arXiv subjects

Albert Cabellos-Aparicio

Publications and source records attributed to Albert Cabellos-Aparicio.

At least 55 records · Page 3Linked to original sources

arXiv2020

Workload Characterization of Programmable Metasurfaces

Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost.

cs.NI↗

arXiv2020

Radiation pattern prediction for Metasurfaces: A Neural Network based approach

As the current standardization for the 5G networks nears completion, work towards understanding the potential technologies for the 6G wireless networks is already underway. One of these potential technologies for the 6G networks are Reconfigurable Intelligent Surfaces (RISs). They offer unprecedented degrees of freedom towards engineering the wireless channel, i.e., the ability to modify the characteristics of the channel whenever and however required. Nevertheless, such properties demand that the response of the associated metasurface (MSF) is well understood under all possible operational conditions. While an understanding of the radiation pattern characteristics can be obtained through either analytical models or full wave simulations, they suffer from inaccuracy under certain conditions and extremely high computational complexity, respectively. Hence, in this paper we propose a novel neural networks based approach that enables a fast and accurate characterization of the MSF response. We analyze multiple scenarios and demonstrate the capabilities and utility of the proposed methodology. Concretely, we show that this method is able to learn and predict the parameters governing the reflected wave radiation pattern with an accuracy of a full wave simulation (98.8%-99.8%) and the time and computational complexity of an analytical model. The aforementioned result and methodology will be of specific importance for the design, fault tolerance and maintenance of the thousands of RISs that will be deployed in the 6G network environment.

eess.SP↗

arXiv2020

RouteNet: Leveraging Graph Neural Networks for network modeling and optimization in SDN

Network modeling is a key enabler to achieve efficient network operation in future self-driving Software-Defined Networks. However, we still lack functional network models able to produce accurate predictions of Key Performance Indicators (KPI) such as delay, jitter or loss at limited cost. In this paper we propose RouteNet, a novel network model based on Graph Neural Network (GNN) that is able to understand the complex relationship between topology, routing, and input traffic to produce accurate estimates of the per-source/destination per-packet delay distribution and loss. RouteNet leverages the ability of GNNs to learn and model graph-structured information and as a result, our model is able to generalize over arbitrary topologies, routing schemes and traffic intensity. In our evaluation, we show that RouteNet is able to predict accurately the delay distribution (mean delay and jitter) and loss even in topologies, routing and traffic unseen in the training (worst case MRE=15.4%). Also, we present several use cases where we leverage the KPI predictions of our GNN model to achieve efficient routing optimization and network planning.

cs.NI↗

arXiv2020

Scalability Analysis of Programmable Metasurfaces for Beam Steering

Programmable metasurfaces have garnered significant attention as they confer unprecedented control over the electromagnetic response of any surface. Such feature has given rise to novel design paradigms such as Software-Defined Metamaterials (SDM) and Reconfigurable Intelligent Surfaces (RIS) with multiple groundbreaking applications. However, the development of programmable metasurfaces tailored to the particularities of a potentially broad application pool becomes a daunting task because the design space becomes remarkably large. This paper aims to ease the design process by proposing a methodology that, through a semi-analytical model of the metasurface response, allows to derive performance scaling trends as functions of a representative set of design variables. Although the methodology is amenable to any electromagnetic functionality, this paper explores its use for the case of beam steering at 26 GHz for 5G applications. Conventional beam steering metrics are evaluated as functions of the unit cell size, number of unit cell states, and metasurface size for different incidence and reflection angles. It is shown that metasurfaces 5$λ\times$5$λ$ or larger with unit cells of $λ/3$ and four unit cell states ensure good performance overall. Further, it is demonstrated that performance degrades significantly for angles larger than $θ> 60^o$ and that, to combat this, extra effort is needed in the development of the unit cell. These performance trends, when combined with power and cost models, will pave the way to optimal metasurface dimensioning.

physics.app-ph↗

arXiv2020

Error Analysis of Programmable Metasurfaces for Beam Steering

Recent years have seen the emergence of programmable metasurfaces, where the user can modify the EM response of the device via software. Adding reconfigurability to the already powerful EM capabilities of metasurfaces opens the door to novel cyber-physical systems with exciting applications in domains such as holography, cloaking, or wireless communications. This paradigm shift, however, comes with a non-trivial increase of the complexity of the metasurfaces that will pose new reliability challenges stemming from the need to integrate tuning, control, and communication resources to implement the programmability. While metasurfaces will become prone to failures, little is known about their tolerance to errors. To bridge this gap, this paper examines the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and exemplified for beam steering, which constitutes a relevant case for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 20% can still be considered acceptable.

