arXiv subjects

Alexander N. Grigorenko

Publications and source records attributed to Alexander N. Grigorenko.

9 recordsLinked to original sources

arXiv2025

Highly ordered LIPSS on Au thin film for plasmonic sensing fabricated by double femtosecond pulses

Periodic plasmonic arrays making possible excitations of surface lattice resonances (SLRs) or quasi-resonant features are of great importance for biosensing and other applications. Fabrication of such arrays over a large area is typically very costly and time-consuming when performed using conventional electron beam lithography and other methods, which reduce application prospects. Here, we propose a technique of double femtosecond pulse (~ 170 fs) laser-assisted structuring of thin (~ 32 nm) Au films deposited on a glass substrate and report a single-step fabrication of homogeneous and highly ordered Au-based Laser Induced Periodic Surface Structures (LIPSS) over a large area. Our experimental results unveil the key importance of the interpulse delay as the determining factor rendering possible the homogeneity of laser induced structures and confirm that highly ordered, functional LIPSS occur solely upon double pulse irradiation under a specific interpulse delay range. A theoretical investigation complements experimental results providing remarkable insights on the structure formation mechanism. Ellipsometric measurements show that such LIPSS structures can exhibit highly valuable plasmonic features in light reflection. In particular, we observed ultranarrow resonances associated with diffraction-coupled SLRs, which are of paramount importance for biosensing and other applications. The presented data suggest that femtosecond double pulse structuring of thin metal films can serve as a valuable and low-cost tool for a large-scale fabrication of highly ordered functional elements and structures.

cond-mat.mtrl-sci↗

arXiv2025

Quantifying hydrogen bonding using electrically tunable nanoconfined water

Hydrogen bonding plays a crucial role in biology and technology, yet it remains poorly understood and quantified despite its fundamental importance. Traditional models, which describe hydrogen bonds as electrostatic interactions between electropositive hydrogen and electronegative acceptors, fail to quantitatively capture bond strength, directionality, or cooperativity, and cannot predict the properties of complex hydrogen-bonded materials. Here, we introduce a novel approach that conceptualizes the effect of hydrogen bonds as elastic dipoles in an electric field, which captures a wide range of hydrogen bonding phenomena in various water systems. Using gypsum, a hydrogen bond heterostructure with two-dimensional structural crystalline water, we calibrate the hydrogen bond strength through an externally applied electric field. We show that our approach quantifies the strength of hydrogen bonds directly from spectroscopic measurements and reproduces a wide range of key properties of confined water reported in the literature. Using only the stretching vibration frequency of confined water, we can predict hydrogen bond strength, local electric field, O-H bond length, and dipole moment. Our work also introduces hydrogen bond heterostructures - a new class of electrically and chemically tunable materials that offer stronger, more directional bonding compared to van der Waals heterostructures, with potential applications in areas such as catalysis, separation, and energy storage.

cond-mat.mes-hall↗

arXiv2025

Visualization of topological shear polaritons in gypsum thin films

Low symmetry crystals have recently emerged as a platform for exploring novel light-matter interactions in the form of hyperbolic shear polaritons. These excitations exhibit unique optical properties such as frequency-dispersive optical axes and asymmetric light propagation and energy dissipation, which arise from the presence of non-orthogonal resonances. However, only non-vdW materials have been demonstrated to support hyperbolic shear polaritons, limiting their exotic properties and potential applications. Here we introduce for the first time novel shear phenomena in low symmetry crystal thin films by demonstrating the existence of elliptical and canalized shear phonon polaritons in gypsum, an exfoliable monoclinic sulphate mineral. Our results unveil a topological transition from hyperbolic shear to elliptical shear polaritons, passing through a canalization regime with strong field confinement. Importantly, we observe a significant slowdown of group velocity, reaching values as low as 0.0005c, highlighting the potential of gypsum for "slow light" applications and extreme light-matter interaction control. These findings expand the application scope of low-symmetry crystals with the benefits that an exfoliable material provides, such as stronger field confinement, tunability, and versatility for its incorporation in complex photonic devices that might unlock new optical phenomena at the nanoscale.

physics.optics↗

arXiv2023

Non-polaritonic effects in cavity-modified photochemistry

Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which changes to a molecular photoisomerisation process in the UV-vis spectral range were attributed to strong coupling of the molecules to visible light. We observed significant variations in photoisomerisation rates consistent with the original work; however, we found no evidence that these changes need to be attributed to strong coupling. Instead, we suggest that the photoisomerisation rates involved are most strongly influenced by the absorption of ultraviolet radiation in the cavity. Our results indicate that care must be taken to rule out non-polaritonic effects before invoking strong coupling to explain any changes of chemical properties arising in cavity-based experiments.

