arXiv subjects

Alexander J. White

Publications and source records attributed to Alexander J. White.

13 recordsLinked to original sources

arXiv2026

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗

arXiv2025

Mixed Stochastic-Deterministic Density Functional Theoretic Decomposition of Kubo-Greenwood Conductivities in the Projector Augmented Wave Formalism

Pairing the accuracy of Kohn-Sham density-functional framework with the efficiency of a stochastic algorithmic approach, mixed stochastic-deterministic Density Functional Theory (mDFT) achieves a favorable computational scaling with system sizes and electronic temperatures. We employ the recently developed mDFT formalism to investigate the dynamic charge-transport properties of systems in the warm dense matter regime. The optical conductivity spectra are computed for single- and multi- component mixtures of carbon, hydrogen, and beryllium using two complementary approaches: Kubo-Greenwood in the mDFT picture and real-time Time-Dependent mDFT. We further devise a decomposition of the Onsager coefficients leading up to the Kubo-Greenwood spectra to exhibit contributions from the deterministic, stochastic, and mixed electronic state transitions at different incident photon energies.

physics.chem-ph↗

arXiv2025

Group Conductivity and Nonadiabatic Born Effective Charges of Disordered Metals, Warm Dense Matter, and Hot Dense Plasma

The average ionization state is a critical parameter in plasma models for charged particle transport, equation of state, and optical response. The dynamical or nonadiabatic Born effective charge (NBEC), calculated via first principles time-dependent density functional theory, provides exact ionic partitioning of bulk electron response for both metallic and insulating materials. The NBEC can be trivially transformed into a ''group conductivity," that is, the electron conductivity ascribed to a subset of ions. We show that for disordered metallic systems, such as warm dense matter (WDM) and hot dense plasma, the static limit of the NBEC is different from the average ionization state, but that the ionization state can be extracted from the group conductivity even in mixed systems. We demonstrate this approach using a set of archetypical examples, including cold and warm aluminium, low- and high- density WDM carbon, and a WDM carbon-beryllium-hydrogen mixture.

cond-mat.mtrl-sci↗

arXiv2024

Dynamical structure factors of Warm Dense Matter from Time-Dependent Orbital-Free and Mixed-Stochastic-Deterministic Density Functional Theory

We present the first calculations of the inelastic part of the dynamical structure factor (DSF) for warm dense matter (WDM) using Time-Dependent Orbital-Free Density Functional Theory (TD-OF-DFT) and Mixed-Stochastic-Deterministic (mixed) Kohn Sham TD-DFT (KS TD-DFT). WDM is an intermediate phase of matter found in planetary cores and laser-driven experiments, where the accurate calculation of the DSF is critical for interpreting X-ray Thomson scattering (XRTS) measurements. Traditional TD-DFT methods, while highly accurate, are computationally expensive, motivating the exploration of TD-OF-DFT and mixed TD-KS-DFT as more efficient alternatives. We applied these methods to experimentally measured WDM systems, including solid-density aluminum and beryllium, compressed beryllium, and carbon-hydrogen mixtures. Our results show that TD-OF-DFT requires a dynamical kinetic energy potential in order to qualitatively capture the plasmon response. Additionally, it struggles with capturing bound electron contributions and accurately modeling plasmon dynamics without the inclusion of a dynamic kinetic energy potential. In contrast, mixed TD-KS-DFT offers greater accuracy in distinguishing bound and free electron effects, aligning well with experimental data, though at a higher computational cost. This study highlights the trade-offs between computational efficiency and accuracy, demonstrating that TD-OF-DFT remains a valuable tool for rapid scans of parameter space, while mixed TD-KS-DFT should be preferred for high-fidelity simulations. Our findings provide insight into the future development of DFT methods for WDM and suggest potential improvements for TD-OF-DFT.

physics.plasm-ph↗

arXiv2024

Optical and Transport Properties of Plasma Mixtures from Ab Initio Molecular Dynamics

Predicting the charged particle transport properties of warm dense matter / hot dense plasma mixtures is a challenge for analytical models. High accuracy ab initio methods are more computationally expensive, but can provide critical insight by explicitly simulating mixtures. In this work, we investigate the transport properties and optical response of warm dense carbon-hydrogen mixtures at varying concentrations under either conserved electronic pressure or mass density at a constant temperature. We compare options for mixing the calculated pure species properties to estimate the results of the mixtures. We find that a combination of the Drude model with the Matthiessen's rule works well for DC electron transport and low frequency optical response. This breaks down at higher frequencies, where a volumetric mix of pure-species AC conductivities works better.

