new sources of systematic noises are still being discovered. Recently, a magnitude-dependant systematic effect was discovered in the CoRoT data by Mazeh & Guterman et al. and a phenomenological correction was proposed. Here we tie the observed effect a particular type of effect, and in the process generalize the popular Sysrem algorithm to include external parameters in a simultaneous solution with the unknown effects. We show that a post-processing scheme based on this algorithm performs well and indeed allows for the detection of new transit-like signals that were not previously detected.

astro-ph.EP↗

arXiv2009

The far future of exoplanet direct characterization

In this outlook we describe what could be the next steps of the direct characterization of habitable exoplanets after first the medium and large mission projects and investigate the benefits of the spectroscopic and direct imaging approaches. We show that after third and fourth generation missions foreseeable for the next 100 years, we will face a very long era before being able to see directly the morphology of extrasolar organisms.

astro-ph.EP↗

arXiv2009

Astrometric Detection of Earthlike Planets

Astrometry can detect rocky planets in a broad range of masses and orbital distances and measure their masses and three-dimensional orbital parameters, including eccentricity and inclination, to provide the properties of terrestrial planets. The masses of both the new planets and the known gas giants can be measured unambiguously, allowing a direct calculation of the gravitational interactions, both past and future. Such dynamical interactions inform theories of the formation and evolution of planetary systems, including Earth-like planets. Astrometry is the only technique technologically ready to detect planets of Earth mass in the habitable zone (HZ) around solar-type stars within 20 pc. These Earth analogs are close enough for follow-up observations to characterize the planets by infrared imaging and spectroscopy with planned future missions such as the James Webb Space Telescope (JWST) and the Terrestrial Planet Finder/Darwin. Employing a demonstrated astrometric precision of 1 microarcsecond and a noise floor under 0.1 micro-arcseconds, SIM Lite can make multiple astrometric measurements of the nearest 60 F-, G-, and K-type stars during a five-year mission. SIM Lite directly tests theories of rocky planet formation and evolution around Sun-like stars and identifies the nearest potentially habitable planets for later spaceborne imaging, e.g., with Terrestrial Planet Finder and Darwin. SIM was endorsed by the two recent Decadal Surveys and it meets the highest-priority goal of the 2008 AAAC Exoplanet Task Force.

astro-ph.EP↗

arXiv2007

DARWIN mission proposal to ESA

The discovery of extra-solar planets is one of the greatest achievements of modern astronomy. There are now more than 200 such objects known, and the recent detection of planets with masses approximately 5 times that of Earth demonstrates that extra-solar planets of low mass exist. In addition to providing a wealth of scientific information on the formation and structure of planetary systems, these discoveries capture the interest of both scientists and the wider public with the profound prospect of the search for life in the Universe. We propose an L-type mission, called Darwin, whose primary goal is the study of terrestrial extrasolar planets and the search for life on them. By its very nature, Darwin advances the first Grand Theme of ESA Cosmic Vision. Accomplishing the mission objectives will require collaborative science across disciplines ranging from planet formation and atmospheres to chemistry and biology, and these disciplines will reap profound rewards from their contributions to the Darwin mission.

astro-ph↗

arXiv2003

10 um wavefront spatial filtering: first results with chalcogenide fibers

Wavefront cleaning by single-mode fibers has proved to be efficient in optical-infrared interferometry to improve calibration quality. For instance, the FLUOR instrument has demonstrated the capability of fluoride glass single-mode fibers in this respect in the K and L bands. New interferometric instruments developped for the mid-infrared require the same capability for the 8-12 um range. We have initiated a program to develop single-mode fibers in the prospect of the VLTI mid-infrared instrument MIDI and of the ESA/DARWIN and NASA/TPF missions that require excellent wavefront quality. In order to characterize the performances of chalcogenide fibers we are developping, we have set up an experiment to measure the far-field pattern radiated at 10 um. In this paper, we report the first and promising results obtained with this new component.

astro-ph↗

arXiv2001

Exo-planet detection with the COROT space mission. I. A multi-transit detection criterion

We present a detection criterion for exo-planets to be used with the space mission COROT. This criterion is based on the transit method, which suggests the observation of star dimming caused by partial occulations by planetary companions. When at least three transits are observed, we show that a cross-correlation technique can yield a detection threshold, thus enabling the evaluation of the number of possible detections, assuming a model for the stellar population in the Galaxy.

astro-ph↗