Searcharxiv⌕ Search

arXiv subjects

Alberto Dalla Libera

Publications and source records attributed to Alberto Dalla Libera.

At least 19 recordsLinked to original sources
arXiv2026

Hierarchical Topology-Aware Planning and Control of Underwater Vehicle-Manipulator Systems in Confined Environments

This paper addresses autonomous intervention with an underwater vehicle--manipulator system (UVMS) in confined, cluttered, and partially known environments, where poor maneuverability, narrow passages, and uncertain execution may cause the robot to enter unrecoverable regions. We propose MANTA, a three-layer hierarchical planning-and-control framework that couples passage accessibility, manipulation feasibility, and closed-loop execution. The first layer performs global connectivity reasoning in a conservative reduced base space to extract traversable corridor candidates toward the task region. The second layer refines each candidate corridor by jointly optimizing the continuous base motion and arm trajectory, producing a collision-free base--arm trajectory. The third layer learns a reach-and-hold base policy using Gaussian-process model-based reinforcement learning (MBRL) through MC-PILCO, enabling trajectory tracking and station keeping at the planned manipulation state. During execution, the framework monitors map updates and can trigger recovery and route repair when the active passage becomes infeasible. MANTA is evaluated in confined UVMS planning and closed-loop tracking experiments. Across 120 matched planning queries, it achieves higher task success than full-state sampling-based baselines while producing larger clearance margins and lower arm motion. The learned MC-PILCO policy further reduces position and yaw tracking errors on both training and unseen tube-like references. These results show MANTA as a structured and data-efficient framework for safe autonomous underwater intervention in caves, tubes, and cluttered subsea structures.

cs.RO↗
arXiv2025

A Robust Controller based on Gaussian Processes for Robotic Manipulators with Unknown Uncertainty

In this paper, we propose a novel learning-based robust feedback linearization strategy to ensure precise trajectory tracking for an important family of Lagrangian systems. We assume a nominal knowledge of the dynamics is given but no a-priori bounds on the model mismatch are available. In our approach, the key ingredient is the adoption of a regression framework based on Gaussian Processes (GPR) to estimate the model mismatch. This estimate is added to the outer loop of a classical feedback linearization scheme based on the nominal knowledge available. Then, to compensate for the residual uncertainty, we robustify the controller including an additional term whose size is designed based on the variance provided by the GPR framework. We proved that, with high probability, the proposed scheme is able to guarantee asymptotic tracking of a desired trajectory. We tested numerically our strategy on a 2 degrees of freedom planar robot.

cs.RO↗
arXiv2025

Towards Autonomous Reinforcement Learning for Real-World Robotic Manipulation with Large Language Models

Recent advancements in Large Language Models (LLMs) and Visual Language Models (VLMs) have significantly impacted robotics, enabling high-level semantic motion planning applications. Reinforcement Learning (RL), a complementary paradigm, enables agents to autonomously optimize complex behaviors through interaction and reward signals. However, designing effective reward functions for RL remains challenging, especially in real-world tasks where sparse rewards are insufficient and dense rewards require elaborate design. In this work, we propose Autonomous Reinforcement learning for Complex Human-Informed Environments (ARCHIE), an unsupervised pipeline leveraging GPT-4, a pre-trained LLM, to generate reward functions directly from natural language task descriptions. The rewards are used to train RL agents in simulated environments, where we formalize the reward generation process to enhance feasibility. Additionally, GPT-4 automates the coding of task success criteria, creating a fully automated, one-shot procedure for translating human-readable text into deployable robot skills. Our approach is validated through extensive simulated experiments on single-arm and bi-manual manipulation tasks using an ABB YuMi collaborative robot, highlighting its practicality and effectiveness. Tasks are demonstrated on the real robot setup.

cs.RO↗
arXiv2025

Accelerating Model-Based Reinforcement Learning using Non-Linear Trajectory Optimization

This paper addresses the slow policy optimization convergence of Monte Carlo Probabilistic Inference for Learning Control (MC-PILCO), a state-of-the-art model-based reinforcement learning (MBRL) algorithm, by integrating it with iterative Linear Quadratic Regulator (iLQR), a fast trajectory optimization method suitable for nonlinear systems. The proposed method, Exploration-Boosted MC-PILCO (EB-MC-PILCO), leverages iLQR to generate informative, exploratory trajectories and initialize the policy, significantly reducing the number of required optimization steps. Experiments on the cart-pole task demonstrate that EB-MC-PILCO accelerates convergence compared to standard MC-PILCO, achieving up to $\bm{45.9\%}$ reduction in execution time when both methods solve the task in four trials. EB-MC-PILCO also maintains a $\bm{100\%}$ success rate across trials while solving the task faster, even in cases where MC-PILCO converges in fewer iterations.