physics.plasm-ph↗

arXiv2024

Reproducibility of real-time time-dependent density functional theory calculations of electronic stopping power in warm dense matter

Real-time time-dependent density functional theory (TDDFT) is widely considered to be the most accurate available method for calculating electronic stopping powers from first principles, but there have been relatively few assessments of the consistency of its predictions across different implementations. This problem is particularly acute in the warm dense regime, where computational costs are high and experimental validation is rare and resource intensive. We report a comprehensive cross-verification of stopping power calculations in conditions relevant to inertial confinement fusion conducted using four different TDDFT implementations. We find excellent agreement among both the post-processed stopping powers and relevant time-resolved quantities for alpha particles in warm dense hydrogen. We also analyze sensitivities to a wide range of methodological details, including the exchange-correlation model, pseudopotentials, initial conditions, observable from which the stopping power is extracted, averaging procedures, projectile trajectory, and finite-size effects. We show that among these details, pseudopotentials, trajectory-dependence, and finite-size effects have the strongest influence, and we discuss different strategies for controlling the latter two considerations.

physics.comp-ph↗

arXiv2023

Stochastic and Mixed Density Functional Theory within the projector augmented wave formalism for the simulation of warm dense matter

Stochastic and mixed stochastic-deterministic density functional theory (DFT) are promising new approaches for the calculation of the equation-of-state and transport properties in materials under extreme conditions. In the intermediate warm dense matter regime, a state between correlated condensed matter and kinetic plasma, electrons can range from being highly localized around nuclei to delocalized over the whole simulation cell. The plane-wave basis pseudo-potential approach is thus the typical tool of choice for modeling such systems at the DFT level. Unfortunately, the stochastic DFT methods scale as the square of the maximum plane-wave energy in this basis. To reduce the effect of this scaling, and improve the overall description of the electrons within the pseudo-potential approximation, we present stochastic and mixed DFT developed and implemented within the projector augmented wave formalism. We compare results between the different DFT approaches for both single-point and molecular dynamics trajectories and present calculations of self-diffusion coefficients of solid density carbon from 1 to 50 eV.

physics.comp-ph↗

arXiv2021

Mixed Stochastic-Deterministic Time-Dependent Density Functional Theory: Application to Stopping Power of Warm Dense Carbon

Warm dense matter (WMD) describes an intermediate phase, between condensed matter and classical plasmas, found in natural and man-made systems. In a laboratory setting, WDM needs to be created dynamically. It is typically laser or pulse-power generated and can be difficult to characterize experimentally. Measuring the energy loss of high energy ions, caused by a WDM target, is both a promising diagnostic and of fundamental importance to inertial confinement fusion research. However, electron coupling, degeneracy, and quantum effects limit the accuracy of easily calculable kinetic models for stopping power, while high temperatures make the traditional tools of condensed matter, e.g. Time-Dependent Density Functional Theory (TD-DFT), often intractable. We have developed a mixed stochastic-deterministic approach to TD-DFT which provides more efficient computation while maintaining the required precision for model discrimination. Recently, this approach showed significant improvement compared to models when compared to experimental energy loss measurements in WDM carbon. Here, we describe this approach and demonstrate its application to warm dense carbon stopping acr

physics.plasm-ph↗

arXiv2020

Fast and Universal Kohn Sham Density Functional Theory Algorithm for Warm Dense Matter to Hot Dense Plasma

Understanding many processes, e.g. fusion experiments, planetary interiors and dwarf stars, depends strongly on microscopic physics modeling of warm dense matter (WDM) and hot dense plasma. This complex state of matter consists of a transient mixture of degenerate and nearly-free electrons, molecules, and ions. This regime challenges both experiment and analytical modeling, necessitating predictive \emph{ab initio} atomistic computation, typically based on quantum mechanical Kohn-Sham Density Functional Theory (KS-DFT). However, cubic computational scaling with temperature and system size prohibits the use of DFT through much of the WDM regime. A recently-developed stochastic approach to KS-DFT can be used at high temperatures, with the exact same accuracy as the deterministic approach, but the stochastic error can converge slowly and it remains expensive for intermediate temperatures (<50 eV). We have developed a universal mixed stochastic-deterministic algorithm for DFT at any temperature. This approach leverages the physics of KS-DFT to seamlessly integrate the best aspects of these different approaches. We demonstrate that this method significantly accelerated self-consistent field calculations for temperatures from 3 to 50 eV, while producing stable molecular dynamics and accurate diffusion coefficients.

