arXiv subjects

Aleksey V. Arsenin

Publications and source records attributed to Aleksey V. Arsenin.

13 recordsLinked to original sources

arXiv2025

The influence of shot noise on the performance of phase singularity-based refractometric sensors

Topological singularities of optical response functions -- such as reflection amplitudes -- enable elegant practical applications ranging from analog signal processing to novel molecular sensing approaches. A phase singularity-based refractometric sensor monitors the rapidly evolving argument of the optical field near the point of phase singularity, in contrast to the reflection zero in traditional surface plasmon polariton sensors. This raises a natural question: What happens with the sensitivity and resolution of such a sensor when it operates close to a zero of the response function, where the detected signal may be greatly influenced by various noise sources? In this paper, we systematically study the effect of the shot noise on the performance of a generic phase singularity-based refractometric sensor. We develop a theoretical model of a spectroscopic ellipsometry-based system operating near a phase singularity and couple the macroscopic optical picture of the detection with a quantum shot noise model. Within the developed model, we illustrate how the shot noise of the detector comes into play and study its effect on the sensitivity and resolution of the refractometric sensor. Our results suggest that such an ellipsometry-based phase singularity sensor remains stable even in the presence of shot noise near the point of zero reflection.

physics.optics↗

arXiv2024

Substrate-aware computational design of two-dimensional materials

Two-dimensional materials have attracted considerable attention due to their remarkable electronic, mechanical and optical properties, making them prime candidates for next-generation electronic and optoelectronic applications. Despite their widespread use in combination with substrates in practical applications, including the fabrication process and final device assembly, computational studies often neglect the effects of substrate interactions for simplicity. This study presents a novel method for predicting the atomic structure of 2D materials on arbitrary substrates by combining an evolutionary algorithm, a lattice-matching technique, an automated machine learning interatomic potentials training protocol, and the ab initio thermodynamics approach for predicting the possible conditions of experimental synthesis of the predicted 2D structures. Using the Mo-S system on a c-cut sapphire substrate as a case study, we reveal several new stable and metastable structures, including previously known 1H-MoS2 and newly found Pmma Mo3S2, P-1 Mo2S, P21m Mo5S3, and P4mm Mo4S, where the Mo4S structure is specifically stabilized by interaction with the substrate. Electronic band structure calculations of Mo3S2, Mo2S, Mo5S3, and Mo4S showed their metallic behavior, while phonon properties calculations indicated their dynamic stability and substrate-induced modulation of the phonon density of states. Finally, we use the ab initio thermodynamics approach to predict the synthesis conditions of the discovered structures in the parameter space of the commonly used CVD technique. These results provide insights into computational substrate engineering, allowing one to study the substrate effect on the thermodynamic and dynamical stability of 2D materials and to modulate their electronic and phonon properties for their future applications, as well as to provide guide maps for their experimental synthesis.

cond-mat.mtrl-sci↗

arXiv2023

Chiral photonic super-crystals based on helical van der Waals homostructures

Chirality is probably the most mysterious among all symmetry transformations. Very readily broken in biological systems, it is practically absent in naturally occurring inorganic materials and is very challenging to create artificially. Chiral optical wavefronts are often used for the identification, control and discrimination of left- and right-handed biological and other molecules. Thus, it is crucially important to create materials capable of chiral interaction with light, which would allow one to assign arbitrary chiral properties to a light field. In this paper, we utilized van der Waals technology to assemble helical homostructures with chiral properties (e. g. circular dichroism). Because of the large range of van der Waals materials available such helical homostructures can be assigned with very flexible optical properties. We demonstrate our approach by creating helical homostructures based on multilayer As$_2$S$_3$, which offers the most pronounced chiral properties even in thin structures due to its strong biaxial optically anisotropy. Our work showcases that the chirality of an electromagnetic system may emerge at an intermediate level between the molecular and the mesoscopic one due to the tailored arrangement of non-chiral layers of van der Waals crystals and without additional patterning.

physics.optics↗

arXiv2023

Exploring van der Waals materials with high anisotropy: geometrical and optical approaches

The emergence of van der Waals (vdW) materials resulted in the discovery of their giant optical, mechanical, and electronic anisotropic properties, immediately enabling countless novel phenomena and applications. Such success inspired an intensive search for the highest possible anisotropic properties among vdW materials. Furthermore, the identification of the most promising among the huge family of vdW materials is a challenging quest requiring innovative approaches. Here, we suggest an easy-to-use method for such a survey based on the crystallographic geometrical perspective of vdW materials followed by their optical characterization. Using our approach, we found As2S3 as a highly anisotropic vdW material. It demonstrates rare giant in-plane optical anisotropy, high refractive index and transparency in the visible range, overcoming the century-long record set by rutile. Given these benefits, As2S3 opens a pathway towards next-generation nanophotonics as demonstrated by an ultrathin true zero-order quarter-waveplate that combines classical and the Fabry-Perot optical phase accumulations. Hence, our approach provides an effective and easy-to-use method to find vdW materials with the utmost anisotropic properties.

