SearcharxivSearch

arXiv subjects

Albert Polman

Publications and source records attributed to Albert Polman.

At least 19 recordsLinked to original sources

Revealing time characteristics of optical excitations in dielectric and plasmonic structures through cathodoluminescence interferometry

Cathodoluminescence (CL) spectroscopy provides access to optical excitations with nanometer spatial resolution, but direct time-resolved measurements of optical resonances remain challenging. Here, we demonstrate that CL interferometry provides access to the temporal response, phase behavior, and modal spectral structure of resonant nanoscale scatterers without requiring ultrafast pump-probe schemes. We develop an analytical framework in which Fourier transformation angle- and frequency-resolved CL interferograms yields the decay time of optical resonances governed by the linear optical response. Multimode resonators exhibit characteristic temporal CL beating signatures associated with spectral mode splitting. By exploiting transition radiation emitted from a nearby metallic surface as a broadband reference, we further demonstrate phase retrieval and cross-correlation measurements between instantaneous and resonant emission processes. Experimental measurements on Au nanoparticles, broadband plasmonic emitters, Au nanostars, and Si nanospheres supporting multipolar Mie resonances confirm the theoretical predictions, and decay times in the range 1-10 fs are derived for each system. Our results establish CL interferometry as a powerful approach for accessing spectral, spatial, and phase information within a single nanoscale measurement with fs resolution.

cond-mat.mes-hall

Studying electron beam coherence using plasmon interference

Energetic electrons create distinct cathodoluminescence (CL) angular distributions upon interaction with dielectric and plasmonic nanostructures, providing valuable information on coherences in the excitation pathways. A counterintuitive prediction is that the CL signals arising from the excitation associated with different lateral regions of an extended electron wave are mutually incoherent and do not interfere, while the signals originating from different structures within the electromagnetic field of a narrow electron beam are mutually coherent. We present conclusive experimental evidence of these effects by examining the angular CL emission profile from defocused electron-beam excitation of a thin silicon nitride film, which is shown to follow an incoherent sum of CL excitations within the electron beam spot. In contrast, CL interferences are observed for separated plasmonic scatterers excited within the evanescent field of a single electron. Coherence may be recovered through correlations between emitted light and post-selected electron states, for which we propose a measurement geometry that erases which-path information of the electron trajectory.

cond-mat.mes-hall

Determining Electron Beam Lateral Coherence in a Scanning Electron Microscope Using Electron Diffraction

We develop and characterize scanning transmission electron microscopy (STEM) capabilities within a scanning electron microscope (SEM) to investigate the effective lateral coherence of the electron beam (e-beam) in the specimen plane. Using single-crystalline Au flakes and a sample composed of a monolayer of graphene, we obtain high-quality selected-area electron diffraction (SAED) maps and convergent-beam electron diffraction (CBED) patterns, validating the systems ability to probe crystallographic information at an acceleration voltage of 30 keV. Building on these capabilities, we implement a method, which is adapted from techniques traditionally used in transmission electron microscopy, to measure the degree of lateral coherence of the e-beam in the specimen plane of the SEM. By analyzing interference between electrons with two different wave vectors separated by 0.031 per angstrom, we extract a lower limit for the degree of lateral coherence over 5% of the e-beam diameter of approximately 60%. These coherence values are sufficient to enable quantum-coherent electron-light-matter interaction experiments in the SEM.

cond-mat.mes-hall

Near-field effects on cathodoluminescence outcoupling in perovskite thin films

Halide perovskite semiconductors are a promising material for high-efficiency solar cells. Their optical properties can vary within and between crystallographic grains. We present spatially-resolved cathodoluminescence (CL) spectroscopy at 2 keV and 5 keV on polycrystalline CsPbBr3 perovskite films to study these variations at the nanoscale. The CL maps show a strongly reduced intensity near the polycrystalline grain boundaries. We perform numerical simulations of the far-field emission of the electron beam-generated optical near fields using the surface profiles from AFM as input. We find that near grain boundaries the light outcoupling is strongly reduced due to enhanced internal reflection and light trapping at the curved surfaces. Lateral variations in CL intensity inside grains are due to Fabry-Perot-like resonances in the film, with the substrate acting as a back reflector. Our results show that near-field coupling and interference effects can dominate nanoscale luminescence maps of halide perovskite films. The results are broadly relevant for the analysis of cathodoluminescence and photoluminescence of corrugated thin films.