physics.comp-ph↗

arXiv2020

Static and dynamic properties of multi-ionic plasma mixtures

Complex plasma mixtures with three or more components are often encountered in astrophysics or in inertial confinement fusion (ICF) experiments. For mixtures containing species with large differences in atomic number Z, the modeling needs to consider at the same time the kinetic theory for low-Z elements combined with the theory of strongly coupled plasma for high-Z elements, as well as all the intermediate situations that can appear in multi-component systems. For such cases, we study the pair distribution functions, self-diffusions, mutual diffusion and viscosity for ternary mixtures at extreme conditions. These quantities can be produced from first principles using orbital free molecular dynamics at the computational expense of very intensive simulations to reach good statistics. Utilizing the first-principles results as reference data, we assess the merit of a global analytic model for transport coefficients, Pseudo-Ions in Jellium (PIJ), based on an iso-electronic assumption ( iso-n e ). With a multi-component hypernetted-chain integral equation, we verify the quality of the iso-n e prescription for describing the static structure of the mixtures. This semi-analytical modeling compares well with the simulation results and allows one to consider plasma mixtures not accessible to simulations. Applications are given for the mix of materials in ICF experiments. A reduction of a multicomponent mixture to an effective binary mixture is also established in the hydrodynamic limit and compared with PIJ estimations for ICF relevant mixtures.

physics.plasm-ph↗

arXiv2018

Checking the Salpeter enhancement of nuclear reactions in asymmetric mixtures

We investigate the plasma enhancement of nuclear reactions in the intermediate coupling regime using orbital free molecular dynamics (OFMD) simulations. Mixtures of H-Cu and H-Ag serve as prototypes of simultaneous weak and strong couplings due to the charge asymmetry. Of particular importance is the partial ionization of Cu and Ag and the free electron polarization captured by OFMD simulations. By comparing a series of OFMD simulations at various concentrations and constant pressure to multi-component hyper netted chain (MCHNC) calculations of effective binary ionic mixtures (BIM), we set a general procedure for computing enhancement factors. The MCHNC procedure allows extension to very low concentrations (5% or less) and to very high temperatures (few keV) unreachable by the simulations. Enhancement factors for nuclear reactions rates extracted from the MCHNC approach are compared with the Salpeter theory in the weak and strong coupling regimes, and a new interpolation is proposed.

physics.plasm-ph↗

arXiv2013

Quantum Transport With Two Interacting Conduction Channels

The transport properties of a conduction junction model characterized by two mutually coupled channels that strongly differ in their couplings to the leads are investigated. Models of this type describe molecular redox junctions (where a level that is weakly coupled to the leads controls the molecular charge, while a strongly coupled one dominates the molecular conduction), and electron counting devices in which the current in a point contact is sensitive to the charging state of a nearby quantum dot. Here we consider the case where transport in the strongly coupled channel has to be described quantum mechanically (covering the full range between sequential tunneling and co-tunneling), while conduction through the weakly coupled channel is a sequential process that could by itself be described by a simple master equation. We compare the result of a full quantum calculation based on the pseudoparticle non-equilibrium Green function method to that obtained from an approximate mixed quantum-classical calculation, where correlations between the channels are taken into account through either the averaged rates or the averaged energy. We find, for the steady state current, that the approximation based on the averaged rates works well in most of the voltage regime, with marked deviations from the full quantum results only at the threshold for charging the weekly coupled level. These deviations are important for accurate description of the negative differential conduction behavior that often characterizes redox molecular junctions in the neighborhood of this threshold.

cond-mat.mes-hall↗

arXiv2012

Molecular nanoplasmonics: self-consistent electrodynamics in current carrying junctions

We consider a biased molecular junction subjected to external time-dependent electromagnetic field. We discuss local field formation due to both surface plasmon-polariton excitations in the contacts and the molecular response. Employing realistic parameters we demonstrate that such self-consistent treatment is crucial for proper description of the junction transport characteristics.

cond-mat.mes-hall↗