cs.LG↗
arXiv2025

Learning global control of underactuated systems with Model-Based Reinforcement Learning

This short paper describes our proposed solution for the third edition of the "AI Olympics with RealAIGym" competition, held at ICRA 2025. We employed Monte-Carlo Probabilistic Inference for Learning Control (MC-PILCO), an MBRL algorithm recognized for its exceptional data efficiency across various low-dimensional robotic tasks, including cart-pole, ball \& plate, and Furuta pendulum systems. MC-PILCO optimizes a system dynamics model using interaction data, enabling policy refinement through simulation rather than direct system data optimization. This approach has proven highly effective in physical systems, offering greater data efficiency than Model-Free (MF) alternatives. Notably, MC-PILCO has previously won the first two editions of this competition, demonstrating its robustness in both simulated and real-world environments. Besides briefly reviewing the algorithm, we discuss the most critical aspects of the MC-PILCO implementation in the tasks at hand: learning a global policy for the pendubot and acrobot systems.

cs.RO↗
arXiv2025

Reinforcement Learning for Robust Athletic Intelligence: Lessons from the 2nd 'AI Olympics with RealAIGym' Competition

In the field of robotics many different approaches ranging from classical planning over optimal control to reinforcement learning (RL) are developed and borrowed from other fields to achieve reliable control in diverse tasks. In order to get a clear understanding of their individual strengths and weaknesses and their applicability in real world robotic scenarios is it important to benchmark and compare their performances not only in a simulation but also on real hardware. The '2nd AI Olympics with RealAIGym' competition was held at the IROS 2024 conference to contribute to this cause and evaluate different controllers according to their ability to solve a dynamic control problem on an underactuated double pendulum system with chaotic dynamics. This paper describes the four different RL methods submitted by the participating teams, presents their performance in the swing-up task on a real double pendulum, measured against various criteria, and discusses their transferability from simulation to real hardware and their robustness to external disturbances.

cs.RO↗
arXiv2025

Data efficient Robotic Object Throwing with Model-Based Reinforcement Learning

Pick-and-place (PnP) operations, featuring object grasping and trajectory planning, are fundamental in industrial robotics applications. Despite many advancements in the field, PnP is limited by workspace constraints, reducing flexibility. Pick-and-throw (PnT) is a promising alternative where the robot throws objects to target locations, leveraging extrinsic resources like gravity to improve efficiency and expand the workspace. However, PnT execution is complex, requiring precise coordination of high-speed movements and object dynamics. Solutions to the PnT problem are categorized into analytical and learning-based approaches. Analytical methods focus on system modeling and trajectory generation but are time-consuming and offer limited generalization. Learning-based solutions, in particular Model-Free Reinforcement Learning (MFRL), offer automation and adaptability but require extensive interaction time. This paper introduces a Model-Based Reinforcement Learning (MBRL) framework, MC-PILOT, which combines data-driven modeling with policy optimization for efficient and accurate PnT tasks. MC-PILOT accounts for model uncertainties and release errors, demonstrating superior performance in simulations and real-world tests with a Franka Emika Panda manipulator. The proposed approach generalizes rapidly to new targets, offering advantages over analytical and Model-Free methods.

cs.RO↗
arXiv2024

Exploiting Estimation Bias in Clipped Double Q-Learning for Continous Control Reinforcement Learning Tasks

Continuous control Deep Reinforcement Learning (RL) approaches are known to suffer from estimation biases, leading to suboptimal policies. This paper introduces innovative methods in RL, focusing on addressing and exploiting estimation biases in Actor-Critic methods for continuous control tasks, using Deep Double Q-Learning. We design a Bias Exploiting (BE) mechanism to dynamically select the most advantageous estimation bias during training of the RL agent. Most State-of-the-art Deep RL algorithms can be equipped with the BE mechanism, without hindering performance or computational complexity. Our extensive experiments across various continuous control tasks demonstrate the effectiveness of our approaches. We show that RL algorithms equipped with this method can match or surpass their counterparts, particularly in environments where estimation biases significantly impact learning. The results underline the importance of bias exploitation in improving policy learning in RL.

