arXiv subjects

Aleks Reinhardt

Publications and source records attributed to Aleks Reinhardt.

At least 19 recordsLinked to original sources

arXiv2023

A streamlined molecular-dynamics workflow for computing solubilities of molecular and ionic crystals

Computing the solubility of crystals in a solvent using atomistic simulations is notoriously challenging due to the complexities and convergence issues associated with free-energy methods, as well as the slow equilibration in direct-coexistence simulations. This paper introduces a molecular-dynamics workflow that simplifies and robustly computes the solubility of molecular or ionic crystals. This method is considerably more straightforward than the state-of-the-art, as we have streamlined and optimised each step of the process. Specifically, we calculate the chemical potential of the crystal using the gas-phase molecule as a reference state, and employ the S0 method to determine the concentration dependence of the chemical potential of the solute. We use this workflow to predict the solubilities of sodium chloride in water, urea polymorphs in water, and paracetamol polymorphs in both water and ethanol. Our findings indicate that the predicted solubility is sensitive to the chosen potential energy surface. Furthermore, we note that the harmonic approximation often fails for both molecular crystals and gas molecules at or above room temperature, and that the assumption of an ideal solution becomes less valid for highly soluble substances.

cond-mat.stat-mech↗

arXiv2023

Simulations of DNA-origami self-assembly reveal design-dependent nucleation barriers

Nucleation is the rate-determining step in the kinetics of many self-assembly processes. However, the importance of nucleation in the kinetics of DNA-origami self-assembly, which involves both the binding of staple strands and the folding of the scaffold strand, is unclear. Here, using Monte Carlo simulations of a lattice model of DNA origami, we find that some, but not all, designs can have a nucleation barrier and that this barrier disappears at lower temperatures, rationalizing the success of isothermal assembly. We show that the height of the nucleation barrier depends primarily on the coaxial stacking of staples that are adjacent on the same helix, a parameter that can be modified with staple design. Creating a nucleation barrier to DNA-origami assembly could be useful in optimizing assembly times and yields, while eliminating the barrier may allow for fast molecular sensors that can assemble/disassemble without hysteresis in response to changes in the environment.

cond-mat.soft↗

arXiv2022

Same and interconvertible high-pressure ice phases

Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our atomistic simulations show that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII'' has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, ice X transforms into the Pbcm phase with a sharp structural change but no apparent activation barrier, whilst at higher pressures the barrier gradually increases. Our study thus clarifies the phase behaviour of the high-pressure insulating ices and reveals peculiar solid-solid transition mechanisms not known in other systems.

cond-mat.mtrl-sci↗

arXiv2020

Quantum-mechanical exploration of the phase diagram of water

The phase diagram of water harbours many mysteries: some of the phase boundaries are fuzzy, and the set of known stable phases may not be complete. Starting from liquid water and a comprehensive set of 50 ice structures, we compute the phase diagram at three hybrid density-functional-theory levels of approximation, accounting for thermal and nuclear fluctuations as well as proton disorder. Such calculations are only made tractable because we combine machine-learning methods and advanced free-energy techniques. The computed phase diagram is in qualitative agreement with experiment, particularly at pressures $\lesssim$8000 bar, and the discrepancy in chemical potential is comparable with the subtle uncertainties introduced by proton disorder and the spread between the three hybrid functionals. None of the hypothetical ice phases considered is thermodynamically stable in our calculations, suggesting the completeness of the experimental water phase diagram in the region considered. Our work demonstrates the feasibility of predicting the phase diagram of a polymorphic system from first principles and provides a thermodynamic way of testing the limits of quantum-mechanical calculations.

cond-mat.stat-mech↗

arXiv2020

Numerical calculation of free-energy barriers for entangled polymer nucleation

The crystallisation of entangled polymers from their melt is investigated using computer simulation with a coarse-grained model. Using hybrid Monte Carlo simulations enables us to probe the behaviour of long polymer chains. We identify solid-like beads with a centrosymmetry local order parameter and compute the nucleation free-energy barrier at relatively high supercooling with adaptive-bias windowed umbrella sampling. Our results demonstrate that the critical nucleus sizes and the heights of free-energy barriers do not significantly depend on the molecular weight of the polymer; however, the nucleation rate decreases with increasing molecular weight. Moreover, an analysis of the composition of the critical nucleus suggests that intramolecular growth of the nucleated cluster does not contribute significantly to crystallisation for this system.

