arXiv subjects

Alberto Sangiovanni-Vincentelli

Publications and source records attributed to Alberto Sangiovanni-Vincentelli.

At least 37 records · Page 2Linked to original sources

arXiv2020

Adaptive Body Area Networks Using Kinematics and Biosignals

The increasing penetration of wearable and implantable devices necessitates energy-efficient and robust ways of connecting them to each other and to the cloud. However, the wireless channel around the human body poses unique challenges such as a high and variable path-loss caused by frequent changes in the relative node positions as well as the surrounding environment. An adaptive wireless body area network (WBAN) scheme is presented that reconfigures the network by learning from body kinematics and biosignals. It has very low overhead since these signals are already captured by the WBAN sensor nodes to support their basic functionality. Periodic channel fluctuations in activities like walking can be exploited by reusing accelerometer data and scheduling packet transmissions at optimal times. Network states can be predicted based on changes in observed biosignals to reconfigure the network parameters in real time. A realistic body channel emulator that evaluates the path-loss for everyday human activities was developed to assess the efficacy of the proposed techniques. Simulation results show up to 41% improvement in packet delivery ratio (PDR) and up to 27% reduction in power consumption by intelligent scheduling at lower transmission power levels. Moreover, experimental results on a custom test-bed demonstrate an average PDR increase of 20% and 18% when using our adaptive EMG- and heart-rate-based transmission power control methods, respectively. The channel emulator and simulation code is made publicly available at https://github.com/a-moin/wban-pathloss.

cs.NI↗

arXiv2020

ODRE Workshop: Probabilistic Dynamic Hard Real-Time Scheduling in HPC

Industry 4.0 is changing fundamentally the way data is collected, stored and analyzed in industrial processes. While this change enables novel application such as flexible manufacturing of highly customized products, the real-time control of these processes, however, has not yet realized its full potential. We believe that modern virtualization techniques, specifically application containers, present a unique opportunity to decouple control functionality from associated hardware. Through it, we can fully realize the potential for highly distributed and transferable industrial processes even with real-time constraints arising from time-critical sub-processes. In this paper, we present a specifically developed orchestration tool to manage the challenges and opportunities of shifting industrial control software from dedicated hardware to bare-metal servers or (edge) cloud computing platforms. Using off-the-shelf technology, the proposed tool can manage the execution of containerized applications on shared resources without compromising hard real-time execution determinism. Through first experimental results, we confirm the viability and analyzed the behavior of resource shared systems with strict real-time requirements. We then describe experiments set out to deliver expected results and gather performance, application scope and limits of the presented approach.

cs.DC↗

arXiv2020

Industrial Control via Application Containers:Maintaining determinism in IAAS

Industry 4.0 is changing fundamentally data collection, its storage and analysis in industrial processes, enabling novel application such as flexible manufacturing of highly customized products. Real-time control of these processes, however, has not yet realized its full potential in using the collected data to drive further development. Indeed, typical industrial control systems are tailored to the plant they need to control, making reuse and adaptation a challenge. In the past, the need to solve plant specific problems overshadowed the benefits of physically isolating a control system from its plant. We believe that modern virtualization techniques, specifically application containers, present a unique opportunity to decouple control from plants. This separation permits us to fully realize the potential for highly distributed, and transferable industrial processes even with real-time constraints arising from time-critical sub-processes. In this paper, we explore the challenges and opportunities of shifting industrial control software from dedicated hardware to bare-metal servers or (edge) cloud computing platforms using off-the-shelf technology. We present a migration architecture and show, using a specifically developed orchestration tool, that containerized applications can run on shared resources without compromising scheduled execution within given time constraints. Through latency and computational performance experiments we explore limits of three system setups and summarize lessons learned.

cs.DC↗

arXiv2019

Augmenting Monte Carlo Dropout Classification Models with Unsupervised Learning Tasks for Detecting and Diagnosing Out-of-Distribution Faults

The Monte Carlo dropout method has proved to be a scalable and easy-to-use approach for estimating the uncertainty of deep neural network predictions. This approach was recently applied to Fault Detection and Di-agnosis (FDD) applications to improve the classification performance on incipient faults. In this paper, we propose a novel approach of augmenting the classification model with an additional unsupervised learning task. We justify our choice of algorithm design via an information-theoretical analysis. Our experimental results on three datasets from diverse application domains show that the proposed method leads to improved fault detection and diagnosis performance, especially on out-of-distribution examples including both incipient and unknown faults.

cs.LG↗

arXiv2019

Industrial Control via Application Containers: Migrating from Bare-Metal to IAAS

We explore the challenges and opportunities of shifting industrial control software from dedicated hardware to bare-metal servers or cloud computing platforms using off the shelf technologies. In particular, we demonstrate that executing time-critical applications on cloud platforms is viable based on a series of dedicated latency tests targeting relevant real-time configurations.

