Searcharxiv⌕ Search

arXiv subjects

Alessandro R. Mazza

Publications and source records attributed to Alessandro R. Mazza.

At least 19 recordsLinked to original sources
arXiv2026

Intrinsic Even-Odd Thickness-Driven Anomalous Hall in Epitaxial MnBi2Te4 Thin Films

We demonstrate precise control of magnetism in MnBi2Te4 thin films through careful synthesis by molecular beam epitaxy, achieving minimal defects and accurate layer thickness control. By optimizing Mn-Bi-Te ratios and growth temperatures, we minimize detrimental self-doping effects and accurately target integer-layer films. X-ray diffraction and reflectivity provide quantitative measures of film quality and thickness. When these macroscale probes of structure and thickness are integrated with magnetotransport measurements, a striking even-odd layer dependence of the anomalous Hall effect is revealed. Odd-layer films exhibit a large hysteresis up to the Néel temperature (~25K), consistent with non-compensated antiferromagnetism, while even-layer films show minimal response, as expected for an antiferromagnet. The sign of the anomalous Hall effect exhibits a sign reversal for intrinsic magnetism versus magnetism associated with defects. This work identifies critical factors for inducing pure, non-compensated ferromagnetism and reveals the character of the intrinsic anomalous Hall effect in MnBi2Te4, which together is a step towards realizing the zero-field quantum anomalous Hall effect in topological materials.

cond-mat.mtrl-sci↗
arXiv2026

Nucleation and Antiphase Twin Control in Bi$_2$Se$_3$ via Step-Terminated Al$_2$O$_3$ Substrates

The epitaxial synthesis of high-quality 2D layered materials is an essential driver of both fundamental physics studies and technological applications. Bi$_2$Se$_3$, a prototypical 2D layered topological insulator, is sensitive to defects imparted during the growth, either thermodynamically or due to the film-substrate interaction. In this study, it is shown that step-terminated Al$_2$O$_3$ substrates with a high miscut angle (3°) can effectively suppress a particular hard-to-mitigate defect, the antiphase twin. Systematic investigations across a range of growth temperatures and substrate miscut angles confirm that atomic step edges act as preferential nucleation sites, stabilizing a single twin domain. First-principles calculations suggest that there is a significant energy barrier for twin boundary formation at step edges, supporting the experimental observations. Detailed structural characterization indicates that this twin-selectivity is lost through the mechanism of the 2D layers overgrowing the step edges, leading to higher twin density as the thickness increases. These findings highlight the complex energy landscape unique to 2D materials that is driven by the interplay between substrate properties, nucleation dynamics, and defect formation, and overcoming and controlling these are critical to improve material quality for quantum and electronic applications.

cond-mat.mtrl-sci↗
arXiv2025

Programmable phase selection between altermagnetic and non-centrosymmetric polymorphs of MnTe on InP via molecular beam epitaxy

Phase selecting nearly degenerate crystalline polymorphs during epitaxial growth can be challenging yet is critical to targeting physical properties for specific applications. Here, we establish how phase selectivity of altermagnetic and non-centrosymmetric polymorphs of MnTe with high structural quality and phase purity can be programmed by subtle changes to the surface of lattice-matched InP substrates in molecular beam epitaxial (MBE) growth. Bulk altermagnetic MnTe is thermodynamically stable in the hexagonal NiAs-structure and is synthesized here on the (111)A surface (In-terminated) of InP, while the non-centrosymmetric, cubic ZnS-structure with wide band gap (> 3eV) is stabilized on the (111)B surface (P-terminated). Here we use electron microscopy, photoemission spectroscopy, and reflection high-energy electron diffraction, which together indicate that the phase selection is triggered at the interface and proceeds along the growing surface. First principles calculations suggest that interfacial termination and strain have a significant effect on the interfacial energy; stabilizing the NiAs polymorph on the In-terminated surface and the ZnS structure on the P-terminated surface. Selectively grown, high-quality films of MnTe polymorphs are key platforms that will enable our understanding of the novel properties of these materials, thereby facilitating their use in new applications ranging from spintronics to microelectronic devices.

cond-mat.mtrl-sci↗
arXiv2025

Single-layer magnet phase in intrinsic magnetic topological insulators, $[\mathrm{MnTe}][\mathrm{Bi}_{2}\mathrm{Te}_{3}]_{\mathrm{n}}$, far beyond the thermodynamic limit