cond-mat.soft↗

arXiv2020

Predicting the phase diagram of titanium dioxide with random search and pattern recognition

Predicting phase stabilities of crystal polymorphs is central to computational materials science and chemistry. Such predictions are challenging because they first require searching for potential energy minima and then performing arduous free-energy calculations to account for entropic effects at finite temperatures. Here, we develop a framework that facilitates such predictions by exploiting all the information obtained from random searches of crystal structures. This framework combines automated clustering, classification and visualisation of crystal structures with machine-learning estimation of their enthalpy and entropy. We demonstrate the framework on the technologically important system of TiO2, which has many polymorphs, without relying on prior knowledge of known phases. We find a number of new phases and predict the phase diagram and metastabilities of crystal polymorphs at 1600 K, benchmarking the results against full free-energy calculations.

cond-mat.mtrl-sci↗

arXiv2019

Phase behaviour of empirical potentials of titanium dioxide

In recent years, several relatively similar empirical models of titanium dioxide have been proposed as reparameterisations of the potential of Matsui and Akaogi, with the Buckingham interaction replaced by a Lennard-Jones interaction. However, because of the steepness of the repulsive region of the Lennard-Jones potential, such reparameterised models result in rather different mechanical and thermodynamic properties compared to the original potential. Here, we use free-energy calculations based on the Einstein crystal method to compute the phase diagram of both the Matsui-Akaogi potential and one of its Lennard-Jones-based reparameterisations. Both potentials are able to support a large number of distinct crystalline polymorphs of titanium dioxide that have been observed in experiment, but the regions of thermodynamic stability of the individual phases are significantly different from one another. Moreover, neither potential results in phase behaviour that is fully consistent with the available experimental evidence.

cond-mat.stat-mech↗

arXiv2019

Microscopic analysis of thermo-orientation in systems of off-centre Lennard-Jones particles

When fluids of anisotropic molecules are placed in temperature gradients, the molecules may align themselves along the gradient: this is called thermo-orientation. We discuss the theory of this effect in a fluid of particles that interact by a spherically symmetric potential, where the particles' centres of mass do not coincide with their interaction centres. Starting from the equations of motion of the molecules, we show how a simple assumption of local equipartition of energy can be used to predict the thermo-orientation effect, recovering the result of Wirnsberger et al. [Phys. Rev. Lett. 120, 226001 (2018)]. Within this approach, we show that for particles with a single interaction centre, the thermal centre of the molecule must coincide with the interaction centre. The theory also explains the coupling between orientation and kinetic energy that is associated with this non-Boltzmann distribution. We discuss deviations from this local equipartition assumption, showing that these can occur in linear response to a temperature gradient. We also present numerical simulations showing significant deviations from the local equipartition predictions, which increase as the centre of mass of the molecule is displaced further from its interaction centre.

cond-mat.stat-mech↗

arXiv2018

Lattice models and Monte Carlo methods for simulating DNA origami self-assembly

The optimal design of DNA origami systems that assemble rapidly and robustly is hampered by the lack of a model for self-assembly that is sufficiently detailed yet computationally tractable. Here, we propose a model for DNA origami that strikes a balance between these two criteria by representing these systems on a lattice at the level of binding domains. The free energy of hybridization between individual binding domains is estimated with a nearest-neighbour model. Double helical segments are treated as rigid rods, but we allow flexibility at points where the backbone of one of the strands is interrupted, which provides a reasonably realistic representation of partially and fully assembled states. Particular attention is paid to the constraints imposed by the double helical twist, as they determine where strand crossovers between adjacent helices can occur. To improve the efficiency of sampling configuration space, we develop Monte Carlo methods for sampling scaffold conformations in near-assembled states, and we carry out simulations in the grand canonical ensemble, enabling us to avoid considering states with unbound staples. We demonstrate that our model can quickly sample assembled configurations of a small origami design previously studied with the oxDNA model, as well as a design with staples that span longer segments of the scaffold. The sampling ability of our method should allow for good statistics to be obtained when studying the assembly pathways, and is suited to investigating in particular the effects of design and assembly conditions on these pathways and their resulting final assembled structures.

