arXiv subjects

Alexander Ihlow

Publications and source records attributed to Alexander Ihlow.

8 recordsLinked to original sources

arXiv2026

A Road-Mobile GNSS-Disciplined Oscillator for Accurate Synchronization of Vehicular Microwave Measurements

Precise synchronization is essential in various technical disciplines, being especially challenging in mobile scenarios. Unfortunately, state-of-the-art global navigation satellite system (GNSS) disciplined oscillators (GNSSDOs) are designed and optimized for stationary operation. We present a novel solution that is optimized for mobile use from the ground up. The centerpiece is a precise oven-controlled crystal oscillator (OCXO) that is optimized for low sensitivity to dynamic accelerations. A state-of-the-art GNSS timing module is used to discipline it. We evaluate the system by comparing it with state-of-the-art test equipment in a real-world test drive through diverse environments. After compensating for the stationary offset, the state-of-the-art devices deviated by up to 2315 ns, while with our devices, the deviation never exceeded 22.6 ns. It is evident that the devices designed for laboratory use perform inadequately in mobile operation and that our novel solution enables a significant leap in accuracy.

eess.SY↗

arXiv2026

Background Subtraction with Drift Correction for Bistatic Radar Reflectivity Measurements

Fundamental research on bistatic radar reflectivity is highly relevant, e.g., to the upcoming mobile communication standard 6G, which includes integrated sensing and communication (ISAC). We introduce a model for correcting instrumentation drift during bistatic radar measurements in anechoic chambers. Usually, background subtraction is applied with the goal to yield the target reflection signal as best as possible while coherently subtracting all signals which were present in both the foreground and background measurement. However, even slight incoherences between the foreground and background measurement process deteriorate the result. We analyze these effects in real measurements in the frequency range 2-18 GHz, taken with the Bistatic Radar (BIRA) measurement facility at TU Ilmenau. Applying our proposed drift correction model, we demonstrate up to 40 dB improvement for the removal of direct line-of-sight antenna crosstalk over the state of the art.

eess.SP↗

arXiv2025

Wideband Antenna Deconvolution for Bistatic Millimeter Wave Radar Reflectivity Measurements

Bistatic radar measurements offer unique spatial diversity and enhanced target characterization capabilities, rendering them increasingly vital for contemporary sensing application research. The reliability of such measurements is contingent upon precise system and antenna calibration. The prevailing technique is the substitution method, which involves the use of known reference objects. We propose an over-the-air calibration algorithm for spherical bistatic measurement systems. Our method is both significantly simpler and twice as fast as existing algorithms. The application of our technique to reflectivity measurements of a metal sphere from 76 to 81 GHz demonstrates a dynamic range enhancement of up to 40 dB when compared with uncalibrated data. A comparison with simulation data demonstrates a high degree of agreement between measurement and simulation.

eess.SP↗

arXiv2024

BIRA: A Spherical Bistatic Radar Reflectivity Measurement System

The upcoming 6G mobile communication standard will offer a revolutionary new feature: Integrated sensing and communication (ISAC) reuses mobile communication signals to realize multi-static radar for various applications including localization. Consequently, applied ISAC propagation research necessitates to evolve from classical monostatic radar cross section (RCS) measurement of static targets on to bistatic radar reflectivity characterization of dynamic objects. Here, we introduce our Bistatic Radar (BIRA) measurement facility for independent spherical positioning of two probes with sub-millimeter accuracy on a diameter of up to 7 m and with almost continuous frequency coverage from 0.7 up to 260 GHz. Currently, BIRA is the only bistatic measurement facility capable of unrestricted ISAC research: In addition to vector network analysis, it employs advanced wideband transceiver technology with an instantaneous bandwidth of up to 4 GHz. These transceivers grant BIRA the unique capability to characterize dynamic targets in both Doppler and range, while also significantly accelerating measurements on static objects. Additionally, the installation is capable of spherical near-field antenna measurements over these wide frequency ranges.

eess.SP↗

arXiv2024

Accelerating Innovation in 6G Research: Real-Time Capable SDR System Architecture for Rapid Prototyping

