Searcharxiv⌕ Search

arXiv subjects

Alessandra Buonanno

Publications and source records attributed to Alessandra Buonanno.

At least 163 records · Page 9Linked to original sources

Detecting gravitational waves from precessing binaries of spinning compact objects: Adiabatic limit

Black-hole (BH) binaries with single-BH masses m=5--20 Msun, moving on quasicircular orbits, are among the most promising sources for first-generation ground-based gravitational-wave (GW) detectors. Until now, the development of data-analysis techniques to detect GWs from these sources has been focused mostly on nonspinning BHs. The data-analysis problem for the spinning case is complicated by the necessity to model the precession-induced modulations of the GW signal, and by the large number of parameters needed to characterize the system, including the initial directions of the spins, and the position and orientation of the binary with respect to the GW detector. In this paper we consider binaries of maximally spinning BHs, and we work in the adiabatic-inspiral regime to build families of modulated detection templates that (i) are functions of very few physical and phenomenological parameters, (ii) model remarkably well the dynamical and precessional effects on the GW signal, with fitting factors on average >~ 0.97, but (iii) might require increasing the detection thresholds, offsetting at least partially the gains in the fitting factors. Our detection-template families are quite promising also for the case of neutron-star--black-hole binaries, with fitting factors on average ~ 0.93. For these binaries we also suggest (but do not test) a further template family, which would produce essentially exact waveforms written directly in terms of the physical spin parameters.

gr-qc↗

A physical template family for gravitational waves from precessing binaries of spinning compact objects: Application to single-spin binaries

The detection of the gravitational waves (GWs) emitted by precessing binaries of spinning compact objects is complicated by the large number of parameters (such as the magnitudes and initial directions of the spins, and the position and orientation of the binary with respect to the detector) that are required to model accurately the precession-induced modulations of the GW signal. In this paper we describe a fast matched-filtering search scheme for precessing binaries, and we adopt the physical template family proposed by Buonanno, Chen, and Vallisneri [Phys.Rev.D 67, 104025 (2003)] for ground-based interferometers. This family provides essentially exact waveforms, written directly in terms of the physical parameters, for binaries with a single significant spin, and for which the observed GW signal is emitted during the phase of adiabatic inspiral (for LIGO-I and VIRGO, this corresponds to a total mass M < 15Msun). We show how the detection statistic can be maximized automatically over all the parameters (including the position and orientation of the binary with respect to the detector), except four (the two masses, the magnitude of the single spin, and the opening angle between the spin and the orbital angular momentum), so the template bank used in the search is only four-dimensional; this technique is relevant also to the searches for GW from extreme--mass-ratio inspirals and supermassive blackhole inspirals to be performed using the space-borne detector LISA. Using the LIGO-I design sensitivity, we compute the detection threshold (~10) required for a false-alarm probability of 10^(-3)/year, and the number of templates (~76,000) required for a minimum match of 0.97, for the mass range (m1,m2)=[7,12]Msun*[1,3]Msun.

gr-qc↗

A quasi-physical family of gravity-wave templates for precessing binaries of spinning compact objects: Application to double-spin precessing binaries

The gravitational waveforms emitted during the adiabatic inspiral of precessing binaries with two spinning compact bodies of comparable masses, evaluated within the post-Newtonian approximation, can be reproduced rather accurately by the waveforms obtained by setting one of the two spins to zero, at least for the purpose of detection by ground-based gravitational-wave interferometers. Here we propose to use this quasi-physical family of single-spin templates to search for the signals emitted by double-spin precessing binaries, and we find that its signal-matching performance is satisfactory for source masses (m1,m2) in [3,15]Msun x [3,15]Msun. For this mass range, using the LIGO-I design sensitivity, we estimate that the number of templates required to yield a minimum match of 0.97 is ~320,000. We discuss also the accuracy to which the single-spin template family can be used to estimate the parameters of the original double-spin precessing binaries.

gr-qc↗

Accessibility of the Pre-Big-Bang Models to LIGO

The recent search for a stochastic background of gravitational waves with LIGO interferometers has produced a new upper bound on the amplitude of this background in the 100 Hz region. We investigate the implications of the current and future LIGO results on pre-Big-Bang models of the early Universe, determining the exclusion regions in the parameter space of the minimal pre-Big Bang scenario. Although the current LIGO reach is still weaker than the indirect bound from Big-Bang nucleosynthesis, future runs by LIGO, in the coming year, and by Advanced LIGO (~2009) should further constrain the parameter space, and in some parts surpass the Big-Bang nucleosynthesis bound. It will be more diffcult to constrain the parameter space in non-minimal pre-Big-Bang models, which are characterized by multiple cosmological phases in the yet not well understood stringy phase, and where the higher-order curvature and/or quantum-loop corrections in the string effective action should be included.

