arXiv subjects

Alessio Fascista

Publications and source records attributed to Alessio Fascista.

16 recordsLinked to original sources

arXiv2026

Optimal Placement of Movable Antennas for Angle-of-Departure Estimation Under User Location Uncertainty

Movable antennas (MA) have gained significant attention in recent years to overcome the limitations of extremely large antenna arrays in terms of cost and power consumption. In this paper, we investigate the use of MA arrays at the base station (BS) for angle-of-departure (AoD) estimation under uncertainty in the user equipment (UE) location. Specifically, we (i) derive the theoretical performance limits through the Cram\'er-Rao bound (CRB) and (ii) optimize the antenna positions to ensure robust performance within the UE's uncertainty region. Numerical results show that dynamically optimizing antenna placement by explicitly considering the uncertainty region yields superior performance compared to fixed arrays, demonstrating the ability of MA systems to adapt and outperform conventional arrays.

eess.SP↗

arXiv2025

Visible Light Indoor Positioning with a Single LED and Distributed Single-Element OIRS: An Iterative Approach with Adaptive Beam Steering

The integration of Optical Intelligent Reflective Surfaces (OIRSs) into Visible Light Communication (VLC) systems is gaining momentum as a valid alternative to RF technologies, harnessing the existing lighting infrastructures and the vast unlicensed optical spectrum to enable higher spectral efficiency, improved resilience to Line-of-Sight (LoS) blockages, and enhanced positioning capabilities. This paper investigates the problem of localizing a low-cost Photo Detector (PD) in a VLC-based indoor environment consisting of only a single Light Emitting Diode (LED) as an active anchor, and multiple spatially distributed single-element OIRSs. We formulate the problem within an indirect, computationally efficient localization framework: first, the optimal Maximum Likelihood (ML) estimators of the LoS and Non-Line-of-Sight (NLoS) distances are derived, using a suitable OIRS activation strategy to prevent interferences. To overcome the grid-based optimization required by the ML NLoS estimator, we devise a novel algorithm based on an unstructured noise variance transformation, which admits a closed-form solution. The set of estimated LoS/NLoS distances are then used within a low-complexity localization algorithm combining an Iterative Weighted Least Squares (IWLS) procedure, whose weights are set according to the inverse of the Cram\'er-Rao Lower Bound (CRLB), with an adaptive beam steering strategy that allows the OIRSs network to dynamically align with the PD, without any prior knowledge of its position. Accordingly, we derive the CRLB for both LoS/NLoS distance estimation and PD position estimation. Simulation results demonstrate the effectiveness of our approach in terms of localization accuracy, robustness against OIRSs misalignment conditions, and low number of iterations required to attain the theoretical bounds.

eess.SP↗

arXiv2024

Joint Localization, Synchronization and Mapping via Phase-Coherent Distributed Arrays

Extremely large-scale antenna array (ELAA) systems emerge as a promising technology in beyond 5G and 6G wireless networks to support the deployment of distributed architectures. This paper explores the use of ELAAs to enable joint localization, synchronization and mapping in sub-6 GHz uplink channels, capitalizing on the near-field effects of phase-coherent distributed arrays. We focus on a scenario where a single-antenna user equipment (UE) communicates with a network of access points (APs) distributed in an indoor environment, considering both specular reflections from walls and scattering from objects. The UE is assumed to be unsynchronized to the network, while the APs can be time- and phase-synchronized to each other. We formulate the problem of joint estimation of location, clock offset and phase offset of the UE, and the locations of scattering points (SPs) (i.e., mapping). Through comprehensive Fisher information analysis, we assess the impact of bandwidth, AP array size, wall reflections, SPs and phase synchronization on localization accuracy. Furthermore, we derive the maximum-likelihood (ML) estimator, which optimally combines the information collected by all the distributed arrays. To overcome its intractable high dimensionality, we propose a novel three-step algorithm that first estimates phase offset leveraging carrier phase information of line-of-sight (LoS) paths, then determines the UE location and clock offset via LoS paths and wall reflections, and finally locates SPs using a null-space transformation technique. Simulation results demonstrate the effectiveness of our approach in distributed architectures supported by radio stripes (RSs) -- an innovative alternative for implementing ELAAs -- while revealing the benefits of carrier phase exploitation and showcasing the interplay between delay and angular information under different bandwidth regimes.

