arXiv subjects

Alexander Badri-Spröwitz

Publications and source records attributed to Alexander Badri-Spröwitz.

At least 19 recordsLinked to original sources

arXiv2026

Silicone Ethernet (SEth): a Nervous System for Robotic Touch

Fine-grained robotic touch sensing is essential for tasks such as robot-human interaction and the handling of hazardous materials. Yet, the sense of touch of robots is limited by the cost and complexity of routing cables to embedded sensors. This paper tackles this problem by contributing Silicone Ethernet (SEth), a wireless solution for touch sensing, communication and power transfer within a conductive silicone substrate. SEth~\emph{neurons} require no battery and deliver computation, communication, sensing and energy harvesting within a compact package. These neurons are placed into an undifferentiated conductive silicone substrate which may form the entire body of a soft robot, or an outer `skin' for hard robots. Our evaluation shows that SEth achieves data rates of 100\,kbps with sub-$μ$W receive and mW-scale transmit power. Exploiting the unique properties of the conductive silicone substrate, SEth provides prioritized traffic arbitration similar to that found in wired control networks such as CAN. The SEth network inherently supports capacitive touch and presence sensing and neurons can harvest sufficient energy to transmit 10s of messages per second at a range of 1\,m. Considered in sum, these features open new degrees of freedom in touch sensing for soft robots.

cs.NI↗

arXiv2024

Passive knee flexion increases forward impulse of the trailing leg during the step-to-step transition

Human walking efficiency relies on the elastic recoil of the Achilles tendon, facilitated by a "catapult mechanism" that stores energy during stance and releases it during push-off. The catapult release mechanism could include the passive flexion of the knee, as the main part of knee flexion was reported to happen passively after leading leg touch-down. This study is the first to investigate the effects of passive versus active knee flexion initiation, using the bipedal EcoWalker-2 robot with passive ankles. By leveraging the precision of robotic measurements, we aimed to elucidate the importance of timing of gait events and its impact on momentum and kinetic energy changes of the robot. The EcoWalker-2 walked successfully with both initiation methods, maintaining toe clearance. Passive knee flexion initiation resulted in a 3% of the gait cycle later onset of ankle plantar flexion, leading to 87% larger increase in the trailing leg horizontal momentum, and 188% larger magnitude increase in the center of mass momentum vector during the step-to-step transition. Our findings highlight the role of knee flexion in the release of the catapult, and timing of gait events, providing insights into human-like walking mechanics and potential applications in rehabilitation, orthosis, and prosthesis development.

cs.RO↗

arXiv2024

Bird-inspired tendon coupling improves paddling efficiency by shortening phase transition times

Drag-based swimming with rowing appendages, fins, and webbed feet is a widely adapted locomotion form in aquatic animals. To develop effective underwater and swimming vehicles, a wide range of bioinspired drag-based paddles have been proposed, often faced with a trade-off between propulsive efficiency and versatility. Webbed feet provide an effective propulsive force in the power phase, are light weight and robust, and can even be partially folded away in the recovery phase. However, during the transition between recovery and power phase, much time is lost folding and unfolding, leading to drag and reducing efficiency. In this work, we took inspiration from the coupling tendons of aquatic birds and utilized tendon coupling mechanisms to shorten the transition time between recovery and power phase. Results from our hardware experiments show that the proposed mechanisms improve propulsive efficiency by 2.0 and 2.4 times compared to a design without extensor tendons or based on passive paddle, respectively. We further report that distal leg joint clutching, which has been shown to improve efficiency in terrestrial walking, did not play an major role in swimming locomotion. In sum, we describe a new principle for an efficient, drag-based leg and paddle design, with potential relevance for the swimming mechanics in aquatic birds.

