Searcharxiv⌕ Search

arXiv subjects

Alejandro C. Frery

Publications and source records attributed to Alejandro C. Frery.

At least 37 records · Page 2Linked to original sources

MuSA: Multivariate Sampling Algorithm for Wireless Sensor Networks

A wireless sensor network can be used to collect and process environmental data, which is often of multivariate nature. This work proposes a multivariate sampling algorithm based on component analysis techniques in wireless sensor networks. To improve the sampling, the algorithm uses component analysis techniques to rank the data. Once ranked, the most representative data is retained. Simulation results show that our technique reduces the data keeping its representativeness. In addition, the energy consumption and delay to deliver the data on the network are reduced.

cs.DC↗

Bias Correction and Modified Profile Likelihood under the Wishart Complex Distribution

This paper proposes improved methods for the maximum likelihood (ML) estimation of the equivalent number of looks $L$. This parameter has a meaningful interpretation in the context of polarimetric synthetic aperture radar (PolSAR) images. Due to the presence of coherent illumination in their processing, PolSAR systems generate images which present a granular noise called speckle. As a potential solution for reducing such interference, the parameter $L$ controls the signal-noise ratio. Thus, the proposal of efficient estimation methodologies for $L$ has been sought. To that end, we consider firstly that a PolSAR image is well described by the scaled complex Wishart distribution. In recent years, Anfinsen et al. derived and analyzed estimation methods based on the ML and on trace statistical moments for obtaining the parameter $L$ of the unscaled version of such probability law. This paper generalizes that approach. We present the second-order bias expression proposed by Cox and Snell for the ML estimator of this parameter. Moreover, the formula of the profile likelihood modified by Barndorff-Nielsen in terms of $L$ is discussed. Such derivations yield two new ML estimators for the parameter $L$, which are compared to the estimators proposed by Anfinsen et al. The performance of these estimators is assessed by means of Monte Carlo experiments, adopting three statistical measures as comparison criterion: the mean square error, the bias, and the coefficient of variation. Equivalently to the simulation study, an application to actual PolSAR data concludes that the proposed estimators outperform all the others in homogeneous scenarios.

cs.CV↗

The Generalized Statistical Complexity of PolSAR Data

This paper presents and discusses the use of a new feature for PolSAR imagery: the Generalized Statistical Complexity. This measure is able to capture the disorder of the data by means of the entropy, as well as its departure from a reference distribution. The latter component is obtained by measuring a stochastic distance between two models: the $\mathcal G^0$ and the Gamma laws. Preliminary results on the intensity components of AIRSAR image of San Francisco are encouraging.

cs.IT↗

Contrast Measures based on the Complex Correlation Coefficient for PolSAR Imagery

We derive contrast measures which involve the number of looks and the complex correlation coefficient between polarization channels in PolSAR imagery. Using asymptotic results which characterize the behavior of these measures, we derive statistical regions of confidence which lead to test of hypothesis. An application to real data is performed, confirming the importance of the proposals.

math.ST↗

Distinguishing noise from chaos: objective versus subjective criteria using Horizontal Visibility Graph

A recently proposed methodology called the Horizontal Visibility Graph (HVG) [Luque {\it et al.}, Phys. Rev. E., 80, 046103 (2009)] that constitutes a geometrical simplification of the well known Visibility Graph algorithm [Lacasa {\it et al.\/}, Proc. Natl. Sci. U.S.A. 105, 4972 (2008)], has been used to study the distinction between deterministic and stochastic components in time series [L. Lacasa and R. Toral, Phys. Rev. E., 82, 036120 (2010)]. Specifically, the authors propose that the node degree distribution of these processes follows an exponential functional of the form $P(κ)\sim \exp(-λ~κ)$, in which $κ$ is the node degree and $λ$ is a positive parameter able to distinguish between deterministic (chaotic) and stochastic (uncorrelated and correlated) dynamics. In this work, we investigate the characteristics of the node degree distributions constructed by using HVG, for time series corresponding to $28$ chaotic maps and $3$ different stochastic processes. We thoroughly study the methodology proposed by Lacasa and Toral finding several cases for which their hypothesis is not valid. We propose a methodology that uses the HVG together with Information Theory quantifiers. An extensive and careful analysis of the node degree distributions obtained by applying HVG allow us to conclude that the Fisher-Shannon information plane is a remarkable tool able to graphically represent the different nature, deterministic or stochastic, of the systems under study.