cond-mat.soft↗

arXiv2018

Direct observation and rational design of nucleation behavior in addressable self-assembly

In order to optimize a self-assembly reaction, it is essential to understand the factors that govern its pathway. Here, we examine the influence of nucleation pathways in a model system for addressable, multicomponent self-assembly based on a prototypical 'DNA-brick' structure. By combining temperature-dependent dynamic light scattering and atomic force microscopy with coarse-grained simulations, we show how subtle changes in the nucleation pathway profoundly affect the yield of the correctly formed structures. In particular, we can increase the range of conditions over which self-assembly occurs by utilizing stable multi-subunit clusters that lower the nucleation barrier for assembling subunits in the interior of the structure. Consequently, modifying only a small portion of a structure is sufficient to optimize its assembly. Due to the generality of our coarse-grained model and the excellent agreement that we find with our experimental results, the design principles reported here are likely to apply generically to addressable, multicomponent self-assembly.

cond-mat.soft↗

arXiv2018

Theoretical prediction of thermal polarisation

We present a mean-field theory to explain the thermo-orientation effect in an off-centre Stockmayer fluid. This effect is the underlying cause of thermally induced polarisation and thermally induced monopoles, which have recently been predicted theoretically. Unlike previous theories that are based either on phenomenological equations or on scaling arguments, our approach does not require any fitting parameters. Given an equation of state and assuming local equilibrium, we construct an effective Hamiltonian for the computation of local Boltzmann averages. This simple theoretical treatment predicts molecular orientations that are in very good agreement with simulation results for the range of dipole strengths investigated. By decomposing the overall alignment into contributions from the temperature and density gradients, we shed further light on how the non-equilibrium result arises from the competition between the two gradients.

cond-mat.stat-mech↗

arXiv2017

Investigating the role of boundary bricks in DNA brick self-assembly

In the standard DNA brick set-up, distinct 32-nucleotide strands of single-stranded DNA are each designed to bind specifically to four other such molecules. Experimentally, it has been demonstrated that the overall yield is increased if certain bricks which occur on the outer faces of target structures are merged with adjacent bricks. However, it is not well understood by what mechanism such `boundary bricks' increase the yield, as they likely influence both the nucleation process and the final stability of the target structure. Here, we use Monte Carlo simulations with a patchy particle model of DNA bricks to investigate the role of boundary bricks in the self-assembly of complex multicomponent target structures. We demonstrate that boundary bricks lower the free-energy barrier to nucleation and that boundary bricks on edges stabilize the final structure. However, boundary bricks are also more prone to aggregation, as they can stabilize partially assembled intermediates. We explore some design strategies that permit us to benefit from the stabilizing role of boundary bricks whilst minimizing their ability to hinder assembly; in particular, we show that maximizing the total number of boundary bricks is not an optimal strategy.

cond-mat.soft↗

arXiv2016

Self-assembly of two-dimensional binary quasicrystals: A possible route to a DNA quasicrystal

We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motifs, which can be chosen to bond with one another very specifically by tuning the DNA sequences of the protruding arms. We explore several possible design strategies and conclude that DNA star tiles that are designed to interact with one another in a specific but not overly constrained way could potentially be used to construct soft quasicrystals in experiment. We verify that such star tiles can form stable dodecagonal motifs using oxDNA, a realistic coarse-grained model of DNA.

cond-mat.soft↗

arXiv2016

DNA brick self-assembly with an off-lattice potential

We report Monte Carlo simulations of a simple off-lattice patchy-particle model for DNA `bricks'. We relate the parameters that characterise this model with the binding free energy of pairs of single-stranded DNA molecules. We verify that an off-lattice potential parameterised in this way reproduces much of the behaviour seen with a simpler lattice model we introduced previously, although the relaxation of the geometric constraints leads to a more error-prone self-assembly pathway. We investigate the self-assembly process as a function of the strength of the non-specific interactions. We show that our off-lattice model for DNA bricks results in robust self-assembly into a variety of target structures.

cond-mat.soft↗

arXiv2015

Effects of co-ordination number on the nucleation behaviour in many-component self-assembly