cs.RO↗

arXiv2023

Biophysical Simulation Reveals the Mechanics of the Avian Lumbosacral Organ

The lumbosacral organ (LSO) is a lumbosacral spinal canal morphology that is universally and uniquely found in birds. Recent studies suggested an intraspinal mechanosensor function that relies on the compliant motion of soft tissue in the spinal cord fluid. It has not yet been possible to observe LSO soft tissue motion in vivo due to limitations of imaging technologies. As an alternative approach, we developed an artificial biophysical model of the LSO, and characterize the dynamic responses of this model when entrained by external motion. The parametric model incorporates morphological and material properties of the LSO. We varied the model's parameters to study the influence of individual features on the system response. We characterized the system in a locomotion simulator, producing vertical oscillations similar to the trunk motions. We show how morphological and material properties effectively shape the system's oscillation characteristics. We conclude that external oscillations could entrain the soft tissue of the intraspinal lumbosacral organ during locomotion, consistent with recently proposed sensing mechanisms.

q-bio.TO↗

arXiv2023

Upside down: affordable high-performance motion platform

Parallel robots are capable of high-speed manipulation and have become essential tools in the industry. The proximal placement of their motors and the low weight of their end effectors make them ideal for generating highly dynamic motion. Therefore, parallel robots can be adopted for motion platform designs, as long as end effector loads are low. Traditional motion platforms can be large and powerful to generate multiple g acceleration. However, these designs tend to be expensive and large. Similar but smaller motion platforms feature a small work range with reduced degrees of freedom (DoFs) and a limited payload. Here we seek a medium-sized affordable parallel robot capable of powerful and high-speed 6-DoF motion in a comparably large workspace. This work explores the concept of a quadruped robot flipped upside-down, with the motion platform fixed between its feet. In particular, we exploit the high-power dynamic brushless actuation and the four-leg redundancy when moving the motion platform. We characterize the resulting motion platform by tracking sinusoidal and circular trajectories with varying loads. Dynamic motions in 6 DoFs up to 10 Hz and ~10 mm amplitude are possible when moving a mass of 300 grams. We demonstrate single-axis end-effector translations up to ~20 mm at 10 Hz for higher loads of 1.2 kg. The motion platform can be replicated easily by 3D printing and off-the-shelf components. All motion platform-related hardware and the custom-written software required to replicate are open-source.

cs.RO↗

arXiv2023

An Open-Source Modular Treadmill for Dynamic Force Measurement with Load Dependant Range Adjustment

Ground reaction force sensing is one of the key components of gait analysis in legged locomotion research. To measure continuous force data during locomotion, we present a novel compound instrumented treadmill design. The treadmill is 1.7m long, with a natural frequency of 170Hz and an adjustable range that can be used for humans and small robots alike. Here, we present the treadmill's design methodology and characterize it in its natural frequency, noise behavior and real-life performance. Additionally, we apply an ISO 376 norm conform calibration procedure for all spatial force directions and center of pressure position. We achieve a force accuracy of $\leq$5.6N for the ground reaction forces and $\leq$13mm in center of pressure position.

cs.RO↗

arXiv2023

Multi-segmented Adaptive Feet for Versatile Legged Locomotion in Natural Terrain

Most legged robots are built with leg structures from serially mounted links and actuators and are controlled through complex controllers and sensor feedback. In comparison, animals developed multi-segment legs, mechanical coupling between joints, and multi-segmented feet. They run agile over all terrains, arguably with simpler locomotion control. Here we focus on developing foot mechanisms that resist slipping and sinking also in natural terrain. We present first results of multi-segment feet mounted to a bird-inspired robot leg with multi-joint mechanical tendon coupling. Our one- and two-segment, mechanically adaptive feet show increased viable horizontal forces on multiple soft and hard substrates before starting to slip. We also observe that segmented feet reduce sinking on soft substrates compared to ball-feet and cylinder-feet. We report how multi-segmented feet provide a large range of viable centre of pressure points well suited for bipedal robots, but also for quadruped robots on slopes and natural terrain. Our results also offer a functional understanding of segmented feet in animals like ratite birds.

cs.RO↗

arXiv2022

Slack-based tunable damping leads to a trade-off between robustness and efficiency in legged locomotion

