arXiv subjects

Alain Mourad

Publications and source records attributed to Alain Mourad.

10 recordsLinked to original sources

arXiv2026

ISAC-Enabled Non-Terrestrial Networks for 6G: Design Principles, Standardization, Performance Tradeoffs, and Use Cases

Non-Terrestrial Networks (NTN) have emerged as a key enabler to fully realize the vision of integrated, intelligent, and ubiquitous connectivity in 6G systems. However, several operational challenges, including severe Doppler effects, interference, and latency, hinder the seamless integration of NTN and Terrestrial Networks (TN). In this context, Integrated Sensing and Communication (ISAC), which unifies sensing and communication functionalities within a common framework, offers great potential to address these challenges while enabling new network capabilities. Due to its complementary functionalities, ISAC can play a pivotal role in enhancing NTN performance, although its practical adoption requires a fundamental rethinking of existing architectural and standardization frameworks. Motivated by this need, this article examines key aspects of ISAC-enabled NTN, including architectural design principles, application scenarios, standardization challenges, and key performance tradeoffs. Finally, a representative case study is presented to illustrate major technical challenges and highlight promising future research directions for ISAC-enabled NTN.

cs.IT↗

arXiv2026

Configuration Tuning for ISAC: Cost-Efficient Adaptation via RACE-CMA

This paper studies a feedback driven configuration tuning framework for adaptive sensing feedback in Integrated Sensing and Communication (ISAC) systems. We propose a framework in which the User Equipment (UE) adapts sensing parameters under dynamic conditions while satisfying network defined constraints. The problem is formulated as a stochastic constrained optimization problem, to improve sensing reliability and latency. We consider a bistatic ISAC sensing feedback setup and instantiate the framework via threshold optimization as a representative case study, enabling benchmarking against baseline methods. To ensure efficiency under UE computational limits, we propose Ranking Aware, Constrained, and Efficient CMAES (RACE CMA), which integrates two stage racing, common random numbers, noise aware ranking, and feasible constraint handling. Results show that the proposed approach improves sensing reliability by about 35 percent while reducing computational cost by about 25 percent, yielding roughly a twofold gain in performance cost efficiency. This highlights that UE side configuration tuning is a promising mechanism for enhancing closed loop ISAC performance under practical system constraints.

eess.SP↗

arXiv2026

NextSense: A Semi-Synthetic Sensing Data generation Platform

Emerging integrated sensing and communication (ISAC) applications require large volumes of data, but collecting such datasets in real networks is costly, time consuming, and often infeasible due to limited access to low level measurements. In this paper we present NextSense, an open and modular semi-synthetic data generation platform that consists of a 5G stack, a channel emulator, and an UE emulator. The platform allows users full customization on radio configuration, channel and mobility, and traffic profiles through an API and GUI, and produces multi-perspective outputs that combine symbol-level IQ samples, protocol traces, and key performance indicators across UE, RAN, and CN. This paper describes the NextSense's architecture, and validates its ability to act as a faithful proxy for real measurements in sensing use cases.

cs.NI↗

arXiv2025

Advanced Closed-Loop Method with Limited Feedback for ISAC

6G wireless networks are poised to seamlessly integrate communication, computing, localization, and sensing functionalities, ensuring high reliability and trustworthiness. This paper introduces Smart Sensing Feedback (SSF), a limited-feedback framework designed to enhance sensing capabilities while maintaining communication performance. SSF adapts the concept of retransmission from communication to sensing. Specifically, we focus on downlink (DL) bistatic sensing, where the User Equipment (UE) performs measurements from reflected sensing signals and provides feedback to the network (NW). In sensing services, UE reporting can vary significantly due to dynamic factors such as target characteristics, environmental conditions, and UE status. Our results demonstrate that SSF significantly improves sensing quality while preserving communication efficiency. Additionally, it enhances key performance metrics such as probability of detection, latency, and power consumption. These improvements underscore SSF's ability to deliver robust, low-overhead feedback and adaptability to support a wide range of ISAC applications.

eess.SP↗

arXiv2025

802.11bf Multiband Passive Sensing: Reusing Wi-Fi Signaling for Sensing

This paper presents a novel multiband passive sensing system that leverages IEEE 802.11bf Wi-Fi signals for environmental sensing, focusing on both sub-7 GHz and millimeter-wave (mmWave) bands. By combining Channel State Information (CSI) from multiple bands, the system enhances accuracy and reliability in detecting human presence, movement, and activities in indoor environments. Utilizing a novel model, called MILAGRO, the system demonstrates robust performance across different scenarios, including monitoring human presence in workspaces and tracking movement in corridors. Experimental results show high accuracy (95-100%), with improved performance by integrating multiband data. The system also addresses key security concerns associated with passive sensing, proposing measures to mitigate potential risks. This work advances the use of Wi-Fi for passive sensing by reducing reliance on active sensing infrastructure and extending the capabilities of low-cost, non-intrusive environmental monitoring.