cs.DC↗

arXiv2019

A Formalization of Robustness for Deep Neural Networks

Deep neural networks have been shown to lack robustness to small input perturbations. The process of generating the perturbations that expose the lack of robustness of neural networks is known as adversarial input generation. This process depends on the goals and capabilities of the adversary, In this paper, we propose a unifying formalization of the adversarial input generation process from a formal methods perspective. We provide a definition of robustness that is general enough to capture different formulations. The expressiveness of our formalization is shown by modeling and comparing a variety of adversarial attack techniques.

cs.LG↗

arXiv2019

A tractable ellipsoidal approximation for voltage regulation problems

We present a machine learning approach to the solution of chance constrained optimizations in the context of voltage regulation problems in power system operation. The novelty of our approach resides in approximating the feasible region of uncertainty with an ellipsoid. We formulate this problem using a learning model similar to Support Vector Machines (SVM) and propose a sampling algorithm that efficiently trains the model. We demonstrate our approach on a voltage regulation problem using standard IEEE distribution test feeders.

eess.SY↗

arXiv2019

A New Simulation Metric to Determine Safe Environments and Controllers for Systems with Unknown Dynamics

We consider the problem of extracting safe environments and controllers for reach-avoid objectives for systems with known state and control spaces, but unknown dynamics. In a given environment, a common approach is to synthesize a controller from an abstraction or a model of the system (potentially learned from data). However, in many situations, the relationship between the dynamics of the model and the \textit{actual system} is not known; and hence it is difficult to provide safety guarantees for the system. In such cases, the Standard Simulation Metric (SSM), defined as the worst-case norm distance between the model and the system output trajectories, can be used to modify a reach-avoid specification for the system into a more stringent specification for the abstraction. Nevertheless, the obtained distance, and hence the modified specification, can be quite conservative. This limits the set of environments for which a safe controller can be obtained. We propose SPEC, a specification-centric simulation metric, which overcomes these limitations by computing the distance using only the trajectories that violate the specification for the system. We show that modifying a reach-avoid specification with SPEC allows us to synthesize a safe controller for a larger set of environments compared to SSM. We also propose a probabilistic method to compute SPEC for a general class of systems. Case studies using simulators for quadrotors and autonomous cars illustrate the advantages of the proposed metric for determining safe environment sets and controllers.

cs.RO↗

arXiv2019

A One-Class Support Vector Machine Calibration Method for Time Series Change Point Detection

It is important to identify the change point of a system's health status, which usually signifies an incipient fault under development. The One-Class Support Vector Machine (OC-SVM) is a popular machine learning model for anomaly detection and hence could be used for identifying change points; however, it is sometimes difficult to obtain a good OC-SVM model that can be used on sensor measurement time series to identify the change points in system health status. In this paper, we propose a novel approach for calibrating OC-SVM models. The approach uses a heuristic search method to find a good set of input data and hyperparameters that yield a well-performing model. Our results on the C-MAPSS dataset demonstrate that OC-SVM can also achieve satisfactory accuracy in detecting change point in time series with fewer training data, compared to state-of-the-art deep learning approaches. In our case study, the OC-SVM calibrated by the proposed model is shown to be useful especially in scenarios with limited amount of training data.

cs.LG↗

arXiv2018

A Metric for Linear Temporal Logic

We propose a measure and a metric on the sets of infinite traces generated by a set of atomic propositions. To compute these quantities, we first map properties to subsets of the real numbers and then take the Lebesgue measure of the resulting sets. We analyze how this measure is computed for Linear Temporal Logic (LTL) formulas. An implementation for computing the measure of bounded LTL properties is provided and explained. This implementation leverages SAT model counting and effects independence checks on subexpressions to compute the measure and metric compositionally.

cs.LO↗

arXiv2018

Time Series Learning using Monotonic Logical Properties

Cyber-physical systems of today are generating large volumes of time-series data. As manual inspection of such data is not tractable, the need for learning methods to help discover logical structure in the data has increased. We propose a logic-based framework that allows domain-specific knowledge to be embedded into formulas in a parametric logical specification over time-series data. The key idea is to then map a time series to a surface in the parameter space of the formula. Given this mapping, we identify the Hausdorff distance between boundaries as a natural distance metric between two time-series data under the lens of the parametric specification. This enables embedding non-trivial domain-specific knowledge into the distance metric and then using off-the-shelf machine learning tools to label the data. After labeling the data, we demonstrate how to extract a logical specification for each label. Finally, we showcase our technique on real world traffic data to learn classifiers/monitors for slow-downs and traffic jams.

cs.LG↗

arXiv2018

Counterexample-Guided Data Augmentation

We present a novel framework for augmenting data sets for machine learning based on counterexamples. Counterexamples are misclassified examples that have important properties for retraining and improving the model. Key components of our framework include a counterexample generator, which produces data items that are misclassified by the model and error tables, a novel data structure that stores information pertaining to misclassifications. Error tables can be used to explain the model's vulnerabilities and are used to efficiently generate counterexamples for augmentation. We show the efficacy of the proposed framework by comparing it to classical augmentation techniques on a case study of object detection in autonomous driving based on deep neural networks.