Animals run robustly in diverse terrain. This locomotion robustness is puzzling because axon conduction velocity is limited to a few ten meters per second. If reflex loops deliver sensory information with significant delays, one would expect a destabilizing effect on sensorimotor control. Hence, an alternative explanation describes a hierarchical structure of low-level adaptive mechanics and high-level sensorimotor control to help mitigate the effects of transmission delays. Motivated by the concept of an adaptive mechanism triggering an immediate response, we developed a tunable physical damper system. Our mechanism combines a tendon with adjustable slackness connected to a physical damper. The slack damper allows adjustment of damping force, onset timing, effective stroke, and energy dissipation. We characterize the slack damper mechanism mounted to a legged robot controlled in open-loop mode. The robot hops vertically and planar over varying terrains and perturbations. During forward hopping, slack-based damping improves faster perturbation recovery (up to 170%) at higher energetic cost (27%). The tunable slack mechanism auto-engages the damper during perturbations, leading to a perturbation-trigger damping, improving robustness at minimum energetic cost. With the results from the slack damper mechanism, we propose a new functional interpretation of animals' redundant muscle tendons as tunable dampers.

cs.RO↗

arXiv2022

Gastrocnemius and Power Amplifier Soleus Spring-Tendons Achieve Fast Human-like Walking in a Bipedal Robot

Legged locomotion in humans is governed by natural dynamics of the human body and neural control. One mechanism that is assumed to contribute to the high efficiency of human walking is the impulsive ankle push-off, which potentially powers the swing leg catapult. However, the mechanics of the human lower leg with its complex muscle-tendon units spanning over single and multiple joints is not yet understood. Legged robots allow testing the interaction between complex leg mechanics, control, and environment in real-world walking gait. We developed a 0.49m tall, 2.2kg anthropomorphic bipedal robot with Soleus and Gastrocnemius muscle-tendon units represented by linear springs, acting as mono- and biarticular elastic structures around the robot's ankle and knee joints. We tested the influence of three Soleus and Gastrocnemius spring-tendon configurations on the ankle power curves, the coordination of the ankle and knee joint movements, the total cost of transport, and walking speed. We controlled the robot with a feed-forward central pattern generator, leading to walking speeds between 0.35m/s and 0.57m/s at 1.0Hz locomotion frequency, at 0.35m leg length. We found differences between all three configurations; the Soleus spring-tendon modulates the robot's speed and energy efficiency likely by ankle power amplification, while the Gastrocnemius spring-tendon changes the movement coordination between ankle and knee joints during push-off.

cs.RO↗

arXiv2022

Diaphragm Ankle Actuation for Efficient Series Elastic Legged Robot Hopping

Robots need lightweight legs for agile locomotion, and intrinsic series elastic compliance has proven to be a major ingredient for energy-efficient locomotion and robust locomotion control. Animals' anatomy and locomotion capabilities emphasize the importance of that lightweight legs and integrated, compact, series elastically actuated for distal leg joints. But unlike robots, animals achieve series elastic actuation by their muscle-tendon units. So far no designs are available that feature all characteristics of a perfect distal legged locomotion actuator; a low-weight and low-inertia design, with high mechanical efficiency, no stick and sliding friction, low mechanical complexity, high-power output while being easy to mount. Ideally, such an actuator can be controlled directly and without mechanical cross-coupling, for example remotely. With this goal in mind, we propose a low-friction, lightweight Series ELastic Diaphragm distal Actuator (SELDA) which meets many, although not all, of the above requirements. We develop, implement, and characterize a bioinspired robot leg that features a SELDA-actuated foot segment. We compare two leg configurations controlled by a central pattern generator that both feature agile forward hopping. By tuning SELDA's activation timing, we effectively adjust the robot's hopping height by 11% and its forward velocity by 14%, even with comparatively low power injection to the distal joint.

cs.RO↗

arXiv2022

Muscle pre-stimulation tunes viscous-like perturbation rejection in legged hopping

Muscle fibres possess unique visco-elastic properties, capable of generating a stabilising zero-delay response to unexpected perturbations. This instantaneous response -- termed "preflex" -- is crucial in the presence of neuro-transmission delays, which are particularly hazardous during fast locomotion due to the short stance duration. While the elastic contribution to preflexes has been studied extensively, research on the role of fibre viscosity due to the force-velocity relation remains unexplored. Moreover, muscle models predict conditions with saturated force-velocity relations resulting in reduced viscous-like fibre engagement. The goal of our study is to isolate and quantify the preflex force produced by the force-velocity relation. We use our approach to analyse two perturbed vertical hopping conditions, differing in their viscosity engagement at touch-down. Both cases showed stable hopping patterns despite the reduced viscous-like response to ground perturbations in the saturated case. Moreover, the force-velocity relation was not the predominant factor driving energy adjustment to disturbance intensity. From a robotics perspective, our results suggest that already a simple, constant damper mounted in parallel to an actuator could provide stabilising preflexes at and shortly after impact.