cs.LG↗
arXiv2024

A Black-Box Physics-Informed Estimator based on Gaussian Process Regression for Robot Inverse Dynamics Identification

Learning the inverse dynamics of robots directly from data, adopting a black-box approach, is interesting for several real-world scenarios where limited knowledge about the system is available. In this paper, we propose a black-box model based on Gaussian Process (GP) Regression for the identification of the inverse dynamics of robotic manipulators. The proposed model relies on a novel multidimensional kernel, called \textit{Lagrangian Inspired Polynomial} (\kernelInitials{}) kernel. The \kernelInitials{} kernel is based on two main ideas. First, instead of directly modeling the inverse dynamics components, we model as GPs the kinetic and potential energy of the system. The GP prior on the inverse dynamics components is derived from those on the energies by applying the properties of GPs under linear operators. Second, as regards the energy prior definition, we prove a polynomial structure of the kinetic and potential energy, and we derive a polynomial kernel that encodes this property. As a consequence, the proposed model allows also to estimate the kinetic and potential energy without requiring any label on these quantities. Results on simulation and on two real robotic manipulators, namely a 7 DOF Franka Emika Panda, and a 6 DOF MELFA RV4FL, show that the proposed model outperforms state-of-the-art black-box estimators based both on Gaussian Processes and Neural Networks in terms of accuracy, generality and data efficiency. The experiments on the MELFA robot also demonstrate that our approach achieves performance comparable to fine-tuned model-based estimators, despite requiring less prior information.

cs.RO↗
arXiv2024

Adaptive Robust Controller for handling Unknown Uncertainty of Robotic Manipulators

The ability to achieve precise and smooth trajectory tracking is crucial for ensuring the successful execution of various tasks involving robotic manipulators. State-of-the-art techniques require accurate mathematical models of the robot dynamics, and robustness to model uncertainties is achieved by relying on precise bounds on the model mismatch. In this paper, we propose a novel adaptive robust feedback linearization scheme able to compensate for model uncertainties without any a-priori knowledge on them, and we provide a theoretical proof of convergence under mild assumptions. We evaluate the method on a simulated RR robot. First, we consider a nominal model with known model mismatch, which allows us to compare our strategy with state-of-the-art uncertainty-aware methods. Second, we implement the proposed control law in combination with a learned model, for which uncertainty bounds are not available. Results show that our method leads to performance comparable to uncertainty-aware methods while requiring less prior knowledge.

cs.RO↗
arXiv2023

Forward Dynamics Estimation from Data-Driven Inverse Dynamics Learning

In this paper, we propose to estimate the forward dynamics equations of mechanical systems by learning a model of the inverse dynamics and estimating individual dynamics components from it. We revisit the classical formulation of rigid body dynamics in order to extrapolate the physical dynamical components, such as inertial and gravitational components, from an inverse dynamics model. After estimating the dynamical components, the forward dynamics can be computed in closed form as a function of the learned inverse dynamics. We tested the proposed method with several machine learning models based on Gaussian Process Regression and compared them with the standard approach of learning the forward dynamics directly. Results on two simulated robotic manipulators, a PANDA Franka Emika and a UR10, show the effectiveness of the proposed method in learning the forward dynamics, both in terms of accuracy as well as in opening the possibility of using more structured~models.

cs.RO↗
arXiv2023

A Learning-based Nonlinear Model Predictive Controller for a Real Go-Kart based on Black-box Dynamics Modeling through Gaussian Processes

Lately, Nonlinear Model Predictive Control (NMPC)has been successfully applied to (semi-) autonomous driving problems and has proven to be a very promising technique. However, accurate control models for real vehicles could require costly and time-demanding specific measurements. To address this problem, the exploitation of system data to complement or derive the prediction model of the NMPC has been explored, employing learning dynamics approaches within Learning-based NMPC (LbNMPC). Its application to the automotive field has focused on discrete grey-box modeling, in which a nominal dynamics model is enhanced by the data-driven component. In this manuscript, we present an LbNMPC controller for a real go-kart based on a continuous black-box model of the accelerations obtained by Gaussian Processes. We show the effectiveness of the proposed approach by testing the controller on a real go-kart vehicle, highlighting the approximation steps required to get an exploitable GP model on a real-time application.