astro-ph↗

Detecting gravitational waves from precessing binaries of spinning compact objects. II. Search implementation for low-mass binaries

Detection template families (DTFs) are built to capture the essential features of true gravitational waveforms using a small set of phenomenological waveform parameters. Buonanno, Chen, and Vallisneri [Phys. Rev. D 67, 104025 (2003)] proposed the ``BCV2'' DTF to perform computationally efficient searches for signals from precessing binaries of compact stellar objects. Here we test the signal-matching performance of the BCV2 DTF for asymmetric--mass-ratio binaries, and specifically for double--black-hole binaries with component masses (m1,m2): (6~12Msun, 1~3Msun), and for black-hole--neutron-star binaries with component masses (m1,m2) = (10Msun, 1.4Msun); we take all black holes to be maximally spinning. We find a satisfactory signal-matching performance, with fitting factors averaging between 0.94 and 0.98. We also scope out the region of BCV2 parameters needed for a template-based search, we evaluate the template match metric, we discuss a template-placement strategy, and we estimate the number of templates needed for searches at the LIGO design sensitivity. In addition, after gaining more insight in the dynamics of spin--orbit precession, we propose a modification of the BCV2 DTF that is parametrized by physical (rather than phenomenological) parameters. We test this modified ``BCV2P'' DTF for the (10Msun, 1.4Msun) black-hole--neutron-star system, finding a signal-matching performance comparable to the BCV2 DTF, and a reliable parameter-estimation capability for target-binary quantities such as the chirp mass and the opening angle (the angle between the black-hole spin and the orbital angular momentum).

gr-qc↗

Transition from inspiral to plunge in precessing binaries of spinning black holes

We investigate the non-adiabatic dynamics of spinning black hole binaries by using an analytical Hamiltonian completed with a radiation-reaction force, containing spin couplings, which matches the known rates of energy and angular momentum losses on quasi-circular orbits. We consider both a straightforward post-Newtonian-expanded Hamiltonian (including spin-dependent terms), and a version of the resummed post-Newtonian Hamiltonian defined by the Effective One-Body approach. We focus on the influence of spin terms onto the dynamics and waveforms. We evaluate the energy and angular momentum released during the final stage of inspiral and plunge. For an equal-mass binary the energy released between 40Hz and the frequency beyond which our analytical treatment becomes unreliable is found to be, when using the more reliable Effective One-Body dynamics: 0.6% M for anti-aligned maximally spinning black holes, 5% M for aligned maximally spinning black hole, and 1.8% M for non-spinning configurations. In confirmation of previous results, we find that, for all binaries considered, the dimensionless rotation parameter J/E^2 is always smaller than unity at the end of the inspiral, so that a Kerr black hole can form right after the inspiral phase. By matching a quasi-normal mode ringdown to the last reliable stages of the plunge, we construct complete waveforms approximately describing the gravitational wave signal emitted by the entire process of coalescence of precessing binaries of spinning black holes.

gr-qc↗

Stochastic Gravitational Wave Background from Cosmological Supernovae

Based on new developments in the understanding of supernovae (SNe) as gravitational-wave (GW) sources we estimate the GW background from all cosmic SNe. For a broad range of frequencies around 1 Hz, this background is crudely comparable to the GW background expected from standard inflationary models. While our estimate remains uncertain within several orders of magnitude, the SN GW background may become detectable by second-generation space-based interferometers such as the proposed Big-Bang Observatory (BBO). By the same token, the SN GWs may become a foreground for searches of the inflationary GWs, in particular for sub-Hz frequencies where the SN background is Gaussian and where the BBO will be most sensitive. SN simulations lasting far beyond the usual cutoff of about 1 second are needed for more robust predictions in the sub-Hz frequency band. An even larger GW background can arise from a hypothetical early population of massive stars, although their GW source strength as well as their abundance are currently poorly understood.

astro-ph↗

Testing general relativity and probing the merger history of massive black holes with LISA