physics.bio-ph↗

arXiv2021

Hybrid leg compliance enables robots to operate with sensorimotor delays and low control update frequencies

Animals locomote robustly and agile, albeit significant sensorimotor delays of their nervous system. The sensorimotor control of legged robots is implemented with much higher frequencies-often in the kilohertz range-and sensor and actuator delays in the low millisecond range. But especially at harsh impacts with unknown touch-down timing, legged robots show unstable controller behaviors, while animals are seemingly not impacted. Here we examine this discrepancy and suggest a hybrid robotic leg and controller design. We implemented a physical, parallel joint compliance dimensioned in combination with an active, virtual leg length controller. We present an extensive set of systematic experiments both in computer simulation and hardware. Our hybrid leg and controller design shows previously unseen robustness, in the presence of sensorimotor delays up to 60 ms, or control frequencies as low as 20 Hz, for a drop landing task from 1.3 leg lengths high and with a passive compliance ratio of 0.7. In computer simulations, we report successful drop-landings of the hybrid compliant leg from 3.8 leg lengths (1.2 m) for a 2 kg quadruped robot with 100 Hz control frequency and a sensorimotor delay of 35 ms. The results of our presented hybrid leg design and control provide a further explanation for the performance robustness of animals, and the resulting discrepancy between animals and legged robots.

cs.RO↗

arXiv2020

A Control Method to Compensate Ground Level Changes for Running Bipedal Robots

Bipedal running is a difficult task to realize in robots, since the trunk is underactuated and control is limited by intermittent ground contacts. Stabilizing the trunk becomes even more challenging if the terrain is uneven and causes perturbations. One bio-inspired method to achieve postural stability is the virtual point (VP) control, which is able to generate natural motion. However, so far it has only been studied for level running. In this work, we investigate whether the VP control method can accommodate single step-downs and downhill terrains. We provide guidelines on the model and controller parameterizations for handling varying terrain conditions. Next, we show that the VP method is able to stabilize single step-down perturbations up to 40 cm, and downhill grades up to 20-10° corresponding to running speeds of 2-5m/s. Our results suggest that VP control is a promising candidate for terrain-adaptive running control of bipedal robots.

cs.RO↗

arXiv2020

Effective Viscous Damping Enables Morphological Computation in Legged Locomotion

Muscle models and animal observations suggest that physical damping is beneficial for stabilization. Still, only a few implementations of mechanical damping exist in compliant robotic legged locomotion. It remains unclear how physical damping can be exploited for locomotion tasks, while its advantages as sensor-free, adaptive force- and negative work-producing actuators are promising. In a simplified numerical leg model, we studied the energy dissipation from viscous and Coulomb damping during vertical drops with ground-level perturbations. A parallel spring-damper is engaged between touch-down and mid-stance, and its damper auto-disengages during mid-stance and takeoff. Our simulations indicate that an adjustable and viscous damper is desired. In hardware we explored effective viscous damping and adjustability and quantified the dissipated energy. We tested two mechanical, leg-mounted damping mechanisms; a commercial hydraulic damper, and a custom-made pneumatic damper. The pneumatic damper exploits a rolling diaphragm with an adjustable orifice, minimizing Coulomb damping effects while permitting adjustable resistance. Experimental results show that the leg-mounted, hydraulic damper exhibits the most effective viscous damping. Adjusting the orifice setting did not result in substantial changes of dissipated energy per drop, unlike adjusting damping parameters in the numerical model. Consequently, we also emphasize the importance of characterizing physical dampers during real legged impacts to evaluate their effectiveness for compliant legged locomotion.

cs.RO↗

arXiv2020

FootTile: a Rugged Foot Sensor for Force and Center of Pressure Sensing in Soft Terrain