cond-mat.mtrl-sci

Roadmap for Quantum Nanophotonics with Free Electrons

Over the past century, continuous advancements in electron microscopy have enabled the synthesis, control, and characterization of high-quality free-electron beams. These probes carry an evanescent electromagnetic field that can drive localized excitations and provide high-resolution information on material structures and their optical responses, currently reaching the sub-{\aa}ngstr\"om and few-meV regime. Moreover, combining free electrons with pulsed light sources in ultrafast electron microscopy adds temporal resolution in the sub-femtosecond range while offering enhanced control of the electron wave function. Beyond their exceptional capabilities for time-resolved spectromicroscopy, free electrons are emerging as powerful tools in quantum nanophotonics, on par with photons in their ability to carry and transfer quantum information, create entanglement within and with a specimen, and reveal previously inaccessible details on nanoscale quantum phenomena. This Roadmap outlines the current state of this rapidly evolving field, highlights key challenges and opportunities, and discusses future directions through a collection of topical sections prepared by leading experts.

cond-mat.mes-hall

Toward Optimum Coupling between Free Electrons and Confined Optical Modes

Free electrons are unique tools to probe and manipulate nanoscale optical fields with emerging applications in ultrafast spectromicroscopy and quantum metrology. However, advances in this field are hindered by the small probability associated with the excitation of single optical modes by individual free electrons. Here, we theoretically investigate the scaling properties of the electron-driven excitation probability for a wide variety of optical modes including plasmons in metallic nanostructures and Mie resonances in dielectric cavities, spanning a broad spectral range that extends from the ultraviolet to the infrared. The highest probabilities for the direct generation of three-dimensionally confined modes are observed at low electron and mode energies in small structures, with order-unity ($\sim100$\%) coupling demanding the use of $<100$~eV electrons interacting with $<1$~eV polaritons confined down to tens of nm. Electronic transitions in artificial atoms also emerge as practical systems to realize strong coupling to few-eV free electrons. In contrast, conventional dielectric cavities reach a maximum probability in the few-percent range. In addition, we show that waveguide modes can be generated with higher-than-unity efficiency by phase-matched interaction with grazing electrons, suggesting an efficient method to create multiple excitations of a localized optical mode by an individual electron through funneling the so-generated propagating photons into a confining cavity -- an alternative approach to direct electron-cavity interaction. Our work provides a roadmap to optimize electron-photon coupling with potential applications in electron spectromicroscopy as well as nonlinear and quantum optics at the nanoscale.

physics.optics

Nano-patterned back-reflector with engineered near-field/far-field light scattering for enhanced light trapping in silicon-based multi-junction solar cells

Multi-junction solar cells provide a path to overcome the efficiency limits of standard silicon solar cells by harvesting more efficiently a broader range of the solar spectrum. However, Si-based multi-junction architectures are hindered by incomplete harvesting in the near-infrared (near-IR) spectral range, as Si sub-cells have weak absorption close to the band gap. Here, we introduce an integrated near-field/far-field light trapping scheme to enhance the efficiency of silicon-based multi-junction solar cells in the near-IR range. To achieve this, we design a nanopatterned diffractive silver back-reflector featuring a scattering matrix that optimizes trapping of multiply-scattered light into a range of diffraction angles. We minimize reflection to the 0th-order and parasitic plasmonic absorption in the silver by engineering destructive interference in the patterned back contact. Numerical and experimental assessment of the optimal design on the performance of single-junction Si TOPCon solar cells highlights an improved external quantum efficiency (EQE) over a planar back-reflector (+1.52 mA/cm2). Nanopatterned metagrating back-reflectors are fabricated on GaInP/GaInAsP//Si two-terminal triple-junction solar cells via Substrate Conformal Imprint Lithography (SCIL) and characterized optically and electronically, demonstrating a power conversion efficiency improvement of +0.9%abs over the planar reference. Overall, our work demonstrates the potential of nanophotonic light trapping for enhancing the efficiency of silicon-based multi-junction solar cells, paving the way for more efficient and sustainable solar energy technologies.