eess.SP↗

arXiv2023

RIS-Aided Monostatic Sensing and Object Detection with Single and Double Bounce Multipath

We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of the links. Then, we estimate the passive objects using both the double-bounce signals via passive RIS (i.e., RIS-sensing) and the single-bounce multipath direct to the objects (i.e., non-RIS-sensing), based on a mapping filter. Finally, we provide numerical results to demonstrate that effective sensing can be achieved through the proposed framework.

eess.SP↗

arXiv2023

Uplink Joint Positioning and Synchronization in Cell-Free Deployments with Radio Stripes

Radio stripes (RSs) is an emerging technology in beyond 5G and 6G wireless networks to support the deployment of cell-free architectures. In this paper, we investigate the potential use of RSs to enable joint positioning and synchronization in the uplink channel at sub-6 GHz bands. The considered scenario consists of a single-antenna user equipment (UE) that communicates with a network of multiple-antenna RSs distributed over a wide area. The UE is assumed to be unsynchronized to the RSs network, while individual RSs are time- and phase-synchronized. We formulate the problem of joint estimation of position, clock offset, and phase offset of the UE and derive the corresponding maximum-likelihood (ML) estimator, both with and without exploiting carrier phase information. To gain fundamental insights into the achievable performance, we also conduct a Fisher information analysis and inspect the theoretical lower bounds numerically. Simulation results demonstrate that promising positioning and synchronization performance can be obtained in cell-free architectures supported by RSs, revealing at the same time the benefits of carrier phase exploitation through phase-synchronized RSs.

eess.SP↗

arXiv2023

ESPRIT-Oriented Precoder Design for mmWave Channel Estimation

We consider the problem of ESPRIT-oriented precoder design for beamspace angle-of-departure (AoD) estimation in downlink mmWave multiple-input single-output communications. Standard precoders (i.e., directional/sum beams) yield poor performance in AoD estimation, while Cramer-Rao bound-optimized precoders undermine the so-called shift invariance property (SIP) of ESPRIT. To tackle this issue, the problem of designing ESPRIT-oriented precoders is formulated to jointly optimize over the precoding matrix and the SIP-restoring matrix of ESPRIT. We develop an alternating optimization approach that updates these two matrices under unit-modulus constraints for analog beamforming architectures. Simulation results demonstrate the validity of the proposed approach while providing valuable insights on the beampatterns of the ESPRIT-oriented precoders.

eess.SP↗

arXiv2022

Cramér-Rao Bound Analysis of Radars for Extended Vehicular Targets with Known and Unknown Shape

Due to their shorter operating range and large bandwidth, automotive radars can resolve many reflections from their targets of interest, mainly vehicles. This calls for the use of extended-target models in place of simpler and more widely-adopted point-like target models. However, despite some preliminary work, the fundamental connection between the radar's accuracy as a function of the target vehicle state (range, orientation, shape) and radar properties remains largely unknown for extended targets. In this work, we first devise a mathematically tractable analytical model for a vehicle with arbitrary shape, modeled as an extended target parameterized by the center position, the orientation (heading) and the perimeter contour. We show that the derived expressions of the backscatter signal are tractable and correctly capture the effects of the extended-vehicle shape. Analytical derivations of the exact and approximate hybrid Cramér-Rao bounds for the position, orientation and contour are provided, which reveal connections with the case of point-like target and uncover the main dependencies with the received energy, bandwidth, and array size. The theoretical investigation is performed on the two different cases of known and unknown vehicle shape. Insightful simulation results are finally presented to validate the theoretical findings, including an analysis of the diversity effect of multiple radars sensing the extended target.