cs.LG↗

arXiv2018

Context-Specific Validation of Data-Driven Models

With an increasing use of data-driven models to control robotic systems, it has become important to develop a methodology for validating such models before they can be deployed to design a controller for the actual system. Specifically, it must be ensured that the controller designed for a learned model would perform as expected on the actual physical system. We propose a context-specific validation framework to quantify the quality of a learned model based on a distance measure between the closed-loop actual system and the learned model. We then propose an active sampling scheme to compute a probabilistic upper bound on this distance in a sample-efficient manner. The proposed framework validates the learned model against only those behaviors of the system that are relevant for the purpose for which we intend to use this model, and does not require any a priori knowledge of the system dynamics. Several simulations illustrate the practicality of the proposed framework for validating the models of real-world systems, and consequently, for controller synthesis.

eess.SY↗

arXiv2017

Systematic Testing of Convolutional Neural Networks for Autonomous Driving

We present a framework to systematically analyze convolutional neural networks (CNNs) used in classification of cars in autonomous vehicles. Our analysis procedure comprises an image generator that produces synthetic pictures by sampling in a lower dimension image modification subspace and a suite of visualization tools. The image generator produces images which can be used to test the CNN and hence expose its vulnerabilities. The presented framework can be used to extract insights of the CNN classifier, compare across classification models, or generate training and validation datasets.

cs.CV↗

arXiv2017

Tunable Reactive Synthesis for Lipschitz-Bounded Systems with Temporal Logic Specifications

We address the problem of synthesizing reactive controllers for cyber-physical systems subject to Signal Temporal Logic (STL) specifications in the presence of adversarial inputs. Given a finite horizon, we define a reactive hierarchy of control problems that differ in the degree of information available to the system about the adversary's actions over the horizon. We show how to construct reactive controllers at various levels of the hierarchy, leveraging the existence of Lipschitz bounds on system dynamics and the quantitative semantics of STL. Our approach, a counterexample-guided inductive synthesis (CEGIS) scheme based on optimization and satisfiability modulo theories (SMT) solving, builds a strategy tree representing the interaction between the system and its environment. In every iteration of the CEGIS loop, we use a mix of optimization and SMT to maximally discard controllers falsified by a given counterexample. Our approach can be applied to any system with local Lipschitz-bounded dynamics, including linear, piecewise-linear and differentially-flat systems. Finally we show an application in the autonomous car domain.

eess.SY↗

arXiv2017

Stochastic Assume-Guarantee Contracts for Cyber-Physical System Design Under Probabilistic Requirements

We develop an assume-guarantee contract framework for the design of cyber-physical systems, modeled as closed-loop control systems, under probabilistic requirements. We use a variant of signal temporal logic, namely, Stochastic Signal Temporal Logic (StSTL) to specify system behaviors as well as contract assumptions and guarantees, thus enabling automatic reasoning about requirements of stochastic systems. Given a stochastic linear system representation and a set of requirements captured by bounded StSTL contracts, we propose algorithms that can check contract compatibility, consistency, and refinement, and generate a controller to guarantee that a contract is satisfied, following a stochastic model predictive control approach. Our algorithms leverage encodings of the verification and control synthesis tasks into mixed integer optimization problems, and conservative approximations of probabilistic constraints that produce both sound and tractable problem formulations. We illustrate the effectiveness of our approach on a few examples, including the design of embedded controllers for aircraft power distribution networks.

eess.SY↗

arXiv2017

Model Predictive Control for Signal Temporal Logic Specification

We present a mathematical programming-based method for model predictive control of cyber-physical systems subject to signal temporal logic (STL) specifications. We describe the use of STL to specify a wide range of properties of these systems, including safety, response and bounded liveness. For synthesis, we encode STL specifications as mixed integer-linear constraints on the system variables in the optimization problem at each step of a receding horizon control framework. We prove correctness of our algorithms, and present experimental results for controller synthesis for building energy and climate control.

eess.SY↗

arXiv2016

Diagnosis and Repair for Synthesis from Signal Temporal Logic Specifications

We address the problem of diagnosing and repairing specifications for hybrid systems formalized in signal temporal logic (STL). Our focus is on the setting of automatic synthesis of controllers in a model predictive control (MPC) framework. We build on recent approaches that reduce the controller synthesis problem to solving one or more mixed integer linear programs (MILPs), where infeasibility of a MILP usually indicates unrealizability of the controller synthesis problem. Given an infeasible STL synthesis problem, we present algorithms that provide feedback on the reasons for unrealizability, and suggestions for making it realizable. Our algorithms are sound and complete, i.e., they provide a correct diagnosis, and always terminate with a non-trivial specification that is feasible using the chosen synthesis method, when such a solution exists. We demonstrate the effectiveness of our approach on the synthesis of controllers for various cyber-physical systems, including an autonomous driving application and an aircraft electric power system.

eess.SY↗