physics.optics↗

arXiv2023

A hidden advantage of van der Waals materials for overcoming limitations in photonic integrated circuitry

With the advance of on-chip nanophotonics, there is a high demand for high refractive index, low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with high refractive index can offer a very advanced alternative. Still, up to now it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development of vdW nanophotonics. Here, we studied WS2-based waveguides in terms of their optical properties and, particularly, in terms of possible crosstalk distance. Surprisingly, we discovered that the low refractive index in the direction perpendicular to the atomic layers improves the characteristics of such devices, mainly due to expanding the range of parameters at which single-mode propagation can be achieved. Thus, using anisotropic materials offers new opportunities and novel control knobs when designing the nanophotonic devices.

physics.optics↗

arXiv2022

Ultrafast opto-mechanical terahertz modulators based on stretchable carbon nanotube thin films

For terahertz (THz) wave applications, tunable and rapid modulation is highly required. When studied by means of optical pump-terahertz probe spectroscopy, single-walled carbon nanotubes (SWCNTs) thin films demonstrated ultrafast carrier recombination lifetimes with a high relative change in the signal under optical excitation, making them promising candidates for high-speed modulators. Here, combination of SWCNTthin films and stretchable substrates facilitated studies of the SWCNT mechanical properties under strain,and enabled the development of a new type of an opto-mechanical modulator. By applying a certain strain to the SWCNT films, the effective sheet conductance and therefore modulation depth can be fine-tuned to optimize the designed modulator. Modulators exhibited a photoconductivity change of 3-4 orders of magnitude under the strain due to the structural modification in the SWCNT network. Stretching was used to control the THz signal with a modulation depth of around 100 % without strain and 65 % at a high strainoperation of 40 %. The sensitivity of modulators to beam polarisation is also shown, which might also come in handy for the design of a stretchable polariser. Our results give a fundamental grounding for the design of high-sensitivity stretchable devices based on SWCNT films.

cond-mat.mes-hall↗

arXiv2022

High-refractive index and mechanically cleavable non-van der Waals InGaS3

The growing families of two-dimensional crystals derived from naturally occurring van der Waals materials offer an unprecedented platform to investigate elusive physical phenomena and could be of use in a diverse range of devices. Of particular interest are recently reported atomic sheets of non-van der Waals materials, which could allow a better comprehension of the nature of structural bonds and increase the functionality of prospective heterostructures. Here, we study the optostructural properties of ultrathin non-van der Waals InGaS3 sheets produced by standard mechanical cleavage. Our ab initio calculation results suggest an emergence of authentically delicate out-of-plane covalent bonds within its unit cell, and, as a consequence, an artificial generation of layered structure within the material. Those yield to singular layer isolation energies of around 50 meVA-2, which is comparable with the conventional van der Waals material's monolayer isolation energies of 20 - 60 meVA-2. In addition, we provide a comprehensive analysis of the structural, vibrational, and optical properties of the materials presenting that it is a wide bandgap (2.73 eV) semiconductor with a high-refractive index (higher than 2.5) and negligible losses in the visible and infrared spectral ranges. It makes it a perfect candidate for further establishment of visible-range all-dielectric nanophotonics.

cond-mat.mtrl-sci↗

arXiv2022

Anapole states and scattering deflection effects in anisotropic van der Waals nanoparticles

Transition metal dichalcogenides (TMDCs), belonging to the class of van der Waals materials, are promising materials for optoelectronics and photonics. In particular, their giant optical anisotropy may enable important optical effects when employed in nanostructures with finite thickness. In this paper, we theoretically and numerically study light scattering behavior from anisotropic MoS2 nanocylinders, and highlight its distinct features advantageous over the response of conventional silicon particles of the same shape. We establish two remarkable phenomena, appearing in the same MoS2 particle with optimized geometry. The first one is a pure magnetic dipole scattering associated with the excitation of the electric-dipole anapole states. Previously reported in core-shell hybrid (metal/dielectric) systems only, it is now demonstrated in an all-dielectric particle. The second phenomenon is the super-deflection in the far field: the maximum scattering may occur over a wide range of directions, including forward-, backward- and side-scattering depending on the mutual orientation of the MoS2 nanocylinder and the incident wave. In contrast to the well-known Kerker and anti-Kerker effects, which appear in nanoparticles at different frequencies, the super-deflection can be achieved by rotating the particle at a constant frequency of incident light. Our results facilitate the development of functional optical devices incorporating nanostructured anisotropic TMDCs and may encourage further research in meta-optics based on highly anisotropic materials.

