arXiv subjects

Alberto Montanaro

Publications and source records attributed to Alberto Montanaro.

7 recordsLinked to original sources

arXiv2026

Design and Benchmarking of a Quantum Photonic Chip

We present the design and benchmarking of RP000, a quantum photonic processor capable of encoding a quantum system in the degrees of freedom of single photons, based on standard CMOS-compatible manufacturing processes, and working at room temperature. We benchmark it against machine learning tasks, evaluating three quantum-classical architectures of increasing complexity. Our experimental results and simulations show that RP000 achieves higher accuracy than classical networks of comparable size in multiple use cases. Compared to a superconducting quantum processor, RP000 exhibits superior noise tolerance. These findings demonstrate that RP000 can provide a scalable route toward efficient quantum applications.

quant-ph↗

arXiv2026

C-band 160 Gbs-1 Zero-bias Graphene Photodetectors: Breaking the Responsivity-Bandwidth Trade-off by Heterostructure Engineering

Graphene photodetectors offer ultrafast response and broadband operation, but their responsivity is typically limited by rapid hot-carrier cooling, leading to a trade-off between sensitivity and speed. Here, we demonstrate that modifying the dielectric environment provides an effective route to control hot-carrier cooling and enhance device performance. By employing a WSe2 encapsulation architecture, we suppress out-of-plane energy dissipation, leading to an increased cooling length (~2.68 um) and a reduced heat-exchange coefficient. As a result, we obtain zero-bias graphene photodetectors with responsivities up to ~0.12 A/W (potentially ~0.4 A/W) while maintaining ultrafast operation beyond the setup-limited 110 GHz bandwidth. The devices enable direct detection at data rates of 120 Gb s-1 (NRZ) and 160 Gb s-1 (PAM-4), with performance achieved using minimal digital signal processing. These results establish dielectric engineering as a key design axis for controlling hot-carrier dynamics, enabling energy-efficient, high-speed optical receivers for next-generation interconnects and AI-driven data systems.

physics.optics↗

arXiv2023

High-speed Source-Device-Independent Quantum Random Number Generator on a Chip

A wide range of applications require, by hypothesis, to have access to a high-speed, private, and genuine random source. Quantum Random Number Generators (QRNGs) are currently the sole technology capable of producing true randomness. However, the bulkiness of current implementations significantly limits their adoption. In this work, we present a high-performance source-device independent QRNG leveraging a custom made integrated photonic chip. The proposed scheme exploits the properties of a heterodyne receiver to enhance security and integration to promote spatial footprint reduction while simplifying its implementation. This characteristics could represents a significant advancement toward the development of generators better suited to meet the demands of portable and space applications. The system can deliver secure random numbers at a rate greater than 20 Gbps with a reduced spatial and power footprint.

quant-ph↗

arXiv2021

Wafer-scale integration of graphene-based photonic devices

Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 μm. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices.

physics.app-ph↗

arXiv2020

Ultrafast, Zero-Bias, Graphene Photodetectors with Polymeric Gate Dielectric on Passive Photonic Waveguides

We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 $μ$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices.

physics.app-ph↗

arXiv2020

High-speed double layer graphene electro-absorption modulator on SOI waveguide

We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can satisfy the main requirements to be a competitive technology for photonics.

physics.app-ph↗

arXiv2019

Optoelectronic mixing with high frequency graphene transistors

Graphene is ideally suited for optoelectronic applications. It offers absorption at telecom wavelengths, high-frequency operation and CMOS-compatibility. We report optoelectronic mixing up to to 67GHz using a back-gated graphene field effect transistor (GFET). We also present a model to describe the resulting mixed current. These results pave the way for GETs optoelectronic mixers for mm-wave applications, such as telecommunications and RADAR/LIDAR systems.

physics.app-ph↗