arXiv subjects

Alastair Basden

Publications and source records attributed to Alastair Basden.

27 records · Page 2Linked to original sources

arXiv2014

A real-time simulation facility for astronomical adaptive optics

In this paper we introduce the concept of real-time hardware-in-the-loop simulation for astronomical adaptive optics, and present the case for the requirement for such a facility. This real-time simulation, when linked with an adaptive optics real-time control system, provides an essential tool for the validation, verification and integration of the Extremely Large Telescope real-time control systems prior to commissioning at the telescope. We demonstrate that such a facility is crucial for the success of the future extremely large telescopes.

astro-ph.IM↗

arXiv2014

Real-time correlation reference update for astronomical adaptive optics

The use of laser guide stars in astronomical adaptive optics results in elongated Shack-Hartmann wavefront sensor image patterns. Image correlation techniques can be used to determine local wavefront slope by correlating each sub-aperture image with its expected elongated shape, or reference image. Here, we present a technique which allows the correlation reference images to be updated while the adaptive optics loop is closed. We show that this can be done without affecting the resulting point spread functions. On-sky demonstration is reported. We compare different techniques for obtaining the reference images, and investigate performance over a wide range of adaptive optics system parameters. We find that image correlation techniques perform better than the standard centre-of-gravity algorithm and are highly suited for use with open-loop multiple object adaptive optics systems.

astro-ph.IM↗

arXiv2012

The Durham adaptive optics real-time controller: Capability and ELT suitability

The Durham adaptive optics real-time controller is a generic, high performance real-time control system for astronomical adaptive optics systems. It has recently had new features added as well as performance improvements, and here we give details of these, as well as ways in which optimisations can be made for specific adaptive optics systems and hardware implementations. We also present new measurements that show how this real-time control system could be used with any existing adaptive optics system, and also show that when used with modern hardware, it has high enough performance to be used with most Extremely Large Telescope adaptive optics systems.

astro-ph.IM↗

arXiv2011

Wavefront sensing with a brightest pixel selection algorithm

Astronomical adaptive optics systems with open-loop deformable mirror control have recently come on-line. In these systems, the deformable mirror surface is not included in the wavefront sensor paths, and so changes made to the deformable mirror are not fed back to the wavefront sensors. This gives rise to all sorts of linearity and control issues mainly centred on one question: Has the mirror taken the shape requested? Non-linearities in wavefront measurement and in the deformable mirror shape can lead to significant deviations in mirror shape from the requested shape. Here, wavefront sensor measurements made using a brightest pixel selection method are discussed along with the implications that this has for open-loop AO systems. Discussion includes elongated laser guide star spots and also computational efficiency.

astro-ph.IM↗

arXiv2010

The Durham adaptive optics real-time controller

The Durham adaptive optics real-time controller was initially a proof of concept design for a generic adaptive optics control system. It has since been developed into a modern and powerful CPU based real-time control system, capable of using hardware acceleration (including FPGAs and GPUs), based primarily around commercial off the shelf hardware. It is powerful enough to be used as the real-time controller for all currently planned 8~m class telescope adaptive optics systems. Here we give details of this controller and the concepts behind it, and report on performance including latency and jitter, which is less than 10~$μ$s for small adaptive optics systems.

astro-ph.IM↗

arXiv2010

Considerations for EAGLE from Monte-Carlo adaptive optics simulation

The EAGLE instrument for the E-ELT is a multi-IFU spectrograph, that uses a MOAO system for wavefront correction of interesting lines of sight. We present a Monte-Carlo AO simulation package that has been used to model the performace of EAGLE, and provide results, including comparisons with an analytical code. These results include an investigation of the performance of compressed reconstructor representations that have the potential to significantly reduce the complexity of a real-time control system when implemented.

astro-ph.IM↗

arXiv2007

Shack-Hartmann sensor improvement using optical binning

We present a design improvement for a recently proposed type of Shack-Hartmann wavefront sensor that uses a cylindrical (lenticular) lenslet array. The improved sensor design uses optical binning and requires significantly fewer detector pixels than the corresponding conventional or cylindrical Shack-Hartmann sensor, and so detector readout noise causes less signal degradation. Additionally, detector readout time is significantly reduced, which reduces the latency for closed loop systems, and data processing requirements. We provide simple analytical noise considerations and Monte-Carlo simulations, and show that the optically binned Shack-Hartmann sensor can offer better performance than the conventional counterpart in most practical situations, and our design is particularly suited for use with astronomical adaptive optics systems.

physics.optics↗

arXiv2006

The Durham ELT adaptive optics simulation platform

Adaptive optics systems are essential on all large telescopes where image quality is important. These are complex systems with many design parameters requiring optimisation before good performance can be achieved. The simulation of adaptive optics systems is therefore necessary to categorise the expected performance. This paper describes an adaptive optics simulation platform, developed at Durham University, which can be used to simulate adaptive optics systems on the largest proposed future extremely large telescopes (ELTs) as well as current systems. This platform is modular, object oriented and has the benefit of hardware application acceleration which can be used to improve the simulation performance, essential for ensuring that the run time of a given simulation is acceptable. The simulation platform described here can be highly parallelised using parallelisation techniques suited for adaptive optics simulation, whilst still offering the user complete control while the simulation is running. Results from the simulation of a ground layer adaptive optics system are provided as an example to demonstrate the flexibility of this simulation platform.

astro-ph↗

arXiv2006

Adaptive optics simulation performance improvements using reconfigurable logic

A technique used to accelerate an adaptive optics simulation platform using reconfigurable logic is described. The performance of parts of this simulation have been improved by up to 600 times (reducing computation times by this factor) by implementing algorithms within hardware and enables adaptive optics simulations to be carried out in a reasonable timescale. This demonstrates that it is possible to use reconfigurable logic to accelerate computational codes by very large factors when compared with conventional software approaches, and this has relevance for many computationally intensive applications. The use of reconfigurable logic for high performance computing is currently in its infancy and has never before been applied to this field.

astro-ph↗