physics.optics↗

arXiv2021

Nonlinear exciton-Mie coupling in transition metal dichalcogenides nanoresonators

Molybdenum disulfide (MoS2) is a layered material of transition metal dichalcogenides (TMDCs) with a high refractive index in the visible and infrared spectral range. Therefore, by constructing MoS2 into dielectric nanoresonators, one can generate highly confined electromagnetic Mie-type modes. In this work, we applied lithography and etching techniques to single crystal MoS2 flakes to fabricate nanodisks that support magnetic dipole Mie resonances in near infrared spectral range. The nanodisks were studied by second-harmonic generation (SHG) rotational anisotropy revealing the retention of crystallinity and the orientation of the crystallographic axes of the single disk structure after fabrication. Magnetic dipole resonances manifest as resonant intensity enhancement in SHG spectra. Tuning Mie resonances by selecting the geometrical size of MoS2 nanodisks, we demonstrated strongly enhanced SHG due to the overlap of the optical resonance at the fundamental wavelength with the C-exciton resonance at the second-harmonic wavelength.

physics.optics↗

arXiv2021

Peculiarities and evolution of Raman spectra of multilayer Ge/Si(001) heterostructures containing arrays of low-temperature MBE-grown Ge quantum dots of different size and number density: Experimental studies and numerical simulations

Ge/Si(001) multilayer heterostructures containing arrays of low-temperature self-assembled Ge quantum dots and very thin Si$_x$Ge$_{1-x}$ layers of varying composition and complex geometry have been studied using Raman spectroscopy and scanning tunneling microscopy. The dependence of Raman spectra on the effective thickness of deposited Ge layers has been investigated in detail in the range from 4 to 18 Å. The position and shape of both Ge and SiGe vibrational modes are of great interest since they are closely related to the strain and composition of the material that plays a role of active component in perspective optoelectronic devices based on such structures. In this work, we present an explanation for some peculiar features of Raman spectra, which makes it possible to control the quality of the grown heterostructures more effectively. A dramatic increase of intensity of both the Ge$-$Ge and Si$-$Ge bands for the structure containing Ge layers of 10 Å and anomalous shift and broadening of the Si$-$Ge band for structures comprising Ge layers of 8 and 9 Å thick were observed. In our model, the anomalous behavior of the Raman spectra with the change of thickness of deposited Ge is connected with the flatness of Ge layers as well as transitional SiGe domains formed via the stress-induced diffusion from {105} facets of quantum dots. The conclusions are supported by the STM studies and the numerical calculations.

cond-mat.mtrl-sci↗

arXiv2018

Ultrathin and ultrasmooth gold films on monolayer MoS2

Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown by chemical vapor deposition are investigated by spectroscopic ellipsometry over a wide wavelength range (300-3300 nm). Results show that optical losses in ultrathin films increase with decreasing thickness due to the fine-grained structure and the presence of a small number of voids, however, they exhibit metallic properties down to a thickness of 3-4 nm. The atomic-scale MoS2 interfaces can be transferred to any substrate and thus open up new opportunities for the creation of metasurfaces and a new type of van der Waals heterostructures with atomically thin metal layers.

physics.app-ph↗

arXiv2015

Full loss compensation in hybrid plasmonic waveguides under electrical pumping

Surface plasmon polaritons (SPPs) give an opportunity to break the diffraction limit and design nanoscale optical components, however their practical implementation is hindered by high ohmic losses in a metal. Here, we propose a novel approach for efficient SPP amplification under electrical pumping in a deep-subwavelength metal-insulator-semiconductor waveguiding geometry and numerically demonstrate full compensation for the SPP propagation losses in the infrared at an exceptionally low pump current density of 0.8 kA/cm$^2$. This value is an order of magnitude lower than in the previous studies owing to the thin insulator layer between a metal and a semiconductor, which allows injection of minority carriers and blocks majority carriers reducing the leakage current to nearly zero. The presented results provide insight into lossless SPP guiding and development of future high dense nanophotonic and optoelectronic circuits.

cond-mat.mes-hall↗

arXiv2008

Coherent terahertz needle radiation emission mechanism from nanostructured ferromagnetic metal films excited by femtosecond laser pulses

A coherent terahertz needle radiation emission mechanism is proposed. This mechanism can be realized in the experiments on femtosecond laser pulses interacting with surface of nanostructured ferromagnetic metal film. The proposed mechanism is based on exciting of coupled coherent phonon-magnon modes on a nanostructured metal surface by laser femtosecond pulse. The value of the Poynting vector for the terahertz radiation is estimated.

physics.optics↗