The upcoming 3GPP global mobile communication standard 6G strives to push the technological limits of radio frequency (RF) communication even further than its predecessors: Sum data rates beyond 100 Gbit/s, RF bandwidths above 1 GHz per link, and sub-millisecond latency necessitate very high performance development tools. We propose a new SDR firmware and software architecture designed explicitly to meet these challenging requirements. It relies on Ethernet and commercial off-the-shelf network and server components to maximize flexibility and to reduce costs. We analyze state-of-the-art solutions (USRP X440 and other RFSoC-based systems), derive architectural design goals, explain resulting design decision in detail, and exemplify our architecture's implementation on the XCZU48DR RFSoC. Finally, we validate its performance via measurements and outline how the architecture surpasses the state-of-the-art with respect to sustained RF recording, while maintaining high Ethernet bandwidth efficiency. Building a 6G integrated sensing and communication (ISAC) example, we demonstrate its real-time and rapid application development capabilities.

eess.SP↗

arXiv2022

Receiver Bandwidth Extension Beyond Nyquist Using Channel Bonding

Current and upcoming communication and sensing technologies require ever larger bandwidths. Channel bonding can be utilized to extend a receiver's instantaneous bandwidth beyond a single converter's Nyquist limit. Two potential joint front-end and converter design approaches are theoretically introduced, realized and evaluated in this paper. The Xilinx RFSoC platform with its 5 GSa/s analog to digital converters (ADCs) is used to implement both a hybrid coupler based in-phase/quadrature (I/Q) sampling and a time-interleaved sampling approach along with channel bonding. Both realizations are demonstrated to be able to reconstruct instantaneous bandwidths of 5 GHz with up to 49 dB image rejection ratio (IRR) typically within 4 to 8 dB the front-ends' theoretical limits.

eess.SP↗

arXiv2022

Low-Latency Analog-to-Analog Signal Processing using PC Hardware and USRPs

In this paper, we implement a low-latency rapid-prototyping platform for signal processing based on software-defined radios (SDRs) and off-the-shelf PC hardware. This platform allows to evaluate a wide variety of algorithms in real-time environments, supporting new developments in the fields of classical, AI-based, and hybrid signal processing. To accomplish this, the streaming protocol of the used USRP X310 devices is implemented using the Data Plane Development Kit (DPDK), which allows to handle network communication in userspace only. This bypasses the kernel and thus avoids the latencies caused by interrupt handling, scheduling, and context switches. It allows signal processing to be performed on isolated processor cores that are protected from interrupts to a great extent. To validate our approach, linear time-invariant channel emulation has been implemented. For this, an analog-to-analog latency of 31 microseconds was achieved, demonstrating that our PC-based approach enables the implementation of rapid-prototyping systems with low latency.

eess.SP↗

arXiv2018

High-Precision Measurement of Sine and Pulse Reference Signals using Software-Defined Radio

This paper addresses simultaneous, high-precision measurement and analysis of generic reference signals by using inexpensive commercial off-the-shelf Software Defined Radio hardware. Sine reference signals are digitally down-converted to baseband for the analysis of phase deviations. Hereby, we compare the precision of the fixed-point hardware Digital Signal Processing chain with a custom Single Instruction Multiple Data (SIMD) x86 floating-point implementation. Pulse reference signals are analyzed by a software trigger that precisely locates the time where the slope passes a certain threshold. The measurement system is implemented and verified using the Universal Software Radio Peripheral (USRP) N210 by Ettus Research LLC. Applying standard 10 MHz and 1 PPS reference signals for testing, a measurement precision (standard deviation) of 0.36 ps and 16.6 ps is obtained, respectively. In connection with standard PC hardware, the system allows long-term acquisition and storage of measurement data over several weeks. A comparison is given to the Dual Mixer Time Difference (DMTD) and Time Interval Counter (TIC), which are state-of-the-art measurement methods for sine and pulse signal analysis, respectively. Furthermore, we show that our proposed USRP-based approach outperforms measurements with a high-grade Digital Sampling Oscilloscope.

eess.SP↗