The intrinsic magnetic topological insulator (IMTI) family $[\mathrm{MnTe}][\mathrm{Bi}_{2}\mathrm{Te}_{3}]_{\mathrm{n}}$ has demonstrated magneto-topological properties dependent on $n$, making it a promising platform for advanced electronics and spintronics. However, due to technical barriers in sample synthesis, their properties in the large $n$ limit remain unknown. To overcome this, we utilized the atomic layer-by-layer molecular beam epitaxy (ALL-MBE) technique and achieved IMTIs with $n$ as large as 15, far beyond the previously reported in bulk crystals or thin films. Then, we discover that the "single-layer magnet (SLM)" phase, primarily determined by intralayer ferromagnetic coupling, emerges for $n >$ $\sim 4$ and remains little affected up to $n = 15$. Nonetheless, still, non-zero, interlayer ferromagnetic coupling is necessary to stabilize the SLM phase, suggesting that the SLM phase eventually disappears in the $n\to\infty$ limit. This study uncovers the secrets of IMTIs beyond the thermodynamic limit and opens a door to diverse magneto-topological applications.

cond-mat.mes-hall↗
arXiv2024

Stoichiometry-induced ferromagnetism in altermagnetic candidate MnTe

The field of spintronics has seen a surge of interest in altermagnetism due to novel predictions and many possible applications. MnTe is a leading altermagnetic candidate that is of significant interest across spintronics due to its layered antiferromagnetic structure, high Neel temperature (TN ~ 310 K) and semiconducting properties. We present results on molecular beam epitaxy (MBE) grown MnTe/InP(111) films. Here, it is found that the electronic and magnetic properties are driven by the natural stoichiometry of MnTe. Electronic transport and in situ angle-resolved photoemission spectroscopy show the films are natively metallic with the Fermi level in the valence band and the band structure is in good agreement with first principles calculations for altermagnetic spin-splitting. Neutron diffraction confirms that the film is antiferromagnetic with planar anisotropy and polarized neutron reflectometry indicates weak ferromagnetism, which is linked to a slight Mn-richness that is intrinsic to the MBE grown samples. When combined with the anomalous Hall effect, this work shows that the electronic response is strongly affected by the ferromagnetic moment. Altogether, this highlights potential mechanisms for controlling altermagnetic ordering for diverse spintronic applications.

cond-mat.mtrl-sci↗
arXiv2024

Interfacially enhanced superconductivity in Fe(Te,Se)/Bi4Te3 heterostructures

Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system in the low-Se doping regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T_{C}^{onset}$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when $Bi_2Te_3$ is replaced with the topological phase $Bi_4Te_3$. Interfacing Fe(Te,Se) with $Bi_4Te_3$ is also found to be critical for stabilizing superconductivity in monolayer films where $T_{C}^{onset}$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the $Bi_4Te_3$ layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing $T_C$ in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.

cond-mat.supr-con↗
arXiv2024

Buffer-layer-controlled Nickeline vs Zinc-Blende/Wurtzite-type MnTe growths on c-plane Al2O3 substrates

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe]m[Bi2Te3]n, which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi2Te3]n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe-nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 +/- 0.04 A and 4.39 +/- 0.04 A, respectively-can be selectively grown on c-plane Al2O3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In2Se3 buffer layer, despite its lattice constant (4.02 A) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi2Te3, sharing the same lattice constant (4.39 A) with the ZB-WZ phase, fosters the NC phase. These discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

cond-mat.mtrl-sci↗
arXiv2023

High-throughput combinatorial approach expedites the synthesis of a lead-free relaxor ferroelectric system

Developing novel lead-free ferroelectric materials is crucial for next-generation microelectronic technologies that are energy efficient and environment friendly. However, materials discovery and property optimization are typically time-consuming due to the limited throughput of traditional synthesis methods. In this work, we use a high-throughput combinatorial synthesis approach to fabricate lead-free ferroelectric superlattices and solid solutions of (Ba0.7Ca0.3)TiO3 (BCT) and Ba(Zr0.2Ti0.8)O3 (BZT) phases with continuous variation of composition and layer thickness. High-resolution X-ray diffraction (XRD) and analytical scanning transmission electron microscopy (STEM) demonstrate high film quality and well-controlled compositional gradients. Ferroelectric and dielectric property measurements identify the optimal property point achieved at the morphotropic phase boundary (MPB) with a composition of 48BZT-52BCT. Displacement vector maps reveal that ferroelectric domain sizes are tunable by varying {BCT-BZT}N superlattice geometry. This high-throughput synthesis approach can be applied to many other material systems to expedite new materials discovery and properties optimization, allowing for the exploration of a large area of phase space within a single growth.

cond-mat.mtrl-sci↗
arXiv2023

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics.