Observations of binary inspirals with LISA will allow us to place bounds on alternative theories of gravity and to study the merger history of massive black holes (MBH). These possibilities rely on LISA's parameter estimation accuracy. We update previous studies of parameter estimation including non-precessional spin effects. We work both in Einstein's theory and in alternative theories of gravity of the scalar-tensor and massive-graviton types. Inclusion of non-precessional spin terms in MBH binaries has little effect on the angular resolution or on distance determination accuracy, but it degrades the estimation of the chirp mass and reduced mass by between one and two orders of magnitude. The bound on the coupling parameter of scalar-tensor gravity is significantly reduced by the presence of spin couplings, while the reduction in the graviton-mass bound is milder. LISA will measure the luminosity distance of MBHs to better than ~10% out to z~4 for a (10^6+10^6) Msun binary, and out to z~2 for a (10^7+10^7) Msun binary. The chirp mass of a MBH binary can always be determined with excellent accuracy. Ignoring spin effects, the reduced mass can be measured within ~1% out to z=10 and beyond for a (10^6+10^6) Msun binary, but only out to z~2 for a (10^7+10^7) Msun binary. Present-day MBH coalescence rate calculations indicate that most detectable events should originate at z~2-6: at these redshifts LISA can be used to measure the two black hole masses and their luminosity distance with sufficient accuracy to probe the merger history of MBHs. If the low-frequency LISA noise can only be trusted down to 10^-4 Hz, parameter estimation for MBHs (and LISA's ability to perform reliable cosmological observations) will be significantly degraded.

gr-qc↗

Estimating spinning binary parameters and testing alternative theories of gravity with LISA

We investigate the effect of spin-orbit and spin-spin couplings on the estimation of parameters for inspiralling compact binaries of massive black holes, and for neutron stars inspiralling into intermediate-mass black holes, using hypothetical data from the proposed Laser Interferometer Space Antenna (LISA). We work both in Einstein's theory and in alternative theories of gravity of the scalar-tensor and massive-graviton types. We restrict the analysis to non-precessing spinning binaries, i.e. to cases where the spins are aligned normal to the orbital plane. We find that the accuracy with which intrinsic binary parameters such as chirp mass and reduced mass can be estimated within general relativity is degraded by between one and two orders of magnitude. We find that the bound on the coupling parameter omega_BD of scalar-tensor gravity is significantly reduced by the presence of spin couplings, while the reduction in the graviton-mass bound is milder. Using fast Monte-Carlo simulations of 10^4 binaries, we show that inclusion of spin terms in massive black-hole binaries has little effect on the angular resolution or on distance determination accuracy. For stellar mass inspirals into intermediate-mass black holes, the angular resolution and the distance are determined only poorly, in all cases considered. We also show that, if LISA's low-frequency noise sensitivity can be extrapolated from 10^-4 Hz to as low as 10^-5 Hz, the accuracy of determining both extrinsic parameters (distance, sky location) and intrinsic parameters (chirp mass, reduced mass) of massive binaries may be greatly improved.

gr-qc↗

The dynamics of precessing binary black holes using the post-Newtonian approximation

We investigate the (conservative) dynamics of binary black holes using the Hamiltonian formulation of the post-Newtonian (PN) equations of motion. The Hamiltonian we use includes spin-orbit coupling, spin-spin coupling, and mass monopole/spin-induced quadrupole interaction terms. In the case of both quasi-circular and eccentric orbits, we search for the presence of chaos (using the method of Lyapunov exponents) for a large variety of initial conditions. For quasi-circular orbits, we find no chaotic behavior for black holes with total mass 10 - 40 solar masses when initially at a separation corresponding to a Newtonian gravitational-wave frequency less than 150 Hz. Only for rather small initial radial distances, for which spin-spin induced oscillations in the radial separation are rather important, do we find chaotic solutions, and even then they are rare. Moreover, these chaotic quasi-circular orbits are of questionable astrophysical significance, since they originate from direct parametrization of the equations of motion rather than from widely separated binaries evolving to small separations under gravitational radiation reaction. In the case of highly eccentric orbits, which for ground-based interferometers are not astrophysically favored, we again find chaotic solutions, but only at pericenters so small that higher order PN corrections, especially higher spin PN corrections, should also be taken into account.

gr-qc↗

TASI Lectures on Gravitational Waves from the Early Universe

These lectures discuss how the direct detection of gravitational waves can be used to probe the very early Universe. We review the main cosmological mechanisms which could have produced relic gravitational waves, and compare theoretical predictions with capabilities and time scales of current and upcoming experiments.

gr-qc↗

Improving the sensitivity to gravitational-wave sources by modifying the input-output optics of advanced interferometers

