SearcharxivSearch

arXiv subjects

Alexander Aryshev

Publications and source records attributed to Alexander Aryshev.

7 recordsLinked to original sources

KEK Accelerator Test Facility Low-Level RF and Timing Systems

The KEK Accelerator Test Facility (ATF) is a dedicated testbed for nanobeam technologies in support of the International Linear Collider (ILC). Stable pulsed operation requires synchronization of the facility timing system with the Low-Level RF (LLRF) system. The timing system distributes trigger and gate signals to key subsystems, including the DAQ, klystrons, laser systems, pulsed kicker magnets, and interlocks. The LLRF system provides phase-coherent RF references and facility-wide clock distribution for synchronization. Achieving ~100 fs-level synchronization depends critically on the phase-noise power spectral density (PN-PSD) of the distributed clock signals and on preserving this performance throughout the distribution network. We present facility-wide measurements of the KEK ATF LLRF clock PN-PSD and discuss the resulting synchronization floor imposed by the stability of the ATF Linac and Damping Ring signal generators.

physics.acc-ph

Study of laser-beam arrival time synchronization towards sub-picosecond stability level

A precise synchronization between laser pulse and electron beam arrival time is essential for achieving sub-picosecond stability in modern accelerator facilities. In this work, a Low-Level RF system architecture combined with White Rabbit based timing system has been tested through a collaboration between KEK (Japan) and CNRS/IN2P3, IJClab (France). The setup combines a frequency standard generator, an IDROGEN carrier board with an embedded White Rabbit node, and SkyWorks synthesizers of different form factors to distribute phase-locked clock signals over telecommunication fiber. Phase noise power spectral density measurements were performed at several RF sub-harmonics to confirm synchronization performance. These results demonstrate the feasibility of implementing the White Rabbit-IDROGEN synchronization scheme for large-scale accelerators, including applications to laser-based diagnostics.

physics.acc-ph

Measurement of Position Resolutions of L-band Cavity Beam Position Monitors

Beam position monitors (BPMs) are indispensable components of modern particle accelerators, providing real-time diagnostics to ensure precise beam control, stability, and quality. As accelerators such as the International Linear Collider (ILC) aim for nanometer-scale beam sizes at the interaction point, stringent requirements on position resolution arise. Specifically, the main linac of the ILC demands a BPM resolution better than 5 {\mu}m to support stable beam transport and minimize emittance growth. To address this, we have developed an L-band cavity BPM optimized for the beam conditions of the ILC. In this paper, we introduce a prototype of an L-band cavity BPM and its signal processing system, describe the methodology for position resolution measurements, discuss the problems and solutions encountered in the past experiment, and report the projected position resolutions of about 300 nm at best.

physics.acc-ph

The International Linear Collider: Report to Snowmass 2021

The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.

physics.acc-ph

High-efficiency broadband THz emission via diffraction-radiation cavity

Accelerator-based terahertz (THz) radiation has been expected to realize a high-power broadband source. Employing a low-emittance and short-bunch electron beam at a high repetition rate, a scheme of coherent diffraction-radiation in an optical cavity layout is proposed. The scheme's stimulated radiation process between bunches can greatly enhance the efficiency of the radiation emission. We performed an experiment with a superconducting linac constructed as an energy recovery linac (ERL) test facility. The electron beam passes through small holes in the cavity mirrors without being destroyed. A sharp THz resonance signal, which indicates broadband stimulated radiation correlated with beam deceleration, was observed while scanning the round-trip length of the cavity. This observation proves the efficient beam-to-radiation energy conversion due to the stimulated radiation process.

physics.acc-ph

Stimulated excitation of an optical cavity by a multi-bunch electron beam via coherent diffraction radiation process

With a low emittance and short-bunch electron beam at a high repetition rate realized by a superconducting linac, stimulated excitation of an optical cavity at the terahertz spectrum range has been shown. The electron beam passed through small holes in the cavity mirrors without being destroyed. A sharp resonance structure which indicated wide-band stimulated emission via coherent diffraction radiation was observed while scanning the round-trip length of the cavity.

physics.acc-ph

Status of the ATF extraction line laser-wire

A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.

physics.acc-ph