stat.ML↗

A New Algorithm of Speckle Filtering using Stochastic Distances

This paper presents a new approach for filter design based on stochastic distances and tests between distributions. A window is defined around each pixel, overlapping samples are compared and only those which pass a goodness-of-fit test are used to compute the filtered value. The technique is applied to intensity SAR data with homogeneous regions using the Gamma model. The proposal is compared with the Lee's filter using a protocol based on Monte Carlo. Among the criteria used to quantify the quality of filters, we employ the equivalent number of looks, line and edge preservation. Moreover, we also assessed the filters by the Universal Image Quality Index and the Pearson's correlation on edges regions.

cs.IT↗

SAR Image Despeckling Algorithms using Stochastic Distances and Nonlocal Means

This paper presents two approaches for filter design based on stochastic distances for intensity speckle reduction. A window is defined around each pixel, overlapping samples are compared and only those which pass a goodness-of-fit test are used to compute the filtered value. The tests stem from stochastic divergences within the Information Theory framework. The technique is applied to intensity Synthetic Aperture Radar (SAR) data with homogeneous regions using the Gamma model. The first approach uses a Nagao-Matsuyama-type procedure for setting the overlapping samples, and the second uses the nonlocal method. The proposals are compared with the Improved Sigma filter and with anisotropic diffusion for speckled data (SRAD) using a protocol based on Monte Carlo simulation. Among the criteria used to quantify the quality of filters, we employ the equivalent number of looks, and line and edge preservation. Moreover, we also assessed the filters by the Universal Image Quality Index and by the Pearson correlation between edges. Applications to real images are also discussed. The proposed methods show good results.

cs.IT↗

Structural Changes in Data Communication in Wireless Sensor Networks

Wireless sensor networks are an important technology for making distributed autonomous measures in hostile or inaccessible environments. Among the challenges they pose, the way data travel among them is a relevant issue since their structure is quite dynamic. The operational topology of such devices can often be described by complex networks. In this work, we assess the variation of measures commonly employed in the complex networks literature applied to wireless sensor networks. Four data communication strategies were considered: geometric, random, small-world, and scale-free models, along with the shortest path length measure. The sensitivity of this measure was analyzed with respect to the following perturbations: insertion and removal of nodes in the geometric strategy; and insertion, removal and rewiring of links in the other models. The assessment was performed using the normalized Kullback-Leibler divergence and Hellinger distance quantifiers, both deriving from the Information Theory framework. The results reveal that the shortest path length is sensitive to perturbations.

physics.data-an↗

Comparing Edge Detection Methods based on Stochastic Entropies and Distances for PolSAR Imagery

Polarimetric synthetic aperture radar (PolSAR) has achieved a prominent position as a remote imaging method. However, PolSAR images are contaminated by speckle noise due to the coherent illumination employed during the data acquisition. This noise provides a granular aspect to the image, making its processing and analysis (such as in edge detection) hard tasks. This paper discusses seven methods for edge detection in multilook PolSAR images. In all methods, the basic idea consists in detecting transition points in the finest possible strip of data which spans two regions. The edge is contoured using the transitions points and a B-spline curve. Four stochastic distances, two differences of entropies, and the maximum likelihood criterion were used under the scaled complex Wishart distribution; the first six stem from the h-phi class of measures. The performance of the discussed detection methods was quantified and analyzed by the computational time and probability of correct edge detection, with respect to the number of looks, the backscatter matrix as a whole, the SPAN, the covariance an the spatial resolution. The detection procedures were applied to three real PolSAR images. Results provide evidence that the methods based on the Bhattacharyya distance and the difference of Shannon entropies outperform the other techniques.