cs.NI↗

arXiv2025

Constant Modulus Waveforms for IoT-Centric Integrated Sensing and Communications

Integrated sensing and communications (ISAC) is considered a key enabler to support application scenarios such as the Internet-of-Things (IoT) in which both communications and sensing play significant roles. Multi-carrier waveforms, such as orthogonal frequency division multiplexing (OFDM), have been considered as good candidates for ISAC due to their high communications data rate and good time bandwidth property for sensing. Nevertheless, their high peak-to-average-power-ratio (PAPR) values lead to either performance degradation or an increase in system complexity. This can make OFDM unsuitable for IoT applications with insufficient resources in terms of power, system complexity, hardware size or cost. This article provides IoT-centric constant modulus waveform designs that leverage the advantage of unit PAPR and thus are more suitable in resource-limited scenarios. More specifically, several single-carrier frequency and/or phase-modulated waveforms are considered. A comprehensive discussion on their radar sensing and communications performance is conducted based on performance metrics, including the radar ambiguity function, the bandwidth property, the data rate, and the communications receiver complexity.

cs.IT↗

arXiv2025

ISAC Channel Modelling -- Perspectives from ETSI

Integrated Sensing and Communications (ISAC) is defined as one of six usage scenarios in the ITU-R International Mobile Telecommunications (IMT) 2030 framework for 6G. ISAC is envisioned to introduce the sensing capability into the cellular network, where sensing may be obtained using the cellular radio frequency (RF) signals with or without additional auxiliary sensors. To enable ISAC, specification bodies such as European Telecommunications Standards Institute (ETSI) and Third Generation Partnership Project (3GPP) have already started to look into detailed ISAC use cases, their requirements, and the channel models and evaluation methodologies that are necessary to design and evaluate ISAC performance. With focus on the channel model, the current communication-centric channel models like those specified in 3GPP technical report (TR) 38.901 do not cover the RF signals interactions between the transmitter, target object, receiver and their surrounding environment. To bridge this gap, 3GPP has been looking into the basic changes that are necessary to make to their TR38.901 channel model with focus on selected use cases from the 3GPP SA1 5G-Advanced feasibility study. In parallel, ETSI ISAC Industry Specification Group (ISG) has been studying the more advanced ISAC channel modelling features that are needed to support the variety of ISAC use cases envisioned in 6G. In this paper, we present the baseline and advanced features developed thus far in 3GPP and ETSI ISAC ISG, respectively, towards a comprehensive view of the ISAC channel model in 6G.

eess.SP↗

arXiv2025

Integrating Sensing and Communications in 6G? Not Until It Is Secure to Do So

Integrated Sensing and Communication (ISAC) is emerging as a cornerstone technology for forthcoming 6G systems, significantly improving spectrum and energy efficiency. However, the commercial viability of ISAC hinges on addressing critical challenges surrounding security, privacy, and trustworthiness. These challenges necessitate an end-to-end framework to safeguards both communication data and sensing information, particularly in ultra-low-latency and highly connected environments. Conventional solutions, such as encryption and key management, often fall short when confronted with ISAC's dual-functional nature. In this context, the physical layer plays a pivotal role: this article reviews emerging physical-layer strategies, including artificial noise (AN) injection, cooperative jamming, and constructive interference (CI), which enhance security by mitigating eavesdropping risks and safeguarding both communication data and sensing information. We further highlight the unique privacy issues that ISAC introduces to cellular networks and outline future research directions aimed at ensuring robust security and privacy for efficient ISAC deployment in 6G.

cs.IT↗

arXiv2023

Enhanced Access Traffic Steering Splitting Switching with Utility-Based Decisioning

Coexistence of 3GPP access networks, namely 4G and 5G, and non-3GPP access networks, namely Wi-Fi, has enabled data offloading from one access network to another to reduce burden on the congested network. Within the evolution of 5G system, the coexistence has been evolved to a multi-access framework where simultaneous transmission on both 3GPP and non-3GPP access networks has been enabled. This framework is named as access traffic steering, splitting and switching (ATSSS) in 3GPP and is considered as one of the key enablers to provide stringent requirements on data rate and service continuity. In this paper, we introduce an enhanced ATSSS (eAT3S) algorithm where not only instantaneous link performance measurements but also network operator preferences are taken into account to optimize the overall network performance. As part of considered non-3GPP wireless access technologies (WATs), light fidelity (LiFi) access networks are also considered alongside with Wi-Fi networks.

cs.NI↗

arXiv2022

Smart Interference Management xApp using Deep Reinforcement Learning

Interference continues to be a key limiting factor in cellular radio access network (RAN) deployments. Effective, data-driven, self-adapting radio resource management (RRM) solutions are essential for tackling interference, and thus achieving the desired performance levels particularly at the cell-edge. In future network architecture, RAN intelligent controller (RIC) running with near-real-time applications, called xApps, is considered as a potential component to enable RRM. In this paper, based on deep reinforcement learning (RL) xApp, a joint sub-band masking and power management is proposed for smart interference management. The sub-band resource masking problem is formulated as a Markov Decision Process (MDP) that can be solved employing deep RL to approximate the policy functions as well as to avoid extremely high computational and storage costs of conventional tabular-based approaches. The developed xApp is scalable in both storage and computation. Simulation results demonstrate advantages of the proposed approach over decentralized baselines in terms of the trade-off between cell-centre and cell-edge user rates, energy efficiency and computational efficiency.

eess.SP↗