eess.SP↗

arXiv2022

RIS-aided Joint Localization and Synchronization with a Single-Antenna Receiver: Beamforming Design and Low-Complexity Estimation

Reconfigurable intelligent surfaces (RISs) have attracted enormous interest thanks to their ability to overcome line-of-sight blockages in mmWave systems, enabling in turn accurate localization with minimal infrastructure. Less investigated are however the benefits of exploiting RIS with suitably designed beamforming strategies for optimized localization and synchronization performance. In this paper, a novel low-complexity method for joint localization and synchronization based on an optimized design of the base station (BS) active precoding and RIS passive phase profiles is proposed, for the challenging case of a single-antenna receiver. The theoretical position error bound is first derived and used as metric to jointly optimize the BS-RIS beamforming, assuming a priori knowledge of the user position. By exploiting the low-dimensional structure of the solution, a novel codebook-based robust design strategy with optimized beam power allocation is then proposed, which provides low-complexity while taking into account the uncertainty on the user position. Finally, a reduced-complexity maximum-likelihood based estimation procedure is devised to jointly recover the user position and the synchronization offset. Extensive numerical analysis shows that the proposed joint BS-RIS beamforming scheme provides enhanced localization and synchronization performance compared to existing solutions, with the proposed estimator attaining the theoretical bounds even at low signal-to-noise-ratio and in the presence of additional uncontrollable multipath propagation.

eess.SP↗

arXiv2022

Design of Customized Adaptive Radar Detectors in the CFAR Feature Plane

The paper addresses the design of adaptive radar detectors having desired behavior, in Gaussian disturbance with unknown statistics. Specifically, given detection probability specifications for chosen signal-to-noise ratios and steering vector mismatch levels, a methodology for the optimal design of customized CFAR detectors is devised in a suitable feature plane based on maximal invariant statistics. To overcome the analytical and numerical intractability of the resulting optimization problem, a novel general reduced-complexity algorithm is developed, which is shown to be effective in providing a close approximation of the desired detector. The proposed approach solves the open problem of ensuring a prefixed false alarm probability while controlling the behavior under both matched and mismatched conditions, so enabling the design of fully customized adaptive CFAR detectors.

eess.SP↗

arXiv2020

RIS-aided Joint Localization and Synchronization with a Single-Antenna MmWave Receiver

MmWave multiple-input single-output (MISO) systems using a single-antenna receiver are regarded as promising solution for the near future, before the full-fledged 5G MIMO will be widespread. However, for MISO systems synchronization cannot be performed jointly with user localization unless two-way transmissions are used. In this paper we show that thanks to the use of a reconfigurable intelligent surface (RIS), joint localization and synchronization is possible with only downlink MISO transmissions. The direct maximum likelihood (ML) estimator for the position and clock offset is derived. To obtain a good initialization for the ML optimization, a decoupled, relaxed estimator of position and delays is also devised, which does not require knowledge of the clock offset. Results show that the proposed approach attains the Cramér-Rao lower bound even for moderate values of the system parameters.

eess.SP↗

arXiv2020

Downlink Single-Snapshot Localization and Mapping with a Single-Antenna Receiver

5G mmWave MIMO systems enable accurate estimation of the user position and mapping of the radio environment using a single snapshot when both the base station (BS) and user are equipped with large antenna arrays. However, massive arrays are initially expected only at the BS side, likely leaving users with one or very few antennas. In this paper, we propose a novel method for single-snapshot localization and mapping in the more challenging case of a user equipped with a single-antenna receiver. The joint maximum likelihood (ML) estimation problem is formulated and its solution formally derived. To avoid the burden of a full-dimensional search over the space of the unknown parameters, we present a novel practical approach that exploits the sparsity of mmWave channels to compute an approximate joint ML estimate. A thorough analysis, including the derivation of the Cramér-Rao lower bounds, reveals that accurate localization and mapping can be achieved also in a MISO setup even when the direct line-of-sight path between the BS and the user is severely attenuated.