math.ST↗

Speckle Reduction with Adaptive Stack Filters

Stack filters are a special case of non-linear filters. They have a good performance for filtering images with different types of noise while preserving edges and details. A stack filter decomposes an input image into stacks of binary images according to a set of thresholds. Each binary image is then filtered by a Boolean function, which characterizes the filter. Adaptive stack filters can be computed by training using a prototype (ideal) image and its corrupted version, leading to optimized filters with respect to a loss function. In this work we propose the use of training with selected samples for the estimation of the optimal Boolean function. We study the performance of adaptive stack filters when they are applied to speckled imagery, in particular to Synthetic Aperture Radar (SAR) images. This is done by evaluating the quality of the filtered images through the use of suitable image quality indexes and by measuring the classification accuracy of the resulting images. We used SAR images as input, since they are affected by speckle noise that makes classification a difficult task.

cs.CV↗

Analytic Expressions for Stochastic Distances Between Relaxed Complex Wishart Distributions

The scaled complex Wishart distribution is a widely used model for multilook full polarimetric SAR data whose adequacy has been attested in the literature. Classification, segmentation, and image analysis techniques which depend on this model have been devised, and many of them employ some type of dissimilarity measure. In this paper we derive analytic expressions for four stochastic distances between relaxed scaled complex Wishart distributions in their most general form and in important particular cases. Using these distances, inequalities are obtained which lead to new ways of deriving the Bartlett and revised Wishart distances. The expressiveness of the four analytic distances is assessed with respect to the variation of parameters. Such distances are then used for deriving new tests statistics, which are proved to have asymptotic chi-square distribution. Adopting the test size as a comparison criterion, a sensitivity study is performed by means of Monte Carlo experiments suggesting that the Bhattacharyya statistic outperforms all the others. The power of the tests is also assessed. Applications to actual data illustrate the discrimination and homogeneity identification capabilities of these distances.

stat.ML↗

Speckle Reduction in Polarimetric SAR Imagery with Stochastic Distances and Nonlocal Means

This paper presents a technique for reducing speckle in Polarimetric Synthetic Aperture Radar (PolSAR) imagery using Nonlocal Means and a statistical test based on stochastic divergences. The main objective is to select homogeneous pixels in the filtering area through statistical tests between distributions. This proposal uses the complex Wishart model to describe PolSAR data, but the technique can be extended to other models. The weights of the location-variant linear filter are function of the p-values of tests which verify the hypothesis that two samples come from the same distribution and, therefore, can be used to compute a local mean. The test stems from the family of (h-phi) divergences which originated in Information Theory. This novel technique was compared with the Boxcar, Refined Lee and IDAN filters. Image quality assessment methods on simulated and real data are employed to validate the performance of this approach. We show that the proposed filter also enhances the polarimetric entropy and preserves the scattering information of the targets.

cs.IT↗

Classification of Segments in PolSAR Imagery by Minimum Stochastic Distances Between Wishart Distributions

A new classifier for Polarimetric SAR (PolSAR) images is proposed and assessed in this paper. Its input consists of segments, and each one is assigned the class which minimizes a stochastic distance. Assuming the complex Wishart model, several stochastic distances are obtained from the h-phi family of divergences, and they are employed to derive hypothesis test statistics that are also used in the classification process. This article also presents, as a novelty, analytic expressions for the test statistics based on the following stochastic distances between complex Wishart models: Kullback-Leibler, Bhattacharyya, Hellinger, Rényi, and Chi-Square; also, the test statistic based on the Bhattacharyya distance between multivariate Gaussian distributions is presented. The classifier performance is evaluated using simulated and real PolSAR data. The simulated data are based on the complex Wishart model, aiming at the analysis of the proposal well controlled data. The real data refer to the complex L-band image, acquired during the 1994 SIR-C mission. The results of the proposed classifier are compared with those obtained by a Wishart per-pixel/contextual classifier, and we show the better performance of the region-based classification. The influence of the statistical modeling is assessed by comparing the results using the Bhattacharyya distance between multivariate Gaussian distributions for amplitude data. The results with simulated data indicate that the proposed classification method has a very good performance when the data follow the Wishart model. The proposed classifier also performs better than the per-pixel/contextual classifier and the Bhattacharyya Gaussian distance using SIR-C PolSAR data.