cond-mat.mes-hall↗

arXiv2021

Topological phase singularities in atomically thin high-refractive-index materials

Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, doping, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials can offer only a small optical phase delay - consequence of the atomic thickness. To address this issue, we combine films of 2D semiconductors which exhibit excitonic lines with the Fabry-Perot resonators of the standard commercial SiO$_2$/Si substrate, in order to realize topological phase singularities in reflection. Around these singularities, reflection spectra demonstrate rapid phase changes while the structure behaves as a perfect absorber. Furthermore, we demonstrate that such topological phase singularities are ubiquitous for the entire class of atomically thin TMDCs and other high-refractive-index materials, making it a powerful tool for phase engineering in flat optics. As a practical demonstration, we employ PdSe$_2$ topological phase singularities for a refractive index sensor and demonstrate its superior phase sensitivity compared to typical surface plasmon resonance sensors.

physics.optics↗

arXiv2019

Two-dimensional covalent crystals by chemical conversion of thin van der Waals materials

Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we use 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a non-layered, rhombohedral structure and therefore cannot be possibly obtained by exfoliation. The conversion of InSe into InF3 is found to be feasible for thicknesses down to three layers of InSe, and the obtained stable InF3 layers are doped with selenium. We study this new 2D material by optical, electron transport and Raman measurements and show that it is a semiconductor with a direct bandgap of 2.2 eV, exhibiting high optical transparency across the visible and infrared spectral ranges. We also demonstrate the scalability of our approach by chemical conversion of large-area, thin InSe laminates obtained by liquid exfoliation into InF3 films. The concept of chemical conversion of cleavable thin van der Waals crystals into covalently-bonded non-cleavable ones opens exciting prospects for synthesizing a wide variety of novel atomically thin covalent crystals.

cond-mat.mtrl-sci↗

arXiv2019

Direct retrieval method of the effective permittivity and permeability of bulk semi-infinite metamaterials by variable-angle spectroscopic ellipsometry

In this work, we present a simple method for the direct retrieval of the effective permittivity and permeability of a bulk semi-infinite metamaterial from variable-angle spectroscopic ellipsometry measurements. Starting from the well-known Fresnel equations, we derive an analytical expression in which unknown coefficients are fitted to the experimental data using a linear regression model. The effective permittivity and permeability are then determined by solving a simple system and the correct solution is selected based on physical criteria. As an example, the method is applied to the case of a self-assembled metamaterial exhibiting strong isotropic optical magnetism.

physics.optics↗

arXiv2016

Hierarchical self-assembly of nanoparticles for optical metamaterials

Hierarchical self-assembly arranges nanostructures at different length scales. It gradually becomes an effective method of fabricating artificial metamaterials from composite nanostructures tailored for a particular response. Hierarchical self-assembly overcomes shortcomings of "top-down" methods by significantly reducing fabrication time and making it possible to form bulk materials. Here we report an application of hierarchical self-assembly of metal nanoparticles for the creation of the first isotropic optical metamaterial with strong artificial magnetism in blue light. We have used colloidal self-assembly to create artificial "nanomolecules" that generate the desired magnetic response and microfluidic self-assembly to produce a bulk metastructure. We demonstrate that the magnetic response of the final material is accurately described by an isotropic magnetic permeability that satisfies the principle of locality. Our approach unlocks the fabrication of large volumes of composite nanomaterials. Moreover, the spatial disorder inherent to this "bottom-up" method holds the key to solving the non-locality problem. The technique can be readily extended to the future generations of low-loss optical metamaterials made of dielectric nano-blocks to bypass the limitations of optical losses associated with plasmonic resonances in noble metals.

cond-mat.mtrl-sci↗

arXiv2016

Current-induced birefringent absorption and non-reciprocal plasmons in graphene

We present extensive calculations of the optical and plasmonic properties of a graphene sheet carrying a dc current. By calculating analytically the density-density response function of current-carrying states at finite temperature, we demonstrate that an applied dc current modifies the Pauli blocking mechanism and that absorption acquires a birefringent character with respect to the angle between the in-plane light polarization and current flow. Employing the random phase approximation at finite temperature, we show that graphene plasmons display a degree of non-reciprocity and collimation that can be tuned with the applied current. We discuss the possibility to measure these effects.

cond-mat.mes-hall↗