physics.optics

Passive Bias-Free Nonreciprocal Metasurfaces Based on Nonlinear Quasi-Bound States in the Continuum

Nonreciprocal devices - in which light is transmitted with different efficiencies along opposite directions - are key technologies for modern photonic applications, yet their compact and miniaturized implementation remains an open challenge. Among different avenues, nonlinearity-induced nonreciprocity has attracted significant attention due to the absence of external bias and integrability within conventional material platforms. So far, nonlinearity-induced nonreciprocity has been demonstrated only in guided platforms using high-Q resonators. Here, we demonstrate ultrathin optical metasurfaces with large nonreciprocal response for free-space radiation based on silicon third-order nonlinearities. Our metasurfaces combine an out-of-plane asymmetry - necessary to obtain nonreciprocity - with in-plane broken symmetry, which finely tunes the radiative linewidth of quasi-bound states in the continuum (q-BICs). Third-order nonlinearities naturally occurring in silicon, engaged by q-BICs, are shown to enable over 10 dB of nonreciprocal transmission while maintaining less than 3 dB in insertion loss. The demonstrated devices merge the field of nonreciprocity with ultrathin metasurface technologies, offering an exciting functionality for signal processing and routing, communications, and protection of high-power laser cavities.

physics.optics

Solving integral equations in free-space with inverse-designed ultrathin optical metagratings

As standard microelectronic technology approaches fundamental limitations in speed and power consumption, novel computing strategies are strongly needed. Analog optical computing enables processing large amounts of data at a negligible energy cost and high speeds. Based on these principles, ultrathin optical metasurfaces have been recently explored to process large images in real-time, in particular for edge detection. By incorporating feedback, it has also been recently shown that metamaterials can be tailored to solve complex mathematical problems in the analog domain, although these efforts have so far been limited to guided-wave systems and bulky setups. Here, we present an ultrathin Si metasurface-based platform for analog computing that is able to solve Fredholm integral equations of the second kind using free-space visible radiation. A Si-based metagrating was inverse-designed to implement the scattering matrix synthesizing a prescribed Kernel corresponding to the mathematical problem of interest. Next, a semi-transparent mirror was incorporated into the sample to provide adequate feedback and thus perform the required Neumann series, solving the corresponding equation in the analog domain at the speed of light. Visible wavelength operation enables a highly compact, ultrathin device that can be interrogated from free-space, implying high processing speeds and the possibility of on-chip integration.

physics.optics

Pump-probe cathodoluminescence microscopy

In this paper we describe the technical implementation of pump-probe cathodoluminescence microscopy (PP-CL), a novel technique for studying ultrafast dynamics in materials using combined excitation of electron and laser pulses. The PP-CL setup is based on a commercial scanning electron microscope combined with a femtosecond laser. Here we discuss the design, technical details, and characterization of the PP-CL setup. The luminescence emitted by the sample (either photoluminescence, cathodoluminescence or a combination of both) can be analyzed in terms of spectrum, temporal statistics, and frequency-modulated intensity (lock-in detection). The laser spot on the sample is characterized by analyzing the changes in the secondary electron signal on a GaN substrate, from which we extract a laser spot size in the $μm$ range. While this method ensures spatial overlap of laser and electron pulses on the sample, temporal alignment is achieved using time-correlated measurements of photoluminescence and cathodoluminescence. We also discuss some considerations to take into account when designing a PP-CL experiment, regarding temporal and spatial resolution. This paper provides a detailed reference for the development of any PP-CL microscope.

physics.ins-det

Probing nanoscale thermal transport with cathodoluminescence thermometry

Thermal properties have an outsized impact on efficiency and sensitivity of devices with nanoscale structures, such as in integrated electronic circuits. A number of thermal conductivity measurements for semiconductor nanostructures exist, but are hindered by the diffraction limit of light, the need for transducer layers, the slow-scan rate of probes, ultra-thin sample requirements, or extensive fabrication. Here, we overcome these limitations by extracting temperature from measurements of bandgap cathodoluminescence in GaN nanowires with spatial resolution limited by the electron cascade, and use this to determine thermal conductivities in the range of 19-68 W/m*K in three new ways. The electron beam acts simultaneously as a temperature probe and as a controlled delta-function-like heat source to measure thermal conductivities using steady-state methods, and we introduce a frequency-domain method using pulsed electron beam excitation. The different thermal conductivity measurements we explore agree within error where comparable. Our results provide novel methods of measuring thermal properties that allow for rapid, in-situ, high-resolution measurements of integrated circuits and semiconductor nanodevices, and open the door for electron-beam based nanoscale phonon transport studies.