eess.SP↗

arXiv2019

CFAR Feature Plane: a Novel Framework for the Analysis and Design of Radar Detectors

Since Kelly's pioneering work on GLRT-based adaptive detection, many solutions have been proposed to enhance either selectivity or robustness of radar detectors to mismatched signals. In this paper such a problem is addressed in a different space, called CFAR feature plane and given by a suitable maximal invariant, where observed data are mapped to clusters that can be analytically described. The characterization of the trajectories and shapes of such clusters is provided and exploited for both analysis and design purposes, also shedding new light on the behavior of several well-known detectors. Novel linear and non-linear detectors are proposed with diversified robust or selective behaviors, showing that through the proposed framework it is not only possible to achieve the same performance of well-known receivers obtained by a radically different design approach (namely GLRT), but also to devise detectors with unprecedented behaviors: in particular, our results show that the highest standard of selectivity can be achieved without sacrifying neither detection power under matched conditions nor CFAR property.

eess.SP↗

arXiv2019

A k-nearest neighbors approach to the design of radar detectors

A k-nearest neighbors (KNN) approach to the design of radar detectors is investigated. The idea is to start with either raw data or well-known radar receiver statistics as feature vector to be fed to the KNN decision rule. In the latter case, the probability of false alarm and probability of detection are characterized in closed-form; moreover, it is proved that the detector possesses the constant false alarm rate (CFAR) property and the relevant performance parameters are identified. Simulation examples are provided to illustrate the effectiveness of the proposed approach.

eess.SP↗

arXiv2019

A novel approach to robust radar detection of range-spread targets

This paper proposes a novel approach to robust radar detection of range-spread targets embedded in Gaussian noise with unknown covariance matrix. The idea is to model the useful target echo in each range cell as the sum of a coherent signal plus a random component that makes the signal-plus-noise hypothesis more plausible in presence of mismatches. Moreover, an unknown power of the random components, to be estimated from the observables, is inserted to optimize the performance when the mismatch is absent. The generalized likelihood ratio test (GLRT) for the problem at hand is considered. In addition, a new parametric detector that encompasses the GLRT as a special case is also introduced and assessed. The performance assessment shows the effectiveness of the idea also in comparison to natural competitors.

eess.SP↗

arXiv2019

Mobile Positioning in Multipath Environments: a Pseudo Maximum Likelihood approach

The problem of mobile position estimation in multipath scenarios is addressed. A low-complexity, fully-adaptive algorithm is proposed, based on the pseudo maximum likelihood approach. The processing is done exclusively on-board at the mobile node by exploiting narrowband downlink radio signals. The proposed algorithm is able to estimate via adaptive beamforming (with spatial smoothing) the optimal projection matrices that maximize the likelihood; in addition, it can associate the line-of-sight over the trajectory, hence achieving an integration gain. The performance assessment shows that the proposed algorithm is very effective in (even severe) multipath conditions, outperforming natural competitors also when the number of antennas and snapshots is kept at the theoretical minimum.

eess.SP↗

arXiv2018

Millimeter-Wave Downlink Positioning with a Single-Antenna Receiver

The paper addresses the problem of determining the unknown position of a mobile station for a mmWave MISO system. This setup is motivated by the fact that massive arrays will be initially implemented only on 5G base stations, likely leaving mobile stations with one antenna. The maximum likelihood solution to this problem is devised based on the time of flight and angle of departure of received downlink signals. While positioning in the uplink would rely on angle of arrival, it presents scalability limitations that are avoided in the downlink. To circumvent the multidimensional optimization of the optimal joint estimator, we propose two novel approaches amenable to practical implementation thanks to their reduced complexity. A thorough analysis, which includes the derivation of relevant Cramér-Rao lower bounds, shows that it is possible to achieve quasi-optimal performance even in presence of few transmissions, low SNRs, and multipath propagation effects.

eess.SP↗