arXiv subjects

Albert Tarancon

Publications and source records attributed to Albert Tarancon.

9 recordsLinked to original sources

arXiv2026

Structure-driven analog optical control in ion-pumped SrFeO$_{3-\delta}$ thin-film devices

Electrochromic devices (ECDs) offer a compelling route toward low-power, non-emissive optical modulators with nonvolatile states. However, their widespread implementation is hindered by limitations in operating voltage, switching speed, color tunability, and long-term stability. Mixed ionic-electronic conductors (MIECs) provide a promising alternative platform, enabling optical modulation through ion-driven redox and structural transformations. Oxygen-based MIECs offer enhanced durability, environmental robustness, and compatibility with oxide electronics and silicon photonics, yet remain largely underexplored for electrochromic and photonic applications. Here, we demonstrate structure-driven analog optical control in an ion-pumped SrFeO$_{3-\delta}$ thin-film device by undergoing reversible oxygen-driven phase transitions between brownmillerite and perovskite structures. Phase transition is accompanied by pronounced changes in its electronic structure and optical constants. By harnessing these ion-induced structural transformations and integrating an optically passive Al$_2$O$_3$ interference layer, we achieve continuous and reversible modulation of optical transmittance and color. These results provide a general framework for ion-driven analog photonic and electrochromic devices and highlight the potential of oxygen-based MIECs for next-generation ionochromic systems compatible with silicon-based photonic platforms.

physics.app-ph↗

arXiv2023

Insights into the LiMn2O4 Cathode Stability in Aqueous Electrolyte

LiMn2O4 (LMO), cathodes present large stability when cycled in aqueous electrolytes, contrasting its behavior in conventional organic electrolytes in Lithium-ion batteries (LIBs). To elucidate the mechanisms underlying this distinctive behavior, we employ unconventional characterization techniques, including Variable Energy Positron Annihilation Lifetime Spectroscopy (VEPALS), Tip-Enhanced Raman Spectroscopy (TERS) and macro-Raman Spectroscopy (with mm-size laser spot). These still rather unexplored techniques in the battery field provide complementary information across different length scales, revealing previously hidden features. VEPALS offers atomic-scale insights, uncovering cationic defects and sub-nanometer pores that tend to collapse with cycling. TERS, operating at the nanometric range at the surface, captured the presence of Mn3O4 and its dissolution with cycling, elucidating dynamic changes during operation. Additionally, TERS highlights SO42- accumulation at grain boundaries. Macro-Raman Spectroscopy focuses on the micrometer scale, depicting small changes in the cathode's long-range order, suggesting a slow but progressive loss of crystalline quality under operation. Integrating these techniques provides a comprehensive assessment of LMO cathode stability in aqueous electrolytes, offering multifaceted insights into phase and defect evolution that can help to rationalize the origin of such stability when compared to conventional organic electrolytes. Our findings advance the understanding of LMO behavior in aqueous environments and provide guidelines for its development for next-generation LIBs.

cond-mat.mtrl-sci↗

arXiv2021

Pushing the Study of Point Defects in Thin Film Ferrites to Low Temperatures Using In Situ Ellipsometry

Unveiling point defects concentration in transition metal oxide thin films is essential to understand and eventually control their functional properties, employed in an increasing number of applications and devices. Despite this unquestionable interest, there is a lack of available experimental techniques able to estimate the defect chemistry and equilibrium constants in such oxides at intermediate-to-low temperatures. In this study, the defect chemistry of a relevant material such as La1-xSrxFeO3-d (LSF) with (x = 0.2, 0.4 and 0.5 (LSF20, LSF40 and LSF50 respectively) is obtained by using a novel in situ spectroscopic ellipsometry approach applied to thin films. Through this technique, the concentration of holes in LSF is correlated to measured optical properties and its evolution with temperature and oxygen partial pressure is determined. In this way, a systematic description of defect chemistry in LSF thin films in the temperature range from 350dC to 500dC is obtained for the first time, which represents a step forward in the understanding of LSF20, LSF40 and LSF50 for emerging low temperature applications.

cond-mat.mtrl-sci↗

arXiv2021

Route to High-Performance Micro-solid Oxide Fuel Cells on Metallic Substrates

Micro-solid oxide fuel cells based on thin films have strong potential for use in portable power devices. However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures. Devices based on bulk metal substrates overcome these limitations, though performance is hindered by the challenge of growing state-of-the-art epitaxial materials on metals. Here, we demonstrate for the first time the growth of epitaxial cathode materials on metal substrates (stainless steel) commercially supplied with epitaxial electrolyte layers (1.5 {um (Y2O3)0.15(ZrO2)0.85 (YSZ) + 50 nm CeO2). We create epitaxial mesoporous cathodes of (La0.60Sr0.40)0.95Co0.20Fe0.80O3 (LSCF) on the substrate by growing LSCF/MgO vertically aligned nanocomposite films by pulsed laser deposition, followed by selectively etching out the MgO. To enable valid comparison with the literature, the cathodes are also grown on single-crystal substrates, confirming state-of-the-art performance with an area specific resistance of 100ohmegacm2 at 500dC and activation energy down to 0.97 eV. The work marks an important step toward the commercialization of high-performance micro-solid oxide fuel cells for portable power applications.