cond-mat.mes-hall

Photon statistics of incoherent cathodoluminescence with continuous and pulsed electron beams

Photon bunching in incoherent cathodoluminescence (CL) spectroscopy originates from the fact that a single high-energy electron can generate multiple photons when interacting with a material, thus revealing key properties of electron-matter excitation. Contrary to previous works based on Monte-Carlo modelling, here we present a fully analytical model describing the amplitude and shape of the second order autocorrelation function ($g^{(2)}(τ)$) for continuous and pulsed electron beams. Moreover, we extend the analysis of photon bunching to ultrashort electron pulses, in which up to 500 electrons per pulse excite the sample within a few picoseconds. We obtain a simple equation relating the bunching strength ($g^{(2)}(0)$ to the electron excitation efficiency ($γ$), electron beam current, emitter decay lifetime and pulse duration, in the case of pulsed electron beams. The analytical model shows good agreement with experimental data obtained on InGaN/GaN quantum wells using continuous, ns-pulsed (using beam blanker) and ultrashort ps-pulsed (using photoemission) electron beams. We extract excitation efficiencies of 0.13 and 0.05 for 10 and 8 keV electron beams, respectively, and we observe that non-linear effects play no compelling role even after excitation with ultrashort and dense electron cascades in the quantum wells.

physics.optics

Detailed-balance efficiency limits of two-terminal perovskite/silicon tandem solar cells with planar and Lambertian spectral splitters

We derive the photovoltaic conversion efficiency limit for two-terminal tandem solar cells with a perovskite top cell and silicon bottom cell with an embedded spectrum splitter. For large-bandgap top-cells a spectrum splitter strongly enhances the efficiency because of enhanced light absorption and trapping. A Lambertian spectral splitter shows a significantly improved effect compared to a planar splitter: we find an ideal efficiency enhancement in the thermodynamic limit for a 500 nm thick top cell of 6% absolute for bandgaps above 1.75 eV. Vice versa, the use of a spectral splitter geometry enables the use of a thinner top cell. Using experimental parameters for perovskite cells we show that for a top-cell bandgap of 1.77 eV a 2.8% absolute efficiency can be gained. The calculations in this work show that integration of a spectral splitter into perovskite/silicon tandem cells with a top bandgap above 1.7 eV can lead to a large increase in efficiency, even with realistic experimental losses and non-unity reflection of the spectral splitter.

physics.optics

Four-terminal perovskite/silicon tandem solar cell with integrated Mie-resonant spectral splitter metagrating

A spectral splitting, light trapping dielectric metasurface is designed, fabricated and integrated into a four-terminal perovskite/silicon hybrid tandem solar cell to increase the absorption of light close to the bandgap of the perovskite top cell, and enhance transmission of the near-infrared spectral band towards the bottom cell. The metagrating is composed of a hexagonal array of unit cells of 150-nm-tall hydrogenated amorphous silicon trimer nanostructures with dielectric Mie resonances in the 600-800 nm perovskite near-gap region, made using substrate-conformal imprint lithography. By tailoring the metasurface resonant scattering modes and their interference with the direct reflection paths we minimize specular reflection and obtain high diffraction efficiency that leads to improved light trapping in the perovskite top cell. The measured short-circuit current increase in the perovskite top cell is 0.5 mA/cm2 corresponding to an estimated efficiency gain of 0.26% (absolute) for the metasurface-integrated 4T perovskite/silicon tandem cell. Simulations for a further optimized metasurface spectrum splitter geometry predict a short-circuit current gain in the perovskite top cell of 1.4 mA/cm2 and an efficiency gain for the 4T tandem cell of 0.4% (absolute). The metagrating approach for simultaneous spectral splitting, light trapping and reflectance reduction provides a flexible platform that can be applied to many tandem cell geometries.