cond-mat.mtrl-sci↗
arXiv2023

Structural Anisotropy in Sb Thin Films

Sb thin films have attracted wide interests due to their tunable band structure, topological phases, and remarkable electronic properties. We successfully grow epitaxial Sb thin films on a closely lattice-matched GaSb(001) surface by molecular beam epitaxy. We find a novel anisotropic directional dependence of their structural, morphological, and electronic properties. The origin of the anisotropic features is elucidated using first-principles density functional theory (DFT) calculations. The growth regime of crystalline and amorphous Sb thin films was determined by mapping the surface reconstruction phase diagram of the GaSb(001) surface under Sb$_2$ flux, with confirmation of structural characterizations. Crystalline Sb thin films show a rhombohedral crystal structure along the rhombohedral (104) surface orientation parallel to the cubic (001) surface orientation of the GaSb substrate. At this coherent interface, Sb atoms are aligned with the GaSb lattice along the [1-10] crystallographic direction but are not aligned well along the [110] crystallographic direction, which results in anisotropic features in reflection high-energy electron diffraction patterns, surface morphology, and transport properties. Our DFT calculations show that the anisotropic features originate from the GaSb surface, where Sb atoms align with the Ga and Sb atoms on the reconstructed surface. The formation energy calculations confirm that the stability of the experimentally observed structures. Our results provide optimal film growth conditions for further studies of novel properties of Bi$_{1-x}$Sb$_x$ thin films with similar lattice parameters and an identical crystal structure as well as functional heterostructures of them with III-V semiconductor layers along the (001) surface orientation, supported by a theoretical understanding of the anisotropic film orientation.

cond-mat.mtrl-sci↗
arXiv2023

Hole doping in compositionally complex correlated oxide enables tunable exchange biasing

Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO3 perovskite oxide La1-xSrx(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.

cond-mat.str-el↗
arXiv2023

Observation of 2D Weyl Fermion States in Epitaxial Bismuthene

A two-dimensional (2D) Weyl semimetal featuring a spin-polarized linear band dispersion and a nodal Fermi surface is a new topological phase of matter. It is a solid-state realization of Weyl fermions in an intrinsic 2D system. The nontrivial topology of 2D Weyl cones guarantees the existence of a new form of topologically protected boundary states, Fermi string edge states. In this work, we report the realization of a 2D Weyl semimetal in monolayer-thick epitaxial bismuthene grown on SnS(Se) substrate. The intrinsic band gap of bismuthene is eliminated by the space-inversion-symmetry-breaking substrate perturbations, resulting in a gapless spin-polarized Weyl band dispersion. The linear dispersion and spin polarization of the Weyl fermion states are observed in our spin and angle-resolved photoemission measurements. In addition, the scanning tunneling microscopy/spectroscopy reveals a pronounced local density of states at the edge, suggesting the existence of Fermi string edge states. These results open the door for the experimental exploration of the exotic properties of Weyl fermion states in reduced dimensions.

cond-mat.mtrl-sci↗
arXiv2023

Tuning Structural, Transport and Magnetic Properties of Epitaxial SrRuO3 through Ba-Substitution

The perovskite ruthenates (ARuO3, A = Ca, Ba, or Sr) exhibit unique properties owing to a subtle interplay of crystal structure and electronic-spin degrees of freedom. Here, we demonstrate an intriguing continuous tuning of crystal symmetry from orthorhombic to tetragonal (no octahedral rotations) phases in epitaxial SrRuO3 achieved via Ba-substitution (Sr1-xBaxRuO3 with 0 < x < 0.7). An initial Ba-substitution to SrRuO3 not only changes the ferromagnetic properties, but also tunes the perpendicular magnetic anisotropy via flattening the Ru-O-Ru bond angle (to 180°), resulting in the maximum Curie temperature and an extinction of RuO6 rotational distortions at x = 0.20. For x > 0.2, the suppression of RuO6 octahedral rotational distortion dominantly enhances the ferromagnetism in the system, though competing with the impact of the RuO6 tetragonal distortion. Further increasing x > 0.2 gradually enhances the tetragonal-type distortion, resulting in the tuning of Ru-4d orbital occupancy and suppression of ferromagnetism. Our results demonstrate that isovalent substitution of the A-site cations significantly and controllably impacts both electronic and magnetic properties of perovskite oxides.

cond-mat.mtrl-sci↗
arXiv2022

What is in a Name: Defining -High Entropy- Oxides

High entropy oxides are emerging as an exciting new avenue to design highly tailored functional behaviors that have no traditional counterparts. Study and application of these materials are bringing together scientists and engineers from physics, chemistry, and materials science. The diversity of each of these disciplines comes with perspectives and jargon that may be confusing to those outside of the individual fields, which can result in miscommunication of important aspects of research. In this perspective, we provide examples of research and characterization taken from these different fields to provide a framework for classifying the differences between compositionally complex oxides, high entropy oxides, and entropy stabilized oxides, which is intended to bring a common language to this emerging area. We highlight the critical importance of understanding a materials crystallinity, composition, and mixing length scales in determining its true definition.