eess.SP↗

arXiv2020

Engineer the Channel and Adapt to it: Enabling Wireless Intra-Chip Communication

Ubiquitous multicore processors nowadays rely on an integrated packet-switched network for cores to exchange and share data. The performance of these intra-chip networks is a key determinant of the processor speed and, at high core counts, becomes an important bottleneck due to scalability issues. To address this, several works propose the use of mm-wave wireless interconnects for intra-chip communication and demonstrate that, thanks to their low-latency broadcast and system-level flexibility, this new paradigm could break the scalability barriers of current multicore architectures. However, these same works assume 10+ Gb/s speeds and efficiencies close to 1 pJ/bit without a proper understanding on the wireless intra-chip channel. This paper first demonstrates that such assumptions do not hold in the context of commercial chips by evaluating losses and dispersion in them. Then, we leverage the system's monolithic nature to engineer the channel, this is, to optimize its frequency response by carefully choosing the chip package dimensions. Finally, we exploit the static nature of the channel to adapt to it, pushing efficiency-speed limits with simple tweaks at the physical layer. Our methods reduce the path loss and delay spread of a simulated commercial chip by 47 dB and 7.3x, respectively, enabling intra-chip wireless communications over 10 Gb/s and only 3.1 dB away from the dispersion-free case.

cs.NI↗

arXiv2020

Exploration of Intercell Wireless Millimeter-Wave Communication in the Landscape of Intelligent Metasurfaces

Software-defined metasurfaces are electromagnetically ultra-thin, artificial components that can provide engineered and externally controllable functionalities. The control over these functionalities is enabled by the metasurface tunability, which is implemented by embedded electronic circuits that modify locally the surface resistance and reactance. Integrating controllers within the metasurface cells, able to intercommunicate and adaptively reconfigure it, thus imparting a desired electromagnetic operation, opens the path towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing, programmable computing, and actuation facilities. In this work we take a crucial step towards bringing the AI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercell communication capabilities in a software-defined HyperSurface designed for operation is the microwave regime. We examine three different wireless communication channels within the landscape of the reflective metasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside a dedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each case we examine the physical implementation of the mm-wave transponder nodes, we quantify communication channel metrics, and we identify complexity vs. performance trade-offs.

physics.app-ph↗

arXiv2019

Unveiling the potential of Graph Neural Networks for network modeling and optimization in SDN

Network modeling is a critical component for building self-driving Software-Defined Networks, particularly to find optimal routing schemes that meet the goals set by administrators. However, existing modeling techniques do not meet the requirements to provide accurate estimations of relevant performance metrics such as delay and jitter. In this paper we propose a novel Graph Neural Network (GNN) model able to understand the complex relationship between topology, routing and input traffic to produce accurate estimates of the per-source/destination pair mean delay and jitter. GNN are tailored to learn and model information structured as graphs and as a result, our model is able to generalize over arbitrary topologies, routing schemes and variable traffic intensity. In the paper we show that our model provides accurate estimates of delay and jitter (worst case $R^2=0.86$) when testing against topologies, routing and traffic not seen during training. In addition, we present the potential of the model for network operation by presenting several use-cases that show its effective use in per-source/destination pair delay/jitter routing optimization and its generalization capabilities by reasoning in topologies and routing schemes not seen during training.

cs.NI↗

arXiv2019

Reprogrammable Graphene-based Metasurface Mirror with Adaptive Focal Point for THz Imaging

Recent emergence of metasurfaces has enabled the development of ultra-thin flat optical components through different wavefront shaping techniques at various wavelengths. However, due to the non-adaptive nature of conventional metasurfaces, the focal point of the resulting optics needs to be fixed at the design stage, thus severely limiting its reconfigurability and applicability. In this paper, we aim to overcome such constraint by presenting a flat reflective component that can be reprogrammed to focus terahertz waves at a desired point in the near-field region. To this end, we first propose a graphene-based unit cell with phase reconfigurability, and then employ the coding metasurface approach to draw the phase profile required to set the focus on the target point. Our results show that the proposed component can operate close to the diffraction limit with high focusing range and low focusing error. We also demonstrate that, through appropriate automation, the reprogrammability of the metamirror could be leveraged to develop compact terahertz scanning and imaging systems, as well as novel reconfigurable components for terahertz wireless communications.

