arXiv subjects

Aleksandra Lelevic

Publications and source records attributed to Aleksandra Lelevic.

4 recordsLinked to original sources

arXiv2023

Score function for the optimization of the performance of forward fill/flush differential flow modulation for comprehensive two-dimensional gas chromatography

Modulation is the key element of the comprehensive two-dimensional gas chromatography separation. Forward fill/flush flow modulation is cost effective, robust and suitable for analysis of a wide range of samples. Even though this modulation system is well known, studies regarding its optimization are sparse. In this work, based on hundreds of experiments involving multiple column sets and modulation conditions, an approach was proposed that permits to facilitate the choice of the forward fill/flush flow modulation parameters. A score function was developed that allows to predict the forward fill/flush flow modulation process efficiency as judged by the modulated peak shape. The score function was based on the physical rules for optimized and quantitative forward fill/flush flow modulation proposed in our previous work which state that the sum of the fill and flush modulation distance should be close to the modulation channel length and that the ratio of the flush and fill distance should be sufficiently high for efficient channel flushing. The score function was embedded in a freely available tool in the form of a forward fill/flush flow modulation calculator which allows the user to quickly check the relevancy of the modulation operating conditions or to obtain a suggestion for optimal modulation parameters.

physics.chem-ph↗

arXiv2023

Facilitating method development for reverse fill/flush flow modulation by using a tunable auxiliary pressure source instead of a fixed bleed capillary

The conventional reverse fill/flush flow modulation for comprehensive two-dimensional gas chromatography requires a bleed capillary column to be connected to the outlet of the modulator channel. The purpose of this capillary, that does not contain the stationary phase, is to provide a pressure resistance to the modulator channel flow. In this way, the desired modulator flow can be achieved, and channel over-filling can be avoided. Normally, the length and the internal diameter of the bleed capillary are chosen so as to obtain the modulator flow that is close to the flow of the first separation column. Thus, for any chosen set of chromatographic conditions, the required dimensions of the bleed capillary can be completely different, making the GCxGC method development tedious and generating additional costs in consumables and analyst time. In this work a tunable pressure source generating a suitable backpressure was used instead of the fixed bleed capillary which has the advantage of the possibility to freely adapt the pressure resistance and generate the required modulator channel flow for any conditions. This set-up has been evaluated and compared in terms of the impact on the modulation performance to the set-up involving a fixed bleed capillary demonstrating comparable performance.

physics.chem-ph↗

arXiv2019

Electrodeposition of Ni-P composite coatings: A review

Ni-P coatings produced by electrodeposition have important mechanical, tribological and electrochemical properties. They can also exhibit catalytic activity and beneficial magnetic behaviour. With subsequent thermal treatment, the hardness of such Ni-P coatings can approach or exceed that of hard Cr coatings. Electrochemical codeposition of homogeneously dispersed second phase particles within the Ni-P matrix can enhance deposit properties and meet the challenging demands on modern engineering coatings. A general overview of research work on the electrodeposition of Ni-P composite coatings containing included ceramic or solid lubricant particles is provided. Advances in research into NieP composite layers reinforced by SiC, B4C, WC, Al2O3, SiO2, TiO2, CeO2, MWCNT, MoS2, WS2, TiN, hexagonal BN, PTFE and their combinations are considered. Major models proposed for the codeposition of particles, the influence of bath hydrodynamics and control of operational parameters are illustrated by examples. Important trends are highlighted and opportunities for future R & D are summarised.

physics.app-ph↗

arXiv2018

Ni-P coatings electroplating - A review, Part I: Pure Ni-P alloy

In the electroplating industry Ni-P coatings are extensively employed owing to their excellent properties which enable substrate protection against corrosion and wear. Depending on their composition and structure, as-plated deposits demonstrate good mechanical, tribological and electrochemical features, catalytic activity but also beneficial magnetic characteristics. With subsequent thermal treatment hardness of Ni-P metal-metalloid system can approach or be even higher than that of hard Cr coatings. The purpose of this paper is to provide a general survey of the research work dealing with the electrodeposition of Ni-P binary alloy coatings. Proposed phosphorus incorporation mechanisms, Ni-P alloy microstructure before and after thermal treatment, its mechanical, tribological, corrosion, catalytic and magnetic properties are considered, so are the key process variables influencing phosphorus content in the deposits and the roles of the main electrolytic bath constituents. Findings on the merits of employing pulse plating and fabrication of unconventional (layered and functionally graded) structures are succinctly explored.

physics.app-ph↗