cond-mat.mtrl-sci↗
arXiv2022

Diffusion-assisted molecular beam epitaxy of CuCrO$_2$ thin films

Using molecular beam epitaxy (MBE) to grow multi-elemental oxides (MEO) is generally challenging, partly due to difficulty in stoichiometry control. Occasionally, if one of the elements is volatile at the growth temperature, stoichiometry control can be greatly simplified using adsorption-controlled growth mode. Otherwise, stoichiometry control remains one of the main hurdles to achieving high quality MEO film growths. Here, we report another kind of self-limited growth mode, dubbed diffusion-assisted epitaxy, in which excess species diffuses into the substrate and leads to the desired stoichiometry, in a manner similar to the conventional adsorption-controlled epitaxy. Specifically, we demonstrate that using diffusion-assisted epitaxy, high-quality epitaxial CuCrO$_2$ films can be grown over a wide growth window without precise flux control using MBE.

cond-mat.mtrl-sci↗
arXiv2022

Superconducting four-fold Fe(Te,Se) film on six-fold magnetic MnTe via hybrid symmetry epitaxy

Epitaxial Fe(Te,Se) thin films have been grown on various substrates but never been realized on magnetic layers. Here we report the epitaxial growth of four-fold Fe(Te,Se) film on a six-fold antiferromagnetic insulator, MnTe. The Fe(Te,Se)/MnTe heterostructure shows a clear superconducting transition at around 11 K and the critical magnetic field measurement suggests the origin of the superconductivity to be bulk-like. Structural characterizations suggest that the uniaxial lattice match between Fe(Te,Se) and MnTe allows a hybrid symmetry epitaxy mode, which was recently discovered between Fe(Te,Se) and Bi2Te3. Furthermore, Te/Fe flux ratio during deposition of the Fe(Te,Se) layer is found to be critical for its superconductivity. Now that superconducting Fe(Te,Se) can be grown on two related hexagonal platforms, Bi2Te3 and MnTe, this result opens a new possibility of combining topological superconductivity of Fe(Te,Se) with the rich physics in the intrinsic magnetic topological materials (MnTe)n(Bi2Te3)m family.

cond-mat.supr-con↗
arXiv2022

Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Thin Films

Understanding the effects of interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for developing novel technological applications from spintronics to quantum computing. Here, we report that a large electronic and magnetic response is induced in the intrinsic magnetic topological insulator MnBi2Te4 by controlling the propagation of surface oxidation. We show that the formation of the surface oxide layer is confined to the top 1-2 unit cells but drives large changes in the overall magnetic response. Specifically, we observe a dramatic reversal of the sign of the anomalous Hall effect driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi2Te4 on the stoichiometry of the top layers. Our study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.

cond-mat.mtrl-sci↗
arXiv2021

Searching for Superconductivity in High Entropy Oxide Ruddlesden-Popper Cuprate Films

In this work, the high entropy oxide A2CuO4 Ruddlesden-Popper (La0.2Pr0.2Nd0.2Sm0.2Eu0.2)2CuO4 is explored by charge doping with Ce+4 and Sr+2 at concentrations known to induce superconductivity in the simple parent compounds, Nd2CuO4 and La2CuO4. Electron doped (La0.185Pr0.185Nd0.185Sm0.185Eu0.185Ce0.075)2CuO4 and hole doped (La0.18Pr0.18Nd0.18Sm0.18Eu0.18Sr0.1)2CuO4 are synthesized and shown to be single crystal, epitaxially strained, and highly uniform. Transport measurements demonstrate that all as-grown films are insulating regardless of doping. Annealing studies show that resistivity can be tuned by modifying oxygen stoichiometry and inducing metallicity but without superconductivity. These results in turn are connected to extended x-ray absorption fine structure (EXAFS) results indicating that the lack of superconductivity in the high entropy cuprates likely originates from a large distortion within the Cu-O plane (σ2>0.015 Å2) due to A-site cation size variance, which drives localization of charge carriers. These findings describe new opportunities for controlling charge- and orbital-mediated functional responses in Ruddlesden-Popper crystal structures, driven by balancing of cation size and charge variances that may be exploited for functionally important behaviors such as superconductivity, antiferromagnetism, and metal-insulator transitions, while opening less understood phase spaces hosting doped Mott insulators, strange metals, quantum criticality, pseudogaps, and ordered charge density waves.

cond-mat.supr-con↗