physics.app-ph↗

arXiv2019

Unraveling Bulk and Grain Boundary Electrical Properties in La0.8Sr0.2Mn1-yO3 Thin Films

Grain boundaries in Sr-doped LaMnO3 thin films have been shown to strongly influence the electronic and oxygen mass transport properties, being able to profoundly modify the nature of the material. The unique behaviour of the grain boundaries can be correlated with substantial modifications of the cation concentration at the interfaces, which can be tuned by changing the overall cationic ratio in the films. In this work, we study the electronic properties of La0.8Sr0.2Mn1-yO3 thin films with variable Mn content. The influence of the cationic composition on the grain boundary and grain bulk electronic properties is elucidated by studying the manganese valence state evolution using spectroscopy techniques and by confronting the electronic properties of epitaxial and polycrystalline films. Substantial differences in the electronic conduction mechanism are found in the presence of grain boundaries and depending on the manganese content. Moreover, the unique defect chemistry of the nanomaterial is elucidated by measuring the electrical resistance of the thin films as a function of oxygen partial pressure, disclosing the importance of the cationic local non-stoichiometry on the thin films behavior.

cond-mat.mtrl-sci↗

arXiv2018

Nanonionics and interfaces for energy and information technologies

There is a growing interest in the development of functional metal oxides with mixed ionic electronic conduction for their application in different strategic fields. In particular, ionic transport-related phenomena are of primary importance in energy transformation and storage devices, such as solid oxides fuel cells (SOFC) or batteries. Traditionally, the main issue that hindered a wide spread of solid state electrochemical devices is the slow ionic conduction and the reduced number of families of materials with pure ionic conductivity able to play the role of the electrolyte. This is due to the low mobility of the ionic charge carriers and their mechanical and coulombic interactions with their host crystal structures. For relatively big and charged ions, e.g. O2- or Na+, the low ionic conductivity imposes operating at high temperatures, which is incompatible with some applications such as portable electronics.

cond-mat.mtrl-sci↗

arXiv2018

Engineering mass transport properties in oxide ionic and mixed ionic electronic thin film ceramic conductors for energy applications

New emerging disciplines such as Nanoionics and Iontronics are dealing with the exploitation of mesoscopic size effects in materials, which become visible (if not predominant) when downsizing the system to the nanoscale. Driven by the worldwide standardisation of thin film deposition techniques, the access to radically different properties than those found in the bulk macroscopic systems can be accomplished. This opens up promising approaches for the development of advanced microdevices, by taking advantage of the nanostructural deviations found in nanometre sized, interface dominated materials compared to the ideal relaxed structure of the bulk. A completely new set of functionalities can be explored, with implications in many different fields such as energy conversion and storage, or information technologies. This manuscript reviews the strategies, employed and foreseen, for engineering mass transport properties in thin film ceramics, with the focus in oxide ionic and mixed ionic electronic conductors and their application in micro power sources.

cond-mat.mtrl-sci↗

arXiv2018

Insights into the enhancement of oxygen mass transport properties of strontium doped lanthanum manganite interface-dominated thin films

Strontium doped lanthanum manganite thin films were deposited by pulsed laser deposition on yttria stabilized zirconia single crystals for a comprehensive electrochemical characterization of the material acting as a cathode. A physically meaningful electrical model was employed to fit the electrochemical impedance spectroscopy results in order to extract the main oxygen mass transport parameters as a function of the temperature and oxygen partial pressure. The oxygen diffusion and surface exchange coefficients extracted from the analysis showed several orders of magnitude of enhancement with respect to the bulk values reported in the literature and an unexpectedly low dependence with the oxygen partial pressure. Different observations were combined to propose a mechanism for the enhanced incorporation of oxygen in interface dominated thin films mainly based on the high concentration of oxygen vacancies expected in the grain boundaries.

cond-mat.mtrl-sci↗

arXiv2018

Unveiling the outstanding oxygen mass transport properties of Mn-rich perovskites in grain boundary-dominated La0.8Sr0.2(Mn1-xCox)0.85O3-d nanostructures

Ion transport in solid-state devices is of great interest for current and future energy and information technologies. A superior enhancement of several orders of magnitude of the oxygen diffusivity has been recently reported for grain boundaries in lanthanum strontium manganites. However, the significance and extent of this unique phenomenon is not yet established. Here, we fabricate a thin film continuous composition map of the La0.8Sr0.2(Mn1-xCox)0.85O3-d family revealing a substantial enhancement of the grain boundary oxygen mass transport properties for the entire range of compositions. Through isotope-exchange depth profiling coupled to secondary ion mass spectroscopy, we show that this excellent performance is not directly linked to the bulk of the material but to the intrinsic nature of the grain boundary. In particular, the great increase of the oxygen diffusion in Mn-rich compositions unveils an unprecedented catalytic performance in the field of Mixed Ionic Electronic Conductors. These results present grain boundaries engineering as a novel strategy for designing highly performing materials for solid state ionics based devices.

cond-mat.mtrl-sci↗