We study frequency dependent (FD) input-output schemes for signal-recycling interferometers, the baseline design of Advanced LIGO and the current configuration of GEO 600. Complementary to a recent proposal by Harms et al. to use FD input squeezing and ordinary homodyne detection, we explore a scheme which uses ordinary squeezed vacuum, but FD readout. Both schemes, which are sub-optimal among all possible input-output schemes, provide a global noise suppression by the power squeeze factor, while being realizable by using detuned Fabry-Perot cavities as input/output filters. At high frequencies, the two schemes are shown to be equivalent, while at low frequencies our scheme gives better performance than that of Harms et al., and is nearly fully optimal. We then study the sensitivity improvement achievable by these schemes in Advanced LIGO era (with 30-m filter cavities and current estimates of filter-mirror losses and thermal noise), for neutron star binary inspirals, and for narrowband GW sources such as low-mass X-ray binaries and known radio pulsars. Optical losses are shown to be a major obstacle for the actual implementation of these techniques in Advanced LIGO. On time scales of third-generation interferometers, like EURO/LIGO-III (~2012), with kilometer-scale filter cavities, a signal-recycling interferometer with the FD readout scheme explored in this paper can have performances comparable to existing proposals. [abridged]

gr-qc↗

Quantum noise in laser-interferometer gravitational-wave detectors with a heterodyne readout scheme

We analyze and discuss the quantum noise in signal-recycled laser interferometer gravitational-wave detectors, such as Advanced LIGO, using a heterodyne readout scheme and taking into account the optomechanical dynamics. Contrary to homodyne detection, a heterodyne readout scheme can simultaneously measure more than one quadrature of the output field, providing an additional way of optimizing the interferometer sensitivity, but at the price of additional noise. Our analysis provides the framework needed to evaluate whether a homodyne or heterodyne readout scheme is more optimal for second generation interferometers from an astrophysical point of view. As a more theoretical outcome of our analysis, we show that as a consequence of the Heisenberg uncertainty principle the heterodyne scheme cannot convert conventional interferometers into (broadband) quantum non-demolition interferometers.

gr-qc↗

Scaling law in signal recycled laser-interferometer gravitational-wave detectors

By mapping the signal-recycling (SR) optical configuration to a three-mirror cavity, and then to a single detuned cavity, we express SR optomechanical dynamics, input--output relation and noise spectral density in terms of only three characteristic parameters: the (free) optical resonant frequency and decay time of the entire interferometer, and the laser power circulating in arm cavities. These parameters, and therefore the properties of the interferometer, are invariant under an appropriate scaling of SR-mirror reflectivity, SR detuning, arm-cavity storage time and input power at beamsplitter. Moreover, so far the quantum-mechanical description of laser-interferometer gravitational-wave detectors, including radiation-pressure effects, was only obtained at linear order in the transmissivity of arm-cavity internal mirrors. We relax this assumption and discuss how the noise spectral densities change.

gr-qc↗

Laser-interferometer gravitational-wave optical-spring detectors

Using a quantum mechanical approach, we show that in a gravitational-wave interferometer composed of arm cavities and a signal recycling cavity, e.g., the LIGO-II configuration, the radiation-pressure force acting on the mirrors not only disturbs the motion of the free masses randomly due to quantum fluctuations, but also and more fundamentally, makes them respond to forces as though they were connected to an (optical) spring with a specific rigidity. This oscillatory response gives rise to a much richer dynamics than previously known, which enhances the possibilities for reshaping the LIGO-II's noise curves. However, the optical-mechanical system is dynamically unstable and an appropriate control system must be introduced to quench the instability.

gr-qc↗

Gravitational waves from inspiraling binary black holes

Binary black holes are the most promising candidate sources for the first generation of earth-based interferometric gravitational-wave detectors. We summarize and discuss the state-of-the-art analytic techniques developed during the last years to better describe the late dynamical evolution of binary black holes of comparable masses.

gr-qc↗

Optical noise correlations and beating the standard quantum limit in advanced gravitational-wave detectors

The uncertainty principle, applied naively to the test masses of a laser-interferometer gravitational-wave detector, produces a Standard Quantum Limit (SQL) on the interferometer's sensitivity. It has long been thought that beating this SQL would require a radical redesign of interferometers. However, we show that LIGO-II interferometers, currently planned for 2006, can beat the SQL by as much as a factor two over a bandwidth Δf \sim f, if their thermal noise can be pushed low enough. This is due to dynamical correlations between photon shot noise and radiation-pressure noise, produced by the LIGO-II signal-recycling mirror.

gr-qc↗

Quantum noise in second generation, signal-recycled laser interferometric gravitational-wave detectors

It has long been thought that the sensitivity of laser interferometric gravitational-wave detectors is limited by the free-mass standard quantum limit, unless radical redesigns of the interferometers or modifications of their input/output optics are introduced. Within a fully quantum-mechanical approach we show that in a second-generation interferometer composed of arm cavities and a signal recycling cavity, e.g., the LIGO-II configuration, (i) quantum shot noise and quantum radiation-pressure-fluctuation noise are dynamically correlated, (ii) the noise curve exhibits two resonant dips, (iii) the Standard Quantum Limit can be beaten by a factor of 2, over a frequency range Δf/f \sim 1, but at the price of increasing noise at lower frequencies.

gr-qc↗