eess.SY↗
arXiv2023

Learning Control from Raw Position Measurements

We propose a Model-Based Reinforcement Learning (MBRL) algorithm named VF-MC-PILCO, specifically designed for application to mechanical systems where velocities cannot be directly measured. This circumstance, if not adequately considered, can compromise the success of MBRL approaches. To cope with this problem, we define a velocity-free state formulation which consists of the collection of past positions and inputs. Then, VF-MC-PILCO uses Gaussian Process Regression to model the dynamics of the velocity-free state and optimizes the control policy through a particle-based policy gradient approach. We compare VF-MC-PILCO with our previous MBRL algorithm, MC-PILCO4PMS, which handles the lack of direct velocity measurements by modeling the presence of velocity estimators. Results on both simulated (cart-pole and UR5 robot) and real mechanical systems (Furuta pendulum and a ball-and-plate rig) show that the two algorithms achieve similar results. Conveniently, VF-MC-PILCO does not require the design and implementation of state estimators, which can be a challenging and time-consuming activity to be performed by an expert user.

cs.RO↗
arXiv2022

Model-Based Policy Search Using Monte Carlo Gradient Estimation with Real Systems Application

In this paper, we present a Model-Based Reinforcement Learning (MBRL) algorithm named \emph{Monte Carlo Probabilistic Inference for Learning COntrol} (MC-PILCO). The algorithm relies on Gaussian Processes (GPs) to model the system dynamics and on a Monte Carlo approach to estimate the policy gradient. This defines a framework in which we ablate the choice of the following components: (i) the selection of the cost function, (ii) the optimization of policies using dropout, (iii) an improved data efficiency through the use of structured kernels in the GP models. The combination of the aforementioned aspects affects dramatically the performance of MC-PILCO. Numerical comparisons in a simulated cart-pole environment show that MC-PILCO exhibits better data efficiency and control performance w.r.t. state-of-the-art GP-based MBRL algorithms. Finally, we apply MC-PILCO to real systems, considering in particular systems with partially measurable states. We discuss the importance of modeling both the measurement system and the state estimators during policy optimization. The effectiveness of the proposed solutions has been tested in simulation and on two real systems, a Furuta pendulum and a ball-and-plate rig.

cs.LG↗
arXiv2021

Control of Mechanical Systems via Feedback Linearization Based on Black-Box Gaussian Process Models

In this paper, we consider the use of black-box Gaussian process (GP) models for trajectory tracking control based on feedback linearization, in the context of mechanical systems. We considered two strategies. The first computes the control input directly by using the GP model, whereas the second computes the input after estimating the individual components of the dynamics. We tested the two strategies on a simulated manipulator with seven degrees of freedom, also varying the GP kernel choice. Results show that the second implementation is more robust w.r.t. the kernel choice and model inaccuracies. Moreover, as regards the choice of kernel, the obtained performance shows that the use of a structured kernel, such as a polynomial kernel, is advantageous, because of its effectiveness with both strategies.

eess.SY↗
arXiv2021

Model-based Policy Search for Partially Measurable Systems

In this paper, we propose a Model-Based Reinforcement Learning (MBRL) algorithm for Partially Measurable Systems (PMS), i.e., systems where the state can not be directly measured, but must be estimated through proper state observers. The proposed algorithm, named Monte Carlo Probabilistic Inference for Learning COntrol for Partially Measurable Systems (MC-PILCO4PMS), relies on Gaussian Processes (GPs) to model the system dynamics, and on a Monte Carlo approach to update the policy parameters. W.r.t. previous GP-based MBRL algorithms, MC-PILCO4PMS models explicitly the presence of state observers during policy optimization, allowing to deal PMS. The effectiveness of the proposed algorithm has been tested both in simulation and in two real systems.

cs.RO↗
arXiv2020

Model-Based Reinforcement Learning for Physical Systems Without Velocity and Acceleration Measurements

In this paper, we propose a derivative-free model learning framework for Reinforcement Learning (RL) algorithms based on Gaussian Process Regression (GPR). In many mechanical systems, only positions can be measured by the sensing instruments. Then, instead of representing the system state as suggested by the physics with a collection of positions, velocities, and accelerations, we define the state as the set of past position measurements. However, the equation of motions derived by physical first principles cannot be directly applied in this framework, being functions of velocities and accelerations. For this reason, we introduce a novel derivative-free physically-inspired kernel, which can be easily combined with nonparametric derivative-free Gaussian Process models. Tests performed on two real platforms show that the considered state definition combined with the proposed model improves estimation performance and data-efficiency w.r.t. traditional models based on GPR. Finally, we validate the proposed framework by solving two RL control problems for two real robotic systems.

cs.LG↗