We report canonical and grand-canonical lattice Monte Carlo simulations of the self-assembly of addressable structures comprising hundreds of distinct component types. The nucleation behaviour, in the form of free-energy barriers to nucleation, changes significantly as the co-ordination number of the building blocks is changed from 4 to 8 to 12. Unlike tetrahedral structures - which roughly correspond to DNA bricks that have been studied in experiment - the shapes of the free-energy barriers of higher co-ordination structures depend strongly on the supersaturation, and such structures require a very significant driving force for structure growth before nucleation becomes thermally accessible. Although growth at high supersaturation results in more defects during self-assembly, we show that high co-ordination number structures can still be assembled successfully in computer simulations and that they exhibit self-assembly behaviour analogous to DNA bricks. In particular, the self-assembly remains modular, enabling in principle a wide variety of nanostructures to be assembled, with a greater spatial resolution than is possible in low co-ordination structures.

cond-mat.soft↗

arXiv2015

Rational design of self-assembly pathways for complex multicomponent structures

The field of complex self-assembly is moving toward the design of multi-particle structures consisting of thousands of distinct building blocks. To exploit the potential benefits of structures with such `addressable complexity,' we need to understand the factors that optimize the yield and the kinetics of self-assembly. Here we use a simple theoretical method to explain the key features responsible for the unexpected success of DNA-brick experiments, which are currently the only demonstration of reliable self-assembly with such a large number of components. Simulations confirm that our theory accurately predicts the narrow temperature window in which error-free assembly can occur. Even more strikingly, our theory predicts that correct assembly of the complete structure may require a time-dependent experimental protocol. Furthermore, we predict that low coordination numbers result in non-classical nucleation behavior, which we find to be essential for achieving optimal nucleation kinetics under mild growth conditions. We also show that, rather surprisingly, the use of heterogeneous bond energies improves the nucleation kinetics and in fact appears to be necessary for assembling certain intricate three-dimensional structures. This observation makes it possible to sculpt nucleation pathways by tuning the distribution of interaction strengths. These insights not only suggest how to improve the design of structures based on DNA bricks, but also point the way toward the creation of a much wider class of chemical or colloidal structures with addressable complexity.

cond-mat.soft↗

arXiv2015

Theoretical prediction of free-energy landscapes for complex self-assembly

We present a technique for calculating free-energy profiles for the nucleation of multicomponent structures that contain as many species as building blocks. We find that a key factor is the topology of the graph describing the connectivity of the target assembly. By considering the designed interactions separately from weaker, incidental interactions, our approach yields predictions for the equilibrium yield and nucleation barriers. These predictions are in good agreement with corresponding Monte Carlo simulations. We show that a few fundamental properties of the connectivity graph determine the most prominent features of the assembly thermodynamics. Surprisingly, we find that polydispersity in the strengths of the designed interactions stabilizes intermediate structures and can be used to sculpt the free-energy landscape for self-assembly. Finally, we demonstrate that weak incidental interactions can preclude assembly at equilibrium due to the combinatorial possibilities for incorrect association.

cond-mat.soft↗

arXiv2014

Numerical evidence for nucleated self-assembly of DNA brick structures

The observation by Ke et al. [Science 338, 1177 (2012)] that large numbers of short, pre-designed DNA strands can assemble into three-dimensional target structures came as a great surprise, as no colloidal self-assembling system has ever achieved the same degree of complexity. That failure seemed easy to rationalise: the larger the number of distinct building blocks, the higher the expected error rate for self-assembly. The experiments of Ke et al. have disproved this argument. Here, we report Monte Carlo simulations of the self-assembly of a DNA brick cube, comprising approximately 1000 types of DNA strand, using a simple model. We model the DNA strands as lattice tetrahedra with attractive patches, the interaction strengths of which are computed using a standard thermodynamic model. We find that, within a narrow temperature window, the target structure assembles with high probability. Our simulations suggest that mis-assembly is disfavoured because of a slow nucleation step. As our model incorporates no aspect of DNA other than its binding properties, these simulations suggest that, with proper design of the building blocks, other systems, such as colloids, may also assemble into truly complex structures.

cond-mat.soft↗