physics.optics↗

arXiv2019

Fault Tolerance in Programmable Metasurfaces: The Beam Steering Case

Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable.

physics.app-ph↗

arXiv2018

Modeling the EM Field Distribution within a Computer Chip Package

Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The study of the channel inside the chip is essential to minimize latency and power. However, this requires long and computationally-intensive simulations which take a lot of time. We propose and implement an analytical model of the EM propagation inside the package based on ray tracing. This model could compute the electric field intensity inside the chip reducing the computational time several orders of magnitude with an average mismatch of only 1.7 dB.

cs.ET↗

arXiv2018

Channel Characterization for Chip-scale Wireless Communications within Computing Packages

Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses.

cs.ET↗

arXiv2018

Understanding the Modeling of Computer Network Delays using Neural Networks

Recent trends in networking are proposing the use of Machine Learning (ML) techniques for the control and operation of the network. In this context, ML can be used as a computer network modeling technique to build models that estimate the network performance. Indeed, network modeling is a central technique to many networking functions, for instance in the field of optimization, in which the model is used to search a configuration that satisfies the target policy. In this paper, we aim to provide an answer to the following question: Can neural networks accurately model the delay of a computer network as a function of the input traffic? For this, we assume the network as a black-box that has as input a traffic matrix and as output delays. Then we train different neural networks models and evaluate its accuracy under different fundamental network characteristics: topology, size, traffic intensity and routing. With this, we aim to have a better understanding of computer network modeling with neural nets and ultimately provide practical guidelines on how such models need to be trained.

cs.NI↗

arXiv2018

Medium Access Control in Wireless Network-on-Chip: A Context Analysis

Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current Network-on-Chip (NoC) techniques to manycore processors. A Wireless Network-on-Chip (WNoC) can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement of conventional and throughput-oriented wireline NoCs. However, the development of Medium Access Control (MAC) strategies needed to efficiently share the wireless medium among the increasing number of cores remains as a considerable challenge given the singularities of the environment and the novelty of the research area. In this position paper, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, to then discuss their implications on the design of MAC protocols for manycore WNoCs, with the ultimate goal of kickstarting this arguably unexplored research area.

cs.DC↗

arXiv2018

Intercell Wireless Communication in Software-defined Metasurfaces

Tunable metasurfaces are ultra-thin, artificial electromagnetic components that provide engineered and externally adjustable functionalities. The programmable metasurface, the HyperSurFace, concept consists in integrating controllers within the metasurface that interact locally and communicate globally to obtain a given electromagnetic behaviour. Here, we address the design constraints introduced by both functions accommodated by the programmable metasurface, i.e., the desired metasurface operation and the unit cells wireless communication enabling such programmable functionality. The design process for meeting both sets of specifications is thoroughly discussed. Two scenarios for wireless intercell communication are proposed. The first exploits the metasurface layer itself, while the second employs a dedicated communication layer beneath the metasurface backplane. Complexity and performance trade-offs are highlighted.

physics.app-ph↗

arXiv2018

Securing the Control-plane Channel and Cache of Pull-based ID/LOC Protocols

Pull-based ID/LOC split protocols, such as LISP (RFC6830), retrieve mappings from a mapping system to encapsulate and forward packets. This is done by means of a control-plane channel. In this short paper we describe three attacks against this channel (Denial-of-Service and overflowing) as well as the against the local cache used to store such mappings. We also provide a solution against such attacks that implements a per-source rate-limiter using a Count-Min Sketch data-structure.

cs.NI↗

arXiv2018

SDN for End-Nodes: Scenario Analysis and Architectural Guidelines

The advent of SDN has brought a plethora of new architectures and controller designs for many use-cases and scenarios. Existing SDN deployments focus on campus, datacenter and WAN networks. However, little research efforts have been devoted to the scenario of effectively controlling a full deployment of end-nodes (e.g. smartphones) that are transient and scattered across the Internet. In this paper, we present a rigorous analysis of the challenges associated with an SDN architecture for end-nodes, show that such challenges are not found in existing SDN scenarios, and provide practical design guidelines to address them. Then, and following these guidelines we present a reference architecture based on a decentralized, distributed and symmetric controller with a connectionless pull-oriented southbound and an intent-driven northbound. Finally, we measure a proof-of-concept deployment to assess the validity of the analysis as well as the architecture.

cs.NI↗

arXiv2018

Programmable Metasurfaces: State of the Art and Prospects

Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces.

physics.app-ph↗