cs.CV↗

Entropy-based Statistical Analysis of PolSAR Data

Images obtained from coherent illumination processes are contaminated with speckle noise, with polarimetric synthetic aperture radar (PolSAR) imagery as a prominent example. With an adequacy widely attested in the literature, the scaled complex Wishart distribution is an acceptable model for PolSAR data. In this perspective, we derive analytic expressions for the Shannon, Rényi, and restricted Tsallis entropies under this model. Relationships between the derived measures and the parameters of the scaled Wishart law (i.e., the equivalent number of looks and the covariance matrix) are discussed. In addition, we obtain the asymptotic variances of the Shannon and Rényi entropies when replacing distribution parameters by maximum likelihood estimators. As a consequence, confidence intervals based on these two entropies are also derived and proposed as new ways of capturing contrast. New hypothesis tests are additionally proposed using these results, and their performance is assessed using simulated and real data. In general terms, the test based on the Shannon entropy outperforms those based on Rényi's.

stat.ME↗

On the Use of Lee's Protocol for Speckle-Reducing Techniques

This paper presents two new MAP (Maximum a Posteriori) filters for speckle noise reduction and a Monte Carlo procedure for the assessment of their performance. In order to quantitatively evaluate the results obtained using these new filters, with respect to classical ones, a Monte Carlo extension of Lee's protocol is proposed. This extension of the protocol shows that its original version leads to inconsistencies that hamper its use as a general procedure for filter assessment. Some solutions for these inconsistencies are proposed, and a consistent comparison of speckle-reducing filters is provided.

cs.CV↗

Assessment of SAR Image Filtering using Adaptive Stack Filters

Stack filters are a special case of non-linear filters. They have a good performance for filtering images with different types of noise while preserving edges and details. A stack filter decomposes an input image into several binary images according to a set of thresholds. Each binary image is then filtered by a Boolean function, which characterizes the filter. Adaptive stack filters can be designed to be optimal; they are computed from a pair of images consisting of an ideal noiseless image and its noisy version. In this work we study the performance of adaptive stack filters when they are applied to Synthetic Aperture Radar (SAR) images. This is done by evaluating the quality of the filtered images through the use of suitable image quality indexes and by measuring the classification accuracy of the resulting images.

cs.CV↗

Polarimetric SAR Image Segmentation with B-Splines and a New Statistical Model

We present an approach for polarimetric Synthetic Aperture Radar (SAR) image region boundary detection based on the use of B-Spline active contours and a new model for polarimetric SAR data: the GHP distribution. In order to detect the boundary of a region, initial B-Spline curves are specified, either automatically or manually, and the proposed algorithm uses a deformable contours technique to find the boundary. In doing this, the parameters of the polarimetric GHP model for the data are estimated, in order to find the transition points between the region being segmented and the surrounding area. This is a local algorithm since it works only on the region to be segmented. Results of its performance are presented.

cs.CV↗

Deconvolution of vibroacoustic images using a simulation model based on a three dimensional point spread function

Vibro-acoustography (VA) is a medical imaging method based on the difference-frequency generation produced by the mixture of two focused ultrasound beams. VA has been applied to different problems in medical imaging such as imaging bones, microcalcifications in the breast, mass lesions, and calcified arteries. The obtained images may have a resolution of 0.7--0.8 mm. Current VA systems based on confocal or linear array transducers generate C-scan images at the beam focal plane. Images on the axial plane are also possible, however the system resolution along depth worsens when compared to the lateral one. Typical axial resolution is about 1.0 cm. Furthermore, the elevation resolution of linear array systems is larger than that in lateral direction. This asymmetry degrades C-scan images obtained using linear arrays. The purpose of this article is to study VA image restoration based on a 3D point spread function (PSF) using classical deconvolution algorithms: Wiener, constrained least-squares (CLSs), and geometric mean filters. To assess the filters' performance, we use an image quality index that accounts for correlation loss, luminance and contrast distortion. Results for simulated VA images show that the quality index achieved with the Wiener filter is 0.9 (1 indicates perfect restoration). This filter yielded the best result in comparison with the other ones. Moreover, the deconvolution algorithms were applied to an experimental VA image of a phantom composed of three stretched 0.5 mm wires. Experiments were performed using transducer driven at two frequencies, 3075 kHz and 3125 kHz, which resulted in the difference-frequency of 50 kHz. Restorations with the theoretical line spread function (LSF) did not recover sufficient information to identify the wires in the images. However, using an estimated LSF the obtained results displayed enough information to spot the wires in the images.

cs.CV↗