In this paper we present FootTile, a foot sensor for reaction force and center of pressure sensing in challenging terrain. We compare our sensor design to standard biomechanical devices, force plates and pressure plates. We show that FootTile can accurately estimate force and pressure distribution during legged locomotion. FootTile weighs 0.9g, has a sampling rate of 330Hz, a footprint of 10 by 10mm and can easily be adapted in sensor range to the required load case. In three experiments we validate: first the performance of the individual sensor, second an array of FootTiles for center of pressure sensing and third the ground reaction force estimation during locomotion in granular substrate. We then go on to show the accurate sensing capabilities of the waterproof sensor in liquid mud, as a showcase for real world rough terrain use.

cs.RO↗

arXiv2020

Postural Stability in Human Running with Step-down Perturbations: An Experimental and Numerical Study

Postural stability is one of the most crucial elements in bipedal locomotion. Bipeds are dynamically unstable and need to maintain their trunk upright against the rotations induced by the ground reaction forces (GRFs), especially when running. Gait studies report that the GRF vectors focus around a virtual point above the center of mass (VPA), while the trunk moves forward in pitch axis during the stance phase of human running. However, a recent simulation study suggests that a virtual point below the center of mass (VPB) might be present in human running, since a VPA yields backward trunk rotation during the stance phase. In this work, we perform a gait analysis to investigate the existence and location of the VP in human running at 5 ms-1, and support our findings numerically using the spring-loaded inverted pendulum model with a trunk (TSLIP). We extend our analysis to include perturbations in terrain height (visible and camouflaged), and investigate the response of the VP mechanism to step-down perturbations both experimentally and numerically. Our experimental results show that the human running gait displays a VPB of ~-30cm and a forward trunk motion during the stance phase. The camouflaged step-down perturbations affect the location of the VPB. Our simulation results suggest that the VPB is able to encounter the step-down perturbations and bring the system back to its initial equilibrium state.

cs.RO↗

arXiv2020

An Open Torque-Controlled Modular Robot Architecture for Legged Locomotion Research

We present a new open-source torque-controlled legged robot system, with a low-cost and low-complexity actuator module at its core. It consists of a high-torque brushless DC motor and a low-gear-ratio transmission suitable for impedance and force control. We also present a novel foot contact sensor suitable for legged locomotion with hard impacts. A 2.2 kg quadruped robot with a large range of motion is assembled from eight identical actuator modules and four lower legs with foot contact sensors. Leveraging standard plastic 3D printing and off-the-shelf parts results in a lightweight and inexpensive robot, allowing for rapid distribution and duplication within the research community. We systematically characterize the achieved impedance at the foot in both static and dynamic scenarios, and measure a maximum dimensionless leg stiffness of 10.8 without active damping, which is comparable to the leg stiffness of a running human. Finally, to demonstrate the capabilities of the quadruped, we present a novel controller which combines feedforward contact forces computed from a kino-dynamic optimizer with impedance control of the center of mass and base orientation. The controller can regulate complex motions while being robust to environmental uncertainty.

cs.RO↗

arXiv2020

Trunk Pitch Oscillations for Energy Trade-offs in Bipedal Running Birds and Robots

Bipedal animals have diverse morphologies and advanced locomotion abilities. Terrestrial birds, in particular, display agile, efficient, and robust running motion, in which they exploit the interplay between the body segment masses and moment of inertias. On the other hand, most legged robots are not able to generate such versatile and energy-efficient motion and often disregard trunk movements as a means to enhance their locomotion capabilities. Recent research investigated how trunk motions affect the gait characteristics of humans, but there is a lack of analysis across different bipedal morphologies. To address this issue, we analyze avian running based on a spring-loaded inverted pendulum model with a pronograde (horizontal) trunk. We use a virtual point based control scheme and modify the alignment of the ground reaction forces to assess how our control strategy influences the trunk pitch oscillations and energetics of the locomotion. We derive three potential key strategies to leverage trunk pitch motions that minimize either the energy fluctuations of the center of mass or the work performed by the hip and leg. We suggest how these strategies could be used in legged robotics.

cs.RO↗