physics.optics

Spontaneous and Stimulated Electron-Photon Interactions in Nanoscale Plasmonic Near Fields

We demonstrate spatially-resolved measurements of spontaneous and stimulated electron-photon interactions in nanoscale optical near fields using electron energy-loss spectroscopy (EELS), cathodoluminescence spectroscopy (CL), and photon-induced near-field electron microscopy (PINEM). Specifically, we study resonant surface plasmon modes that are tightly confined to the tip apexes of an Au nanostar, enabling a direct correlation of EELS, CL, and PINEM on the same physical structure at the nanometer length scale. Complemented by numerical electromagnetic boundary-element method calculations, we discuss the spontaneous and stimulated electron-photon interaction strength and spatial dependence of our EELS, CL and PINEM distributions. We demonstrate that in the limit of an isolated tip mode, spatial variations in the electron-near field coupling are fully determined by the modal electric field profile, irrespective of the spontaneous (in EELS and CL) or stimulated nature (in PINEM) of the process. Yet we show that coupling to the tip modes crucially depends on the incident electron energy with a maximum at a few keV, depending on the proximity of the interaction to the tip apex. Our results provide elementary insights into spontaneous and stimulated electron-light-matter interactions at the nanoscale that have key implications for research on (quantum) coherent optical phenomena in electron microscopy.

physics.optics

Electron-induced state conversion in diamond NV centers measured with pump-probe cathodoluminescence spectroscopy

Nitrogen-vacancy (NV) centers in diamond are reliable single-photon emitters, with applications in quantum technologies and metrology. Two charge states are known for NV centers: NV$^0$ and NV$^-$, with the latter being mostly studied due to its long electron spin coherence time. Therefore, control over the charge state of the NV centers is essential. However, an understanding of the dynamics between the different states still remains challenging. Here, conversion from NV$^-$ to NV$^0$ due to electron-induced carrier generation is shown. Ultrafast pump-probe cathodoluminescence spectroscopy is presented for the first time, with electron pulses as pump, and laser pulses as probe, to prepare and read out the NV states. The experimental data is explained with a model considering carrier dynamics (0.8 ns), NV$^0$ spontaneous emission (20 ns) and NV$^0$ $\rightarrow$NV$^-$ back transfer (500 ms). The results provide new insights into the NV$^-$$\leftrightarrow$NV$^0$ conversion dynamics, and into the use of pump-probe cathodoluminescence as a nanoscale NV characterization tool.

physics.optics

Electron Beam Spectroscopy for Nanophotonics

Progress in electron-beam spectroscopies has recently enabled the study of optical excitations with combined space, energy and time resolution in the nanometer, millielectronvolt and femtosecond domain, thus providing unique access into nanophotonic structures and their detailed optical responses. These techniques rely on $\approx$ 1-300 keV electron beams focused at the sample down to sub-nanometer spots, temporally compressed in wavepackets a few femtoseconds long, and in some cases controlled by ultrafast light pulses. The electrons undergo energy losses and gains, also giving rise to cathodoluminescence light emission, which are recorded to reveal the optical landscape along the beam path. This review portraits these advances, with a focus on coherent excitations, emphasizing the increasing level of control over the electron wave functions and ensuing applications in the study and technological use of optically resonant modes and polaritons in nanoparticles, 2D materials and engineered nanostructures.

physics.optics

High-index dielectric metasurfaces performing mathematical operations

Image processing and edge detection are at the core of several newly emerging technologies, such as augmented reality, autonomous driving and more generally object recognition. Image processing is typically performed digitally using integrated electronic circuits and algorithms, implying fundamental size and speed limitations, as well as significant power needs. On the other hand, it can also be performed in a low-power analog fashion using Fourier optics, requiring however bulky optical components. Here, we introduce dielectric metasurfaces that perform optical image edge detection in the analog domain using a subwavelength geometry that can be readily integrated with detectors. The metasurface is composed of a suitably engineered array of nanobeams designed to perform either 1st- or 2nd-order spatial differentiation. We experimentally demonstrate the 2nd-derivative operation on an input image, showing the potential of all-optical edge detection using a silicon metasurface geometry working at a numerical aperture as large as 0.35.

physics.optics